Total Iodine Quantification and In Vitro Bioavailability Study in Abalone (Haliotis discus hannai) Using Inductively Coupled Plasma Mass Spectrometry.

The aim of this study is to determine the total iodine content in Korean abalone (Haliotis discus hannai) and to investigate the bioavailability of iodine using an in vitro method. This research paper focuses on total iodine quantification in abalone (Haliotis discus hannai) and its components (viscera and muscle) using inductively coupled plasma mass spectrometry (ICP-MS). Additionally, an in vitro bioavailability study explored iodine absorption potential. Abalone pretreatment involved both the European standard method (ES) and microwave-assisted extraction method (MAE). The limits of detection (LOD) were 0.11 ng/g for both ES and MAE, with a limit of quantification (LOQ) of 5.4 ng/g for MAE. Accuracy, assessed using a reference material (fish muscle, ERM-BB422), showed values of 1.5 ± 0.010 mg/kg for ES and 1.6 ± 0.066 mg/kg for MAE, within an acceptable range of 1.4 ± 0.42 mg/kg. Precision, evaluated using the Horwitz ratio (HorRat) with a reference material, was determined to be 0.45 for ES and 0.27 for MAE. Therefore, total iodine contents were estimated as 74 ± 2.2 µg/g for abalone viscera and 17 ± 0.77 µg/g for abalone muscle with ES, and 76 ± 1.0 µg/g for abalone viscera and 17 ± 0.51 µg/g for abalone muscle with MAE. Recovery tests demonstrated an acceptable range of 90-110%. In the in vitro bioavailability assessment, digestion efficiency yielded ranges of 42-50.2% for viscera and 67-115% for muscle. Absorption efficiency variations were determined as 37-43% for viscera and 48-75% for muscle.

Characterization of Polyvinyl Alcohol (PVA)/Polyacrylic Acid (PAA) Composite Film-Forming Solutions and Resulting Films as Affected by Beeswax Content.

Recently, the food packaging industry has focused on developing an eco-friendly and sustainable food packaging system. This study describes the effect of beeswax on the physical, structural, and barrier properties of a polyvinyl alcohol (PVA)/polyacrylic acid (PAA) composite film. The incorporation of beeswax improved the barrier properties against oxygen, water, and oil. However, the addition of a high content of beeswax caused phase separation in the film-forming solution. The destabilization mechanisms such as clarification and creaming formation in the film-forming solution were revealed by turbidimetric analysis. The results of scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) indicates that non-homogeneous structures in the film-forming solution were formed as a function of increased beeswax content due to the agglomeration of beeswax. The mechanical properties of the films were also evaluated to determine the most appropriate content of beeswax. There was a slight decrease in tensile strength and an increase in elongation as beeswax content increased up to 10%. Thus, the PVA/PAA composite film with 10% beeswax was chosen for further applications. In summary, the PVA/PAA composite film developed in this study with 10% beeswax exhibited a significant improvement in barrier properties and has the potential for use in commerce.

Determination of vitamin K encapsulated into lipid nanocarriers by dispersive liquid-liquid microextraction combined with liquid chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry.

Dispersive liquid-liquid microextraction was used in conjunction with liquid chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry to quantitate vitamins K1 and K2 in vitamin-fortified emulsions, and vital microextraction parameters were optimized using response surface methodology coupled with Box-Behnken design. Under optimal microextraction conditions, highly linear (R 2 > .999) calibration curves were obtained for both vitamins in a broad concentration range (1-1000 µg/L), and vitamin recoveries exceeded 90%. The detection and quantitation limits equaled 1.89 and 5.72 µg/L for vitamin K1, respectively, and 5.00 and 15.15 µg/L for vitamin K2, respectively. When applied to vitamin-K-loaded nanoemulsions and solid lipid nanoparticles, the developed method achieved excellent results, outperforming the currently employed Korean Food Code method, and therefore holding great promise for the quantitation of vitamin K in vitamin-fortified food products.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers.

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and ß-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

High-pressure induced structural modification of porcine myofibrillar protein and its relation to rheological and emulsifying properties.

Here, we investigated the effects of high-pressure homogenization (HPH) on the physicochemical, rheological, and emulsifying properties of myofibrillar proteins (MFPs). The mean particle size of MFPs treated by HPH with different pressures (0-150 MPa) decreased from 886.0 ± 120.2 nm to 172.6 ± 13.7 nm with increasing HPH pressure. In addition, more uniform and homogeneous protein particles were obtained as the HPH pressure was increased. In SDS-PAGE, the band intensities of high molecular weight proteins (200 kDa) decreased and the intensities of some of the smaller molecular fractions (70-120 kDa) increased when the MFPs were subjected to HPH treatment at more than 60 MPa owing to the fragmentation of high molecular weight proteins, such as myosin heavy chains. The surface hydrophobicity of MFPs increased with increasing HPH pressure owing to the exposure of buried hydrophobic groups by protein unfolding. In the rheological study, the MFP dispersions exhibited shear thinning fluid behavior, but the MFP dispersion homogenized at high pressure (120-150 MPa) presented close to Newtonian fluid behavior with low viscosity. The emulsifying activity (EA) and emulsion stability index (ESI) of MFPs improved with increasing HPH pressures. The MFPs treated with HPH at different pressures were used for o/w emulsion preparation, and their dispersion stabilities were investigated during storage. The emulsion systems stabilized with MFPs pressurized at more than 60 MPa showed comparatively less cream formation in the top layer, indicating high dispersion stability.

Cholecalciferol- and α-tocopherol-loaded walnut oil emulsions stabilized by whey protein isolate and soy lecithin for food applications.

BACKGROUND: To overcome the limitations in the use of protein as an emulsifier, soy lecithin, a natural surfactant, was used along with whey protein isolate (WPI) to produce o/w emulsions containing cholecalciferol and α-tocopherol. The physical stability of the emulsions prepared with WPI and varying concentrations of lecithin (0, 1, 2, and 3% w/w) was measured in different heat, pH, and ionic-strength food environmental conditions. RESULTS: All emulsions were shown to be less than 250 nm in size and less than 0.3 in polydispersity index (PDI). The morphology of the emulsions was spherical, and the droplets of the emulsion containing lecithin were thicker and larger than those of the emulsion without lecithin (WPI_L0). After autoclaving, WPI_L0 increased in size from 197.8 ± 1.7 nm to 528.5 ± 28.4 nm, and the retention of cholecalciferol and α-tocopherol decreased to 40.83 ± 0.63% and 49.68 ± 1.84%, respectively. At pH 5.5, near the isoelectric point of WPI, WPI_L0 increased in size due to aggregation, but emulsions containing lecithin remained stable at a PDI under 0.3. Turbiscan stability index of the emulsion prepared with WPI and 3% lecithin was the lowest, indicating good storage stability. In addition, it was confirmed that the higher the lecithin content, the higher the viscosity, and the higher the amount of free fatty acids released in the in vitro digestion model. CONCLUSION: This study can provide theoretical evidence for enhancing the physical stability of protein emulsions by co-stabilization with lecithin, promoting their application in various foods. © 2022 Society of Chemical Industry.

Effects of added cereal fibers on the quality characteristics of black pudding prepared with duck blood.

We investigated the physicochemical and rheological properties of black pudding prepared with duck blood using various combinations of cereal fiber sources: oat, buckwheat, quinoa, amaranth, and sorghum. The processing yield of black pudding made with duck blood and the cereals was higher than that of the control (without cereals) in all cases (P < 0.05). The moisture content of the black pudding was the highest in the buckwheat and amaranth groups (P < 0.05). The water activity, pH, and yellowness of the black pudding combined with duck blood and cereals were lower than that of the control (P < 0.05). The hardness of the black pudding with duck blood and cereals was higher than that of the control (P < 0.05), except for the amaranth group. The cohesiveness, gumminess, and chewiness of the black pudding with duck blood and cereals were higher than that of the control (P < 0.05). Differential scanning colorimetry showed distinct peak points according to treatment at the same temperature, and all treatments exhibited 2 peak temperatures, except for sorghum. The viscosities of all samples, including the control, decreased as the shear rate increased, and the viscosity of the black pudding with oat was slightly lower than that of the other samples. Thus, black pudding prepared with duck blood and cereal fibers showed excellent physicochemical and rheological properties, suggesting an improved processing method. These findings can further the development of products using duck blood as a valuable nutritional source rather than being lost as a by-product during slaughter.

Physiochemical properties of reduced-fat duck meat emulsion systems: effects of preemulsification with vegetable oils and duck skin.

The effects of commercial vegetable oils and duck skin on quality characteristics of a reduced-fat duck meat emulsion were examined. The cooking loss, emulsion stability, and hardness were lower for emulsions preemulsified with vegetable oils and duck skin (P < 0.05) than for the control. Storage modulus (G') and loss modulus (G″) of reduced-fat duck meat emulsions treated with corn, grape seed, soy, and olive oils were similar to the values of control; the highest G' and G″ values were reported for the reduced-fat duck meat emulsion treated with coconut oil. Myofibril protein solubility was the highest for the reduced-fat duck meat emulsion treated with coconut oil and duck skin (P < 0.05). Replacing of pork back fat with different vegetable oils for emulsification may impart superior quality to reduced-fat duck meat emulsion. We recommend preemulsion with vegetable oils and duck skin to enhance the quality characteristics of reduced-fat duck meat emulsion.

Physical and turbidimetric properties of cholecalciferol- and menaquinone-loaded lipid nanocarriers emulsified with polysorbate 80 and soy lecithin.

The present study aimed to investigate the physical and turbidimetric properties of cholecalciferol- and menaquinone-loaded lipid nanocarriers emulsified with different ratios of polysorbate 80 and soy lecithin. The lipid nanocarriers were subjected to three different heat treatments, LTLT (low temperature long time), HTST (high temperature short time), and autoclave treatments. Both cholecalciferol and menaquinone were successfully encapsulated in lipid nanocarriers and there was little loss of them during preparation. The droplet size of lipid nanocarriers emulsified with only polysorbate 80 increased and its PDI became larger than 0.3 after autoclave treatment. Moreover, 30.9% and 49.4% of cholecalciferol and menaquinone, respectively, were lost. In turbidimetric analysis, the destabilization by creaming formation in the upper layer of the lipid nanocarriers emulsified with a high polysorbate ratio was observed. However, the use of combination of both emulsifiers inhibited destabilization by flocculation as well as retained the cholecalciferol and menaquinone after all heat treatments.

Anti-Obesity Effects of Sargassum thunbergii via Downregulation of Adipogenesis Gene and Upregulation of Thermogenic Genes in High-Fat Diet-Induced Obese Mice.

Obesity is a metabolic disease characterized by an increased risk of type 2 diabetes, hypertension, and cardiovascular disease. We have previously reported that compounds isolated from brown alga, Sargassum thunbergii (ST; Sargassum thunbergii (Mertens ex Roth) Kuntze), inhibit adipogenesis in 3T3-L1 cells. However, the in vivo anti-obesity effects of these compounds have not been previously reported. Therefore, the objective of this study was to determine the effects of ST on weight loss, fat accumulation, as well as risk factors for type 2 diabetes and cardiovascular disease in high-fat diet (HFD)-induced obese mice. ST treatment significantly decreased body weight and fat accumulation in HFD-induced obese mice, while reducing insulin and factors related to cardiovascular diseases (triglyceride and total cholesterol) in serum. ST-induced downregulation of PPARγ in white adipose tissue, and upregulation of the thermogenic genes, UCP-1 and UCP-3, in brown adipose tissue was also observed. In addition, oral administration of ST reduced the occurrence of fatty liver, as well as the amount of white adipose tissue in HFD mice. Cumulatively, these results suggest that ST exerts anti-obesity effects and may serve as a potential anti-obesity therapeutic agent.

Effect of Interaction between Mealworm Protein and Myofibrillar Protein on the Rheological Properties and Thermal Stability of the Prepared Emulsion Systems.

In this study, we investigated the effect of replacing myofibrillar protein (pork ham) with edible insect proteins (Tenebrio molitor L.) in meat emulsion systems and examined the interaction between the two types of proteins. We also evaluated the rheological properties and thermal stability of these meat emulsions. The replacement ratios of myofibrillar protein and edible insect protein were as follows: 100:0 (EI0), 80:20 (EI20), 60:40 (EI40), 40:60 (EI60), 20:80 (EI80), and 0:100 (EI100). The pH, redness, and yellowness of the emulsion systems, after replacing myofibrillar protein with T. molitor protein, significantly increased with T. molitor protein concentrations. In contrast, the lightness, hardness, cohesiveness, gumminess, chewiness, apparent viscosity, and differential scanning calorimetry (DSC) of the emulsion systems decreased significantly with increasing T. molitor protein concentrations. The backscattering values of EI0, EI20, and EI40 decreased evenly in all spots of the dispersions as the storage time increased. Thus, up to 40% of pork myofibrillar protein could be replaced with T. molitor protein in meat emulsion systems. The results also suggest that the interaction between edible insect protein and myofibrillar protein degrades the rheological properties and thermal stability of the meat emulsion systems.

Effect of different cooking methods on the content and bioaccessibility of iodine components in abalone (Haliotis discus hannai).

The present study aimed to evaluate the changes in total iodine and iodine species (iodide, iodate, 3-iodo-l-tyrosine, and 3,5-diiodo-l-tyrosine) content in abalone after different treatments (raw, semi-drying, steaming, grilling, and boiling) and in-vitro digestion using high-performance liquid chromatography-inductively coupled plasma-mass spectroscopy (HPLC-ICP-MS). The highest reduction in iodine content was found in boiled abalone (64.95%), followed by steamed (32.40%) and grilled (32.11%) abalones. There is no significant difference between iodine content of raw and semi-dried abalone. Absorption efficiency was determined by an in vitro digestion procedure using simulated gastro/intestinal solutions. Unlike total iodine content after cooking, absorption efficiency increased after cooking. Absorption efficiency of semi-dried abalone is the highest (28.53%), followed by boiled (23.85%), grilled (22.62%), steamed (21.51%), and raw (12.20%) abalones. Iodide was the major form of iodine present in the abalone after cooking and in vitro digestion. No iodate was observed, and the organic iodine content was very low.

Effect of Hydrocolloids on Rheological Properties and Printability of Vegetable Inks for 3D Food Printing.

In food ink systems in which the particles are dispersed in a hydrocolloid matrix, the source of the particles and the particle content are the main factors affecting the printability and rheological properties of the system. In this study, different contents (10% and 30% w/w) of vegetable (broccoli, spinach, or carrot) powders were added to hydrocolloid matrices with different hydration properties, and their influence on the printability and rheological properties was investigated. At low powder contents (10%), slight differences in the printability and rheological values were observed between the different vegetable sources in all hydrocolloids. When the powder content was increased to 30%, the hydrocolloid with the lowest water hydration capacity, hydroxypropyl methylcellulose, showed the greatest differences in rheology and printability when different vegetable sources were used. Xanthan gum, with its higher water hydration capacity, inhibited the swelling of the particles, thus minimizing the increase in the rheological values at high volume fractions of powder and reducing the differences in printability between different vegetable sources. Confocal laser scanning microscopy analysis of the vegetable inks showed that xanthan gum inhibited swelling of the particles regardless of the vegetable powder source. The mixtures using xanthan gum could be smoothly extruded from the nozzle due to their low extruded hardness (2.96 ± 0.23 to 3.46 ± 0.16 kg), and the resulting objects showed high resolution without collapse over time. PRACTICAL APPLICATION: The powder-based texturization technology introduced in this study provides a standardized method of preparing food ink that can be universally applied to all food materials that can be powdered. In addition, the present invention can be applied to a 3D printing technique in which a powder and a hydrocolloid matrix are independently stored and mixed immediately before printing. This technique can minimize the inherent rheological differences between formulations with different food sources and compositions.

Influence of Food with High Moisture Content on Oxygen Barrier Property of Polyvinyl Alcohol (PVA)/Vermiculite Nanocomposite Coated Multilayer Packaging Film.

This study investigates the potential complications in applying nanoclay-based waterborne coating to packaging films for food with high moisture content. Multilayer packaging films were prepared by dry laminating commercially available polyvinyl alcohol (PVA)/vermiculite nanocomposite coating films and linear low-density polyethylene film, and the changes in oxygen barrier properties were investigated according to different relative humidity using 3 types of food simulants. When the relative humidity was above 60%, the oxygen permeability increased sharply, but this was reversible. Deionized water and 3% acetic acid did not cause any large structural change in the PVA/vermiculite nanocomposite but caused a reversible deterioration of the oxygen barrier properties. In contrast, 50% ethanol, a simulant for the semifatty food, induced irreversible structural changes with deterioration of the oxygen barrier property. These changes are due to the characteristics of PVA rather than vermiculite. PRACTICAL APPLICATION: We believe this manuscript would be of interest to the wide group of researchers, organizations, and companies in the field of developing nanoclay-based gas barrier packaging for foods with high moisture content. Hence, we wish to diffuse our knowledge to the scientific community.

Thyme Oil Encapsulated in Halloysite Nanotubes for Antimicrobial Packaging System.

An antimicrobial capsule releasing thyme oil was developed using modified halloysite nanotubes (HNTs). In order to increase the pore volume, HNTs were treated with 5.0 mol/L NaOH solution, which resulted in the encapsulation of more thyme oil molecules inside the HNTs. The morphology of the raw HNTs and NaOH-treated HNTs (N-HNTs) was characterized using transmission electron microscopy and nitrogen adsorption-desorption analysis. The loading capacity increased from 180.7 ± 12.7 to 256.4 ± 16.7 mg thyme oil/g HNT after the NaOH treatment. The aerial release characteristics of thyme oil from both the HNT capsules were investigated in a closed-package atmosphere system at 4, 25, and 40 °C. The antimicrobial activity of the capsule against Escherichia coli O157:H7 was determined using the vapor phase assay. Moreover, the antimicrobial effects of the capsule against E. coli O157:H7, total mesophilic aerobic bacteria (MAB), and molds and yeasts (MY) on the surfaces of cherry tomatoes were investigated at 4 and 25 °C for 5 d. When the cherry tomatoes were exposed to the thyme oil-loaded N-HNT capsule, the number of E. coli O157:H7, MAB, and MY significantly reduced during storage.