White Roman Goose Feather-Inspired Unidirectionally Inclined Conical Structure Arrays for Switchable Anisotropic Self-Cleaning.

White Roman goose (Anser anser domesticus) feathers, comprised of oriented conical barbules, are coated with gland-secreted preening oils to maintain a long-term nonwetting performance for surface swimming. The geese are accustomed to combing their plumages with flat bills in case they are contaminated with oleophilic substances, during which the amphiphilic saliva spread over the barbules greatly impairs their surface hydrophobicities and allows the trapped contaminants to be anisotropically self-cleaned by water flows. Particularly, the superhydrophobic behaviors of the goose feathers are recovered as well. Bioinspired by the switchable anisotropic self-cleaning functionality of white Roman geese, superhydrophobic unidirectionally inclined conical structures are engineered through the integration of a scalable colloidal self-assembly technology and a colloidal lithographic approach. The dependence of directional sliding properties on the shape, inclination angle, and size of conical structures is systematically investigated in this research. Moreover, their switchable anisotropic self-cleaning functionalities are demonstrated by Sudan blue II/water (0.01%) separation performances. The white Roman goose feather-inspired coatings undoubtedly offer a new concept for developing innovative applications that require directional transportation and the collection of liquids.

Iron Sulfide Microspheres Supported on Cellulose-Carbon Nanotube Conductive Flexible Film as an Electrode Material for Aqueous-Based Symmetric Supercapacitors with High Voltage.

Nanostructured iron disulfide (FeS2) was uniformly deposited on regenerated cellulose (RC) and oxidized carbon nanotube (CNT)-based composite films using a simple chemical bath deposition method to form RC/CNT/FeS2 composite films. The RC/CNT composite film served as an ideal substrate for the homogeneous deposition of FeS2 microspheres due to its unique porous architecture, large specific surface area, and high conductivity. Polypyrrole (PPy), a conductive polymer, was coated on the RC/CNT/FeS2 composite to improve its conductivity and cycling stability. Due to the synergistic effect of FeS2 with high redox activity and PPy with high stability and conductivity, the RC/CNT/FeS2/PPy composite electrode exhibited excellent electrochemical performance. The RC/CNT/0.3FeS2/PPy-60 composite electrode tested with Na2SO4 aqueous electrolyte could achieve an excellent areal capacitance of 6543.8 mF cm-2 at a current density of 1 mA cm-2. The electrode retained 91.1% of its original capacitance after 10,000 charge/discharge cycles. Scanning electron microscopy (SEM) images showed that the ion transfer channels with a pore diameter of 5-30 µm were formed in the RC/CNT/0.3FeS2/PPy-60 film after a 10,000 cycle test. A symmetrical supercapacitor device composed of two identical pieces of RC/CNT/0.3FeS2/PPy-60 composite electrodes provided a high areal capacitance of 1280 mF cm-2, a maximum energy density of 329 µWh cm-2, a maximum power density of 24.9 mW cm-2, and 86.2% of capacitance retention after 10,000 cycles at 40 mA cm-2 when tested at a wide voltage window of 1.4 V. These results demonstrate the greatest potential of RC/CNT/FeS2/PPy composite electrodes for the fabrication of high-performance symmetric supercapacitors with high operating voltages.

Leafhopper-inspired reversibly switchable antireflection coating with sugar apple-like structure arrays.

Optical coatings with reversibly tunable antireflective characteristics hold a tremendous potential for next generation optical energy-related applications. Bioinpsired by the camouflage behavior of small yellow leafhoppers, silica hollow sphere/shape memory polymer composites are self-assembled using a non-lithography-based approach. The average visible transmittance of the as-patterned hierarchical structure array-covered substrate is increased by ca. 6.3% at normal incident, and even improved by more than 20% for an incident angle of 75°. Interestingly, the broadband omnidirectional antireflection performance can be reversibly erased and recovered by applying external stimuli under ambient conditions. To gain a better understanding, its reversibility, mechanical robustness, and the structure-shape effect on the antireflective properties are systematically investigated in this research.

Enhanced Photovoltaic Performance of Inverted Perovskite Solar Cells through Surface Modification of a NiOx-Based Hole-Transporting Layer with Quaternary Ammonium Halide-Containing Cellulose Derivatives.

In this study, we positioned three quaternary ammonium halide-containing cellulose derivatives (PQF, PQCl, PQBr) as interfacial modification layers between the nickel oxide (NiOx) and methylammonium lead iodide (MAPbI3) layers of inverted perovskite solar cells (PVSCs). Inserting PQCl between the NiOx and MAPbI3 layers improved the interfacial contact, promoted the crystal growth, and passivated the interface and crystal defects, thereby resulting in MAPbI3 layers having larger crystal grains, better crystal quality, and lower surface roughness. Accordingly, the photovoltaic (PV) properties of PVSCs fabricated with PQCl-modified NiOx layers were improved when compared with those of the pristine sample. Furthermore, the PV properties of the PQCl-based PVSCs were much better than those of their PQF- and PQBr-based counterparts. A PVSC fabricated with PQCl-modified NiOx (fluorine-doped tin oxide/NiOx/PQCl-0.05/MAPbI3/PC61BM/bathocuproine/Ag) exhibited the best PV performance, with a photoconversion efficiency (PCE) of 14.40%, an open-circuit voltage of 1.06 V, a short-circuit current density of 18.35 mA/cm3, and a fill factor of 74.0%. Moreover, the PV parameters of the PVSC incorporating the PQCl-modified NiOx were further enhanced when blending MAPbI3 with PQCl. We obtained a PCE of 16.53% for this MAPbI3:PQCl-based PVSC. This PQCl-based PVSC retained 80% of its initial PCE after 900 h of storage under ambient conditions (30 °C; 60% relative humidity).

Why teaching innovation matters: Evidence from a pre- versus peri-COVID-19 pandemic comparison of student evaluation data.

The COVID-19 pandemic has robustly affected global education environments, so higher education institutions need to emphasize innovation and creativity in educational methods for teachers to improve their teaching performance as well as enhance the engagement and motivation of students in this changing environment. Accordingly, it is essential to discuss the role of teaching innovation in the setting of the COVID-19 pandemic compared to the pre-COVID-19 period. The aim of this study is to empirically validate the importance of teaching innovation in student evaluation of teaching before and during the COVID-19 pandemic. Data were collected from the medical college of a comprehensive university in Taiwan and were subjected to t-tests and multiple linear regression analysis. Findings from a quantitative study with 44 teachers revealed that teaching innovation was positively correlated to student evaluation of teaching. We also found that teachers who implemented teaching innovation strategies performed better than those teachers who used conventional teaching strategies on student evaluation of teaching. In particular, teaching innovative teachers had improvement in student evaluation of teaching during the time of the COVID-19 pandemic, but not non-teaching innovative teachers. The evidence from this study suggests that teaching innovation can not only enhance teachers' teaching development and performance but also boost students' motivation for learning, especially in the time of the COVID-19 pandemic. Our findings have important implications for future research on teaching innovation and for higher education institutions and faculty wishing to provide high-quality learning environments to their students.

Deep Learning Applied to Defect Detection in Powder Spreading Process of Magnetic Material Additive Manufacturing.

Due to its advantages of high customization and rapid production, metal laser melting manufacturing (MAM) has been widely applied in the medical industry, manufacturing, aerospace and boutique industries in recent years. However, defects during the selective laser melting (SLM) manufacturing process can result from thermal stress or hardware failure during the selective laser melting (SLM) manufacturing process. To improve the product's quality, the use of defect detection during manufacturing is necessary. This study uses the process images recorded by powder bed fusion equipment to develop a detection method, which is based on the convolutional neural network. This uses three powder-spreading defect types: powder uneven, powder uncovered and recoater scratches. This study uses a two-stage convolutional neural network (CNN) model to finish the detection and segmentation of defects. The first stage uses the EfficientNet B7 to classify the images with/without defects, and then to locate the defects by evaluating three different instance segmentation networks in second stage. Experimental results show that the accuracy and Dice measurement of Mask-R-CNN network with ResNet 152 backbone can reach 0.9272 and 0.9438. The computational time of an image only takes approximately 0.2197 sec. The used CNN model meets the requirements of the early detected defects, regarding the SLM manufacturing process.

Lignin-Derived Quinone Redox Moieties for Bio-Based Supercapacitors.

Because of their rapid charging and discharging, high power densities, and excellent cycling life stabilities, supercapacitors have great potential for use in electric vehicles, portable electronics, and for grid frequency modulation. The growing need for supercapacitors that are both efficient and ecologically friendly has generated curiosity in developing sustainable biomass-based electrode materials and electrolytes. Lignin, an aromatic polymer with remarkable electroactive redox characteristics and a large number of active functional groups, is one such candidate for use in renewable supercapacitors. Because its chemical structure features an abundance of quinone groups, lignin undergoes various surface redox processes, storing and releasing both electrons and protons. Accordingly, lignin and its derivatives have been tested as electroactive materials in supercapacitors. This review discusses recent examples of supercapacitors incorporating electrode materials and electrolytes derived from lignin, focusing on the pseudocapacitance provided by the quinone moieties, with the goal of encouraging the use of lignin as a raw material for high-value applications. Employing lignin and its derivatives as active materials in supercapacitor electrodes and as a redox additive in electrolytes has the potential to minimize environmental pollution and energy scarcity while also providing economic benefits.

Recent Progress in Conducting Polymer Composite/Nanofiber-Based Strain and Pressure Sensors.

The Conducting of polymers belongs to the class of polymers exhibiting excellence in electrical performances because of their intrinsic delocalized π- electrons and their tunability ranges from semi-conductive to metallic conductive regime. Conducting polymers and their composites serve greater functionality in the application of strain and pressure sensors, especially in yielding a better figure of merits, such as improved sensitivity, sensing range, durability, and mechanical robustness. The electrospinning process allows the formation of micro to nano-dimensional fibers with solution-processing attributes and offers an exciting aspect ratio by forming ultra-long fibrous structures. This review comprehensively covers the fundamentals of conducting polymers, sensor fabrication, working modes, and recent trends in achieving the sensitivity, wide-sensing range, reduced hysteresis, and durability of thin film, porous, and nanofibrous sensors. Furthermore, nanofiber and textile-based sensory device importance and its growth towards futuristic wearable electronics in a technological era was systematically reviewed to overcome the existing challenges.

Fabrication and Characterization of an Efficient Inverted Perovskite Solar Cells with POSS Passivating Hole Transport Layer.

Polyhedral oligomeric silsesquioxane (POSS), featuring a hollow-cage or semi-cage structure is a new type of organic-inorganic hybrid nanoparticles. POSS combines the advantages of inorganic components and organic components with a great potential for optoelectronic applications such as in emerging perovskite solar cells. When POSS is well dispersed in the polymer matrix, it can effectively improve the thermal, mechanical, magnetic, acoustic, and surface properties of the polymer. In this study, POSS was spin-coated as an ultra-thin passivation layer over the hole transporting layer of nickel-oxide (NOx) in the structure of a perovskite solar cell. The POSS incorporation led to a more hydrophobic and smoother surface for further perovskite deposition, resulting in the increase in the grain size of perovskite. An appropriate POSS passivation layer could effectively reduce the recombination of the electron and hole at grain boundaries and increase the short-circuit current from 18.0 to 20.5 mA·cm-2. Moreover, the open-circuit voltage of the cell could slightly increase over 1 V.

Antibacterial Activity and Protection Efficiency of Polyvinyl Butyral Nanofibrous Membrane Containing Thymol Prepared through Vertical Electrospinning.

Human safety, health management, and disease transmission prevention have become crucial tasks in the present COVID-19 pandemic situation. Masks are widely available and create a safer and disease transmission-free environment. This study presents a facile method of fabricating masks through electrospinning nontoxic polyvinyl butyral (PVB) polymeric matrix with the antibacterial component Thymol, a natural phenol monoterpene. Based on the results of Japanese Industrial Standards and American Association of Textile Chemists and Colorists methods, the maximum antibacterial value of the mask against Gram-positive and Gram-negative bacteria was 5.6 and 6.4, respectively. Moreover, vertical electrospinning was performed to prepare Thymol/PVB nanofiber masks, and the effects of parameters on the submicron particulate filtration efficiency (PFE), differential pressure, and bacterial filtration efficiency (BFE) were determined. Thorough optimization of the small-diameter nanofiber-based antibacterial mask led to denser accumulation and improved PFE and pressure difference; the mask was thus noted to meet the present pandemic requirements. The as-developed nanofibrous masks have the antibacterial activity suggested by the National Standard of the Republic of China (CNS 14774) for general medical masks. Their BFE reaches 99.4%, with a pressure difference of <5 mmH2O/cm2. The mask can safeguard human health and promote a healthy environment.

Enhanced Photovoltaic Properties of Perovskite Solar Cells by Employing Bathocuproine/Hydrophobic Polymer Films as Hole-Blocking/Electron-Transporting Interfacial Layers.

In this study, we improved the photovoltaic (PV) properties and storage stabilities of inverted perovskite solar cells (PVSCs) based on methylammonium lead iodide (MAPbI3) by employing bathocuproine (BCP)/poly(methyl methacrylate) (PMMA) and BCP/polyvinylpyrrolidone (PVP) as hole-blocking and electron-transporting interfacial layers. The architecture of the PVSCs was indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/MAPbI3/[6,6]-phenyl-C61-butyric acid methyl ester/BCP based interfacial layer/Ag. The presence of PMMA and PVP affected the morphological stability of the BCP and MAPbI3 layers. The storage-stability of the BCP/PMMA-based PVSCs was enhanced significantly relative to that of the corresponding unmodified BCP-based PVSC. Moreover, the PV performance of the BCP/PVP-based PVSCs was enhanced when compared with that of the unmodified BCP-based PVSC. Thus, incorporating hydrophobic polymers into BCP-based hole-blocking/electron-transporting interfacial layers can improve the PV performance and storage stability of PVSCs.

Preparations of Tough and Conductive PAMPS/PAA Double Network Hydrogels Containing Cellulose Nanofibers and Polypyrroles.

To afford an intact double network (sample abbr.: DN) hydrogel, two-step crosslinking reactions of poly(2-acrylamido-2-methylpropanesulfonic acid) (i.e., PAMPS first network) and then poly(acrylic acid) (i.e., PAA second network) were conducted both in the presence of crosslinker (N,N'-methylenebisacrylamide (MBAA)). Similar to the two-step processes, different contents of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) oxidized cellulose nanofibers (TOCN: 1, 2, and 3 wt.%) were initially dispersed in the first network solutions and then crosslinked. The TOCN-containing PAMPS first networks subsequently soaked in AA and crosslinker and conducted the second network crosslinking reactions (TOCN was then abbreviated as T for DN samples). As the third step, various (T-)DN hydrogels were then treated with different concentrations of FeCl3(aq) solutions (5, 50, 100, and 200 mM). Through incorporations of ferric ions into (T-)DN hydrogels, notably, three purposes are targeted: (i) strengthen the (T-)DN hydrogels through ionic bonding, (ii) significantly render ionic conductivity of hydrogels, and (iii) serve as a catalyst for the forth step to proceed with in situ chemical oxidative polymerizations of pyrroles to afford polypyrrole-containing (sample abbr.: Py) hydrogels [i.e., (T-)Py-DN samples]. The characteristic functional groups of PAMPS, PAA, and Py were confirmed by FT-IR. Uniform microstructures were observed by cryo scanning electron microscopy (cryo-SEM). These results indicated that homogeneous composites of T-Py-DN hydrogels were obtained through the four-step process. All dry samples showed similar thermal degradation behaviors from the thermogravimetric analysis (TGA). The T2-Py5-DN sample (i.e., containing 2 wt.% TOCN with 5 mM FeCl3(aq) treatment) showed the best tensile strength and strain at breaking properties (i.e., σTb = 450 kPa and εTb = 106%). With the same compositions, a high conductivity of 3.34 × 10-3 S/cm was acquired. The tough T2-Py5-DN hydrogel displayed good conductive reversibility during several "stretching-and-releasing" cycles of 50-100-0%, demonstrating a promising candidate for bioelectronic or biomaterial applications.

Evaluation of a Novel Nanodroplet Cutting Fluid for Diamond Turning of Optical Polymers.

In this study, a novel nanodroplet cutting fluid (NDCF), consisting of emulsified water and oil nanodroplets, was developed to improve the surface quality of the single-point diamond-turned optical polymers. This developed NDCF was able to penetrate the chip-tool interface, contributing to both cooling and lubricating effects. The performance of NDCF was evaluated from perspectives of the surface irregularity, roughness, and cutting force of the machined groove in a series of taper cutting experiments. Meanwhile, a high-quality optical surface was obtained and the micro-level form error was reduced in the diamond turning of a Polymethylmethacrylate (PMMA) microlens array.

Role of gender in the survival outcome of acute phase of major trauma: A nationwide, population-based study.

BACKGROUND: Animal models of trauma have shown that females have better posttraumatic survival; however, results of previous studies on the influence of gender on major trauma patients have been controversial. This study aimed to evaluate the association between gender and survival in major trauma patients. METHODS: We retrospectively analyzed patients registered in Taiwan's National Health Insurance Research Database between 2008 and 2012 with the diagnosis codes 800-939 and 950-957 (International Classification of Diseases, ninth revision, clinical modification). Data on gender, age, catastrophic illness, and new injury severity score (NISS) ≥16 were collected for comparing patients' mortality after trauma. Propensity score matching (PSM) was performed to eliminate dissimilarities in age, comorbidities, NISS, and primary traumatic regions between the genders. RESULTS: Among 10 012 major trauma patients included in the study cohort, 28.8% (n = 2880) were women. The PSM patient group consisted of 50% (2876 of 5752) women. Women had a higher 30-day (15.4% of women vs 13.8% of men; p < 0.05) and hospital (16.1% of women vs 14.5% of men; p < 0.05) mortality and lower incidence rates of acute respiratory dysfunction (62.5% of women vs 65.9% of men; p < 0.005) and acute hepatic dysfunction (0.8% of women vs 2.1% of men; p < 0.001). However, the analysis of PSM patient groups showed lower mortality rates in women with moderate trauma (NISS 16-24) in the acute phase within three days (1.4% of women vs 2.7% of men, p = 0.03). Analysis of patients with an NISS of 16-24 who died within three days showed a higher NISS in women than in men (19.7 ± 2.3 vs 18.0 ±1.9, respectively, p <0.05). CONCLUSION: There is no gender difference in 30-day or hospital mortality among major trauma patients. However, women admitted for moderate major trauma had higher survival within three days of major trauma.

Polypyrrole/Carbon Nanotube Freestanding Electrode with Excellent Electrochemical Properties for High-Performance All-Solid-State Supercapacitors.

In this study, a facile and environmentally friendly method was used to prepare a freestanding supercapacitor electrode displaying excellent areal capacitance and good cycle life performance. First, we prepared polypyrrole nanoparticles (PPyNP) through a simple in situ chemical polymerization using the plant-derived material curcumin as a bioavailable template. A PPyNP/f-CNT freestanding composite electrode of high mass loading (ca. 14 mg cm-2) was prepared after blending the mixtures of the prepared PPyNP and functionalized CNTs (f-CNTs). The performance of the as-prepared material as a supercapacitor electrode was evaluated in a three-electrode setup using aqueous 1 M H2SO4 as the electrolyte. The PPyNP/f-CNT freestanding composite electrode exhibited a high areal capacitance of 4585 mF cm-2 and a corresponding volumetric capacitance of 176.35 F cm-3 at a current density of 2 mA cm-2. A symmetric all-solid-state supercapacitor assembled using two identical pieces of PPyNP/f-CNT composite electrodes exhibited maximum areal energy and power density of 129.24 µW h cm-2 and 12.5 mW cm-2, respectively. Besides, this supercapacitor device exhibited good cycle life performance, with 79.03% capacitance retention after 10,000 charge/discharge cycles. These results suggest practical applications for these PPyNP/f-CNT freestanding composite electrode-based symmetric all-solid-state supercapacitors.

Conjugated Copolymers through Electrospinning Synthetic Strategies and Their Versatile Applications in Sensing Environmental Toxicants, pH, Temperature, and Humidity.

Conjugated copolymers (CCPs) are a class of polymers with excellent optical luminescent and electrical conducting properties because of their extensive π conjugation. CCPs have several advantages such as facile synthesis, structural tailorability, processability, and ease of device fabrication by compatible solvents. Electrospinning (ES) is a versatile technique that produces continuous high throughput nanofibers or microfibers and its appropriate synchronization with CCPs can aid in harvesting an ideal sensory nanofiber. The ES-based nanofibrous membrane enables sensors to accomplish ultrahigh sensitivity and response time with the aid of a greater surface-to-volume ratio. This review covers the crucial aspects of designing highly responsive optical sensors that includes synthetic strategies, sensor fabrication, mechanistic aspects, sensing modes, and recent sensing trends in monitoring environmental toxicants, pH, temperature, and humidity. In particular, considerable attention is being paid on classifying the ES-based optical sensor fabrication to overcome remaining challenges such as sensitivity, selectivity, dye leaching, instability, and reversibility.

Synthesis of the diketopyrrolopyrrole/terpyridine substituted carbazole derivative based polythiophenes for photovoltaic cells.

A series of conjugated polythiophenes (PTs) having low band gap energies (PDPP, PDPCz21, PDPCz11), with 2-ethylhexyl-functionalized 2,5-thienyl diketopyrrolopyrrole (TDPP) as the electron acceptor and terpyridine-substituted carbazole (TPCz) as the electron donor, have been synthesized and studied for their applicability in polymer-based photovoltaic cells (PVCs). The thermal stability and solvent solubility of PTs increased upon increasing the content of the TPCz derivative. PVCs were fabricated having the following architecture: indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/PT:6,6-phenyl-C71-butyric acid methyl ester (PC71BM)/Ca/Ag. The compatibility between the PT and PC71BM improved upon increasing the TPCz content. The photovoltaic properties of the PDPCz21-based PVCs were superior to those of their PDPP- and PDPCz11-based counterparts.

Interaction of LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ upconversion nanoparticles, molecularly imprinted polymers, and templates.

In this work, LiYF4:Yb0.25 3+/Er0.01 3+/Tm0.01 3+/Ho0.01 3+@LiYF4:Yb0.2 3+ upconverting nanoparticles (UCNP) were used as luminescent materials for the preparation of molecular imprinting polymer nanocomposites. Three luminescent molecularly imprinted polymer (MIP) nanocomposites were prepared by in situ polymerization. The relationship between the functional monomers, templates, and upconversion nanoparticles was investigated. Two hydrophilic monomers (acrylic acid (AA) and acrylamide (AAm)) and one hydrophobic monomer (N-tert-butylacrylamide (TBAm)) were employed as functional monomers, while one amino acid (cysteine) and two proteins (albumin and hemoglobin) were employed as the templates to investigate the effect of their interaction with LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ core/shell UCNPs on the polymerization process, luminescence properties, and adsorption capacity. The results showed that the UCNPs were embedded in the polymeric matrix to form an irregular quasimicrospherical UCNPs@MIP with diameters ranging from several hundred nanometers to several micrometers depending on the functional monomer. The quenching effect was more pronounced for the adsorption of hemoglobin with UCNPs@MIP compared to cysteine and albumin. In addition, the adsorption capacities of the AA- and AAm-made UCNPs@MIP were greater than those of TBAm-made UCNPs@MIP. The rebinding of the templates onto UCNPs@MIP was very fast and approached equilibrium within 30 min, indicating that the synthesized UCNPs@MIP can be employed as fluorescent probes to offer rapid detection of molecules.

Dual Stimuli-Responsive Block Copolymers for Controlled Release Triggered by Upconversion Luminescence or Temperature Variation.

An amphiphilic block copolymer (BCP) which contains both photoresponsive and thermoresponsive blocks was synthesized by the atom transfer radical polymerization approach. Meanwhile, a new core/shell type of the upconversion nanoparticle (UCNP) LiYF4:Yb3+ 0.25,Tm3+ 0.01@LiYF4:Yb3+ 0.2 was successfully synthesized. By encapsulating UCNPs inside the micelles of the BCP and incorporating Nile red (NR) into the UCNP@BCP hybrid nanoparticles as a model drug, controlled release of the drug by the dual-stimuli BCP could be studied. After exposing the UCNP-loaded micellar solution to near-infrared (NIR) light, it was found that the UV light pumped from UCNPs could disrupt the polymer micelles and the fluorescence intensity of NR decreased with the increase of the irradiation time of the NIR light. The thermoresponsive study indicated that the fluorescence intensity of NR decreased with the increase of temperature of the micellar solution because of the release of NR into water arising from the contraction of the amphiphilic BCP.

MAPbI3 Incorporated with Carboxyl Group Chelated Titania for Planar Perovskite Solar Cells in Low-Temperature Process.

Low-temperature, solution-processed, highly efficient hybrid organic/inorganic perovskite planar heterojunction solar cells were fabricated by incorporating reactive crystalline titania (h-TAc) into MAPbI3 layers. The h-TAc was prepared by the sol-gel reaction at low temperature followed by solvothermal treatment. The photoelectrical properties of the solar cells with h-TAc were analyzed. The incorporation with 0.85-wt% h-TAc showed the highest power conversion efficiency (PCE, 15.9%), increasing 69% compared to the pristine cell. The enhancement arose from large-grained microstructures, leading to a low rate of charge recombination. The carboxyl groups chelated on the surface of h-TAc revealed a strong attraction to lead ions, which are significantly helpful to MAPbI3 crystal growth.