Ultraviolet light blocking optically clear adhesives for foldable displays via highly efficient visible-light curing.

In developing an organic light-emitting diode (OLED) panel for a foldable smartphone (specifically, a color filter on encapsulation) aimed at reducing power consumption, the use of a new optically clear adhesive (OCA) that blocks UV light was crucial. However, the incorporation of a UV-blocking agent within the OCA presented a challenge, as it restricted the traditional UV-curing methods commonly used in the manufacturing process. Although a visible-light curing technique for producing UV-blocking OCA was proposed, its slow curing speed posed a barrier to commercialization. Our study introduces a highly efficient photo-initiating system (PIS) for the rapid production of UV-blocking OCAs utilizing visible light. We have carefully selected the photocatalyst (PC) to minimize electron and energy transfer to UV-blocking agents and have chosen co-initiators that allow for faster electron transfer and more rapid PC regeneration compared to previously established amine-based co-initiators. This advancement enabled a tenfold increase in the production speed of UV-blocking OCAs, while maintaining their essential protective, transparent, and flexible properties. When applied to OLED devices, this OCA demonstrated UV protection, suggesting its potential for broader application in the safeguarding of various smart devices.

Combining finite element and reinforcement learning methods to design superconducting coils of saturated iron-core superconducting fault current limiter in the DC power system.

A saturated iron-core type superconducting fault current limiter (SI-SFCL) can effectively restrict the magnitude of the fault current and alleviate the strain on circuit breakers in DC power systems. Design of a superconducting coil (SC), which is one of the key tasks in the SI-SFCL design, requires guaranteeing a sufficient magnetic field, ensuring optimization of the shape and size, minimizing the wire cost, and satisfying the safety and stability of operation. Generally, finite element method (FEM) is used to calculate and evaluate the operating characteristics of SCs, from which it is possible to determine their optimal design parameters. When the coil is complex and large, the simulation time may range from hours to days, and if input parameters change even slightly, the simulations have to be redone from scratch. Recent advances in deep learning represent the ability to be effective for modeling and optimizing complex problems from training data or in real-time. In this paper, we presented a combination of the FEM simulation and deep Q-network (DQN) algorithm to optimize the SC design of a lab-scale SI-SFCL for a DC power system. The detailed design process and options for the SC of SI-SFCL were proposed. In order to analyze the characteristics related to the electromagnetic properties and operational features of the SC, a 3D FEM model was developed. Then, a DQN model was constructed and integrated with the FEM simulation for training and optimizing the design parameters of the SC in real-time. The obtained results of this study have the potential to effectively optimize the design parameters of large-scale SI-SFCL development for high-voltage DC power systems.

Survey on tick distribution and tick-borne pathogens in Daejeon and adjacent areas in South Korea.

Ticks (Ixodidae, also known as hard ticks) as principal vectors of zoonotic diseases such as severe fever with thrombocytopenia syndrome (SFTS), Lyme borreliosis, relapsing fever, anaplasmosis, ehrlichiosis, babesiosis, coxiellosis (Q fever), and tularemia pose a major public health threat. This study was conducted to identify the distribution profile of ticks and tick-borne pathogens in Daejeon and the adjacent areas in South Korea, where no such epidemiological study has been conducted. From April to October 2019, 16,765 ticks were collected from three genera and four species: Haemaphysalis longicornis (n = 14,949; 89.2 %), Haemaphysalis flava (n = 987; 5.9 %), Ixodes nipponensis (n = 828; 5.0 %), and Amblyomma testudinarium (n = 1; 0.01 %). Homogenized samples of ticks were screened by real-time reverse transcription polymerase chain reaction (PCR), real-time PCR, and PCR for the presence of the following tick-borne pathogens: SFTS virus (SFTSV), Borrelia spp., Babesia microti, Coxiella burnetii, Francisella tularensis, Anaplasma phagocytophilum, and Ehrlichia spp. As a result, SFTSV (2 cases), Borrelia spp. (32 cases), and Babesia microti (7 cases) were detected. The findings of this study will contribute to the prevention and management of tick-borne zoonoses.

Biofilm/membrane filtration for reclamation and reuse of rural wastewaters.

To cost-effectively meet water quality and quantity requirements for rural areas, the objective of this research was to evaluate the performances of a three-stage process of anaerobic-oxic-anoxic biofilm filtration (AOBF) and membrane filtration (MF) processes and to assess the potential for reclamation and reuse of blended wastewater contained domestic wastewater, black water, and landfill leachate. The AOBF process at < LV 30 m/day showed good removal results of > 90% for conventional pollutants (> 75% for COD) and > 70% for nutrient. Influent step-feeding with 0.8Q into filter bed 1 and 0.2Q into filter bed 2 achieved denitrification efficiency of 5-10% higher than without step feed. Efficiencies of plate membrane removal were greater than 90% for COD and more than approximate 75% for nutrients and heavy metals, respectively. The AOBF/MF system showed excellent removal results of > 90-95% for soluble nutrients as well as nonsoluble fractions such as TSS, particulate COD. The effluent of AOBF/MF system met the reuse standard for industrial and agricultural water, while effluent of AOBF met the standard for the effluent quality of wastewater treatment plants. These results indicate that the AOBF/MF system was suitable for rural integrated wastewater treatment by achieving cost-effectively an effluent quality able to be used for industrial, agricultural and water bodies recharge purposes.

Cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium.

[reaction: see text] The cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium in DMF produced five- and six-membered cyclic compounds. Although KI was a necessary additive in the cyclization of terminal 1-bromo-2,7-enynes to give the desired products at 25 degrees C, reactions of terminal 1-bromo-2,8-enynes and internal 1-bromo-2,7-enynes with indium proceeded at 100 degrees C in DMF without KI. After cyclizations, subsequent cross-coupling reaction and iodolysis increase the usefulness of this reaction.

Highly efficient Pd-catalyzed carbonylative cross-coupling reactions with tetraorganoindates.

Tetraorganoindates, which were prepared easily from the reaction of 1 equiv of InCl(3) with 4 equiv of organometallics, could be employed as effective nucleophilic cross-coupling partners in Pd-catalyzed carbonylative cross-coupling reactions with a variety of organic electrophiles. The present method gave unsymmetrical ketones and 1,4-diacylbenzenes in good yields with highly efficient transfer of almost all the organic groups attached to the indium under a carbon monoxide atmosphere in THF at 60 degrees C.

Relationship between environmental tobacco smoke and urinary cotinine levels in passive smokers at their residence.

Studies of the health effects of environmental tobacco smoke (ETS) using measured air concentrations are subject to bias. Cotinine, a nicotine metabolite detected in urine, has been recommended as a quantitative measure of nicotine intake and thus as a marker for ETS exposure in humans. The aim of this study was to correlate home indoor ETS levels with passive smokers' urinary cotinine levels. The urinary cotinine concentrations of 57 non-smoking women who spend >19 h a day at home and the nicotine levels in their living room air were measured over a period of 24 h. Nicotine and urinary cotinine levels were analyzed using GC/MS and HPLC/UV, respectively. In addition, information was collected regarding the smoking habits of the subjects' families. A significant correlation was found between the nicotine levels in indoor air and the urinary cotinine to creatinine ratio of the passive smokers. The smoking habits of the subjects' family members were also correlated to the urinary cotinine levels of the passive smokers.