RESUMO
Chiral metal-organic frameworks (CMOFs) and solid-state [2 + 2] photocyclization have been explored as independent areas in crystal engineering. We herein report the photoreactive CMOFs that undergo a [2 + 2] photocycloaddition reaction for the first time. Through the incorporation of a dipyridyl olefin ligand, 1,4-bis[2-(4-pyridyl)ethenyl]benzene, and d-camphoric acid or l-camphoric acid, we constructed a pair of homochiral Zn(II) CMOFs (d-1 or l-1) with a two-dimensional sql topology via a two-step procedure to avoid racemization. Both d-1 and l-1 were photoinert due to the large olefin bond separation. The removal of the solvent molecules between layers enabled them (d-1a and l-1a) to undergo [2 + 2] cycloaddition reactions; d-1a is more reactive (70%) than l-1a (20%) probably due to proper desolvation-induced rearrangement. The photoluminescence properties are also discussed. This work presents a new perspective on photoreactive homochiral network materials with diverse topologies and applications.
RESUMO
The formation of pseudocapsule type homo- and heteromultinuclear complexes of calix[6]-mono-crown-5 (H4L) encapsulating from 4 to 6 alkali metal ions is reported. H4L reacts with KOH to yield a hexanuclear potassium(I) complex [K6(HL)2(CH3OH)2]·CHCl3 (1) in which two bowl-shaped tripotassium(I) complex units are linked in a rim-to-rim fashion via the interligand C-H···π interactions. In the same reaction condition, RbOH afforded a tetranuclear rubidium(I) complex [Rb4(H2L)2(CH3OH)2(µ-H2O)2]·6CHCl3 (2). In 2, again two bowl-shaped dirubidium(I) complex units are held together by two bridging water molecules and C-H···π interactions that act as a glue to generate such an elegant pseudocapsule. Interestingly, a mixture of KOH and RbOH yielded a heterotetranuclear complex [K2Rb2(H2L)2(CH3OH)2(µ-H2O)2]·6CHCl3 (3). Similarly, two heterodinuclear bowl units [KRb(H2L)] in 3 are held together by two bridging water molecules and C-H···π interactions to form a heteromultinuclear pseudocapsule. In each heterodinuclear K+/Rb+ bowl unit of 3, Rb+ occupies the center of the crown loop while K+ locates inside the calix rim. Consequently, the proposed host discriminates not only on the types and numbers of the metal ions but also on their positional preferences in forming pseudocapsules. Solution studies by nuclear magnetic resonance and electrospray ionization-mass support the heterometallic (K+/Rb+) complexation by showing the superior binding affinity of Rb+ over K+ toward the crown loop. These results demonstrate how the metal-driven pseudocapsules are formed and present a new perspective on the metallosupramolecules of the calixcrown scaffold.
RESUMO
In the supramolecule area, the fabrication of a new concept called polyrotaxanes or poly-pseudo-rotaxanes remains challenging. We herein report the formation of a poly-pseudo-rotaxane in which the same salt-type guest serves both linking and threading in the resulting structure. The combination of A1/A2-thiopyridyl pillar[5]arene (L) and silver(I) trifluoroacetate in CHCl3/CH3OH afforded a one-dimensional (1D) poly-pseudo-rotaxane. In this structure, to our surprise, the AgCF3CO2 guest not only links the di-armed L ligands via an infinite -L-Ag-L-Ag- arrangement but also threads into a pillar[5]arene cavity in a dimer form, (AgCF3CO2)2. In contrast, the same reaction in CH2Cl2/CH3OH yielded a simple 1D coordination polymer because an included CH2Cl2 molecule in the pillar[5]arene cavity prevents the threading of the silver(I) trifluoroacetate guest. Comparative 1H- and 19F-NMR studies support the solvent-dependent poly-pseudo-rotaxane formation at a lower concentration of L.
RESUMO
1,4-Bridged calix[6]-mono-crown-4 (H4L) capable of metal binding was employed, and the influence of solvent variations on the formation of alkali metal complexes (1-6) was investigated. In the crystal, the bowl-shaped H4L host contains one water molecule in a good-fit fashion via H-bonds. When the H4L host was reacted with alkali metal hydroxides (M = Na, K, Rb, and Cs) in chloroform/methanol (solvent A), anion-free dinuclear bowl-shaped complexes of type [M2(H2L)] were isolated regardless of the metal ions. In the dinuclear bowl complexes 1-4, two metal ions (M1 and M2) show different binding behaviors: one (M1) locates inside the pocket like an "egg-in-nest", and the other (M2) positions above the M1 interacting with the calix rim. When chloroform/acetonitrile (solvent B) was used in potassium(I) complexation, interestingly, an elegant pseudo-capsule-type quadrunuclear complex 5 was isolated. In 5, two dipotassium(I) bowls in a rim-to-rim arrangement are triply bridged by one water and two acetonitrile molecules like a magic glue. However, in dichloromethane/methanol (solvent C), cesium(I) yielded an infinite product 6 in which dicesium(I) bowls are linked by cation-π interactions, giving rise to a one-dimensional zigzag coordination polymer. Taken collectively, all products share a dinuclear bowl unit, some of which are further extended to the pseudo-capsule or polymeric array, depending on the solvents. The results suggest the solvent variation as a versatile engineering tool and present a perspective on the metallosupramolecules of calix[6]-mono-crowns with monomer, dimer (e.g., pseudo-capsule), and polymer topologies.
RESUMO
Circularly polarized luminescence (CPL) with tunable chirality is currently a challenging issue in the development of supramolecular nanomaterials. We herein report the formation of helical nanoribbons which grow into helical tubes through dynamic helicity inversion. For this, chiral PtII complexes of terpyridine derivatives, namely S-trans-1 and R-trans-1, with respective S- and R-alanine subunits and incorporating trans-double bonds in the alkyl chain were prepared. In DMSO/H2 O (5 : 1 v/v), S-trans-1 initially forms a fibrous self-assembled product, which then undergoes dynamic transformation into helical tubes (left-handed or M-type) through helical ribbons (right-handed or P-type). Interestingly, both helical supramolecular architectures are capable of emitting CPL signals. The metastable helical ribbons show CPL signals (glum =±4.7×10-2 ) at 570â nm. Meanwhile, the nanotubes, which are the thermodynamic products, show intense CPL signals (glum =±5.6×10-2 ) at 610â nm accompanied by helicity inversion. This study provides an efficient way to develop highly dissymmetric CPL nanomaterials by regulating the morphology of metallosupramolecular architectures.
RESUMO
The study of chiral self-sorting is extremely important for understanding biological systems and for developing applications for the biomedical field. In this study, we attempted unprecedented chiral self-sorting supramolecular polymerization accompanying helical inversion with Ag+ in one enantiomeric component. Bola-type terpyridine-based ligands (R-L1 and S-L1) comprising R- or S-alanine analogs were synthesized. First, R-L1 dissolved in DMSO/H2O (1 : 1, v/v) forms right-handed helical fibers (aggregate I) via supramolecular polymerization. However, after the addition of AgNO3 (0.2-1.1 equiv.) to the R-L1 ligand, in particular, it was found that aggregate II with left-handed helicity is generated from the [R-L1(AgNO3)2] complex through the [R-L1Ag]+ complex via the dissociation of aggregate I by a multistep with an off pathway, thus demonstrating interesting self-sorting properties driven by helicity and shape discrimination. In addition, the [R-L1(AgNO3)2] complex, which acted as a building block to generate aggregate III with a spherical structure, existed as a metastable product during the formation of aggregate II in the presence of 1.2-1.5 equiv. of AgNO3. Furthermore, the AFM and CD results of two samples prepared using aggregates I and III with different volume ratios were similar to those obtained upon the addition of AgNO3 to free R-L1. These findings suggest that homochiral self-sorting in a mixture system occurred by the generation of aggregate II composed of the [R-L1Ag]+ complex via the rearrangement of both, aggregates I and III. This is a unique example of helicity- and shape-driven chiral self-sorting supramolecular polymerization induced by Ag+ starting from one enantiomeric component. This research will improve understanding of homochirality in complex biological models and contribute to the development of new chiral materials and catalysts for asymmetric synthesis.
RESUMO
The formation of a cyclic dimer complex (1) and a poly-pseudo-rotaxane (2) of a racemic A1/A2-thiopyridyl pillar[5]arene (rac-L) with different chirality is reported. A one-pot reaction of rac-L with HgCl2 afforded a heterochiral cyclic dimer complex, [Hg2(pR-L)(pS-L)Cl4]·8CH2Cl2 (1), in which two Hg2+ atoms and one (pR-L)/(pS-L) enantiomeric pair form a [2:2] metallacycle via a metal coordination-based cyclization. Interestingly, the same reaction in the presence of the linear dinitrile guest, CN(CH2)8CN (G), yielded a one-dimensional poly-pseudo-rotaxane, {[Hg(G@pR-L)Cl2][Hg(G@pS-L)Cl2]}n (2), probably due to the rigidified ligand structure resulting from the dinitrile guest (G) threading. In 2, pR-L and pS-L generate two separated homochiral poly-pseudo-rotaxanes in a crystal. Both products are new members of the pillararene-derivative family. This study improves our understanding of self-assembly in nature and leads to this approach being an engineering tool for the construction of mechanically interlocked supramolecules.
RESUMO
We report the formation of heavy alkali metal complexes of bicyclic host molecules including the caesium(I) complex that catches the central metal ion with the deep pocket of the host similar to a baseball glove. For this, three regioisomers of singly bridged calix[6]crown-6 [1,2-bridged (H4 L 1,2), 1,3-bridged (H4 L 1,3) and 1,4-bridged (H4 L 1,4)] have been synthesized by alkyl-ation of calix[6]arene with penta-ethyl-ene glycol di-tosyl-ate in the presence of M 2CO3 (M = Na, K, Rb and Cs). The larger the cation size of the metal carbonate, the higher the yield of the H4 L 1,4 isomer, indicating the size-based template effect. A combination of H4 L 1,2 and RbOH allowed isolation of the mononuclear rubidium(I) complex (1) in which the metal center is six-coordinated in a loose fashion, the remaining two oxygen donors in the crown loop and two phenols in the calix rim are uncoordinated. Notably, the complexation of H4 L 1,2 with CsOH yielded the mononuclear caesium(I) complex (2), in which all possible ten binding sites on the deep and good-fit pocket participate in coordination via high cooperativity between the crown loop and calix rim, similar to a baseball glove. In dipolar organic solution, the caesium(I) complex 2 remains intact. H4 L 1,4 afforded a dicesium(I) complex (3) and adjacent complexes are linked by intermolecular cation-π interactions, giving rise to a pseudo one-dimensional coordination polymer. These results provide insight into the metal carbonate-dependent synthesis of calix[6]crowns and the influence of regioisomers on caesium(I) complexation.
RESUMO
In the construction of metallosupramolecules, the reaction sequence in a three-reactant system (one ligand plus two metal ions) could be one of the controlling factors influencing the outcome of the reaction. In this work, the formation of supramolecular isomers (1 and 2) and an endo/exocyclic Cu+ complex (4) of the NS4-macrocycle (L) via different sequential metal addition protocols (routes I-III) is reported. In one-pot reactions of L with Cu(CH3CN)4PF6 in the absence (route I) and presence (route II) of CdI2, a cyclic dimer CuI complex, [Cu2(L)2](PF6)2 (1), and a one-dimensional coordination polymer, [Cu2(L)2]n·n[CdI4] (2), were obtained, respectively. Interestingly, the complex cations in 1 and 2 are supramolecular isomers formed via cyclization and polymerization upon complexation, respectively, probably due to different geometric and electronic complementarities, via the C-H···X- hydrogen bonds, between L and the counterion. In the two-step reaction (route III), an endocyclic Cd2+ complex, [Cd(L)I2] (3), obtained in the first step was utilized in the following reaction with Cu(CH3CN)4PF6, giving rise to an endo/exocyclic tetranuclear Cu+ complex, [Cu4(L)2(CH3CN)6](PF6)4 (4), via Cd2+ â 2Cu+ substitution, which is not accessible by conventional procedures. Solution studies by comparative NMR and electrospray ionization mass spectroscopy also support metal substitution by showing the stronger binding affinity of Cu+ over Cd2+. These results demonstrate that the metal substitution protocol could be useful for reaching novel metallosupramolecules difficult to obtain by other methods.
RESUMO
Following the pioneering work of Sauvage and Stoddart on rotaxanes, construction of higher dimensional polyrotaxanes in metal-organic frameworks (MOFs) via a modified protocol is challenging. We present the formation of a two-dimensional (2D) polyrotaxane and its conversion to a three-dimensional (3D) polyrotaxane MOF via a photoreaction between interdigitated "olefin wheels". For this purpose, a 2-fold entangled 2D MOF [Pb2(bpp)(sdc)2] (1), showing a 2D + 2D â 2D polyrotaxane motif, has been synthesized from the solvothermal reaction of lead(II) nitrate, 3,3'-stilbenedicarboxylic acid (H2sdc) containing an olefin group, and 1,4-bis(4-pyridyl)piperazine (bpp). The single-crystal X-ray diffraction analysis of 1 revealed that the adjacent entangled 2D layers are interdigitated, with the separation of 3.72 Å between CâC bond pairs in adjacent layers satisfying Schmidt's criteria for the occurrence of a [2 + 2] photocycloaddition reaction. Irradiation of the single crystals of 1 under UV light resulted in formation of a 3D polyrotaxane, [Pb2(bpp)(rctt-tccb)]n (2), due to a [2 + 2] photocycloaddition reaction between two wheels via a single-crystal to single-crystal transformation. The photocycloaddition and partial thermal cleavage reaction between 1 and 2 were confirmed by 1H NMR and powder X-ray diffraction (PXRD) in solution and the solid state, respectively. The present approach could contribute to the understanding of the construction of higher dimensional polyrotaxanes which are not accessible by the traditional routes.
RESUMO
A pillar[5]-bis-trithiacrown (L) capable of metal binding and organic guest threading simultaneously has been employed, and the influence of dinitrile guests [CN(CH2)nCN (n = 2-6: abbreviated C2-C6)] on the coordination behaviors has been investigated. When the ditopic ligand L was reacted with HgCl2 in the presence of the C2-C6 guests, the shorter guests C2 and C3 afforded a two-dimensional coordination polymer [Hg7Cl14(C2@L)2]n (1) and a one-dimensional coordination polymer [(Hg3Cl6)2(C3@L)2]n (2), respectively. In 1 and 2, each dinitrile guest threads into the pillararene cavity to form a C2@L or C3@L unit via the host-guest interaction. Further linking of these units by exocyclic Hg-S bonds and anion coordination lead to the formation of coordination products with different dimensionalities. While the use of the longer guests C4-C6 under the same reactions yielded a discrete dimercury(II) complex 3, [Hg2Cl4(CH3CN@L)] which contains one acetonitrile solvent molecule because the longer dinitriles do not serve as effective guests. In the NMR and UV-vis studies, the association constants (log K1:1) for the host-guest interactions of L with the dinitrile guests are C2 (4.75) > C3 (4.17) â« C4 (2.85) > C5 (2.45) > C6 (too small), indicating that the shorter guests C2 or C3 interact more strongly than longer ones due to the confined interior space of L. Taken collectively, the C2 and C3 guests with proper size-matching promote the formation of coordination polymers and vice versa, suggesting that the guest size could be a controlling factor.
RESUMO
We report a unique dynamic morphology transformation of a Ag+-coordinated supramolecular nanostructure accompanying the conversion of complex structures in aqueous solution. In the presence of AgNO3 (1.0 equiv), the achiral bipyridine-based ligand 1G, possessing hydrazine and glycine moieties, preferentially generated a 1D needle-like structure (nanostructure I) based on the 1GAgNO3 complex (1G:Ag+ = 1:1) as a metastable product. Nanostructure I was then transformed into nanostructure II, which was composed of the 1G3Ag2(NO3)2 complex (1G:Ag+ = 3:2) as the thermodynamically stable product. This nanostructure exhibited a 1D helical tubular structure with a uniform diameter via a 2D ribbon as an intermediator, which led to the generation of a circular dichroism (CD) signal with right-handed (P-type) helicity. The observed dynamic transformation was attributed to formation of the thermodynamically favored helical 1G3Ag2(NO3)2 complex. In addition, the helical 1G3Ag2(NO3)2 complex acted as an initiator in the transformation from the 1D needle-like structure to the 1D helical tube via a 2D ribbon. The enhanced ΔG° value of nanostructure II compared to that of nanostructure I confirmed that nanostructure II is thermodynamically stable. More importantly, the transformation of supramolecular nanostructure I to nanostructure II occurred via an "on" pathway, even though the 1GAgNO3 complex was converted to the 1G3Ag2(NO3)2 complex, which did not involve dissociation from nanostructure I into the monomeric 1GAgNO3 complex species. In the kinetic study, the NO3- anion was found to act as an accelerator for the dynamic transformation from nanostructure I to nanostructure II. This result provides the first example of a dynamic transformation of a 1D needle-like structure into a 1D tubular structure via a 2D ribbon structure, accompanied by the conversion of a complex structure and the generation of a large CD signal for the metallo-supramolecular nanostructure. This study may open up new avenues to the understanding of a dynamic morphology transformation process in biological systems.
RESUMO
Preferential formation of cis- or trans-palladium(II) complexes controlled via the exocyclic binding sites embedded in dithiamacrocycles (L1 = -S(CH2)2S-; L2 = -S(CH2)2O(CH2)2S-) is reported. From the reaction with K2PdCl4, the shorter sulfur-to-sulfur separation in L1 preferentially leads to the formation of cis-[Pd(L1)Cl2] (1), while L2, incorporating a larger sulfur-to-sulfur separation, coordinates in a trans fashion to form a cyclic dimer, trans-[Pd2(L2)2Cl4] (2). The observed results illustrate the possibility for the controlled formation of cis/trans square-planar complexes through binding-site design. When palladium(II) acetate was substituted for K2PdCl4 in the above reaction, L1 gave no product, while L2 resulted in the formation of a unique tripalladium(II) complex, [Pd3(L2)(CH3C(âN)OC(âN)CH3)(CH3COO)4] (3), in which three PdII atoms are linked by acetimidic anhydride, CH3C(âN)OC(âN)CH3, derived from the acetonitrile solvent employed. In the 1H NMR spectrum for 3, specific methylene signals for methylene protons adjacent to S donors exhibit large complexation-induced splitting of the geminal proton signals into axial and equatorial proton peaks, thus indicating magnetically nonequivalent geminal protons that reflect the restricted conformation of the metallabicycle.
RESUMO
Correction for 'Metallosupramolecules of pillar[5]-bis-trithiacrown including a mercury(ii) iodide ion-triplet complex' by Mingyeong Shin et al., Chem. Commun., 2020, DOI: 10.1039/d0cc03902k.
RESUMO
We demonstrated the exciplex emission of supramolecular polymers (Bipy-1) possessing bipyridine and pyrene moieties. The distinctive exciplex emission of the supramolecular polymers was controlled by tuning the molecular conformation in different composition ratios of a mixed DMSO/H2O solution. The strong exciplex emission of the supramolecular polymer I with yellow emission was a consequence of the intramolecular charge-transfer interactions in a mixed DMSO/H2O (60 : 40-1 : 99 v/v) solution.
RESUMO
A combination of pillar[5]-bis-trithiacrown (L) and mercury(ii) halides afforded a monomer complex (Cl--form), a 1-D coordination polymer (Br--form) and a supramolecular ion-triplet complex [(I·Hg·I)@L] (I--form). In the ion-triplet complex, the host encapsulates the (I--Hg2+-I-) entity via Hg2+π and C-HI- interactions, reflecting geometrical complementarity.
RESUMO
Metal-coordination polymeric gels are interesting areas as organic/inorganic hybrid supramolecular materials. The bispicolylamine (BPA) based gelator (1) showed excellent gelation with typical fibrillar morphology in acetonitrile. Upon complexing 1 with Zn2+, complexes ([1 + Zn + ACN]2+ and [1 + zinc trifluoromethanesulfonate (ZnOTf)]+) with four coordination numbers were formed, which determine the gel structure significantly. A gel-sol transition was induced, driven by the ratio of the two metal complexes produced. Through nuclear magnetic resonance analysis, the driving forces in the gel formation (i.e., hydrogen-bonding and π-π stacking) were observed in detail. In the absence and the presence of Zn2+, the intermolecular hydrogen-bonds and π-π stacking were the primary driving forces in the gel formation, respectively. In addition, the supramolecular gels exhibited a monolayer lamellar structure irrespective of Zn2+. Conclusively, the gels' elasticity and viscosity reduced in the presence of Zn2+.
Assuntos
Aminas/química , Géis/química , Ácidos Picolínicos/química , Zinco/química , Complexos de Coordenação , Ligação de Hidrogênio , Espectroscopia de Ressonância Magnética , Metais , Estrutura Molecular , Fenômenos Físicos , Polímeros/químicaRESUMO
Among different types of polymorphism, disappearing polymorphism deals with the metastable kinetic form which can not be reproduced after its first isolation. In the world of coordination polymers (CPs) and metal-organic frameworks (MOFs), despite the fact that many types of supramolecular isomerism exist, we are unaware of disappearing supramolecular isomerism akin to disappearing polymorphism. This work reports a MOF with dia topology that could not be reproduced, but subsequent synthesis yielded another supramolecular isomer, a double-pillared-layer MOF. When perylene was added in the same reaction, the disappeared dia MOF reappeared with perylene as a guest in the channels. Interestingly, the photoluminescence of the dia MOF with a perylene guest is dominated by the emission of the guest molecule. The influence of guest molecules on the stabilization of the supramolecular isomers of a MOF opens up a strategy to access MOFs with different structures.
RESUMO
A combination of O3S2-macrocycles incorporating different sulfur-to-sulfur separations (S-(CH2)n-S, L1: n = 2, L2: n = 3) and copper(ii) nitrate afforded new types of both monocopper(ii) and dicopper(ii) complexes, respectively. L1 gave a 1D coordination polymer [Cu2(L1)2(NO3)4]n (1) based on a convergent exo-coordination mode while L2 resulted in the formation of a divergent exo/exo-coordinated dicopper(ii) complex, [Cu2(L2ox)4(µ-Cl)](NO3)4 (2), whose shape resembles a four-bladed waterwheel in which in situ oxidized macrocycles (L2ox) act as the blades and a CuII-(µ-Cl)-CuII entity corresponds to the axle shaft. The chloro-bridging ligand is derived from the dichloromethane solvent and its arrangement is held together by C-HCl- H-bonds. Compound 2 shows a weak antiferromagnetic property via the CuII-(µ-Cl)-CuII entity.
RESUMO
To obtain a mechanistic understanding of the effects derived from fluorophores, solvents and anions on heavy metal sensing, two NOS2-macrocycle-based fluorosensors with different fluorophores (L1: 9-methylanthracene, L2: benzothiazolyl) were synthesised. In this regard, particular attention was given to monitoring the cation-ligand, cation-anion and cation-solvent interactions from the detailed complexation processes in both the solution and solid states while considering the structure-function relationship. L1 showed turn-on type silver(i) selectivity over other metal ions, including mercury(ii), in ethanol. According to the complexation results obtained by titration (UV-vis, fluorescence and NMR), cold-spray ionization mass spectrometry and X-ray crystallography, the observed silver(i) sensing by L1 is mainly due to its 1 : 1 complexation with silver(i) via the Ag-Ntert bond and the strong solvation of mercury(ii). Thus, the turn-on sensing for silver(i) can be explained by the CHEF effect, in which the coordination of silver(i) to the receptor unit effectively prevents PET quenching. As a dual-probe (UV-vis and fluorescence) chemosensor, L2 showed fluorescence turn-off type selectivity for both silver(i) and mercury(ii) in ethanol. In acetonitrile, L2 showed improved fluorescence turn-off type selectivity for mercury(ii) with ClO4- and NO3-; however, no such responses were observed with other anions, such as Cl-, Br-, I-, SCN-, OAc- and SO42-. Together with the complexation results by titration, the crystal structures of an endocyclic mercury(ii) perchlorate complex and an exocyclic mercury(ii) iodide complex revealed that the anion-controlled mercury(ii) sensing by L2 arises from the endo- and exo-coordination modes depending on the anion coordinating ability, which induces either metal-receptor/fluorophore binding (Hg-Ntert and Hg-Nfl) or no binding. Taken collectively, the photophysical, thermodynamic and structural results of the complexations herein suggest that the sensing properties of heavy metal ions by macrocycle-based fluorosensors are very sensitive not only to the cation-receptor and cation-fluorophore interactions but also to the cation-anion (endo/exo-coordination modes) and/or cation-solvent interactions.