RESUMO
Copper pollution has attracted global environmental concern. Widespread Cu pollution results in excessive Cu accumulation in human. Epidemiological studies and animal experiments revealed that Cu exposure might have reproductive toxicity. Cuproptosis is a recently reported Cu-dependent and programmed cell death pattern. However, the mechanism by which copper exposure might cause cell cuproptosis is largely unknown. We chose trophoblast cells as cell model and found that copper exposure causes trophoblast cell cuproptosis. In mechanism, copper exposure up-regulates lnc-HZ11 expression levels, which increases intracellular Cu2+ levels and causes trophoblast cell cuproptosis. Knockdown of lnc-HZ11 efficiently reduces intracellular Cu2+ levels and alleviate trophoblast cell cuproptosis, which could be further alleviated by co-treatment with DC or TEPA. These results discover novel toxicological effects of copper exposure and also provide potential target for protection trophoblast cells from cuproptosis in the presence of excessive copper exposure.
Assuntos
Cobre , Trofoblastos , Regulação para Cima , Trofoblastos/efeitos dos fármacos , Cobre/toxicidade , Humanos , Regulação para Cima/efeitos dos fármacos , Linhagem Celular , Poluentes Ambientais/toxicidade , RNA Longo não Codificante/genéticaRESUMO
Phytoene desaturase (PDS) is a critical functional enzyme in blocking ζ-carotene biosynthesis and is one of the bleaching herbicide targets. At present, norflurazon (NRF) is the only commercial pyridazine herbicide targeting PDS. Therefore, developing new and diverse pyridazine herbicides targeting PDS is urgently required. In this study, diflufenican (BF) was used as the lead compound, and a scaffold-hopping strategy was employed to design and synthesize some pyridazine derivatives based on the action mode of BF and PDS. The preemergence herbicidal activity tests revealed that compound 6-chloro-N-(2,4-difluorophenyl)-3-(3-(trifluoromethyl)phenoxy)pyridazine-4-carboxamide (B1) with 2,4-diF substitution in the benzeneamino ring showed 100% inhibition rates against the roots and stems of Echinochloa crus-galli and Portulaca oleracea at 100 µg/mL, superior to the inhibition rates of BF. Meanwhile, compound B1 demonstrated excellent postemergence herbicidal activity against broadleaf weeds, which was similar to that of BF (inhibition rate of 100%) but superior to that of NRF. This indicated that 6-Cl in the pyridazine ring is the key group for postemergence herbicidal activity. In addition, compound B1 could induce downregulation of PDS gene expression, 15-cis-phytoene accumulation, and Y(II) deficiency and prevent photosynthesis. Therefore, B1 can be considered as a promising candidate for developing high-efficiency PDS inhibitors.
Assuntos
Echinochloa , Herbicidas , Oxirredutases , Proteínas de Plantas , Plantas Daninhas , Piridazinas , Herbicidas/farmacologia , Herbicidas/química , Piridazinas/farmacologia , Piridazinas/química , Echinochloa/efeitos dos fármacos , Echinochloa/enzimologia , Echinochloa/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Proteínas de Plantas/química , Proteínas de Plantas/antagonistas & inibidores , Oxirredutases/genética , Oxirredutases/metabolismo , Oxirredutases/antagonistas & inibidores , Oxirredutases/química , Plantas Daninhas/efeitos dos fármacos , Plantas Daninhas/enzimologia , Plantas Daninhas/genética , Relação Estrutura-Atividade , Inibidores Enzimáticos/farmacologia , Inibidores Enzimáticos/química , Raízes de Plantas/química , Raízes de Plantas/efeitos dos fármacos , Estrutura MolecularRESUMO
PURPOSE: This study aimed to evaluate and optimize intraocular lens (IOL) power selection for cataract patients with high axial myopia receiving trifocal IOLs. DESIGN: A multi-center, retrospective observational case series was conducted. Patients having an axial length ≥26 mm and undergoing cataract surgery with trifocal IOL implanted were studied. METHODS: Preoperative biometric and postoperative outcome data from 139 eyes were collected to train and test various machine learning (ML) models (support vector machine, linear regression, and stacking regressor) using five-fold cross-validation. The models' performance was further validated externally using data from 48 eyes enrolled from other hospitals. Performance of seven IOL calculation formulas (BUII, Kane, EVO, K6, DGS, Holladay I, and SRK/T) were examined with and without ML models. RESULTS: The results of cross-validation revealed improvements across all IOL calculation formulas, especially for K6 and Holladay I. The model increased the percentage of eyes with a prediction error (PE) within ±0.50 D from 71.94% to 79.14% for K6, and from 35.25% to 51.80% for Holladay I. In external validation involving 48 patients from other centers, six out of seven formulas demonstrated a reduction in the mean absolute error (MAE). K6's PE within ±0.50 D improved from 62.50% to 77.08%, and Holladay I from 16.67% to 58.33%. CONCLUSIONS: In this study, we conducted a comprehensive evaluation of seven IOL power calculation formulas in high axial myopia cases and explored the effectiveness of the Stacking Regressor model in augmenting their accuracy. Of these formulas, K6 and Holladay I exhibited the most significant improvements, suggesting that integrating ML may have varying levels of effectiveness across different formulas but holds substantial promise in improving the predictability of IOL power calculations in patients with long eyes.
Assuntos
Catarata , Lentes Intraoculares , Miopia , Humanos , Miopia/cirurgia , Óptica e Fotônica , Refração Ocular , Estudos RetrospectivosRESUMO
With the progress in refractive cataract surgery, more intraocular lens (IOL) power formulas have been introduced with the aim of reducing the postoperative refractive error. The postoperative IOL position is critical to IOL power calculations. Therefore, the improvements in postoperative IOL position prediction will enable better selection of IOL power and postoperative refraction. In the past, the postoperative IOL position was mainly predicted by preoperative anterior segment parameters such as preoperative axial length (AL), anterior chamber depth (ACD), and corneal curvature. In recent years, some novel methods including the intraoperative ACD, crystalline lens geometry, and artificial intelligence (AI) of prediction of postoperative IOL position have been reported. This article attempts to give a review about the research progress on prediction of the postoperative IOL position.
Assuntos
Cristalino , Lentes Intraoculares , Facoemulsificação , Erros de Refração , Humanos , Inteligência Artificial , Refração Ocular , Cristalino/cirurgia , BiometriaRESUMO
Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.
RESUMO
ABCG1 is an essential protein involved in the efflux of intracellular cholesterol to the extracellular space, thus playing a critical role in reducing cholesterol accumulation in neighboring tissues. Bibliometric analysis pertains to the interdisciplinary field of quantitative examination of diverse documents using mathematical and statistical techniques. It integrates the investigation of structural and temporal patterns in academic publications with an exploration of subject focus and forms of uncertainty. This research paper examines the historical evolution, current areas of interest, and future development trends of ABCG1 through bibliometric analysis. This study aims to offer readers insights into the research status and emerging trends of ABCG1, thereby assisting researchers in the exciting field to explore novel research avenues. Following rigorous selection, research on ABCG1 has remained highly active over the past two decades. ABCG1 has even started to emerge in previously unrelated fields, such as the field of cancer research. According to the analysis conducted by Citespace, a lot of keywords and influential citations were identified. ABCG1 has been found to establish a connection between cancer and cardiovascular disease, highlighting their interrelationship. This review aims to assist readers who have limited familiarity with ABCG1 research in gaining a rapid understanding of its developmental trajectory. Additionally, it aims to offer researchers potential areas of focus for future studies related to ABCG1.
Assuntos
Membro 1 da Subfamília G de Transportadores de Cassetes de Ligação de ATP , Colesterol , Humanos , Colesterol/metabolismoRESUMO
Metal-organic frameworks (MOFs) possess well-defined, designable structures, holding great potential in enhancing product selectivity for electrochemical CO2 reduction (CO2R) through active site engineering. Here, we report a novel MOF catalyst featuring pyrazolate-stabilized asymmetric Ni/Cu sites, which not only maintains structural stability under harsh electrochemical conditions but also exhibits extraordinarily high ethylene (C2H4) selectivity during CO2R. At a cathode potential of -1.3 V versus RHE, our MOF catalyst, denoted as Cu1Ni-BDP, manifests a C2H4 Faradaic efficiency (FE) of 52.7% with an overall current density of 0.53 A cm-2 in 1.0 M KOH electrolyte, surpassing that on prevailing Cu-based catalysts. More remarkably, the Cu1Ni-BDP MOF exhibits a stable performance with only 4.5% reduction in C2H4 FE during 25 h of CO2 electrolysis. A suite of characterization toolsâsuch as high-resolution transmission electron microscopy, X-ray absorption spectroscopy, operando X-ray diffraction, and infrared spectroscopyâand density functional theory calculations collectively reveal that the cubic pyrazolate-metal coordination structure and the asymmetric Ni-Cu sites in the MOF catalyst synergistically facilitate the stable formation of C2H4 from CO2.
RESUMO
To investigate the clinical pathways via which the glaucomatous optic nerve damage (GOND) occurred in cases with glaucomatocyclitic crisis (also called Posner-Schlossman syndrome, PSS). A retrospective study was conducted, 59 PSS patients with confirmed GOND were screened out from 190 PSS cases and followed up for a period of 5â ±â 3.3 years. Clinical data were retrospectively analyzed systematically and dynamically, including intraocular pressure and its dynamic change, appearance of fundus, visual field and the state of anterior chamber angle in initial and later period during the episodes and intermission of PSS. Based on the clinical data, a classification and standard for the clinical pathways of GOND were established, and the clinical pathway of GOND in each patient was classified accordingly. There are at least 4 clinical pathways of GOND in PSS patients, namely: Type A: GOND was simply caused by the accumulation effect of high IOP during many attacks of PSS itself. Type B: GOND was resulted from the combined action of PSS itself and another type of secondary open-angle glaucoma. The recurrent inflammation during the episodes of PSS damaged the trabecular meshwork, which can cause elevation of IOP during the intermission of PSS. Type C: PSS combined with primary open angle glaucoma (POAG). Type D: PSS combined with primary angle-closure glaucoma (PACG). Base on the clinical gateways of GOND classification above, the cases of type A, B, C, and D were 27, 6, 19, and 7 respectively. The staging of visual field damage in cases with GOND from different clinical pathways showed a significant difference (Person chi-square χ2 test, χ2 = 7.211, Pâ =â .007). There are at least 4 clinical pathways of GOND in PSS patients, and each clinical pathway corresponds to different clinical features and different treatment principles. It is extremely important to correctly discriminate the pathways of GOND in PSS patients.
Assuntos
Glaucoma de Ângulo Aberto , Glaucoma , Traumatismos do Nervo Óptico , Humanos , Glaucoma de Ângulo Aberto/diagnóstico , Estudos Retrospectivos , Procedimentos Clínicos , Nervo ÓpticoRESUMO
Developing a green and energy-saving alternative to the traditional Haber-Bosch process for converting nitrogen into ammonia is urgently needed. Imitating from biological nitrogen fixation and photosynthesis processes, this work develops a monolithic artificial leaf based on triple junction (3J) InGaP/GaAs/Ge cell for solar-driven ammonia conversion under ambient conditions. A gold layer serves as the catalytic site for nitrogen fixation with photogenerated electrons. The Au/Ti/3J InGaP/GaAs/Ge photoelectrochemical (PEC) device achieves high ammonia production rates and Faradaic efficiencies in a two-electrode system without applying external potential. For example, at 0.2 sunlight intensity, the solar-to-ammonia (STA) conversion efficiency reaches 1.11% and the corresponding Faradaic efficiency is up to 28.9%. By integrating a Ni foil on the anode side for the oxygen evolution reaction (OER), the monolithic artificial leaf exhibits an ammonia production rate of 8.5 µg cm-2 h at 1.5 sunlight intensity. Additionally, a 3 × 3 cm unassisted wireless PEC device is fabricated that produces 1.0039 mg of ammonia in the 36-h durability test. Thus, the new artificial leaf can successfully and directly convert solar energy into chemical energy and generate useful products in an environmentally friendly approach.
RESUMO
Background Limited data are available for postpartum hypertension prediction after preeclampsia. Methods and Results We examined the association between maternal serum chemerin levels in patients with preeclampsia and blood pressure (BP) levels after delivery in a prospective birth cohort of 15 041 singleton pregnant women. A total of 310 cases among 322 patients with preeclampsia (follow-up rate, 96.3%) were followed up during a mean 2.8 years after delivery. Compared with matched uncomplicated controls (n=310), serum chemerin measured at ≈35 gestational weeks was significantly increased in preeclampsia (171.8±49.2 versus 140.2±53.5 ng/mL; P<0.01) and positively correlated with the occurrence of postpartum hypertension, defined as either BP ≥130/80 mm Hg (per 1-SD increase: odds ratio [OR], 4.01 [95% CI, 2.77-5.81]) or as BP ≥140/90 mm Hg (per 1-SD increase: OR, 1.70 [95% CI, 1.28-2.25]) in patients with preeclampsia. The addition of chemerin levels improved the predictive performance of the clinical variable-derived prediction models for postpartum hypertension (for BP ≥130/80 mm Hg: area under the curve, 0.903 [95% CI, 0.869-0.937], Δ area under the curve, 0.070, P<0.001; for BP ≥140/90 mm Hg: area under the curve, 0.852 [95% CI, 0.803-0.902], Δ area under the curve, 0.030, P=0.002). The decision curve analysis revealed a net benefit of the chemerin-based prediction model for postpartum BP ≥130/80 mm Hg. Conclusions This study provides the first evidence supporting the independent predictive role of third-trimester maternal chemerin levels for postpartum hypertension after preeclampsia. Future study is warranted for external validation of this finding.
Assuntos
Hipertensão , Pré-Eclâmpsia , Gravidez , Humanos , Feminino , Pré-Eclâmpsia/epidemiologia , Terceiro Trimestre da Gravidez , Estudos Prospectivos , Hipertensão/epidemiologia , Pressão SanguíneaRESUMO
Copper (Cu)-based catalysts generally exhibit high C2+ selectivity during the electrochemical CO2 reduction reaction (CO2RR). However, the origin of this selectivity and the influence of catalyst precursors on it are not fully understood. We combine operando X-ray diffraction and operando Raman spectroscopy to monitor the structural and compositional evolution of three Cu precursors during the CO2RR. The results indicate that despite different kinetics, all three precursors are completely reduced to Cu(0) with similar grain sizes (~11 nm), and that oxidized Cu species are not involved in the CO2RR. Furthermore, Cu(OH)2- and Cu2(OH)2CO3-derived Cu exhibit considerable tensile strain (0.43%~0.55%), whereas CuO-derived Cu does not. Theoretical calculations suggest that the tensile strain in Cu lattice is conducive to promoting CO2RR, which is consistent with experimental observations. The high CO2RR performance of some derived Cu catalysts is attributed to the combined effect of the small grain size and lattice strain, both originating from the in situ electroreduction of precursors. These findings establish correlations between Cu precursors, lattice strains, and catalytic behaviors, demonstrating the unique ability of operando characterization in studying electrochemical processes.
RESUMO
Radioactive molecular iodine (I2) and organic iodides, mainly methyl iodide (CH3I), coexist in the off-gas stream of nuclear power plants at low concentrations, whereas few adsorbents can effectively adsorb low-concentration I2 and CH3I simultaneously. Here we demonstrate that the I2 adsorption can occur on various adsorptive sites and be promoted through intermolecular interactions. The CH3I adsorption capacity is positively correlated with the content of strong binding sites but is unrelated to the textural properties of the adsorbent. These insights allow us to design a covalent organic framework to simultaneously capture I2 and CH3I at low concentrations. The developed material, COF-TAPT, combines high crystallinity, a large surface area, and abundant nucleophilic groups and exhibits a record-high static CH3I adsorption capacity (1.53 g·g-1 at 25 °C). In the dynamic mixed-gas adsorption with 150 ppm of I2 and 50 ppm of CH3I, COF-TAPT presents an excellent total iodine capture capacity (1.51 g·g-1), surpassing various benchmark adsorbents. This work deepens the understanding of I2/CH3I adsorption mechanisms, providing guidance for the development of novel adsorbents for related applications.
RESUMO
The capture of radioactive I2 vapor from nuclear waste under industrial operating conditions remains a challenging task, as the practical industrial conditions of high temperature (≥150 °C) and low I2 concentration (â¼150 ppmv) are unfavorable for I2 adsorption. We report a novel guanidinium-based covalent organic framework (COF), termed TGDM, which can efficiently capture I2 under industrial operating conditions. At 150 °C and 150 ppmv I2, TGDM exhibits an I2 uptake of â¼30 wt %, which is significantly higher than that of the industrial silver-based adsorbents such as Ag@MOR (17 wt %) currently used in the nuclear fuel reprocessing industry. Characterization and theoretical calculations indicate that among the multiple types of adsorption sites in TGDM, only ionic sites can bond to I2 through strong Coulomb interactions under harsh conditions. The abundant ionic groups of TGDM account for its superior I2 capture performance compared to various benchmark adsorbents. In addition, TGDM exhibits exceptionally high chemical and thermal stabilities that fully meet the requirements of practical radioactive I2 capture (high-temperature, humid, and acidic environment) and differentiate it from other ionic COFs. Furthermore, TGDM has excellent recyclability and low cost, which are unavailable for the current industrial silver-based adsorbents. These advantages make TGDM a promising candidate for capturing I2 vapor during nuclear fuel reprocessing. This strategy of incorporating chemically stable ionic guanidine moieties in COF would stimulate the development of new adsorbents for I2 capture and related applications.
RESUMO
Objective: To study the effect of health education combined with personalized psychological nursing intervention on pregnancy outcome of pregnant women with gestational diabetes mellitus (GDM). Methods: 170 patients with GDM admitted to Guangdong Women and Children Hospital from January 2018 to December 2018 were selected as study subjects and randomly divided into two groups. During the period from diagnosis of GDM to termination of pregnancy, both groups were given routine education and routine examination, and the intervention group adopted health education combined with personalized psychological nursing interventions during pregnancy. The pregnancy weight, blood glucose index, compliance, disease awareness, self-adjustment management ability, satisfaction, and pregnancy outcome were measured before and after the intervention. Results: There were no statistically significant differences in pregnancy weight, fasting plasma glucose, and 2 h postprandial blood glucose between the two groups before intervention (P = 0.768, 0.605, and 0.762). After intervention, lower levels of the above indicators were obtained in the intervention group than in the control group (P < 0.001). The compliance and satisfaction with the intervention in the intervention group were significantly higher than those in the control group (P < 0.001). The intervention group had remarkably higher disease awareness rate and self-psychological adjustment and management ability than the control group (P < 0.001). Better pregnancy outcomes were observed in the intervention group compared with the control group (P < 0.001). Conclusion: For patients with GDM, health education combined with personalized psychological nursing on the basis of the conventional nursing can effectively control patients' condition and ensure a better pregnancy outcome, which merits widespread promotion.
Assuntos
Diabetes Gestacional , Glicemia , Criança , Feminino , Educação em Saúde , Humanos , Gravidez , Resultado da Gravidez , GestantesRESUMO
To determine the distribution of the anterior chamber parameters and associated factors in cataractous adults from middle China. In this cross-sectional study, axial length, anterior chamber depth (ACD) and lens thickness (LT) were measured with IOLMaster 700. The Pentacam HR was designed to measure the anterior chamber volume (ACV) and anterior chamber angle (ACA). Patients' data were collected and analyzed between 2020 and 2022. A total of 157 eyes of 157 Chinese adults (mean age: 64.43â ±â 12.16 years) with a cataract were enrolled in this study. The mean values measured were as follows: axial length, 24.10â ±â 2.44mm; ACD, 2.99â ±â 0.52 mm; LT, 4.51â ±â 0.48 mm; ACV, 113.98â ±â 45.12 mm3; ACA, 32.33â ±â 7.66 degrees. The ACD and ACV were statistically significantly greater in men than in women and had a decrease trend as age and LT increased. In the simulated linear equation of age with ACD and LT the absolute slope coefficients of equations were the same; however, the directions were opposite. The mean ACV was <100 mm3 when the patients were over 60 years. In the multivariate regression analysis of ACD, ACV and ACA there was a reasonable prediction with adjusted R2â =â 0.878, 0.847 and 0.564, respectively. This study may provide normative data for cataract patients. The profile of anterior chamber can help improve the knowledge of the risk of angle closure in cataract candidates.
Assuntos
Extração de Catarata , Catarata , Masculino , Adulto , Humanos , Feminino , Pessoa de Meia-Idade , Idoso , Estudos Transversais , Câmara Anterior , Catarata/epidemiologia , China/epidemiologiaRESUMO
Adsorption-based iodine (I2 ) capture has great potential for the treatment of radioactive nuclear waste. In this study, we apply a "multivariate" synthetic strategy to construct ionic covalent organic frameworks (iCOFs) with a large surface area, high pore volume, and abundant binding sites for I2 capture. The optimized material iCOF-AB-50 exhibits a static I2 uptake capacity of 10.21â g g-1 at 75 °C and a dynamic uptake capacity of 2.79â g g-1 at ≈400â ppm I2 and 25 °C, far exceeding the performances of previously reported adsorbents under similar conditions. iCOF-AB-50 also exhibits fast adsorption kinetics, good moisture tolerance, and full reusability. The promoting effect of ionic groups on I2 adsorption has been elucidated by experimentally identifying the iodine species adsorbed at different sites and calculating their binding energies. This work demonstrates the essential role of balancing the textural properties and binding sites of the adsorbent in achieving a high I2 capture performance.
RESUMO
Lignin, which is a component of wood, is difficult to degrade in nature. However, serious decay caused by microbial consortia can happen to wooden antiques during the preservation process. This study successfully screened four microbial consortia with lignin degradation capabilities (J-1, J-6, J-8 and J-15) from decayed wooden antiques. Their compositions were identified by genomic sequencing, while the degradation products were analyzed by GC-MS. The lignin degradation efficiency of J-6 reached 54% after 48 h with an initial lignin concentration of 0.5 g/L at pH 4 and rotation speed of 200 rpm. The fungal consortium of J-6 contained Saccharomycetales (98.92%) and Ascomycota (0.56%), which accounted for 31% of the total biomass. The main bacteria in J-6 were Shinella sp. (47.38%), Cupriavidus sp. (29.84%), and Bosea sp. (7.96%). The strongest degradation performance of J-6 corresponded to its composition, where Saccharomycetales likely adapted to the system and improved lignin degradation enzymes activities, and the abundant bacterial consortium accelerated lignin decomposition. Our work demonstrated the potential utilization of microbial consortia via the synergy of microbial consortia, which may overcome the shortcomings of traditional lignin biodegradation when using a single strain, and the potential use of J-6 for lignin degradation/removal applications.
Assuntos
Lignina/metabolismo , Consórcios Microbianos/genética , Madeira/metabolismo , Madeira/microbiologia , Ascomicetos/genética , Biodegradação Ambiental , Biomassa , Bradyrhizobiaceae/genética , Cupriavidus/genética , DNA Bacteriano/genética , DNA Fúngico/genética , Cromatografia Gasosa-Espectrometria de Massas , Lacase/metabolismo , Peroxidases/metabolismo , Rhizobiaceae/genética , Saccharomycetales/genética , Análise de Sequência de DNARESUMO
PURPOSE: Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) binds to death receptor (DR) 4 and DR5 and induces tumor-selective apoptosis. The fusion proteins NCTR25-TRAIL and NCTR25-TGF3L-TRAIL self-assembled into polymers and triggered super-active cancer cell killing. The role of TGF3L in self-assembly and super-activity was unclear. These multivalent TRAILs elicited apoptosis with great potency, but their specificity towards receptors and subsequent efficacy in signal activation were unclear. METHODS: NCTR25-TRAIL fusion was constructed and prokaryotically expressed. The size of fusion protein polymers was estimated. Their cytotoxicity was assessed in eight cancer cell lines and two noncancerous cell lines. Receptor binding and activation specificity were determined by antibody blockade. Apoptosis was evaluated, and the associated pathway was verified by quantifying caspase activity. The NF-κB signaling pathway was assessed by dual-luciferase assay. The in vivo antitumor activity was also evaluated in nude mice. RESULTS: NCTR25 fusion to TRAIL promoted its self-assembly into polymers and showed similar super-cytotoxicity to NCTR25-TGF3L-TRAIL in vitro. The multivalent TRAILs exclusively activated both DR4 and DR5 and showed a bias towards DR4 in mediating cytotoxicity in NCI-H460 cells. They activated caspase pathway and induced apoptosis with higher potency but in similar efficacy than TRAIL. A higher potency and a greater efficacy were observed in activating NF-κB pathway by NCTR25-TRAIL comparing to TRAIL. Both the polymers showed better in vivo antitumor activity than TRAIL. CONCLUSIONS: NCTR25 fusion alone facilitates the formation of TRAIL polymers. Multivalent TRAIL polymers bind and activate DR4 and DR5 specifically and exclusively, triggering the signaling pathways with higher potency, and greater efficacy than TRAIL.
Assuntos
Polímeros/metabolismo , Proteínas Recombinantes de Fusão/metabolismo , Ligante Indutor de Apoptose Relacionado a TNF/metabolismo , Animais , Apoptose/fisiologia , Linhagem Celular , Linhagem Celular Tumoral , Feminino , Células HEK293 , Células HeLa , Humanos , Células MCF-7 , Camundongos , Camundongos Endogâmicos BALB C , Camundongos Nus , Transdução de Sinais/fisiologiaRESUMO
Successful implementation of carbon molecular sieve (CMS) membranes in large scale chemical processes inevitably relies on fabrication of high performance integrally skinned asymmetric or thin-film composite membranes. In principle, to maximize separation efficiency the selective CMS layer should be as thin as possible which requires its lateral confinement to a supporting structure. In this work, we studied pyrolysis-induced structural development as well as ethanol vapor-induced swelling of ultrathin CMS films made from a highly aromatic polyimide of an intrinsic microporosity (PIM-PI) precursor. Utilization of a light polarization-sensitive technique, spectroscopic ellipsometry, allowed for the identification of an internal orientation within the turbostratic amorphous CMS structure driven by the laterally constraining support. Our results indicated a significant thickness dependence both in the extent of pyrolytic collapse and response to organic vapor penetrant. Thinner, substrate-confined films (â¼30 nm) collapsed more extensively leading to a reduction of microporosity in comparison to their thicker (â¼300 nm) as well as self-supported (â¼70 µm) counterparts. The reduced microporosity in the thinner films induced changes in the balance between penetrant-induced dilation (swelling) and filling of micropores. In comparison to thicker films, the initial lower microporosity of the thinner films was accompanied by slightly enhanced organic vapor-induced swelling. The presented results are anticipated to generate the fundamental knowledge necessary to design optimized ultrathin CMS membranes. In particular, our results reinforce previous findings that excessive reduction of the selective layer thickness in amorphous microporous materials (such as PIMs or CMS) beyond several hundred nanometers may not be optimal for maximizing their fluid transport performance.
RESUMO
Sorption-based atmospheric water harvesting (SAWH), which uses sorbents to capture water vapor from the air and low-grade energy to produce fresh liquid water, has been recognized as a promising strategy for decentralized water supply in arid areas. This review aims to summarize the latest progress in this field and provide perspectives for the further development of SAWH, focusing on the design of sorbent materials and the optimization of the entire system. We first introduce the water sorption mechanisms on different sorbent materials. Next, we discuss the properties and performances of various sorbents developed for SAWH by categorizing them into specific groups: nanoporous solids, hygroscopic polymers, salt-based composites, and liquid sorbents; for each type of sorbent materials, we have analyzed its advantages and limitations, as well as design strategies. In addition, we discuss the influences of the mass and heat transport of the SAWH system on its overall performance in actual operations, and introduce different types of water harvesters developed for SAWH. In the last section, we outline the challenges in this field from fundamental research and practical application aspects, and describe roadmaps for the future development of this technology.