Silk Fibroin Degradation Related to Rheological and Mechanical Properties.

Regenerated silk fibroin has been proposed as a material substrate for biomedical, optical, and electronic applications. Preparation of the silk fibroin solution requires extraction (degumming) to remove contaminants, but results in the degradation of the fibroin protein. Here, a mechanism of fibroin degradation is proposed and the molecular weight and polydispersity is characterized as a function of extraction time. Rheological analysis reveals significant changes in the viscosity of samples while mechanical characterization of cast and drawn films shows increased moduli, extensibility, and strength upon drawing. Fifteen minutes extraction time results in degraded fibroin that generates the strongest films. Structural analysis by wide angle X-ray scattering (WAXS) and Fourier transform infrared spectroscopy (FTIR) indicates molecular alignment in the drawn films and shows that the drawing process converts amorphous films into the crystalline, ß-sheet, secondary structure. Most interesting, by using selected extraction times, films with near-native crystallinity, alignment, and molecular weight can be achieved; yet maximal mechanical properties for the films from regenerated silk fibroin solutions are found with solutions subjected to some degree of degradation. These results suggest that the regenerated solutions and the film casting and drawing processes introduce more complexity than native spinning processes.

Injectable silk foams for soft tissue regeneration.

Soft tissue fillers are needed for restoration of a defect or augmentation of existing tissues. Autografts and lipotransfer have been under study for soft tissue reconstruction but yield inconsistent results, often with considerable resorption of the grafted tissue. A minimally invasive procedure would reduce scarring and recovery time as well as allow the implant and/or grafted tissue to be placed closer to existing vasculature. Here, the feasibility of an injectable silk foam for soft tissue regeneration is demonstrated. Adipose-derived stem cells survive and migrate through the foam over a 10-d period in vitro. The silk foams are also successfully injected into the subcutaneous space in a rat and over a 3-month period integrating with the surrounding native tissue. The injected foams are palpable and soft to the touch through the skin and returning to their original dimensions after pressure is applied and then released. The foams readily absorb lipoaspirate making the foams useful as a scaffold or template for existing soft tissue filler technologies, useful either as a biomaterial alone or in combination with the lipoaspirate.

The use of silk-based devices for fracture fixation.

Metallic fixation systems are currently the gold standard for fracture fixation but have problems including stress shielding, palpability and temperature sensitivity. Recently, resorbable systems have gained interest because they avoid removal and may improve bone remodelling due to the lack of stress shielding. However, their use is limited to paediatric craniofacial procedures mainly due to the laborious implantation requirements. Here we prepare and characterize a new family of resorbable screws prepared from silk fibroin for craniofacial fracture repair. In vivo assessment in rat femurs shows the screws to be self-tapping, remain fixed in the bone for 4 and 8 weeks, exhibit biocompatibility and promote bone remodelling. The silk-based devices compare favourably with current poly-lactic-co-glycolic acid fixation systems, however, silk-based devices offer numerous advantages including ease of implantation, conformal fit to the repair site, sterilization by autoclaving and minimal inflammatory response.

Failure under stress: the effect of the exotic herbivore Adelges tsugae on biomechanics of Tsuga canadensis.

BACKGROUND AND AIMS: Exotic herbivores that lack a coevolutionary history with their host plants can benefit from poorly adapted host defences, potentially leading to rapid population growth of the herbivore and severe damage to its plant hosts. The hemlock woolly adelgid (Adelges tsugae) is an exotic hemipteran that feeds on the long-lived conifer eastern hemlock (Tsuga canadensis), causing rapid mortality of infested trees. While the mechanism of this mortality is unknown, evidence indicates that A. tsugae feeding causes a hypersensitive response and alters wood anatomy. This study investigated the effect of A. tsugae feeding on biomechanical properties at different spatial scales: needles, twigs and branches. METHODS: Uninfested and A. tsugae-infested samples were collected from a common garden experiment as well as from naturally infested urban and rural field sites. Tension and flexure mechanical tests were used to quantify biomechanical properties of the different tissues. In tissues that showed a significant effect of herbivory, the potential contributions of lignin and tissue density on the results were quantified. KEY RESULTS: Adelges tsugae infestation decreased the abscission strength, but not flexibility, of needles. A. tsugae feeding also decreased mechanical strength and flexibility in currently attacked twigs, but this effect disappeared in older, previously attacked branches. Lignin and twig tissue density contributed to differences in mechanical strength but were not affected by insect treatment. CONCLUSIONS: Decreased strength and flexibility in twigs, along with decreased needle strength, suggest that infested trees experience resource stress. Altered growth patterns and cell wall chemistry probably contribute to these mechanical effects. Consistent site effects emphasize the role of environmental variation in mechanical traits. The mechanical changes measured here may increase susceptibility to abiotic physical stressors in hemlocks colonized by A. tsugae. Thus, the interaction between herbivore and physical stresses is probably accelerating the decline of eastern hemlock, as HWA continues to expand its range.

Ion Electrodiffusion Governs Silk Electrogelation.

Silk electrogelation involves the transition of an aqueous silk fibroin solution to a gel state (E-gel) in the presence of an electric current. The process is based on local pH changes as a result of water electrolysis - generating H(+) and OH(-) ions at the (+) and (-) electrodes, respectively. Silk fibroin has a pI=4.2 and when local pH

Measurement of fetal heart rate variability on an electronic monitor using a prototype electronic ruler.

OBJECTIVE: To develop a prototype electronic ruler for assessment of fetal heart rate (FHR) variability on an electronic monitor and test its reliability and accuracy. STUDY DESIGN: A prototype electronic ruler was designed and developed for assessment of FHR variability on electronic monitors. The electronic ruler consisted of horizontal bands that were sized and colored to embed the four FHR variability categories. The reliability and accuracy of using the electronic ruler to assess FHR variability was studied with expert clinicians. RESULTS: Intrarater and interrater reliability was moderate for both the electronic ruler and paper strips. The amplitude measurement accuracy of expert variability assessment compared with a gold standard was significantly improved (p < 0.001) with the electronic ruler versus paper strips. The accuracy of subjects' FHR variability category responses compared with the gold standard revealed no significant difference (p = 0.50) using either display type. CONCLUSION: Performance of the electronic ruler was equivalent to paper strips, which may aid assessment of variability on electronic monitors as paper strips become less prevalent.

GoQBot: a caterpillar-inspired soft-bodied rolling robot.

Rolling locomotion using an external force such as gravity has evolved many times. However, some caterpillars can curl into a wheel and generate their own rolling momentum as part of an escape repertoire. This change in body conformation occurs well within 100 ms and generates a linear velocity over 0.2 m s(-1), making it one of the fastest self-propelled wheeling behaviors in nature. Inspired by this behavior, we construct a soft-bodied robot to explore the dynamics and control issues of ballistic rolling. This robot, called GoQBot, closely mimics caterpillar rolling. Analyzing the whole body kinematics and 2D ground reaction forces at the robot ground anchor reveals about 1G of acceleration and more than 200 rpm of angular velocity. As a novel rolling robot, GoQBot demonstrates how morphing can produce new modes of locomotion. Furthermore, mechanical coupling of the actuators improves body coordination without sensory feedback. Such coupling is intrinsic to soft-bodied animals because there are no joints to isolate muscle-generated movements. Finally, GoQBot provides an estimate of the mechanical power for caterpillar rolling that is comparable to that of a locust jump. How caterpillar musculature produces such power in such a short time is yet to be discovered.

Bioreactor system using noninvasive imaging and mechanical stretch for biomaterial screening.

Screening of biomaterial and tissue systems in vitro, for guidance of performance in vivo, remains a major requirement in the field of tissue engineering. It is critical to understand how culture stimulation affects both tissue construct maturation and function, with the goal of eliminating resource-intensive trial-and-error screening and better matching specifications for various in vivo needs. In this article a multifunctional and robust bioreactor design that addresses this need is presented. The design enables a range of mechanical inputs, durations, and frequencies to be applied in coordination with noninvasive optical assessments. A variety of biomaterial systems, including micro- and nano-fiber and porous sponge biomaterials, as well as cell-laden tissue engineering constructs were used in validation studies to demonstrate the versatility and utility of this new bioreactor design. The silk-based biomaterials highlighted in these studies offered several unique optical signatures for use in label-free nondestructive imaging that allowed for sequential profiling. Both short- and long-term culture studies were conducted to evaluate several practical scenarios of usage: on a short-term basis, the authors demonstrate that construct cellularity can be monitored by usage of nonpermanent dyes; on a more long-term basis, the authors show that cell ingrowth can be monitored by green-fluorescent protein (GFP)-labeling, and construct integrity probed with concurrent load/displacement data. The ability to nondestructively track cells, biomaterials, and new matrix formation without harvesting designated samples at each time point will lead to less resource-intensive studies and should enhance our understanding and the discovery of biomaterial designs related to functional tissue engineering.

A model for the stretch-mediated enzymatic degradation of silk fibers.

To restore physiological function through regenerative medicine, biomaterials introduced into the body must degrade at a rate that matches new tissue formation. For effective therapies, it is essential that we understand the interaction between physiological factors, such as routine mechanical loading specific to sites of implantation, and the resultant rate of material degradation. These relationships are poorly characterized at this time. We hypothesize that mechanical forces alter the rates of remodeling of biomaterials, and this impact is modulated by the concentration of enzymes and the duration of the mechanical loads encountered in situ. To test this hypothesis we subjected silk fibroin fibers to repeated cyclic loading in the presence of enzymatic degradation (either alpha-chymotrypsin or Protease XIV) and recorded the stress-strain response. Data were collected daily for a duration of 2 weeks and compared to the control cases of stretched fibers in the presence of phosphate buffered saline or non-stretched samples in the presence of enzyme alone. We observed that incubation with proteases in the absence of mechanical loads causes a reduction of the ultimate tensile strength but no change in stiffness. However, cyclic loading caused the accumulation of residual strain and softening in the material's properties. We utilize these data to formulate a mathematical model to account for residual strain and reduction of mechanical properties during silk fiber degradation. Numerical predictions are in fair agreement with experimental data. The improved understanding of the degradation phenomenon will be significant in many clinical repair cases and may be synergistic to decrease silk's mechanical properties after in vivo implantation.

The consolidation behavior of silk hydrogels.

Hydrogels have mechanical properties and structural features that are similar to load-bearing soft tissues including intervertebral disc and articular cartilage, and can be implanted for tissue restoration or for local release of therapeutic factors. To help predict their performance, mechanical characterization and mathematical modeling are the available methods for use in tissue engineering and drug delivery settings. In this study, confined compression creep tests were performed on silk hydrogels, over a range of concentrations, to examine the phenomenological behavior of the gels under a physiological loading scenario. Based on the observed behavior, we show that the time-dependent response can be explained by a consolidation mechanism, and modeled using Biot's poroelasticity theory. Two observations are in strong support of this modeling framework, namely, the excellent numerical agreement between increasing load step creep data and the linear Terzaghi theory, and the similar values obtained from numerical simulations and direct measurements of the permeability coefficient. The higher concentration gels (8% and 12% w/v) clearly show a strain-stiffening response to creep loading with increasing loads, while the lower concentration gel (4% w/v) does not. A nonlinear elastic constitutive formulation is employed to account for the stiffening. Furthermore, an empirical formulation is used to represent the deformation-dependent permeability.

Effect of hydration on silk film material properties.

Effects of hydration on silk fibroin film properties were investigated for water-annealed and MeOH-treated samples. Hydration increased thickness by 60% for MeOH-immersed films, while water-annealed samples remained constant. MeOH-immersed films showed an 80% mass loss due to water, while water-annealed lost only 40%. O(2) permeability was higher in MeOH-immersed films with Dk values of 10(-10) (mL O(2) x cm) x (cm(-1) x s(-1) x mmHg(-1)), while those of water-annealed films reached only one fifth of this value. All films showed a decrease in Young's modulus and increased plastic deformation by two orders of magnitude when submerged in saline solution. FT-IR showed that beta-sheet content in water-annealed films increased with increasing water vapor pressure, while MeOH-immersed films showed no change.

Non-equilibrium silk fibroin adhesives.

Regenerated silkworm silk solutions formed metastable, soft-solid-like materials (e-gels) under weak electric fields, displaying interesting mechanical characteristics such as dynamic adhesion and strain stiffening. Raman spectroscopy, in situ electric field dynamic oscillatory rheology and polarized optical microscopy indicated that silk fibroin electrogelation involved intermolecular self-assembly of silk molecules into amorphous, micron-scale, micellar structures and the formation of relatively long lifetime, intermicellar entanglement crosslinks. Overall, the electrogelation process did not require significant intramolecular beta-strand or intermolecular beta-sheet formation, unlike silk hydrogels. The kinetics of e-gel formation could be tuned by changing the field strength and assembly conditions, such as silk concentration and solution pH, while e-gel stiffness was partially reversible by removal of the applied field. Transient adhesion testing indicated that the adhesive characteristics of e-gels could at least partially be attributed to a local increase in proton concentration around the positive electrode due to the applied field and surface effects. A working model of electrogelation was described en route to understanding the origins of the adhesive characteristics.

Soft tissue augmentation using silk gels: an in vitro and in vivo study.

BACKGROUND: Restoration of a three-dimensional shape with soft tissue augmentation is a challenge for surgical reconstruction and esthetic improvement of intraoral mucosa and perioral skin tissues. A connective tissue graft or free gingival graft, classically used for such indications, requires a donor site, which may lead to various clinical complications. METHODS: In this article, a new three-dimensional scaffold made of silk fibroin that could be of great interest for these indications was studied. Mechanical tests were conducted to characterize the physical properties of the materials. The biocompatibility of such scaffolds was positively assessed in vitro using a combination of immunostaining, 5-bromo-2'-deoxyuridine proliferation assays, and histologic staining. Finally, the shaped material was grafted subcutaneously in nude mice for a long-time implantation study. RESULTS: Human fibroblasts embedded in this material had a survival rate up to 68.4% and were able to proliferate and synthesize proteins. One month after subcutaneous implantation, the three-dimensional soft tissue augmentation was stable, and histologic analysis revealed revascularization of the area through the biomaterial. A mild inflammatory reaction disappeared after 12 weeks. CONCLUSION: The results indicate that silk-gel material was able to create a lasting three-dimensional soft tissue augmentation and is a promising biomaterial for periodontal and maxillofacial therapies, either as a scaffold for cells or alone as a biomaterial.

Dynamic culture conditions to generate silk-based tissue-engineered vascular grafts.

Tissue engineering is an alternative approach for the preparation of small-diameter (<6mm) vascular grafts due to the potential to control thrombosis, anastomotic cellular hyperplasia and matrix production. This control also requires the maintenance of graft patency in vivo, appropriate mechanical properties and the formation of a functional endothelium. As a first step in generating such tissue-engineered vascular grafts (TEVGs), our objective was to develop a tissue-engineered construct that mimicked the structure of blood vessels using tubular electrospun silk fibroin scaffolds (ESFSs) with suitable mechanical properties. Human coronary artery smooth muscle cells (HCASMCs) and human aortic endothelial cells (HAECs) were sequentially seeded onto the luminal surface of the tubular scaffolds and cultivated under physiological pulsatile flow. The results demonstrated that TEVGs under dynamic flow conditions had better outcome than static culture controls in terms of cell proliferation and alignment, ECM production and cell phenotype based on transcript and protein level assessments. The metabolic activity of HCASMCs present in the TEGs indicated the advantage of dynamic flow over static culture in effective nutrient and oxygen distribution to the cells. A matrigel coating as a basement membrane mimic for ECM significantly improved endothelium coverage and retention under physiological shear forces. The results demonstrate the successful integration of vascular cells into silk electrospun tubular scaffolds as a step toward the development of a TEVG similar to native vessels in terms of vascular cell outcomes and mechanical properties.

Bone tissue engineering with premineralized silk scaffolds.

Silk fibroin biomaterials are being explored as novel protein-based systems for cell and tissue culture. In the present study, biomimetic growth of calcium phosphate on porous silk fibroin polymeric scaffolds was explored to generate organic/inorganic composites as scaffolds for bone tissue engineering. Aqueous-derived silk fibroin scaffolds were prepared with the addition of polyaspartic acid during processing, followed by the controlled deposition of calcium phosphate by exposure to CaCl(2) and Na(2)HPO(4). These mineralized protein-composite scaffolds were subsequently seeded with human bone marrow stem cells (hMSC) and cultured in vitro for 6 weeks under osteogenic conditions with or without BMP-2. The extent of osteoconductivity was assessed by cell numbers, alkaline phosphatase and calcium deposition, along with immunohistochemistry for bone-related outcomes. The results suggest increased osteoconductive outcomes with an increase in initial content of apatite and BMP-2 in the silk fibroin porous scaffolds. The premineralization of these highly porous silk fibroin protein scaffolds provided enhanced outcomes for the bone tissue engineering.

Spider silks and their applications.

Spider silks are characterized by remarkable diversity in their chemistry, structure and functions, ranging from orb web construction to adhesives and cocoons. These unique materials have prompted efforts to explore potential applications of spider silk equivalent to those of silkworm silks, which have undergone 5,000 years of domestication and have a variety of uses, from textiles to biomedical materials. Recent progress in genetic engineering of spider silks and the development of new chimeric spider silks with enhanced functions and specific characteristics have advanced spider silk technologies. Further progress in yields of expressed spider-silk proteins, in the control of self-assembly processes and in the selective exploration of material applications is anticipated in the future. The unique features of spider silks, the progress and challenges in the cloning and expression of these silks, environmentally triggered silk assembly and disassembly and the formation of fibers, films and novel chimeric composite materials from genetically engineered spider silks will be reviewed.

Sonication-induced gelation of silk fibroin for cell encapsulation.

Purified native silk fibroin forms beta-sheet-rich, physically cross-linked, hydrogels from aqueous solution, in a process influenced by environmental parameters. Previously we reported gelation times of days to weeks for aqueous native silk protein solutions, with high ionic strength and temperature and low pH responsible for increasing gelation kinetics. Here we report a novel method to accelerate the process and control silk fibroin gelation through ultrasonication. Depending on the sonication parameters, including power output and time, along with silk fibroin concentration, gelation could be controlled from minutes to hours, allowing the post-sonication addition of cells prior to final gel setting. Mechanistically, ultrasonication initiated the formation of beta-sheets by alteration in hydrophobic hydration, thus accelerating the formation of physical cross-links responsible for gel stabilization. K(+) at physiological concentrations and low pH promoted gelation, which was not observed in the presence of Ca(2+). The hydrogels were assessed for mechanical properties and proteolytic degradation; reported values matched or exceeded other cell-encapsulating gel material systems. Human bone marrow derived mesenchymal stem cells (hMSCs) were successfully incorporated into these silk fibroin hydrogels after sonication, followed by rapid gelation and sustained cell function. Sonicated silk fibroin solutions at 4%, 8%, and 12% (w/v), followed by mixing in hMSCs, gelled within 0.5-2 h. The cells grew and proliferated in the 4% gels over 21 days, while survival was lower in the gels with higher protein content. Thus, sonication provides a useful new tool with which to initiate rapid sol-gel transitions, such as for cell encapsulation.

Innovative dynamic minimally invasive training environment (DynaMITE).

Existing laparoscopic box trainers consist only of static tasks and do not adequately prepare surgeons to navigate the dynamic surgical environment. This paper describes an innovative design using controlled motorized target movements to enhance the training of dynamic motor skills. The prototype was tested using 15 subjects with different surgical experience levels. The task required accurate contact, using a laparoscopic tool, with targets moving in 5 different movement trajectories: (1) static, (2) horizontal, (3) vertical, (4) slow hourglass-shaped, and (5) fast hourglass-shaped. Expert surgeons were significantly faster than novices in the static, horizontal, and slow hourglass target conditions. Intermediate experienced subjects (PGY2s) were faster than novices in the horizontal target condition only. In the fast hourglass condition, experts were not faster than less experienced and novice subjects, but they were more accurate. There is the potential to train hand-eye coordination of even expert surgeons using this dynamic environment.

Bone regeneration on macroporous aqueous-derived silk 3-D scaffolds.

Spinner flask culture under osteogenic conditions was used to study osteogenic outcomes from human bone marrow-derived mesenchymal stem cells (hMSCs) seeded on aqueous-derived porous silk scaffolds. Of particular novelty was the use of larger sized scaffolds (15 mm diameter, 5 mm thick) and large pore sizes ( approximately 900-1 000 micron diameter). Cultures were maintained for 84 d in the spinner flasks and compared to static controls under otherwise similar conditions. The spinner flask cultures demonstrated enhanced cell proliferation compared to static cultures and the improved fluid flow promoted significantly improved osteogenic related outcomes based on elevated alkaline phosphatase (ALP) activity and the deposition of mineralized matrix. The expression of osteogenic differentiation associated markers based on real time PCR also demonstrated increased responses under the dynamic spinner flask culture conditions. Histological analysis showed organized bone-like structures in the constructs cultured in the spinner flasks after 56 d of culture. These structures stained intensely with von Kossa. The combination of improved transport due to spinner flask culture and the use of macroporous 3D aqueous-derived silk scaffolds with large pore sizes resulted in enhanced outcomes related to bone tissue engineering, even with the use of large sized scaffolds in the study. These results suggest the importance of the structure of the silk biomaterial substrate (water vs. solvent based preparation) and large pore sizes in improved bone-like outcomes during dynamic cultivation.