Antioxidant, Antibacterial and Antibiofilm Activity of Nanoemulsion-Based Natural Compound Delivery Systems Compared with Non-Nanoemulsified Versions.

This study aimed to develop nanoemulsions with a focus on improving the bioactivity of oregano essential oil (OEO), carvacrol and thymol for possible food applications. Nanoemulsions were prepared with acoustic cavitation using ultrasound. The nanodroplets had average diameters of 54.47, 81.66 and 84.07 nm for OEO, thymol and carvacrol, respectively. The main compound in OEO was carvacrol (74%), and the concentration in the nanoemulsions was 9.46 mg/mL for OEO and the isolated compounds. The effects of droplet size reduction on antioxidant, antibacterial and antibiofilm activity were evaluated. Regarding antioxidant activity, the nanoemulsions performed better at the same concentration, with inhibitions >45% of the DPPH radical and significant differences compared with their non-nanoemulsified versions (p < 0.05). The nanoemulsions' minimum inhibitory concentration (MIC) and non-nanoemulsified compounds were evaluated against foodborne pathogens with inhibition ranges between 0.147 and 2.36 mg/mL. All evaluated pathogens were more sensitive to nanoemulsions, with reductions of up to four times in MIC compared with non-nanoemulsified versions. E. coli and S. Enteritidis were the most sensitive bacteria to the carvacrol nanoemulsion with MICs of 0.147 mg/mL. Concerning antibiofilm activity, nanoemulsions at concentrations up to four times lower than non-nanoemulsified versions showed inhibition of bacterial adhesion >67.2% and removal of adhered cells >57.7%. Overall, the observed effects indicate that droplet size reduction improved the bioactivity of OEO, carvacrol and thymol, suggesting that nanoemulsion-based delivery systems for natural compounds may be alternatives for food applications compared with free natural compounds.

Micro- and nanoencapsulation of natural phytochemicals: Challenges and recent perspectives for the food and nutraceuticals industry applications.

Worldwide, there has been growing interest in the research, development, and commercialization of functional bioactive components and nutraceuticals. As a result of consumer awareness of the relationship between diet, health, and disease, the consumption of plant-derived bioactive components has recently increased in the past two decades. Phytochemicals are bioactive nutrient plant chemicals in fruits, vegetables, grains, and other plant foods that may provide desirable health benefits beyond essential nutrition. They may reduce the risk of major chronic diseases, cardiovascular diseases, cancer, osteoporosis, diabetes, high blood pressure, and psychotic diseases and have antioxidant, antimicrobial, and antifungal properties, cholesterol-lowering, antithrombotic, or anti-inflammatory effects. Phytochemicals have been recently studied and explored for various purposes, such as pharmaceuticals, agrochemicals, flavors, fragrances, coloring agents, biopesticides, and food additives. These compounds are known as secondary metabolites and are commonly classified as polyphenols, terpenoids (terpenes), tocotrienols and tocopherols, carotenoids, alkaloids and other nitrogen-containing metabolites, stilbenes and lignans, phenolic acids, and glucosinates. Thus, this chapter aims to define the general chemistry, classification, and essential sources of phytochemicals, as well as describe the potential application of phytochemicals in the food and nutraceuticals industry, explaining the main properties of interest of the different compounds. Finally, the leading technologies involving micro and nanoencapsulation of phytochemicals are extensively detailed to protect them against degradation and enhance their solubility, bioavailability, and better applicability in the pharmaceutical, food, and nutraceutical industry. The main challenges and perspectives are detailed.

Artisanal Goat Coalho Cheese with Cachaça as Flavoring Agent.

Cachaça is a traditional Brazilian drink that has the potential to offer a new sensory and technological strategy for artisanal cheesemaking, particularly for small-scale producers and family farming. This study aimed to investigate the effects of cachaça immersion on the physicochemical, microbiological, color, texture, and sensory parameters of artisanal goat coalho cheeses using three different varieties of cachaça immersion. The results showed that cachaça immersion did not affect the cheese's proximate composition or starter culture viability, indicating its suitability as a new method for artisanal cheese production. Additionally, gold cachaça aged in oak casks was the most effective variety for sensory acceptance and purchase intention, suggesting that it may be a valuable strategy for small-scale producers to add value and encourage the consumption of artisanal goat coalho cheeses without compromising their quality. Thus, this study provides important insights for small-scale producers and family farming to enhance their product offerings and increase their competitiveness in the market.

Occurrence of phthalates in different food matrices: A systematic review of the main sources of contamination and potential risks.

This systematic review aimed to investigate the occurrence of phthalates (phthalic acid esters [PAEs]) in different food matrices, as well as report the main sources of PAEs in food, the potential risks to the population, and the factors that influence its migration from food contact materials (FCMs) to food. Nineteen PAEs were identified, including di-(2-ehtylhexyl) phthalate (DEHP), dibutyl-phthalate (DBP), benzylbutyl phthalate (BBP), diisononyl phthalate (DINP), and diisodecyl phthalate (DIDP) in fruits and vegetables, milk and dairy products, cereals, meat, fish, fat and oils, snacks, condiments and sauces, miscellaneous, and baby food. Fifty-seven values of PAEs were above the legal limits of countries. DEHP is the PAE with the highest incidence, with maximum concentrations above the specific migration limit (SML) for milk and dairy products, oils and fats, fish, cereals, condiments and sauces, meat, and fruits and vegetables. The risk of exceeding the tolerable daily intake (TDI) was high for DEHP and DBP in fish, fat and oils, cereals, and milk and dairy products for children and adults. Fat and oils are the most critical food for DEHP, DBP, BBP, and DINP. Comparing the estimated daily intake (EDI) with the TDI, there was a risk for "milk and dairy products" in adults and for "cereal and cereal products" in children concerning DEHP. "Cereal and cereal products" presented a risk in children and adults concerning DBP. The "fat and oils" category presented a risk in children and adults about DBP and DINP. Temperature, contact time between food and the FCM, fat percent, and acidity positively correlate with the PAE's migration. The contamination occurs in many steps of the production chain.

Combination of RT-LAMP and fluorescence spectroscopy using chemometric techniques for an ultra-sensitive and rapid alternative for the detection of SARS-CoV-2.

The increased spread of COVID-19 caused by SARS-CoV-2 has made it necessary to develop more efficient, fast, accurate, specific, sensitive and easy-to-use detection platforms to overcome the disadvantages of gold standard methods (RT-qPCR). Here an approach was developed for the detection of the SARS-CoV-2 virus using the loop-mediated isothermal amplification (LAMP) technique for SARS-CoV-2 RNA target amplification in samples of nasopharyngeal swabs. The discrimination between positive and negative SARS-CoV-2 samples was achieved by using fluorescence spectra generated by the excitation of the LAMP's DNA intercalator dye at λ497 nm in a fluorescence spectrophotometer and chemometric tools. Exploratory analysis of the 83 sample spectra using principal component analysis (PCA) indicated a trend in differentiation between positive and negative samples resulting from the peak emission of the fluorescent dye. The classification was performed by partial least squares discriminant analysis (PLS-DA) achieving a sensitivity, a specificity and an accuracy of 100%, 95% and 89%, respectively for the discrimination between negative and positive samples from 1.58 to 0.25 ng L-1 after LAMP amplification. Therefore, this study indicates that the use of the LAMP technique in fluorescence spectroscopy may offer a fast (<1 hour), sensitive and low-cost method.

A Systematic Review on Nanoencapsulation Natural Antimicrobials in Foods: In Vitro versus In Situ Evaluation, Mechanisms of Action and Implications on Physical-Chemical Quality.

Natural antimicrobials (NA) have stood out in the last decade due to the growing demand for reducing chemical preservatives in food. Once solubility, stability, and changes in sensory attributes could limit their applications in foods, several studies were published suggesting micro-/nanoencapsulation to overcome such challenges. Thus, for our systematic review the Science Direct, Web of Science, Scopus, and Pub Med databases were chosen to recover papers published from 2010 to 2020. After reviewing all titles/abstracts and keywords for the full-text papers, key data were extracted and synthesized. The systematic review proposed to compare the antimicrobial efficacy between nanoencapsulated NA (nNA) and its free form in vitro and in situ studies, since although in vitro studies are often used in studies, they present characteristics and properties that are different from those found in foods; providing a comprehensive understanding of primary mechanisms of action of the nNA in foods; and analyzing the effects on quality parameters of foods. Essential oils and nanoemulsions (10.9-100 nm) have received significant attention and showed higher antimicrobial efficacy without sensory impairments compared to free NA. Regarding nNA mechanisms: (i) nanoencapsulation provides a slow-prolonged release to promote antimicrobial action over time, and (ii) prevents interactions with food constituents that in turn impair antimicrobial action. Besides in vitro antifungal and antibacterial, nNA also demonstrated antioxidant activity-potential to shelf life extension in food. However, of the studies involving nanoencapsulated natural antimicrobials used in this review, little attention was placed on proximate composition, sensory, and rheological evaluation. We encourage further in situ studies once data differ from in vitro assay, suggesting food matrix greatly influences NA mechanisms.

Binding thermodynamics of synthetic dye Allura Red with bovine serum albumin.

The interaction between Allura Red and bovine serum albumin (BSA) was studied in vitro at pH 7.4. The fluorescence quenching was classified as static quenching due to the formation of AR-BSA complex, with binding constant (K) ranging from 3.26±0.09 to 8.08±0.0610(4)L.mol(-1), at the warfarin binding site of BSA. This complex formation was driven by increasing entropy. Isothermal titration calorimetric measurements also showed an enthalpic contribution. The Allura Red diffusion coefficient determined by the Taylor-Aris technique corroborated these results because it reduced with increasing BSA concentration. Interfacial tension measurements showed that the AR-BSA complex presented surface activity, since interfacial tension of the water-air interface decreased as the colorant concentration increased. This technique also provided a complexation stoichiometry similar to those obtained by fluorimetric experiments. This work contributes to the knowledge of interactions between BSA and azo colorants under physiological conditions.

Modification of polysulfone membrane used in the water filtration process to reduce biofouling.

Polysulfone membranes (PSF) were modified with silver nanoparticles obtained by new synthesis (nAgNS), silver nanoparticles obtained commercially (nAgC), silver sulfadiazine (SP), dodecyltrimethylammonium bromide (DOTAB), benzalkonium chloride (CB) or sodium dodecylbenzene sulfonate (DBSS) to improve the efficiency of the water filtration process by reducing biofouling. All membranes had lower hydrophobicity compared with PSF. The zeta potentials of all membranes were negative at pH 7.0, except for CB 10%. In the agar diffusion test, E. coli was considered to be sensitive to the antimicrobial effect of the nAgNS 1%, 3%, 6%, 10% and DOTAB 10%, whereas S. aureus was sensitive to the nAgNS 1%, 3%, 6%, 10%, DOTAB 10%, CB 0.22%, 2% and 10%. The lowest adhesion of E. coli was found in the nAgNS 6% and 10%. In the evaluation of the loss of flow rate during filtration of the E. coli suspension and pure water, nAgNS showed higher flow rate values when compared with PSF. The nAgNS did not release quantities of silver (0.1 mg/l) above the amount considered safe by the World Health Organization. Membranes nAgNS 6% and 10% showed the best anti-biofouling characteristic.

Work of adhesion of dairy products on stainless steel surface

The adhesion of the solids presents in food can difficult the process of surface cleaning and promotes the bacterial adhesion process and can trigger health problems. In our study, we used UHT whole milk, chocolate based milk and infant formula to evaluate the adhesion of Enterobacter sakazakii on stainless steel coupons, and we determine the work of adhesion by measuring the contact angle as well as measured the interfacial tension of the samples. Inaddition we evaluated the hydrophobicity of stainless steel after pre-conditioning with milk samples mentioned. E. sakazakii was able to adhere to stainless steel in large numbers in the presence of dairy products. The chocolate based milk obtained the lower contact angle with stainless steel surface, higher interfacial tension and consequently higher adhesion work. It was verified a tendency of decreasing the interfacial tension as a function of the increasing of protein content. The pre-conditioning of the stainless steel coupons with milk samples changed the hydrophobic characteristics of the surfaces and became them hydrophilic. Therefore, variations in the composition of the milk products affect parameters important that can influence the procedure of hygiene in surface used in food industry.

Work of adhesion of dairy products on stainless steel surface.

The adhesion of the solids presents in food can difficult the process of surface cleaning and promotes the bacterial adhesion process and can trigger health problems. In our study, we used UHT whole milk, chocolate based milk and infant formula to evaluate the adhesion of Enterobacter sakazakii on stainless steel coupons, and we determine the work of adhesion by measuring the contact angle as well as measured the interfacial tension of the samples. In addition we evaluated the hydrophobicity of stainless steel after pre-conditioning with milk samples mentioned. E. sakazakii was able to adhere to stainless steel in large numbers in the presence of dairy products. The chocolate based milk obtained the lower contact angle with stainless steel surface, higher interfacial tension and consequently higher adhesion work. It was verified a tendency of decreasing the interfacial tension as a function of the increasing of protein content. The preconditioning of the stainless steel coupons with milk samples changed the hydrophobic characteristics of the surfaces and became them hydrophilic. Therefore, variations in the composition of the milk products affect parameters important that can influence the procedure of hygiene in surface used in food industry.