RESUMO
OBJECTIVES: To evaluate structural damage and loosening of abutments placed on narrow diameter implants after cyclic fatigue. METHODS: Sixty Morse taper narrow diameter implants (Neodent, Brazil) received two types of abutments (1PA- one-piece abutment or 2PA- two-piece abutment), which were randomly divided into 3 fatigue experiments (n = 10). The implants were placed into a customized supporting holder and a software-assisted digital torque wrench secured the manufacturer recommended torque for each abutment. Cone beam computed tomography (CBCT) scans were acquired, before and after fatigue, and post-processed (software e-Vol DX) to assess damage and abutment displacement. The boundary fatigue method was adapted to use 2 × 106 cycles, 2 Hz of frequency and constant peak load of 80 N (first experiment) that varied according to the failure rate of previous specimens (second and third experiments). Failure was evaluated using CBCT scans and removal torque values. Data were used to estimate long-term torque degradation, probability of failure and Weibull modulus (software ALTA PRO9). RESULTS: All 2PA specimens became loosen independently of the applied fatigue load, and structural bending was observed in 14 abutments. Eight 1PA got loosen during the fatigue experiment. The Weibull analysis showed a lower modulus (m = 1.0; 0.7, 1.4) for 1PA than for 2PA (m = 2.6; 2, 3.4) resulting in longer predicted lifetimes and slower torque degradation for 1PA than for 2PA specimens. SIGNIFICANCE: 1PA showed greater long-term survival probability than 2PA. Predicting the lifetime and mechanical behavior of implant-abutment systems are useful information to clinicians during the decision-making process of oral rehabilitations.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Suporte , Projeto do Implante Dentário-Pivô , Falha de Restauração Dentária , Análise do Estresse Dentário , Torque , Implantes Dentários , Teste de MateriaisRESUMO
OBJECTIVES: To evaluate torque maintenance and structural damage in implant components of different diameters subjected to a fatigue challenge. METHODS: Thirty 10-mm-long, morse taper connection, titanium dental implants and their corresponding one-piece abutments were divided into three groups (n = 10) according to implant diameter: 4.3 mm (I4.3), 3.5 mm (I3.5), and 2.9 mm (I2.9). The implants were placed into a load-bearing fixture simulating bone tissue (modified G10), and the abutments were screwed into the implants to a final torque of 20 Ncm for the I4.3 and I3.5 and 15 Ncm for I2.9. The torque was secured by a digital torque meter. Cone-beam computed tomography (CBCT) scans were acquired and post-processed (e-Vol DX software) for all implant/abutment sets before and after subjecting them to fatigue in 37 °C distilled water (2 million cycles, constant load and frequency). The removal torque was measured using the same digital torque meter to calculate the difference in torque before and after fatigue. RESULTS: I2.9 showed substantial structural deformation compared with the other implant diameters (I3.5 and I4.3). However, the experimental groups did not show statistical differences for abutment loosening. SIGNIFICANCE: Implants smaller than 3.5 mm in diameter have a higher probability of structural deformation than standard-diameter implants. The association between tomographic scans and e-Vol DX software showed satisfactory consistency with the direct assessment using the digital torque meter, offering an additional tool to evaluate implant component loosening and structural deformations.
Assuntos
Implantes Dentários , Projeto do Implante Dentário-Pivô , Torque , Dente Suporte , Análise do Estresse DentárioRESUMO
OBJECTIVE: To assess and compare, through a systematic review of the literature, the biomechanical performance of endocrowns and traditional core-crowns (with and without intracanal post) for the rehabilitation of endodontically treated teeth with severe coronal structure damage. MATERIALS AND METHODS: A systematic search was performed in MEDLINE/PubMed, Scopus, and Web of Science databases. In-vitro studies comparing endocrowns with (post-)core-crown restorations were selected and screened by two independent reviewers. The included studies were submitted to the risk of bias analysis using the RoBDEMAT tool and the biomechanical outcomes were collected for qualitative analysis. The extracted data were presented based on comparative analyses among the included studies. RESULTS: Thirty-one studies were included: 9 studies evaluated restorations of molars, 14 for premolars, and 8 studies evaluated anterior restorations. For the majority of the studies, endocrowns showed either similar or greater survival rates under fatigue and monotonic load than (post-)core-crown restorations, irrespectively of the tooth. The endocrowns showed more favorable failure patterns than (post-)core-crowns, irrespectively of the tooth. Endocrowns produced lower stresses in the restorative material for molars and premolars and in the luting material for premolars than (post-)core-crown restorations. The included studies presented adequate information for most items of the RoBDEMAT risk of bias tool. CONCLUSION: Endocrowns showed similar or greater biomechanical performance than the traditional (post-)core-crown restorations in most of the evaluated studies. CLINICAL SIGNIFICANCE: This systematic review showed that endocrowns present either similar or greater biomechanical performance than core-crown restorations for anterior and posterior endodontically treated teeth with severe structural damage.
Assuntos
Coroas , Dente não Vital , Humanos , Materiais Dentários , Falha de Restauração Dentária , Análise do Estresse Dentário , Teste de Materiais , Dente não Vital/terapia , Prostodontia/métodosRESUMO
PURPOSE: To evaluate the peri-implant outcomes of customized healing abutments (CstHA) placed on dental implants inserted in fresh tooth extraction sockets. MATERIALS AND METHODS: The study was registered on PROSPERO: CRD42022304320. A systematic search in PubMed, Scopus, and Web of Science was conducted between April 2022 and October 2022 to identify clinical studies involving immediate implant surgery associated with CstHA placement. The Joanna Briggs Institute Critical Appraisal and RoB2 tool were performed for the risk of bias analysis. RESULTS: A total of 12 studies were included, most of them with low risk of bias. Four studies compared CstHA vs conventional healing abutments (CnvtHA), two compared CstHA vs cover screw and collagen matrix (CMa), and six were clinical case series. For the CstHA vs CnvtHA comparison, favorable results were observed for CstHA considering papilla maintenance and probing depth, yet the mean marginal bone level was statistically similar between CstHA and CnvtHA. CstHA showed advantages when compared to CMa for total bone volume, papilla height, and midfacial mucosa maintenance. Significantly less horizonal bone loss was reported when using CstHA compared with CMa. Horizontal and vertical bone loss was observed in a few (or no) sites in the case series using CstHA. CONCLUSIONS: CstHA provides favorable peri-implant response because in general it does not result in a significant loss of soft and hard tissues.
Assuntos
Implantes Dentários para Um Único Dente , Implantes Dentários , Carga Imediata em Implante Dentário , Humanos , Carga Imediata em Implante Dentário/métodos , Implantação Dentária Endóssea/métodos , Alvéolo Dental/cirurgia , Extração Dentária/métodos , Dente SuporteRESUMO
There is a constantly growing prevalence of tooth wear in dentistry. The present case report describes a rehabilitation through ceramic restorations of a severely worn dentition based on a conservative intervention, adequate restorative material selection, and adhesive bonding strategies. A 36-year-old patient with a mainly esthetic complaint presented with signs of tooth wear caused by erosion and attrition. Preparations were performed guided by the diagnostic planning. The full-mouth rehabilitation, combined with the correction of the vertical dimension of occlusion, was split into quadrants, and lithium disilicate partial restorations were fabricated. The proposed rehabilitation was based on the maximal preservation of the remaining tooth structure and the adequate selection of restorative materials and adhesive bonding strategies.
Assuntos
Dentição , Desgaste dos Dentes , Humanos , Adulto , Reabilitação Bucal/métodos , Estética Dentária , Cimentos Dentários , Cerâmica/química , Desgaste dos Dentes/reabilitação , Materiais DentáriosRESUMO
OBJECTIVES: This study evaluated the effectiveness of hydrogen peroxide (H2O2) as mouthwash and nasal spray on symptom relief in coronavirus disease 2019 (COVID-19) patients. METHODS: Patients positive for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), who were treated in a hospital or at home, and patients' family members (not positive for SARS-CoV-2), were randomized into 2 groups: experimental (1% H2O2 for gargling, 0.5% H2O2 for nasal wash), and control. Patients gargled the solution 3 times a day, and applied the nasal spray twice a day, for a 7-day period. Family members received the same treatment as the treated COVID-19 patient. The researchers contacted patients every 2 days over an 8-day period. An average post-treatment interval of 8 days passed before testing family members. RESULTS: The most frequent symptoms on day 0 were cough, loss of taste, and hyposmia; there were no significant differences between groups, independent of the period. The symptom of dyspnea presented a significant difference between days 2 and 4 (p<0.05). Among family members, 86.0% had no antibodies, 2.3% had antibodies, and 11.6% had active infections (4 in the experimental group and 6 in the control group). The most frequent adverse effects in the H2O2 group were a burning throat and nose. CONCLUSIONS: H2O2 was not effective for the relief of COVID-19 symptoms and was associated with reports of transient adverse effects.
Assuntos
COVID-19 , Peróxido de Hidrogênio , Brasil , Método Duplo-Cego , Humanos , SARS-CoV-2 , Resultado do TratamentoRESUMO
OBJECTIVES: To evaluate the effectiveness of hydrogen peroxide (H2O2) in the form of mouthwash and nasal spray as an auxiliary treatment for coronavirus disease 2019 (COVID-19). METHODS: Forty hospitalized patients who tested positive for severe acute respiratory syndrome coronavirus 2 using a reverse-transcription polymerase chain reaction test were evaluated. They were randomly divided into an experimental group (n= 20; gargling with 1.0% H2O2 and nasal wash with 0.5% H2O2) or a control group (n= 20). The solutions were used for 7 days and the patients were monitored every 2 days, for a total of 8 days. At check-ups, patients were asked about their symptoms and possible adverse effects of the solutions. The presence and severity (mild, moderate, or severe) of symptoms were recorded. Data were compared using the Student test and the Fisher exact test (α= 0.05). RESULTS: There was no significant difference between the 2 groups in the length of hospital stay (p= 0.65). The most frequent symptom on day 0 was coughing (72.0% in the experimental group and 76.5% in the control group), which abated over time. There was no significant difference between the groups in the evaluated symptoms. Most (75.0%) of the patients in the experimental group presented a reduction in dyspnea between days 0 and 2. Few patients reported adverse effects from the use of the solutions. CONCLUSIONS: H2O2 as a mouthwash and nasal spray is safe to use. There is insufficient evidence to demonstrate that H2O2 is effective as an auxiliary treatment for hospitalized COVID-19 patients.