RESUMO
Methane emissions from ruminants significantly contribute to greenhouse gases. This study explores the methane mitigation effect and mechanism of S. mcclurei through in vitro rumen fermentation, aiming to establish its potential as a feed additive. We investigated the effects of freeze-dried and dried S. mcclurei at supplementation levels of 2%, 5%, and 10% of dry matter on nutrient degradation, ruminal fermentation, methane inhibition, and microbial community structure in in vitro rumen fermentation. The freeze-dried S. mcclurei at 2% supplementation significantly reduced CH4 emissions by 18.85% and enhanced crude protein degradability. However, total VFA and acetate concentrations were lower in both treatments compared to the control. The microbial shifts included a decrease in Lachnospiraceae_NK3A20_group and Ruminococcus and an increase in Selenomonas, Succinivibrio, and Saccharofermentans, promoting propionate production. Additionally, a significant reduction in Methanomicrobium was observed, indicating direct methane mitigation. Freeze-dried S. mcclurei at a 2% supplementation level shows potential as an effective methane mitigation strategy with minimal impact on rumen fermentation, supported by detailed insights into microbial community changes.
RESUMO
Proline 4-hydroxylase 2 (P4HA2) is known for its hydroxylase activity, primarily involved in hydroxylating collagen precursors and promoting collagen cross-linking under physiological conditions. Although its overexpression influences a wide variety of malignant tumors' occurrence and development, its specific effects and mechanisms in oral squamous cell carcinoma (OSCC) remain unclear. This study focused on investigating the expression patterns, carcinogenic functions, and underlying mechanisms of P4HA2 in OSCC cells. Various databases, including TCGA, TIMER, UALCAN, GEPIA, and K-M plotter, along with paraffin-embedded samples, were used to ascertain P4HA2 expression in cancer and its correlation with clinicopathological features. P4HA2 knockdown and overexpression cell models were developed to assess its oncogenic roles and mechanisms. The results indicated that P4HA2 was overexpressed in OSCC and inversely correlated with patient survival. Knockdown of P4HA2 suppressed invasion, migration, and proliferation of OSCC cells both in vitro and in vivo, whereas overexpression of P4HA2 had the opposite effects. Mechanistically, the phosphorylation levels of the PI3K/AKT pathway were reduced following P4HA2 silencing. The study reveals that P4HA2 acts as a promising biomarker for predicting prognosis in OSCC and significantly affects metastasis, invasion, and proliferation of OSCC cells through the regulation of the PI3K/AKT signaling pathway.
Assuntos
Carcinoma de Células Escamosas , Movimento Celular , Proliferação de Células , Neoplasias Bucais , Invasividade Neoplásica , Fosfatidilinositol 3-Quinases , Pró-Colágeno-Prolina Dioxigenase , Proteínas Proto-Oncogênicas c-akt , Transdução de Sinais , Animais , Feminino , Humanos , Masculino , Camundongos , Pessoa de Meia-Idade , Carcinoma de Células Escamosas/patologia , Carcinoma de Células Escamosas/metabolismo , Carcinoma de Células Escamosas/genética , Linhagem Celular Tumoral , Movimento Celular/genética , Regulação Neoplásica da Expressão Gênica , Camundongos Nus , Neoplasias Bucais/patologia , Neoplasias Bucais/metabolismo , Neoplasias Bucais/genética , Metástase Neoplásica , Fosfatidilinositol 3-Quinases/metabolismo , Pró-Colágeno-Prolina Dioxigenase/metabolismo , Pró-Colágeno-Prolina Dioxigenase/genética , Proteínas Proto-Oncogênicas c-akt/metabolismoRESUMO
The aim of this study was to assess the impact of varying proportions (5-20%) of hydroponic wheat sprouts in the diet of growing four-month-old Hu ewes on their productive performance, metabolic profiles, rumen fermentation, and alterations in microflora. Compared with the control group (CON), the optimum final weight of ewes has been presented in the group of substitution 15% (S15) of the basal diet with hydroponic wheat sprouts. Furthermore, 1-30 d the average daily gain (ADG), 31-60 d ADG, and average feed intake were both significantly improved in S15 compared with CON (p < 0.05). Feeding hydroponic wheat sprouts can significantly increase high-density lipoprotein and interleukin-2 (p < 0.05) accompanied by the numerical increase of the content of interferon-γ, suggesting its positive effect on ewes' health and immune systems. In this process, it is noteworthy that feeding hydroponic wheat sprouts results in an increase in relative abundance of Olsenella, Limosilactobacillus, Shuttleworthia, and Prevotella_7, and a decrease in relative abundance of Succinimonas, Pseudobutyrivibrio, and Anaerovibrio in the rumen of growing ewes. It implies that the response of rumen microflora adapted to the change of dietary ingredients, as well as the relationship between rumen microflora changes and the improvement of productive performance and immune system in growing ewes. Considering the usage cost and application effect, S15 of the basal diet with hydroponic wheat sprouts could be the appropriate application solution for growing ewes.
RESUMO
The present work prepared a novel BiMgO-2MBD (X = 0.42) material for iodine vapor capture in temperature conditions related to spent nuclear fuel reprocessing and nuclear accidents. BiMgO-2MBD (X = 0.42) was synthesized by a solvothermal process and exhibited an exceptional ultrafast and high iodine uptake with a capacity of 4352.12 mg/g and 5147.08 mg/g after 5 h at 75 °C and 150 °C, respectively. The TGA analysis shows that Bi/Mg oxide substrate highly contributed to improving the thermal stability of the functionalized BiMgO-2MB (X = 0.42) as indicated by the weight losses of the material components of 3.77 wt%, 29.32 wt%, and 97.72 wt%, respectively for Bi/Mg oxide, BiMgO-2MBD, and 2-MBD. The material characterization and DFT calculations indicate that 2-MBD played a significant role towards improving iodine capture capacity. For long-term and safe waste disposal, a chemically durable waste form was made from etidronic acid and Bi2O3, and successfully immobilized the iodine-loaded wastes (I2 @BiMgO-2MBD) which exhibited a low normalized leaching rate of 1.098 × 10-6 g.m2/day for 7 days under the PCT-A method. In addition, BiMgO-2MBD (X = 0.42) showed an ability to be reused after several regeneration cycles. The comparison with previously reported materials shows that the current BiMgO-2MBD (X = 0.42) is the first functionalized metal oxide comparable to metal-organic and covalent organic frameworks for iodine uptake. BiMgO-2MBD (X = 0.42) shows promising results for practical applications in the gas phase capture of radioactive iodine.
RESUMO
Reproduction in goats is a highly complex and dynamic process of life regulation, involving coordinated regulation from various aspects such as central nervous system regulation, reproductive system development, oocyte maturation, and fertilized egg development. In recent years, researchers have identified numerous genes associated with goat reproductive performance through high-throughput sequencing, single-cell sequencing, gene knockout, and other techniques. However, there is still an urgent need to explore marker genes related to goat reproductive performance. In this study, a single-cell RNA sequencing dataset of oocytes (GSE136005) was obtained from the Gene Expression Omnibus (GEO) database. Weighted Gene Co-expression Network Analysis (WGCNA) was utilized to identify modules highly correlated with goat litter size. Through gene function enrichment analysis, it was found that genes within the modules were mainly enriched in adhesive junctions, cell cycle, and other signaling pathways. Additionally, the top 30 hub genes with the highest connectivity in WGCNA were identified. Subsequently, using Protein-Protein Interaction (PPI) network analysis, the top 30 genes with the highest connectivity within the modules were identified. The intersection of hub genes, key genes in the PPI network, and differentially expressed genes (DEGs) led to the identification of the RPL4 gene as a key marker gene associated with reproductive capacity in goat oocytes. Overall, our study reveals that the RPL4 gene in oocytes holds promise as a biological marker for assessing goat litter size, deepening our understanding of the regulatory mechanisms underlying goat reproductive performance.
RESUMO
Petroleum-based plastics are useful but they pose a great threat to the environment and human health. It is highly desirable yet challenging to develop sustainable structural materials with excellent mechanical and optical properties for plastic replacement. Here, we report a simple and efficient method to manufacture high-performance all-biobased structural materials from cellulosic wood skeleton (WS) and gelatin via oxidation and densification. Specifically, gelatin was grafted to the oxidized cellulose wood skeletons (DAWS) and then physically crosslinked via Tannic acid (TA), resulting in a significant enhancement of the material properties. Notably, only a mild pressure was applied during the drying process to form a densified TA/Gelatin/transparent wood film(TWF). The developed TA/Gelatin/TWF (thickness:100 ± 12 µm) exhibited a desirable combination of high strength (â¼154.59 MPa), light transmittance (86.2 % at 600 nm), low haze (16.7 %), high water stability (wet strength: â¼130.13 MPa) and ultraviolet blocking efficacy which surpass most of the petroleum-based plastics. In addition, due to the all bio-based origins (wood and gelatin), TA/Gelatin/TWF are easily biodegradable under natural conditions, leading to less impact on the environment. These findings would hold promises for exploring high-quality all bio-based wood composites as eco-friendly alternatives to substitute plastics with wide applications, e.g. anti-counterfeiting, UV protection, and flexible electricals.
Assuntos
Celulose Oxidada , Petróleo , Humanos , Gelatina , MadeiraRESUMO
The ultraviolet (UV) blocking performance of current bio-based devices is always limited by delignification and exploited chemical treatment. Lignocellulosic nanofibril (LCNF) is a promising green alternative that could efficiently impede UV radiation. Herein, we proposed a robust LCNF film that achieved 99.8 ± 0.19 % UVB blocking, 96.1 ± 0.23 % UVA blocking, and was highly transparent without complex chemical modification. Compared to conventional lignin composites, this LCNF method involves 29.5 ± 2.31 % lignin content directly extracted from bamboo as a broad-spectrum sun blocker. This bamboo-based LCNF film revealed an excellent tensile strength of 94.9 ± 3.6 MPa and outstanding stability, adapting to the natural environment's variability. The residual hemicellulose could also embed the link between lignin and cellulose, confirming high lignin content in the network. The connection between lignin and hemicelluloses in the cellulose network was explored and described for the fibrillation of lignocellulosic nanofibrils. This research highlights the promising development of LCNFs for UV protection and bio-based solar absorption materials.
RESUMO
The combination of optical transparency and mechanical strength is a highly desirable attribute of wood-based glazing materials. However, such properties are typically obtained by impregnation of the highly anisotropic wood with index-matching fossil-based polymers. In addition, the presence of hydrophilic cellulose leads to a limited water resistance. Herein, this work reports on an adhesive-free lamination that uses oxidation and densification to produce transparent all-biobased glazes. The latter are produced from multilayered structures, free of adhesives or filling polymers, simultaneously displaying high optical clarity and mechanical strength, in both dry and wet conditions. Specifically, high values of optical transmittance (≈85.4%), clarity (≈20% with low haze) at a thickness of ≈0.3 mm, and highly isotropic mechanical strength and water resistance (wet strength of ≈128.25 MPa) are obtained for insulative glazes exhibiting low thermal conductivity (0.27 W m-1 K-1 , almost four times lower than glass). The proposed strategy results in materials that are systematically tested, with the leading effects of self-adhesion induced by oxidation rationalized by ab initio molecular dynamics simulation. Overall, this work demonstrates wood-derived materials as promising solutions for energy-efficient and sustainable glazing applications.
RESUMO
Aquilaria (A.) sinensis is a medicinal plant widely grown in tropical South China. Given the abundant pruning waste of its leaves, the use of A. sinensis leaves is valuable. In this study, goats were fed a diet containing 20% A. sinensis leaves. Compared with the basal diet, feeding A. sinensis leaves to goats did not affect growth performance but considerably reduced the feeding cost. Strikingly, feeding A. sinensis leaves resulted in a significant decrease in the blood cholesterol levels (2.11 vs. 1.49 mmol/L, p = 0.01) along with a significant increase in the high-density lipoprotein levels (1.42 vs. 1.82 mmol/L, p = 0.01). There was also a tendency to lower the content of low-density lipoprotein levels in goats (0.78 vs. 0.45 mmol/L, p = 0.09). Furthermore, metabolomics analysis demonstrated that the reduction in cholesterol levels occurred in both the serum (0.387-fold change) and muscle (0.382-fold change) of goats during A. sinensis leaf feeding. The metabolic responses to feeding A. sinensis leaves suggest that the activation of lipolysis metabolism might happen in goats. These observed changes would be conducive to improving animal health and meat quality, ultimately benefiting human health.
RESUMO
The double-sided carbonization of poplar with different sections forms a three-layer structure inspired by tree water transpiration. A photothermal evaporation comparison experiment was conducted to simulate the influence of solar radiation intensity (1 kW·m-2) on uncarbonized and single- and double-sided carbonized poplar specimens. The tissue structure, chemical functional group changes, and profile density of the specimens were analyzed using scanning electron microscopy, Fourier transform infrared spectrometry, and X-ray profile density testing, respectively. The results showed that the tissue structure of the specimen changed after treatment, and the relationship of water evaporation was shown as follows: cross-section (C) > Radial section (R) > Tangential section (T), and Double-sided carbonized poplar (DCP) > Single-sided carbonized poplar (SCP) > Non-carbonized poplar (NCP). Of these, the maximum photothermal evaporation was from the cross-section of the double-sided carbonized poplar (NCPC) with a value of 1.32 kg·m-2·h-1, which was 21.97% higher than single-sided carbonized poplar (SCPC) and 37.88% higher than non-carbonized poplar (NCPC). Based on the results, double-sided carbonization three-layer structure treatment can improve the evaporation force of the poplar interface, thereby improving the moisture migration ability of wood, and can be applied to solar interface absorber materials.
RESUMO
In this study, we aimed to develop a prediction model to assist surgeons in choosing an appropriate surgical approach for mitral valve disease patients. We retrospectively analyzed a total of 143 patients who underwent surgery for mitral valve disease. The XGBoost algorithm was used to establish a predictive model to decide a surgical approach (mitral valve repair or replacement) based on the echocardiographic features of the mitral valve apparatus, such as leaflets, the annulus, and sub-valvular structures. The results showed that the accuracy of the predictive model was 81.09% in predicting the appropriate surgical approach based on the patient's preoperative echocardiography. The result of the predictive model was superior to the traditional complexity score (81.09% vs. 75%). Additionally, the predictive model showed that the three main factors affecting the choice of surgical approach were leaflet restriction, calcification of the leaflet, and perforation or cleft of the leaflet. We developed a novel predictive model using the XGBoost algorithm based on echocardiographic features to assist surgeons in choosing an appropriate surgical approach for patients with mitral valve disease.
RESUMO
Objective: Despite the rapid development of thoracic endovascular aortic repair (TEVAR), it is still a challenge to maintain the blood flow of the branch arteries above the aortic arch in Stanford type B aortic dissection involving the left subclavian artery (LSA). The Castor stent graft is an integrated, customized, single-branch stent that enables reconstruction of the LSA. The purpose of this systematic review and meta-analysis was to assess the efficacy of the Castor stent graft for type B aortic dissection. Materials and methods: An extensive electronic literature search (PROSPERO registration number: CRD42022322146) was undertaken to identify all articles published up to August 2022 that described thoracic aortic repair with branch stents in the treatment of type B aortic dissection involving the LSA. The quality of the included studies was analyzed using the MINORS criteria. The primary outcome measures were the technical success rate, early mortality rate, endoleak rate, and 1-year survival rate. The secondary outcome measures were the stroke rate, left upper extremity ischemia rate, and target vessel patency rate. Results: Eleven studies involving 415 patients were eligible for this meta-analysis. The LSA was successfully preserved in all procedures. The technical success rate was 97.5% (95% CI: 0.953-0.991); the intraoperative endoleak rate was 0.1% (95% CI: 0.000-0.012); the intraoperative LSA patency rate was 99.52%; the intraoperative LSA stent deformation and stenosis rate was 0.15% (95% CI: 0.000-0.051); the early type I endoleak rate was 1.6% (95% CI: 0.003-0.035); the 30-day mortality rate was 0.96%; the early reintervention rate was 0.9% (95% CI: 0.000-0.040); and the perioperative stroke rate was 0% (95% CI: 0.000-0.005). The 1-year survival rate was 99.7% (95% CI: 0.976-1.000). The half-year LSA patency rate was 99.3%, the 1-year LSA patency rate was 97.58%, and the 2-year LSA patency rate was 95.23%. During the follow-up period, the leakage rate was 0.3% (95% CI: 0.000-0.017), the incidence of left upper extremity ischemia rate was 0.5% (95% CI: 0.000-0.035), and the deformation and stenosis rate of the LSA stent was 2.2% (95% CI: 0.06-0.046). Conclusion: This meta-analysis shows that endovascular repair of type B aortic dissection using the Castor stent-graft may be technically feasible and effective. However, this conclusion needs to be interpreted with caution, as the quality of evidence for all outcomes is between low and very low. Systematic review registration: [https://www.crd.york.ac.uk/prospero/], identifier [CRD42022322146].
RESUMO
In this present study, 195 cow milk, 100 goat milk, 50 buffalo milk, 50 camel milk, and 50 yak milk samples were collected in China in May and October 2016. The presence of aflatoxin M1 (AFM1) was determined using enzyme-linked immunosorbent assay method. For all cow milk samples, 128 samples (65.7%) contained AFM1 in concentrations ranging from 0.005 to 0.191 µg/L, and 6 samples (3.1%) from Sichuan province in October were contaminated with AFM1 above 0.05 µg/L (EU limit). For all goat milk samples, 76.0% of samples contained AFM1 in concentrations ranging from 0.005 to 0.135 µg/L, and 9 samples (9.0%) from Shanxi province in October were contaminated with AFM1 above 0.05 µg/L. For all buffalo milk samples, 24 samples (48.0%) contained AFM1 in concentrations ranging from 0.005 to 0.089 µg/L, and 2 samples collected in October were contaminated with AFM1 above 0.05 µg/L. Furthermore, 28.0% of samples contained AFM1 in concentrations ranging from 0.005 to 0.007 µg/L in camel milk samples, and 18.0% of samples contained AFM1 in concentrations ranging from 0.005 to 0.007 µg/L in yak milk samples. Our survey study has expanded the current knowledge of the occurrence of AFM1 in milk from five dairy species in China, in particular the minor dairy species.
Assuntos
Búfalos , Leite , Animais , Feminino , Bovinos , Leite/química , Aflatoxina M1/análise , Camelus , Cabras , China , Contaminação de Alimentos/análiseRESUMO
Herein, a facile wet-spinning strategy was used for the fabrication of mechanically strong all-chitin filaments from an aqueous NaOH solution using ß-chitin nanofibers (ß-ChNFs). It is hypothesized that to reach high mechanical performance it is important to preserve the crystalline structure of chitin during fabrication. To explore this possibility, ß-ChNFs were disintegrated from squid pens by a mild procedure and showed a uniform diameter of 10-25 nm, length of a few microns, and a high aspect ratio of more than 200. An interesting finding was that gel-like ß-ChNF filaments were directly formed in aqueous NaOH without using any organic or ionic agents. The gelation of ß-ChNFS under alkali treatments contributed to the construction of strong nanonetworks and thus facilitated the formation of high-strength filaments. The resulting all-chitin filaments showed a high tensile strength and Young's modulus of 251.3 ± 12.45 MPa and 12.1 ± 0.72 GPa, respectively, which were further investigated for utilization as flexible sensors. The advantages of this strategy included the lack of use of any toxic solvents and the achievement of high mechanical performance for the all-chitin filaments. We believe that this wet-spinning approach may promote the functional utilization of chitin to develop high-strength filaments in smart textiles, biosensors, and structural reinforcements.
Assuntos
Quitina , Nanofibras , Animais , Quitina/química , Nanofibras/química , Hidróxido de Sódio , Resistência à Tração , Decapodiformes/química , ÁguaRESUMO
Renewable and biodegradable natural polymeric materials are attractive candidates for replacing nonbiodegradable plastics. However, it is challenging to fabricate polysaccharide-based materials (such as cellulose and chitin) that can be used in humid or even watery environments due to their inferior stability against water. Here, a self-locking structure is constructed to develop a strong, water-resistant, and ionic conductive all-chitosan film without other additives. The densely packed self-locking structure introduces strong interactions between chitosan nanofibers, preventing the fibers from disentangling even in watery environments. The resulting film exhibits outstanding tensile strength of â¼144 MPa, superior wet strength of â¼54.3 MPa, and high ionic conductivity of 0.0012 S/cm at 10-4 M KCl, which are significantly higher than those of conventional polysaccharide-based materials and many commercially used plastics. Additionally, it also possesses outstanding flexibility, excellent thermal stability, good antimicrobial ability, and biodegradability, which make it a promising eco-friendly alternative to plastics for many potential applications, such as packaging bags, drinking straws, and ion regulation membranes.
RESUMO
We investigate the mechanism of binding of dopamine-conjugated carboxymethyl cellulose (DA-CMC) with carbon nanotubes (CNTs) and the strain-induced interfacial strengthening that takes place upon wet drawing and stretching filaments produced by wet-spinning. The filaments are known for their tensile strength (as high as 972 MPa and Young modulus of 84 GPa) and electrical conductivity (241 S cm-1). The role of axial orientation in the development of interfacial interactions and structural changes, enabling shear load bearing, is studied by molecular dynamics simulation, which further reveals the elasto-plasticity of the system. We propose that the reversible torsion of vicinal molecules and DA-CMC wrapping around CNTs are the main contributions to the interfacial strengthening of the filaments. Such effects play important roles in impacting the properties of filaments, including those related to electrothermal heating and sensing. Our findings contribute to a better understanding of high aspect nanoparticle assembly and alignment to achieve high-performance filaments.
RESUMO
The purpose of this research is to develop strong and tough wood-based hydrogels, which are reinforced by an aligned cellulosic wood skeleton. The hypothesis is that improved interfacial interaction between the wood cell wall and a polymer is of great importance for improving the mechanical performance. To this end, a facile and green approach, called ultraviolet (UV) grafting, was performed on the polyacrylamide (PAM)-infiltrated wood skeleton without using initiators. An important finding was that PAM-grafted cellulose nanofiber (CNF) architectures formed in the obtained hydrogels under UV irradiation, where CNFs themselves serve as both initiators and cross-linkers. Moreover, an alkali swelling treatment was utilized to improve the accessibility of the wood cell wall before UV irradiation and thus facilitate grafting efficiency. The resulting alkali-treated Wood-g-PAM hydrogels exhibited significantly higher tensile properties than those of the Wood/PAM hydrogel and were further assembled into conductive devices for sensor applications. We believe that this UV grafting strategy may facilitate the development of strong wood-based composites with interesting features.
Assuntos
Hidrogéis , Nanofibras , Celulose , Condutividade Elétrica , MadeiraRESUMO
Thermal treatments of milk induce changes in the properties of milk whey proteins. The aim of this study was to investigate the specific changes related to nutrients in the whey proteins of dairy cow milk after pasteurization at 85 °C for 15 s or ultra-high temperature (UHT) at 135 °C for 15 s. A total of 223 whey proteins were confidently identified and quantified by TMT-based global discovery proteomics in this study. We found that UHT thermal treatment resulted in an increased abundance of 17 proteins, which appeared to show heat insensitivity. In contrast, 15 heat-sensitive proteins were decreased in abundance after UHT thermal treatment. Some of the heat-sensitive proteins were connected with the biological immune functionality, suggesting that UHT thermal treatment results in a partial loss of immune function in the whey proteins of dairy cow milk. The information reported here will considerably expand our knowledge about the degree of heat sensitivity in the whey proteins of dairy cow milk in response to different thermal treatments and offer a knowledge-based reference to aid in choosing dairy products. It is worth noting that the whey proteins (lactoperoxidase and lactoperoxidase) in milk that were significantly decreased by high heat treatment in a previous study (142 °C) showed no significant difference in the present study (135 °C). These results may imply that an appropriately reduced heating intensity of UHT retains the immunoactive proteins to the maximum extent possible.
Assuntos
Leite/química , Pasteurização/métodos , Proteínas do Soro do Leite/química , Soro do Leite/química , Animais , Feminino , Temperatura Alta , Leite/imunologia , Anotação de Sequência Molecular , Estabilidade Proteica , Proteômica/métodos , Soro do Leite/imunologia , Proteínas do Soro do Leite/classificação , Proteínas do Soro do Leite/imunologia , Proteínas do Soro do Leite/isolamento & purificaçãoRESUMO
Milk is considered a perfect natural food for humans and animals. However, aflatoxin B1 (AFB1) contaminating the feeds fed to lactating dairy cows can introduce aflatoxin M1 (AFM1), the main toxic metabolite of aflatoxins into the milk, consequently posing a risk to human health. As a result of AFM1 monitoring in raw milk worldwide, it is evident that high AFM1 concentrations exist in raw milk in many countries. Thus, the incidence of AFM1 in milk from dairy cows should not be underestimated. To further optimize the intervention strategies, it is necessary to better understand the metabolism of AFB1 and its biotransformation into AFM1 and the specific secretion pathways in lactating dairy cows. The metabolism of AFB1 and its biotransformation into AFM1 in lactating dairy cows are drawn in this review. Furthermore, recent data provide evidence that in the mammary tissue of lactating dairy cows, aflatoxins significantly increase the activity of a protein, ATP-binding cassette super-family G member 2 (ABCG2), an efflux transporter known to facilitate the excretion of various xenobiotics and veterinary drugs into milk. Further research should focus on identifying and understanding the factors that affect the expression of ABCG2 in the mammary gland of cows.
RESUMO
BACKGROUD: The 5'-3' exoribonuclease 2 (XRN2) has been reported involved in several tumors. However, the clinical significance and molecular mechanism of XRN2 in oral squamous cell carcinoma (OSCC) have not been elucidated. MATERIALS AND METHODS: Immunohistochemistry (IHC) was used to investigate the expression of XRN2 in OSCC and adjacent noncancerous tissues, which was further identified by western blot and GEPIA2 database analysis. Moreover, the relationship between XRN2 expression and the clinicopathological characteristics and prognosis of OSCC patients was evaluated. In addition, in vitro, the effects of XRN2 on OSCC cells were evaluated by Cell Counting Kit-8 (CCK8) assay, colony formation assay, apoptosis assay, wound healing assay, and transwell assays. RESULTS: XRN2 was overexpressed in 44 of 77 (57.1 %) OSCC tissues. High expression of XRN2 was significantly associated with tumor differentiation (P=0.003), pathological clinical stage (P=0.045), lymph node metastasis (P=0.041), and poor overall survival (P=0.0013). Furthermore, the multivariate analysis suggested that XRN2 expression(P=0.002) was determined as an independent prognostic factor for patients with OSCC. Additionally, with functional assays in vitro, we found that downregulation of XRN2 inhibited cell proliferation, migration, and invasion, while promoted apoptosis of OSCC cells. Furthermore, knockdown of XRN2 in OSCC cells could increase the expression of E-cadherin but reduce the expression of Vimentin, which changes the characteristic of epithelial-mesenchymal transition (EMT). CONCLUSION: XRN2 is significantly overexpressed in OSCC tissues and its upregulation was closely associated with poor prognosis of OSCC patients. XRN2 could be a useful prognostic biomarker and a potential therapeutic target for OSCC.