Visible Light Locking in Mineral-Based Composite Phase Change Materials Enabling High Photothermal Conversion and Storage.

Fully stimulating the capacity of light-driven phase change materials (PCMs) for efficient capture, conversion, and storage solar energy requires an ingenious combination of PCMs, supporting structural materials, and photothermal materials, therefore motivating the synergistic effects between the components. Herein, this work thoroughly explores the interaction forces between PCMs and supporting structural materials and the synergy between PCMs and photothermal materials in photothermal conversion. Rejoicingly, when capitalizing on the prepared directional channel structure of hierarchically porous composite aerogel (PEPG) as a supporting structural material, a superior paraffin wax (PW) encapsulation rate of 85.11% is achieved, and the prepared PEPG2-PW has a high phase change enthalpy of 182.9 J/g. The van der Waals force and Lewis acid-base action between PEPG and PW molecules reveal the excellent stabilities of PEPG-PW. More importantly, the PEPG2-PW has an ultrahigh photothermal conversion efficiency of 95.2% under 1 sun irradiation and durability. Most importantly, the COMSOL Multiphysics software calculations demonstrate that transparent PW can anchor sunlight on the surface of graphite nanoplates, converting it into heat by enhancing the loss of graphite backbone lattice vibrations, and the accumulated heat is then stored in molten PW. This work provides some design principles for high-efficiency solar-thermal conversion materials.

Functionally constructed magnetic-dielectric mineral microspheres for efficient thermal energy storage and microwave absorption.

Electromagnetic interference (EMI) and equipment heat dissipation problems are becoming increasingly prominent in advanced applications such as modern wireless communications, driverless cars, and portable devices. Multifunctional composites with efficient energy storage, conversion, and microwave absorption are urgently needed. We reported an effective strategy to construct attapulgite (ATP), carbon nanotubes (CNT), and NiCo alloys composite mineral microspheres (ACNC). Urchin-like TiO2 was coated on the surface of ACNC to form composite microspheres (ACNCT), which was compounded with paraffin (P-ACNCT) to prepare thermal energy storage and microwave absorption integrated material. The urchin-like TiO2 morphology possesses unique advantages in encapsulating paraffin. The results show that the melting and solidification enthalpy of the P-ACNCT reaches 111.6 J/g and 108.1 J/g, respectively, which indicates excellent thermal energy storage capacity. Combining a dielectric TiO2 shell with a magnetic composite microsphere core can produce a core-shell microsphere mechanism that allows for adjustable reflection loss and promotes impedance matching. The effective microwave absorption bandwidth of P-ACNCT can reach 5.76 GHz when the thickness is only 1.6 mm in the 2-18 GHz range. P-ACNCT is significant for synchronous microwave absorption and thermal energy regulation of advanced electronic equipment.

Multiple interface coupling in ultrathin Mn-based composites for superior catalytic oxidation: Implications of interface coupling on structural defects.

Manganese oxide has been recognized as one of the most promising gaseous heterogeneous catalysts due to its low cost, environmental friendliness, and high catalytic oxidation performance. The modulation of the interfacial coupling effect of manganese oxides by chemical means is considered a critical and effective way to improve the catalytic performance. Herein, a novel one-step synthetic strategy of highly-efficient ultrathin manganese-based catalysts is proposed through optimal regulation of metal/manganese oxide multi-interfacial coupling. Carbon monoxide (CO) and propane (C3H8) oxidation are employed as probe reactions to investigate the structure-catalytic mechanism - catalytic performance relationship. The ultrathin manganese (Mn)-based catalyst exhibits superior low-temperature catalytic activity with a 90% conversion of CO/C3H8 realized at 106℃ and 350℃. Subsequently, the effect of "interfacial effect" on the intrinsic properties of manganese oxides is revealed. The ultrathin appearance of two-dimensional (2D) manganese dioxide (MnO2) nanosheets changes the binding force in the vertical direction, thus resulting in an increase in the average manganese-oxygen (Mn-O) bond length and exposing more surface defects. Besides, the introduction of Copper (Cu) species into the catalyst further weakens the Mn-O bond and promotes the generation of oxygen vacancies, which subsequently enhances the oxygen migration rate. This study provides new insights into the optimal design of transition metal oxide interfacial assemblies for efficient catalytic reactions.

Automatic three-dimensional measurement of large-scale structure based on vision metrology.

All relevant key techniques involved in photogrammetric vision metrology for fully automatic 3D measurement of large-scale structure are studied. A new kind of coded target consisting of circular retroreflective discs is designed, and corresponding detection and recognition algorithms based on blob detection and clustering are presented. Then a three-stage strategy starting with view clustering is proposed to achieve automatic network orientation. As for matching of noncoded targets, the concept of matching path is proposed, and matches for each noncoded target are found by determination of the optimal matching path, based on a novel voting strategy, among all possible ones. Experiments on a fixed keel of airship have been conducted to verify the effectiveness and measuring accuracy of the proposed methods.