Fabrication and optimization of bioelectrochemical system using tetracycline-degrading bacterial strains for antibiotic wastewater treatment.

In this study, a microbial fuel cell was constructed using Raoultella sp. XY-1 to efficiently degrade tetracycline (TC) and assess the effectiveness of the electrochemical system. The degradation rate reached 83.2 ± 1.8 % during the 7-day period, in which the system contained 30 mg/L TC, and the degradation pathway and intermediates were identified. Low concentrations of TC enhanced anodic biofilm power production, while high concentrations of TC decreased the electrochemical activity of the biofilm, extracellular polymeric substances, and enzymatic activities associated with electron transfer. Introducing electrogenic bacteria improved power generation efficiency. A three-strain hybrid system was fabricated using Castellaniella sp. A3, Castellaniella sp. A5 and Raoultella sp. XY-1, leading to the enhanced TC degradation rate of 90.4 % and the increased maximum output voltage from 200 to 265 mV. This study presents a strategy utilizing tetracycline-degrading bacteria as bioanodes for TC removal, while incorporating electrogenic bacteria to enhance electricity generation.

Efficient removal of Sb(III) from wastewater using selenium nanoparticles synthesized by Psidium guajava plant extract.

Antimony (Sb) pollution in aquatic ecosystems has emerged as a critical environmental issue on a global scale, emphasizing the urgent need for cost-effective and user-friendly technologies to remove Sb compounds from water sources. In this study, a novel adsorbent, selenium nanoparticles (SeNPs), was synthesized using the aqueous extract of Psidium guajava L. leaves (AEP) for the purpose of eliminating Sb(III) from aqueous solutions. The biosynthesized SeNPs was characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray fluorescence spectrometer (XRF), Fourier Transform-Infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis techniques. Additionally, the removal efficiency of the SeNPs for Sb(III) was systematic investigated under the effects of SeNPs dose, temperature, pH and re-usability. The results of this study showed that the adsorption data fitted well into pseudo-second order model, while the Sips modeling demonstrated a high adsorption capacity (62.7 mg/g) of SeNPs for Sb(III) ions at 303.15 K from aqueous solution. The exothermic enthalpy change of - 22.59 kJ/mol and negative Gibbs free energy change assured the viability of the adsorption process under the considered temperature conditions. Surface functional groups on SeNPs like carboxyl, amide, hydroxyl, carbonyl, and methylene significantly facilitate the adsorption processes. Furthermore, the removal efficiencies of Sb in the two actual Sb mine wastewater samples were remarkably high, achieving nearly to 100% with 1.5 g/L SeNPs within 48 h. This outcome underscores the potential of SeNPs as a highly promising solution for efficiently remediating Sb from aquatic environments, owing to their cost-effectiveness, ease of regeneration, and rapid uptake capabilities.

Biosynthetic selenium nanoparticles (Bio-SeNPs) mitigate the toxicity of antimony (Sb) in rice (Oryza sativa L.) by limiting Sb uptake, improving antioxidant defense system and regulating stress-related gene expression.

Nanotechnology offers a promising and innovative approach to mitigate biotic and abiotic stress in crop production. In this study, the beneficial role and potential detoxification mechanism of biogenic selenium nanoparticles (Bio-SeNPs) prepared from Psidium guajava extracts in alleviating antimony (Sb) toxicity in rice seedlings (Oryza sativa L.) were investigated. The results revealed that exogenous addition of Bio-SeNPs (0.05 g/L) into the hydroponic-cultured system led to a substantial enhancement in rice shoot height (73.3%), shoot fresh weight (38.7%) and dry weight (28.8%) under 50 µM Sb(III) stress conditions. Compared to Sb exposure alone, hydroponic application of Bio-SeNPs also greatly promoted rice photosynthesis, improved cell viability and membrane integrity, reduced reactive oxygen species (ROS) levels, and increased antioxidant activities. Meanwhile, exogenous Bio-SeNPs application significantly lowered the Sb accumulation in rice roots (77.1%) and shoots (35.1%), and reduced its root to shoot translocation (55.3%). Additionally, Bio-SeNPs addition were found to modulate the subcellular distribution of Sb and the expression of genes associated with Sb detoxification in rice, such as OsCuZnSOD2, OsCATA, OsGSH1, OsABCC1, and OsWAK11. Overall, our findings highlight the great potential of Bio-SeNPs as a promising alternative for reducing Sb accumulation in crop plants and boosting crop production under Sb stress conditions.

Exploration of the Vermiculite-Induced Bacterial Community and Co-Network Successions during Sludge-Waste Mushroom Co-Composting.

Vermiculite is a clay mineral with unique physical properties that plays a significant role in plant cultivation, soil remediation, and solid waste management. In this research, we first explored how vermiculite-to-microbe interactions evolved during sludge-waste mushroom residue co-composting. Vermiculite's addition had a substantial impact on the microbial α and ß diversities, significantly changed the microbial community pattern, and strengthened the composting nutrient circulation through the formation of more specialist and generalist species. The microbial community characteristics exhibited common co-networks for resisting composting environment stresses. Vermiculite contributed to enhancing the keystone taxa Proteobacteria and Actinobacteriota and caused the ecological function network to diversify in the warming and maturation phases, with more complexity and tightness in the thermophilic phase (with super-generalist species existing). The enhanced microbial interactions induced by vermiculite possessed a greater capacity to facilitate the metabolisms of carbohydrates and amino acids and cellulolysis, thereby promoting composting humification, and nitrogen retention in the final compost and composting maturity. These findings are helpful for us to understand the biological process mechanisms of the effect of vermiculite additives on composting and contribute to the establishment of a theoretical framework for enhancing the microbial interactions in composting systems by adding vermiculite in practical applications.

The role of an Sb-oxidizing bacterium in modulating antimony speciation and iron plaque formation to reduce the accumulation and toxicity of Sb in rice (Oryza sativa L.).

Microbial antimony (Sb) oxidation in the root rhizosphere and the formation of iron plaque (IP) on the root surface are considered as two separate strategies to mitigate Sb(III) phytotoxicity. Here, the effect of an Sb-oxidizing bacterium Bacillus sp. S3 on IP characteristics of rice exposed to Sb(III) and its alleviating effects on plant growth were investigated. The results revealed that Fe(II) supply promoted IP formation under Sb(III) stress. However, the formed IP facilitated rather than hindered the uptake of Sb by rice roots. In contrast, the combined application of Fe(II) and Bacillus sp. S3 effectively alleviated Sb(III) toxicity in rice, resulting in improved rice growth and photosynthesis, reduced oxidative stress levels, enhanced antioxidant systems, and restricted Sb uptake and translocation. Despite the ability of Bacillus sp. S3 to oxidize Fe(II), bacterial inoculation inhibited the formation of IP, resulting in a reduction in Sb absorption on IP and uptake into the roots. Additionally, the bacterial inoculum enhanced the transformation of Sb(III) to less toxic Sb(V) in the culture solution, further influencing the adsorption of Sb onto IP. These findings highlight the potential of combining microbial Sb oxidation and IP as an effective strategy for minimizing Sb toxicity in sustainable rice production systems.

Efficient reduction of Cr(VI) by guava (Psidium guajava) leaf extract and its mitigation effect on Cr toxicity in rice seedlings.

Hexavalent chromium (Cr(VI)) is a toxic element that has negative impacts on crop growth and yield. Using plant extracts to convert toxic Cr(VI) into less toxic Cr(III) may be a more favorable option compared to chemical reducing agents. In this study, the potential effects and mechanisms of using an aqueous extract of Psidium guajava L. leaves (AEP) in reducing Cr(VI) toxicity in rice were comprehensively studied. Firstly, the reducing power of AEP for Cr(VI) was confirmed by the cyclic voltammetry combined with X-ray photoelectron spectroscopy (XPS) assays. The highest Cr(VI) reduction efficiency reached approximately 78% under 1.5 mg gallic acid equivalent (GAE)/mL of AEP and 10 mg/L Cr(VI) condition. Additionally, Cr(VI) stress had a significant inhibitory effect on rice growth. However, the exogenous application of AEP alleviated the growth inhibition and oxidative damage of rice under Cr(VI) stress by increasing the activity and level of enzymatic and non-enzymatic antioxidants. Furthermore, the addition of AEP restored the ultrastructure of root cells, promoted Cr adsorption onto root cell walls, and limited the translocation Cr to shoots. In shoots, AEP application also triggered the expression of specific genes involved in Cr defense and detoxification response, including photosynthesis pathways, antioxidant systems, flavonoids biosynthesis, and plant hormone signal transduction. These results suggest that AEP is an efficient reduction agent for Cr(VI), and exogenous application of AEP may be a promising strategy to mitigate the harm of Cr(VI) on rice, ultimately contributing to improved crop yield in Cr-contaminated environments.

Extracellular proteins enhance Cupriavidus pauculus nickel tolerance and cell aggregate formation.

Heavy metal-resistant bacteria secrete extracellular proteins (e-PNs). However, the role of e-PNs in heavy metal resistance remains elusive. Here Fourier Transform Infrared Spectroscopy implied that N-H, C = O and NH2-R played a crucial role in the adsorption and resistance of Ni2+ in the model organism Cuprividus pauculus 1490 (C. pauculus). Proteinase K treatment reduced Ni2+ resistance of C. pauculus underlining the essential role of e-PNs. Further three-dimension excitation-emission matrix fluorescence spectroscopy analysis demonstrated that tryptophan proteins as part of the e-PNs increased significantly with Ni2+ treatment. Proteomic and quantitative real-time polymerase chain reaction data indicated that major changes were induced in the metabolism of C. pauculus in response to Ni2+. Among those lipopolysaccharide biosynthesis, general secretion pathways, Ni2+-affiliated transporters and multidrug efflux play an essential role in Ni2+ resistance. Altogether the results provide a conceptual model for comprehending how e-PNs contribute to bacterial resistance and adsorption of Ni2+.

Selenium bio-nanocomposite based on extracellular polymeric substances (EPS): Synthesis, characterization and application in alleviating cadmium toxicity in rice (Oryza sativa L.).

Selenium nanoparticles (SeNPs) have gained significant attention owing to their favorable bioavailability and low toxicity, making them widely applications in the fields of medicine, food and agriculture. In this study, bacterial extracellular polymeric substances (EPS) were used as a novel stabilizer and capping agent to prepare dispersed SeNPs. Results show that EPS-SeNPs presented negative potential (-38 mV), spherical morphologies with average particle size about 100-200 nm and kept stable at room temperature for a long time. X-ray diffraction (XRD) analysis demonstrated that the synthesized nanoparticles were pure amorphous nanoparticles, and X-ray photoelectron spectroscopy (XPS) spectrum showed a spike at 55.6 eV, indicating the presence of zero-valent nano­selenium. Fourier-transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy analysis confirmed proteins and polysaccharides in EPS played a crucial role in the synthesis of EPS-SeNPs. Compared to EPS or sodium selenite (Na2SeO3), EPS-SeNPs showed a relatively moderate result in terms of scavenging free radicals in vitro. In contrast, EPS-SeNPs demonstrated lower toxicity to rice seeds than Na2SeO3. Notably, the exogenous application of EPS-SeNPs effectively alleviated the growth inhibition and oxidative damaged caused by cadmium (Cd), and significantly reduced Cd accumulation in rice plants.

The alleviating effects and underlying mechanisms of exogenous selenium on both Sb(III) and Sb(V) toxicity in rice seedlings (Oryza sativa L.).

Selenium (Se) has been used to detoxify various heavy metals in plants. However, the effects and underlying mechanisms of exogenous Se application on the toxicity of antimonite [Sb(III)] and antimonate [Sb(V)] in crops are still poorly understood. Therefore, the potential alleviating roles of Se on the plant growth, antioxidant system, uptake and subcellular distribution of Sb, and expression of Sb-related genes were comprehensively investigated in rice seedlings (Oryza sativa L.) under both Sb(III) and Sb(V) stress conditions. The results showed that high concentrations of Sb(III) (100 µM) and Sb(V) (300 µM) caused a significant decrease in plant growth parameters, photosynthetic pigments and relative water content in rice seedlings. In contrast, the addition of Se (20 or 2 µM) improved rice growth, decreased Sb accumulation, and reduced oxidative stress in rice seedlings when exposed to 100 µM Sb(III) and 300 µM Sb(V), respectively. Furthermore, Se application could effectively improve the physiological adaptability of rice seedlings under Sb(III) and Sb(V) stress by regulating enzymatic and non-enzymatic antioxidant systems, Sb subcellular distribution and transcription levels of Sb-related genes, including in antioxidant response (OsCuZnSOD2, OsCATA and OsGSH1), detoxification (OsPCS1, OsPCS2 and OsABCC1) and Sb transport and sequestration (OsLsi1 and OsWAK11). Moreover, we also discovered that the mitigation effect of Se was dose-dependent and depended on Sb valence states. Thus, these findings contribute to our understanding of the mechanisms underlying Se-Sb antagonism in rice, offering a potentially useful method for producing both safe and Se-rich crops.

Microbial extracellular polymeric substances alleviate cadmium toxicity in rice (Oryza sativa L.) by regulating cadmium uptake, subcellular distribution and triggering the expression of stress-related genes.

Cadmium (Cd) accumulation in crops causes potential risks to human health. Microbial extracellular polymeric substances (EPS) are a complex mixture of biopolymers that can bind various heavy metals. The present work examined the alleviating effects of EPS on Cd toxicity in rice and its detoxification mechanism. The 100 µM Cd stress hampered the overall plant growth and development, damaged the ultrastructures of both leaf and root cells, and caused severe lipid peroxidation in rice plants. However, applying EPS at a concentration of 100 mg/L during Cd stress resulted in increased biomass, reduced Cd accumulation and transport, and minimized the oxidative damage. EPS application also enhanced Cd retention in the shoot cell walls and root vacuoles, and actively altered the expression of genes involved in cell wall formation, antioxidant defense systems, transcription factors, and hormone metabolism. These findings provide new insights into EPS-mediated mitigation of Cd stress in plants and help us to develop strategies to improve crop yield in Cd-contaminated soils in the future.

Evaluation of fungal community assembly and function during food waste composting with Aneurinibacillus sp. LD3 inoculant.

The objective of this work was to evaluate the fungal community assembly and function during food waste composting with Aneurinibacillus sp. LD3 (LD3) inoculant. Inoculation reduced the content of total organic carbon, moisture content, nitrate nitrogen, and nitrite nitrogen. The LD3 inoculant was able to drive the changes in the assembly of the fungal community. In particular, inoculation with LD3 not only increased the relative abundance of Ascomycota and Trichocomaceae_unclassified for lignocellulose degradation at the mesophilic and cooling stages but also reduced the relative abundances of the opportunistic human pathogen Candida. Saprotroph was the predominant fungal trophic mode in composting, and inoculation with LD3 has a better inactivation effect on animal and plant pathogenic fungi during composting. Furthermore, the variation of the fungal community after inoculation with LD3 was the largest explained by temperature (30.64%). These results implied that LD3 significantly regulated fungal composition and function of food waste composting.

Exploring the dynamic of microbial community and metabolic function in food waste composting amended with traditional Chinese medicine residues.

The aim of this study was to explore the dynamic of microbial community and metabolic function in food waste composting amended with traditional Chinese medicine residues (TCMRs). Results suggested that TCMRs addition at up to 10% leads to a higher peak temperature (60.5 °C), germination index (GI) value (119.26%), and a greater reduction in total organic carbon (TOC) content (8.08%). 10% TCMRs significantly induced the fluctuation of bacterial community composition, as well as the fungal community in the thermophilic phase. The addition of 10% TCMRs enhanced the abundance of bacterial genera such as Acetobacter, Bacillus, and Brevundimonas, as well as fungal genera such as Chaetomium, Thermascus, and Coprinopsis, which accelerated lignocellulose degradation and humification degree. Conversely, the growth of Lactobacillus and Pseudomonas was inhibited by 10% TCMRs to weaken the acidic environment and reduce nitrogen loss. Metabolic function analysis revealed that 10% TCMRs promoted the metabolism of carbohydrate and amino acid, especially citrate cycle, glycolysis/gluconeogenesis, and cysteine and methionine metabolism. Redundancy analysis showed that the carbon to nitrogen (C/N) ratio was the most significant environmental factor influencing the dynamic of bacterial and fungal communities.

Isolation and characterization of a novel thermotolerant alkali lignin-degrading bacterium Aneurinibacillus sp. LD3 and its application in food waste composting.

The aim of this study was to isolate thermotolerant alkali lignin-degrading bacteria and to investigate their degradation characteristics and application in food waste composting. Two thermotolerant alkali lignin-degrading bacteria isolates were identified as Bacillus sp. LD2 (LD2) and a novel species Aneurinibacillus sp. LD3 (LD3). Compared with strain LD2, LD3 had a higher alkali lignin degradation rate (61.28%) and ligninolytic enzyme activities, and the maximum lignin peroxidase, laccase, and manganese peroxidase activities were 3117.25, 1484.5, and 1770.75 U L-1, respectively. GC-MS analysis revealed that low-molecular-weight compounds such as 4'-hydroxy-3'-methoxy acetophenone, vanillic acid, 1-(4-hydroxy-3,5-dimethoxyphenyl), benzoic acid, and octadecanoic acid were formed in the degradation of alkali lignin by LD3, indicating the cleavage of ß-aryl ether, Cα-Cß bonds, and aromatic rings in lignin. Composting results showed that inoculating LD3 improved the degradation of organic matter by 20.11% and reduced the carbon-to-nitrogen (C/N) ratio (15.66). Additionally, a higher decrease in the content of lignocellulose was observed in the LD treatment. FTIR and 3D-EEM spectra analysis indicated that inoculating LD3 promoted the decomposition of easily available organic substances and lignocellulose and the formation of aromatic structures and humic acid-like substances. In brief, the thermotolerant lignin-degrading bacterium Aneurinibacillus sp. LD3 is effective in degrading lignin and improving the quality of composting.

Effect of nickel (II) on the performance of anodic electroactive biofilms in bioelectrochemical systems.

The impact of nickel (Ni2+) on the performance of anodic electroactive biofilms (EABs) in the bioelectrochemical system (BES) was investigated in this study. Although it has been reported that Ni2+ influences microorganisms in a number of ways, it is unknown how its presence in the anode of a BES affects extracellular electron transfer (EET) of EABs, microbial viability, and the bacterial community. Results revealed that the addition of Ni2+ decreased power output from 673.24 ± 12.40 mW/m2 at 0 mg/L to 179.26 ± 9.05 mW/m2 at 80 mg/L. The metal and chemical oxygen demand removal efficiencies of the microbial fuel cells (MFCs) declined as Ni2+ concentration increased, which could be attributed to decreased microbial viability as revealed by SEM and CLSM. FTIR analysis revealed the involvement of various microbial biofilm functional groups, including hydroxyl, amides, methyl, amine, and carboxyl, in the uptake of Ni2+. The presence of Ni2+ on the anodic biofilms was confirmed by SEM-EDS and XPS analyses. CV demonstrated that the electron transfer performance of the anodic biofilms was negatively correlated with the various Ni2+ concentrations. EIS showed that the internal resistance of the MFCs increased with increasing Ni2+ concentration, resulting in a decrease in power output. High-throughput sequencing results revealed a decrease in Geobacter and an increase in Desulfovibrio in response to Ni2+ concentrations of 10, 20, 40, and 80 mg/L. Furthermore, the various Ni2+ concentrations decreased the expression of EET-related genes. The Ni2+-fed MFCs had a higher abundance of the nikR gene than the control group, which was important for Ni2+ resistance. This work advances our understanding of Ni2+ inhibition on EABs, as well as the concurrent removal of organic matter and Ni2+ from wastewater.

Insight into the microbial mechanisms for the improvement of composting efficiency driven by Aneurinibacillus sp. LD3.

This work explored the microbial mechanisms for the improvement of composting efficiency driven by thermotolerant lignin-degrading bacterium Aneurinibacillus sp. LD3 (LD3). Results showed that LD3 inoculant prolonged the thermophilic period by 4 days, improved the final content of humic acid, total phosphorus (TP), nitrogen, potassium and seed germination index. Inoculating LD3 enhanced the relative abundance of thermotolerant and phosphate-solubilizing microbes including the phyla of Proteobacteria, Bacteroidota, Firmicutes, and Actinobacteriota, and the genus of Bacillus, Thermoactinomyces, and Pseudomonas. Metabolic function analysis showed that sequences involved in carbohydrate and amino acid metabolism were boosted, while sequences associated with human disease were reduced after inoculating LD3. Spearman correlation analysis revealed that Aneurinibacillus has a significant positive correlation with temperature, TP, Bacillus, and Thermoactinomyces. This study provides useful information for understanding the microbial mechanisms of LD3 promoting composting efficiency, and reveals the tremendous potential of LD3 in the resource utilization of organic solid wastes.

Expression, purification, characterization and direct electrochemistry of two HiPIPs from Acidithiobacillus caldus SM-1.

High-potential iron-sulfur proteins (HiPIPs) from extremely acidophilic chemolithotrophic non-photosynthetic Acidithiobacillus commonly play a crucial role in ferrous or sulfurous biooxidation. Acidithiobacillus exhibit important industrial applications for bioleaching valuable metals from sulfide ores. In this study, two HiPIP genes from thermophilic Acidithiobacillus caldus SM-1 were cloned and successfully expressed, and their proteins were purified. The proteins displayed a brownish color with an optical absorbance peak at approximately 385 nm and an electronic paramagnetic resonance (EPR) g value of approximately 2.01, which confirmed that the iron-sulfur cluster was correctly inserted into the active site when the proteins were generated in E. coli. The proteins were more thermostable than HiPIPs from mesophilic Acidithiobacillus. The direct electron transfer (DET) between HiPIPs and electrode was achieved by the 2-mercaptopyrimidine (MP) surface-modified gold electrodes; the redox potentials of the HiPIP1 and HiPIP2 measured by cyclic voltammetry were approximately 304.5 mV and 400.5 mV, respectively. The electron transfer rate constant was estimated to be 0.75 s-1 and 0.66 s-1, respectively. The MP/Au electrode and Au electrode showed consistent differences in heterogeneous electron transfer rates and electron transfer resistances. Bioinformatics and molecular simulations further explained the direct electron transfer between the proteins and surface-modified electrode.

Adsorption characteristics of Cr(VI) on microalgae immobilized by different carriers.

To solve the problem of harvesting microalgae during heavy metal adsorption, six different carriers were selected in this study to compare the adsorption behavior of microalgae after immobilization. The results of the scanning electron microscope (SEM) and adsorption showed chitosan as a carrier showed the best immobilization effect and adsorption advantages after immobilizing microalgae. The optimal immobilized carrier-chitosan was obtained under the following conditions of chitosan: acetic acid (2:40), microalgae concentration (108 cells mL-1), and immobilization time (18 h). The optimal adsorption conditions were as follows: temperature: 30 °C, pH: 7.0, adsorption dose: 1.5 g L-1, initial ion concentration: 40 mg L-1. The adsorption capacity of metal ions can reach 37.1 mg g-1 Cr(VI), 25.98 mg g-1 Cu(II), 25.06 mg g-1 Pb(II), and 24.62 mg g-1 Cd(II), respectively. The desorption efficiency in 0.5 mol L-1 NaOH desorption solution reached 90.01%. After five adsorption-desorption cycles, excluding chitosan (∼70%), the adsorption efficiency of other adsorbents decreased with an increase in the recycling times. Chitosan was a suitable carrier for the immobilization of Synechocystis sp. PCC6803. Fourier transform infrared spectroscopy and Raman spectra analysis showed that groups belonging to the microalgae were detected after the microalgae in different carriers, indicating that the microalgae were immobilized with the carriers. At the same time, the energy spectrum changed before and after adsorption indicated the specific functional groups of microalgae played an important role in the adsorption process. The kinetic and isothermal model data showed that the adsorption process was mainly chemical adsorption and homogeneous monolayer adsorption. Moreover, X-ray diffraction showed the interlayer peak strength decreased significantly, indicating that the interlayer structure was stretched after Cr(VI) ion exchange. X-ray photoelectron spectroscopy analysis showed that the Cr adsorption process involves the reduction of Cr(VI) to Cr(III).

The application of immobilization technology in various aspects of microalgae has attracted the attention of researchers. At present, the research report mainly focuses on the parameter optimization of microalgae immobilized by the carrier, but there are few reports on the comparison of different carriers for microalgae immobilization and the study on the adsorption mechanism of heavy metals by the optimal carrier for microalgae immobilization. In this study, six different carriers were selected to compare the effects of microalgae immobilization, and the optimal carrier was obtained. To further explore the optimal synthesis parameters of the suitable carrier, the optimal adsorption parameters for heavy metals, desorption efficiency, and recycling effect, explore the adsorption mechanism, and provide a feasible basis and theoretical guidance for the extensive application of microalgae immobilization technology in the industry.

Impact of bamboo sphere amendment on composting performance and microbial community succession in food waste composting.

The purpose of this study was to find an economical and effective amendment for improving composting performance and product quality, as well as to analyze the microbial community succession in the whole phase of composting. Therefore, the effect of reusable amendment bamboo sphere on composting performance and microbial community succession during food waste composting was investigated. The results showed that 6% bamboo sphere treatment had the highest degree of polymerization (3.7) and humification index (0.18). Compared with control, 6% bamboo sphere amendment increased total nitrogen (TN), phosphorus (TP) and potassium (TK) contents by 13.61%, 19% and 17.42%, respectively. Furthermore, bamboo sphere enhanced bacterial-fungal diversity and improved microbial community composition by enhancing the relative abundance of thermo-tolerance and lignocellulolytic bacteria and fungi. The five most abundant genera in bamboo sphere composting comprised Bacillus (0-71.47%), Chloroplast-norank (0-47.17%), Pusillimonas (0-33.24%), Acinetobacter (0-27.98%) and unclassified Sphingobacteriaceae (0-22.62%). Linear discriminant analysis effect size showed that Firmicutes, Thermoascaceae and Actinobacteriota, which have a relationship with the decomposition of soluble organic matter and lignocellulose, were significantly enriched in bamboo sphere treatment. Canonical correspondence analysis illustrated that total organic carbon (TOC), TK, and TP were the most important environmental factors on microbial community succession in the two composting systems. Together these results suggest that bamboo sphere as a reusable amendment can shorten maturity period, improve humification degree, increase the contents of nutrient and contribute to the succession of microbial community during food waste composting. These findings provide a theoretical basis for improving the efficiency of food waste composting.

A novel polysaccharides-based bioflocculant produced by Bacillus subtilis ZHX3 and its application in the treatment of multiple pollutants.

A high bioflocculant-producing bacterial strain was identified and named Bacillus subtilis ZHX3. Single-factor experiments suggested that 10 g/L starch and 5 g/L yeast extract were optimal for strain ZHX3 to produce bioflocculant MBF-ZHX3. The maximum flocculating rate reached 95.5%, and 3.14 g/L product was extracted after 3 days of cultivation. MBF-ZHX3 was mainly composed of polysaccharides (77.2%) and protein (14.8%). The polysaccharides contained 28.9% uronic acid and 3.7% amino sugar. Rhamnose, arabinose, galactose, glucose, mannose, and galacturonic acid in a molar ratio of 0.35:1.83:3.09:12.66:0.46:3.81 were detected. MBF-ZHX3 had a molecular weight of 10,028 Da and contained abundant groups (-OH, CO, >PO, C-O-C) contributing to flocculation. Adsorption and bridging was considered as the main flocculation mechanism. MBF-ZHX3 was more effective in decolorizing dyes, removing heavy metals and flotation reagents compared to polyacrylamide. The results implied that MBF-ZHX3 has the potential to substitute polyacrylamide in wastewater treatment because of its excellent biological and environmental benefits.

Recovery of heavy metals from industrial wastewater using bioelectrochemical system inoculated with novel Castellaniella species.

Water pollution is a global issue that has drastically increased in recent years due to rapid industrial development. Different technologies have been designed for the removal of pollutants from wastewater. However, most of these techniques are expensive, generate new waste, and focus solely on metal removal instead of metal recovery. In this study, novel facultative exoelectrogenic strains designated Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 were isolated from a microbial fuel cell (MFC). These isolates were utilized as pure and mixed culture inoculums in a bioelectrochemical system (BES) to produce bioelectricity and treat simulated industrial wastewater. A single-chamber MFC inoculated with the mixed culture attained the highest electricity generation (i.e., 320 mW/m2 power density and 3.19 A/m2 current density), chemical oxygen demand removal efficiency (91.15 ± 0.05%), and coulombic efficiency (54.81 ± 4.18%). In addition, the BES containing biofilms of the mixed culture achieved the highest Cu, Cr, and Cd removal efficiencies of 99.89 ± 0.07%, 99.59 ± 0.53%, and 99.91 ± 0.04%, respectively. The Cr6+ and Cu2+ in the simulated industrial wastewater were recovered via microbial electrochemical reduction as Cr3+ and Cu0, respectively. However, Cd2+ precipitated as Cd (OH)2 or CdCO3 on the surface of the cathodes. These results suggest that a mixed culture inoculum of Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 has great potential as a biocatalyst in BES for heavy metals recovery from industrial wastewater.