Expanded PAH analysis of household air pollution in a rural region of China with high lung cancer incidence.

The domestic combustion of locally sourced smoky (bituminous) coal in Xuanwei and Fuyuan counties, China, is responsible for some of the highest lung cancer rates in the world. Recent research has pointed to methylated PAHs (mPAHs), particularly 5-methylchrysene (5MC), within coal combustion products as a driving factor. Here we describe measurements of mPAHs in Xuanwei and Fuyuan derived from controlled burnings (i.e., water boiling tests, WBT, n = 27) representing exposures during stove use, and an exposure assessment (EA) study (n = 116) representing 24 h weighted exposures. Using smoky coal has led to significantly higher concentrations of known and likely human carcinogens than using smokeless coal, including 5MC (3.7 ng/m3 vs. 1.0 ng/m3 for EA samples and 100.8 ng/m3 vs. 2.2 ng/m3 for WBT samples), benzo[a]pyrene (38.0 ng/m3 vs. 7.9 ng/m3 for EA samples and 455.3 ng/m3 vs. 12.0 ng/m3 for WBT samples) and 7,12-dimethylbenz[a]anthracene (1.9 ng/m3 vs. 0.2 ng/m3 for EA samples and 47.7 ng/m3 vs. 0.6 ng/m3 for WBT samples). Mixed effect models for both EA samples and WBT samples revealed clear variation in mPAHs concentrations depending on smoky coal source while stove ventilation was consistently found to reduce measured concentrations (by up to nine fold and 65 fold for EA and WBT samples respectively when using smoky coal). Fuel type had a larger influence on mPAHs concentrations than stove type. These findings indicate that users of smoky coal experience exposure to many PAHs, including known and suspected human carcinogens (especially during cooking activities), many of which are not routinely tested for. Collectively, this provides insights into the potential etiologies of lung cancer in the region and further highlights the importance of targeting clean fuel transitions and stove refinements as the final goal for reducing household air pollution and its associated health risks.

Effects of ultrasound treatment on the structure, function properties and in vitro digestion of Sipunculus nudus protein.

Sipunculus nudus (S. nudus), an edible marine invertebrate, is rich in myofibrillar proteins. However, its extremely low water solubility and relatively firm texture limit its practical applications. This study aimed to investigate the consequences of different ultrasound amplitude treatments on the structure, functional properties, and digestive characteristics of S. nudus salt soluble protein (SSP). The results showed that ultrasound treatment significantly reduced the particle size, surface tension, and the unordered structure of SSP, while having not impact the zeta potential. Additionally, the results of infrared spectroscopy and intrinsic fluorescence spectrum revealed that ultrasound treatment enhanced the hydrogen bonding and hydrophobic interaction within the components of SSP, leading to a more compact and uniformly distributed protein structure. These changes increased the solubility (increased from 12.07 % to 37.59 %) and optimized the functional properties of SSP (foamability and emulsifiability). Further, the results of in vitro digestion simulation revealed that the antioxidant proteopeptides of SSP were mainly produced in the small intestine, with the ABTS+ radical scavenging capacity ranging from 140 to 170 µg Trolox/mL. Additionally, the antioxidant activity of the digestive fluid was enhanced with increasing ultrasound amplitude. This work linked structural changes in denatured proteins to their functional properties and digestive characteristics. This study provided a new direction for developing easily digestible food ingredients.

Hydrogen Sulfide Improves Postharvest Quality of Okra (Abelmoschus esculentus (L.) Moench) Pods by Enhancing Antioxidant Capacity and Delaying Lignification.

Okra (Abelmoschus esculentus (L.) Moench) pod storage is challenging due to its high water content and tendency to lignify. Sodium hydrosulfide (NaHS) served as an H2S donor in this investigation. Compared with the control group, the group treated with 0.5 mmol/L NaHS solution effectively maintained the appearance quality, and its weight loss was only 6.21% at 20 days. The H2S treatment not only preserved tissue nutrients but also significantly enhanced catalase (CAT), ascorbic acid peroxidase (APX), and superoxide dismutase (SOD) activities while decreasing oxidant damage. In addition, H2S slowed down lignin synthesis by inhibiting the activities of key enzymes such as phenylalanine ammonialyase (PAL), cinnamate 4-hydroxylase (C4H), and cinnamyl alcohol dehydrogenase (CAD) in the lignin biosynthesis pathway. Transcriptome analysis revealed that H2S affects 34 genes in the phenylpropanoid biosynthesis pathway, such as AePAL, Ae4CL1, AeCCOAOMT1, AePOD, etc., which inhibit lignin synthesis of okra pods. All in all, moderate H2S can improve postharvest quality and extend the shelf-life of okra pods by enhancing antioxidant capacity and delaying lignification; the results will provide an overview of its application in the preservation of okra pods.

Stepwise surgical management of binder syndrome with skeletal class III malocclusion in adults.

Our study aimed to evaluate a stepwise treatment of class III malocclusion accompanied with flat nasal deformity, using orthodontics, orthognathic surgery, and rhinoplasty, as well as stability during long-term follow-up. In total, 27 patients with nasomaxillary hypoplasia and skeletal class III malocclusion were enrolled in this study. All patients had accepted orthodontic and orthognathic surgery, followed by rhinoplasty with costal cartilage as the second surgical procedure. Clinical results were evaluated by radiography, medical photography, questionnaire, and cephalometric analysis. All patients were satisfied with the surgical results and no serious complications occurred. During the follow-up, the patients showed well-corrected midface contour and nasal projection, and stable occlusion. The costal cartilage grafts were well fixed, without obvious absorption deformation. Lateral cephalometric analysis and overlay results showed that the postoperative point A had advanced approximately 5.20 ± 1.43 mm and the SNA angle had increased by approximately 5.59 ± 2.86°. Soft-tissue measurements showed a 14.22 ± 6.56° decrease in the facial lobe, while the nasolabial angle had increased by 16.83 ± 6.65° postoperatively. The results suggested that stepwise orthodontic-orthognathic surgery and rhinoplasty produce a predictable and stable result in long-term follow-up.

Macronutrient digestion and polyphenol bioaccessibility in oat milk tea products: an in vitro gastrointestinal tract study.

People are increasingly preparing milk tea using plant-based milks rather than cow's milk, e.g., vegans, those with lactose intolerance, and those with flavor preferences. However, adding plant-based milks to tea may impact the digestion, release, and bioaccessibility of nutrients and nutraceuticals in both the tea and milk. In this study, oat milk tea model systems (OMTMSs) containing different fat and tea polyphenol concentrations were used to explore the impact of tea on macronutrient digestion in oat milk, as well as the impact of oat milk matrix on the polyphenol bioaccessibility in the tea. An in vitro gastrointestinal model that mimics the mouth, stomach, and small intestine was used. Tea polyphenols (>0.25%) significantly reduced the glucose and free fatty acids released from oat milk after intestinal digestion. Tea polyphenols (>0.10%) also inhibited protein digestion in oat milk during gastric digestion but not during intestinal digestion. The bioaccessibility of the polyphenols in the tea depended on the fat content of oat milk, being higher for medium-fat (3.0%) and high-fat (5.8%) oat milk than low-fat (1.5%) oat milk. Liquid chromatography-tandem mass spectrometry (UPLC-ESI-MS/MS) analysis showed that lipids improved the tea polyphenol bioaccessibility by influencing the release of flavonoids and phenolic acids from the food matrices. These results provide important information about the impact of tea on the gastrointestinal fate of oat milk, and vice versa, which may be important for enhancing the healthiness of plant-based beverages.

Enhancement of Colorimetric pH-Sensitive Film Incorporating Amomum tsao-ko Essential Oil as Antibacterial for Mantis Shrimp Spoilage Tracking and Fresh-Keeping.

Anthocyanin-based smart packaging has been widely used for food freshness monitoring, but it cannot meet the requirements of smart films with antibacterial properties. This study aimed to enhance the antibacterial properties of intelligent films by incorporating Amomum tsao-ko essential oil (AEO) for mantis shrimp spoilage tracking and keeping the product fresh. A smart film was designed by introducing AEO and purple potato anthocyanin (PPA) to a polyvinyl alcohol/cellulose nanocrystal (PVA/CNC) polymer matrix. Our findings revealed that APP and AEO imparted the smart film with a favorable oxygen barrier, UV protection, mechanical properties, and antioxidant and pH/NH3-sensitive functions. Interestingly, the PVA/CNC-AEO-PPA film achieved 45.41% and 48.25% bactericidal efficacy against S. putrefaciens and V. parahaemolyticus, respectively. Furthermore, a visual observation confirmed that the target film (PVA/CNC-AEO-PPA) changed color significantly during mantis shrimp spoilage: rose red-light red-pink-light gray-dark gray. Meanwhile, the PVA/CNC-AEO-PPA film retarded the quality deterioration of the mantis shrimp effectively. The PVA/CNC-AEO-PPA film shows great application potential in mantis shrimp preservation and freshness monitoring; it is expected to become a rapid sensor for detecting seafood quality non-destructively and a multifunctional film for better preservation of product quality.

Gelatin based preservation technologies on the quality of food: a comprehensive review.

Gelatin has played a great potential in food preservation because of its low price and superior film forming characteristics. This review provides a comprehensive overview of the latest research progress and application of gelatin preservation technologies (film, coating, antifreeze peptide, etc.), discussing their preservation mechanisms and efficiency through the viewpoints of quality and shelf life of animal and aquatic products as well as fruits and vegetables. It showed that bioactive and intelligent gelatin-based films exhibit antibacterial, antioxidant, water resistance and pH responsive properties, making them excellent for food preservation. In addition, pH responsive properties of films also intuitively reflect the freshness of food by color. Similarly, gelatin and its hydrolysate can be widely used in antifreeze peptides to reduce the mass loss of food during freezing and extend the shelf life of frozen food. However, extensive works are still required to extend their commercial application values.

Fabrication, characterization, and bioactivity of self-assembled carrier-free colloidal dispersions from Citrus × Limon 'Rosso' essential oil and tea polyphenols.

Carrier-free nanodelivery systems are fully self-assembled from active ingredients through interactions, offering the advantages of green, safe, and large-scale manufacturing. To improve the dispersion of Citrus × limon 'Rosso' peel essential oil (CEO) in water and boost the biological activity of CEO and tea polyphenols (TP), self-assembled CEO-TP colloidal dispersions (CEO-TP Colloids) were fabricated through sonication without surfactants or carriers. The optimal CEO and TP concentrations in the CEO-TP Colloids were determined to be 10.0 and 20.0 mg/mL by particle size and stability analyzer, respectively. The CEO self-assembled with TP to form spherical nanoparticles through hydrophobic and hydrogen-bonding interactions, whereas the CEO in CEO-TP Colloids weakened TP intramolecular aggregation. Meanwhile, the CEO-TP Colloids showed synergistic effects with better antibacterial, cellular antioxidant, and anti-inflammatory activities than single components. This study opens up the possibility of carrier-free co-delivery of hydrophobic and hydrophilic active components developed into food-grade formulations with multiple bioactivities.

Does adjunctive fixation in conjunction with miniplate affect condylar position and morphology after mandibular advancement through bilateral sagittal split ramus osteotomy? A retrospective 3-dimensional CT comparative study.

To minimize condylar positional and morphological changes after mandibular advancement through bilateral sagittal split ramus osteotomy (BSSRO), surgeons add either a bicortical screw or a two-hole plate distal to the conventional single miniplate. Since there have been no previous studies investigating the effect of this combination, our study aimed to evaluate the short- and long-term effects of these adjunctive fixation methods (AFM) on condylar positional and morphological changes after mandibular advancement through BSSRO. This retrospective cohort study included consecutive patients with retruded mandibles who were treated in the Department of Orthognathic and TMJ Surgery at West China Hospital of Stomatology, Sichuan University. The patients were divided into two groups based on the primary predictor variable, which was the addition of AFM - either a single bicortical screw or a two-hole plate in addition to the single miniplate. The primary outcome variable was the condylar positional and morphological changes after mandibular advancement through BSSRO. Three-dimensional facial CT scans were obtained at three different time points (preoperatively - T0, 1 week postoperatively - T1, and 1 year postoperatively - T2) and analyzed using ITK-SNAP, 3D Slicer, and SlicerSALT software. Intergroup comparisons were conducted with an independent t-test, with a p-value of <0.05 considered significant. Correlations between the variables were estimated by Pearson correlation. The study comprised 51 patients (32 females, 19 males; mean age 25.13 ± 4.24 years), involving a total of 81 condyles (21 unilateral and 60 bilateral). There was a significant difference in long-term condylar displacement in favor of AFM along with a single miniplate (p < 0.001). The bicortical screw group recorded less condylar displacement than the two-hole plate group horizontally (0.11 mm vs 0.22 mm) and sagittally (0.03 mm vs 0.17 mm), but more vertically (0.85 mm vs 0.03 mm). Bone formation associated with AFM occurred on all condylar surfaces, compared with only three surfaces in the single miniplate group. The adjunctive method in addition to the single miniplate fixation method showed less condylar displacement and more bone apposition after mandibular advancement through BSSRO. The follow-up duration variable was the only significant determinant for volumetric changes in the condyle.

Evaluation of Different Fixation Methods Combinations After L-Shaped Osteotomy Reduction Malarplasty: An In Vitro Biomechanical Study.

BACKGROUND: This in vitro study compared the stability of different fixation method combinations for the zygomatic complex after simulated L-shaped osteotomy reduction malarplasty, a common facial contouring surgery in East Asia with high postoperative complications due to poor fixation methods. MATERIALS AND METHODS: The study used 108 zygoma replicas with various fixation methods combinations in the zygomatic body (L-shaped plate with short wing on zygoma and on the maxilla, two bicortical screws, one bicortical screw with L-shaped plate, square plate, and rectangular plate) and zygomatic arch (Mortise-Tenon structure, 3-hole plate, and Mortise-Tenon structure plus short screw). The failure force under incremental load was applied through the Instron tensile machine to a well-stabilized model using a rubber band simulating the masseter muscle and recorded the increasing force digitally. ANOVA test was used for comparison between recorded values (P < 0.05). RESULTS: The results showed that the most stable combination was a six-hole rectangular plate and a Mortise-Tenon structure plus one short screw (358.55 ± 51.64 N/mm2). The results also indicated that the placement vector of the fixation methods around the L-shaped osteotomy and the use of the two-bridge fixation method were important factors in enhancing the stability of the zygomatic complex. CONCLUSION: The study suggested that surgeons should choose appropriate fixation methods based on these factors to reduce postoperative complications and improve surgical outcomes. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

The L-shaped Zygomatic Reduction with Oblique or Vertical Resection: Which One is the Optimal Choice?

BACKGROUND: This study aims to investigate the optimal surgical techniques in reduction malarplasty by comparing the difference between the L-shaped osteotomy with vertical and oblique bone resection. METHODS: One hundred and twenty patients who visited our department for L-shaped osteotomy with either vertical (Group Ⅰ) or oblique bone resection (Group Ⅱ) from 2015 to 2021 were retrospectively reviewed. The preoperative and postoperative spiral computed tomography (CT) data were analyzed. The preoperative CT data was also used to simulate the virtual and model surgery. RESULTS: The results showed that a broken-bridge-like structure with a bony gap of 2.86±1.03 mm at the zygomatic arch root was observed in Group Ⅰ, and a mortice and tenon joint structure with a bone overlap of 2.28±0.58 mm was formed in Group Ⅱ. The zygoma in Group Ⅰ displaced significantly in the vertical direction and horizontal direction during the follow-up. Simultaneously, the incidence of complications was higher in Group Ⅰ. In the mechanism analysis through virtual and model surgery, the zygomatic segment was shifted anteriorly and inferiorly in Group Ⅰ, and a bony gap was detected at the zygomatic arch root. Conversely, a superior and posterior movement was performed in Group Ⅱ and it maintained the zygomatic complex integral with bone overlap at the zygomatic arch root upon repositioning. CONCLUSION: This study suggested that L-shaped osteotomy with oblique bone resection could be the optimal choice for reducing zygomatic prominence.

The accuracy of virtual surgical planning assisted management for L-shaped reduction malarplasty: A retrospective study.

This study aims to evaluate the accuracy of L-shaped reduction malarplasty with bone setback or resection on the zygoma and the mortice and tenon joint structure on the zygomatic arch under the guidance of virtual surgical planning (VSP). Adult patients with zygomatic protrusion or hypertrophy were enrolled and divided. L-shaped reduction malarplasty with or without bone resection and with the mortice and tenon joint structure on the zygomatic arch was conducted either by digital procedures comprising VSP and three-dimensional (3D) printing titanium templates (Group I) or by conventional methods (Group II). Positions of representative landmarks and superimposition models were analyzed by 3D cephalometry. Satisfaction rate and incidences of clinical complications were compared as well. Satisfactory reduction of zygomatic protrusion or hypertrophy was recognized among all 78 patients. Improved symmetry and great surgical accuracy were observed according to the cephalometry analyses. The bone segment movement of virtual plans and actual results in Group I were measured and showed no obvious difference for the inward movement (5.42 ± 0.98 mm vs. 5.33± 0.93 mm, P = 0.6906) and the sagittal overlap (4.77 ± 1.32 mm vs. 4.87± 1.21 mm, P = 0.7386) at the zygoma roots, along with the step length at the long-arm of the L-shaped osteotomy line (2.43 ± 1.11 mm vs. 2.39± 0.89 mm, P = 0.8665). The high resemblance between virtual plans and actual results was depicted via superimposition models. Meanwhile, a higher satisfaction rate (28 in 36, 78% vs. 20 in 42, 48%) and a lower incidence rate of complications (11 in 36, 31% vs. 21 in 42, 50%) were found in Group I. Within the limitations of the study it seems that the application of VSP in reduction malarplasty could significantly contribute to better surgical accuracy and reduced difficulties in the operation, which would be beneficial to patients with zygoma hypertrophy or prominence.

Morphological Changes of the Mandibular Angle After Orthognathic Surgery with Class III Deformity in East Asia.

The aims of this study were to analyze the morphological changes of the mandibular angle after orthognathic surgery for mandibular setback and investigate related factors. This retrospective study included patients from January 2017 to December 2021 diagnosed with skeletal class III deformity who underwent BSSRO (Group I) or bimaxillary surgery (Group II). Preoperative (T0), within 1 month postoperatively (T1), and 6 months postoperatively (T2) CT scans were collected from 61 patients to three-dimensionally analyze the proximal segment displacement, the linear and angular changes of the mandibular angle. The gonion points moved posteriorly and laterally (P < 0.001), while the inferior movement was not significant (P = 1.000, P = 0.274). The intergonial width increased by 3.32 ± 1.87 mm and 2.34 ± 1.77 mm as revealed by T2 CTs, respectively, in Group I and Group II. Mandibular angle decreased in both groups and by 1.41 ± 2.95° in Group I and 1.37 ± 3.41° in Group II. The increase in intergonial width between T1 and T0 was negatively correlated with the preoperative mandibular angle (P = 0.003) and positively correlated with the transverse outward movement of the proximal segment (P < 0.001). After surgery, the intergonial width increased and the inferior and posterior border of the proximal segment flared outward. The changes in intergonial width and mandibular angle were mainly related to the rotation of the proximal segment, which has a certain impact on the aesthetics of the lower face. Therefore, controlling the position of the proximal segment is of vital importance to lessen the changes in the mandibular angle area.Level of Evidence III. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Endovenous Microwave Ablation Versus Radiofrequency Ablation for the Treatment of Lower Limb Varicose Veins.

BACKGROUND: This study aimed to retrospectively compare the clinical outcomes of endovenous microwave versus radiofrequency ablation combined with foam sclerotherapy in patients with lower limb varicose veins. METHODS: We identified patients with lower limb varicose veins treated with endovenous microwave ablation or radiofrequency ablation with foam sclerotherapy between January 2018 and June 2021 at our institution. Patients were followed-up for 12 months. Clinical results, including the pre-post-Aberdeen Varicose Vein Questionnaire and post-Aberdeen Varicose Vein Questionnaire and Venous Clinical Severity Score, were compared. Complications were documented and treated accordingly. RESULTS: We included 287 cases (295 limbs total; endovenous microwave ablation + foam sclerosing agent: n = 142, 146 limbs; radiofrequency ablation + foam sclerosing agent: n = 145, 149 limbs). The operative time was shorter for endovenous microwave ablation than radiofrequency ablation (42.58 ± 15.62 min vs. 65.46 ± 24.38 min, P < 0.05); however, other procedural parameters did not differ. Furthermore, hospitalization costs for endovenous microwave ablation were lower than those for radiofrequency ablation (21,063.74 ± 850.47 yuan vs. 23,312.40 ± 1,035.86 yuan, P < 0.05). At the 12-month follow-up, the great saphenous vein closure rate was similar in both groups (endovenous microwave ablation, 97% [142/146] vs. radiofrequency ablation, 98% [146/149]; P > 0.05). Additionally, the satisfaction or incidence rates of complications were not different among the groups. In both groups, the Aberdeen Varicose Vein Questionnaire and Venous Clinical Severity Score values were significantly lower 12 months postsurgery than before surgery; however, the postoperative values did not differ. CONCLUSIONS: Endovenous microwave ablation effectively treated lower limb varicose veins, with similar short-term effects as radiofrequency ablation. Moreover, it had a shorter operative time and was less expensive than endovenous radiofrequency ablation.

Biodegradable Polyurethane Scaffolds in Regeneration Therapy: Characterization and In Vivo Real-Time Degradation Monitoring by Grafted Fluorescent Tracer.

There is an urgent need to assess material degradation in situ and in real time for their promising application in regeneration therapy. However, traditional monitoring methods in vitro cannot always profile the complicated behavior in vivo. This study designed and synthesized a new biodegradable polyurethane (PU-P) scaffold with polycaprolactone glycol, isophorone diisocyanate, and l-lysine ethyl ester dihydrochloride. To monitor the degradation process of PU-P, calcein was introduced into the backbone (PU-5) as a chromophore tracing in different sites of the body and undegradable fluorescent scaffold (CPU-5) as the control group. Both PU-P and PU-5 can be enzymatically degraded, and the degradation products are molecularly small and biosafe. Meanwhile, by virtue of calcein anchoring with urethane, polymer chains of PU-5 have maintained the conformational stability and extended the system conjugation, raising a structure-induced emission effect that successfully achieved a significant enhancement in the fluorescence intensity better than pristine calcein. Evidently, unlike the weak fluorescent response of CPU-5, PU-5 and its degradation can be clearly imaged and monitored in real time after implantation in the subcutaneous tissue of nude mice. Meanwhile, the in situ osteogeneration has also been promoted after the two degradable scaffolds have been implanted in the rabbit femoral condyles and degraded with time. To sum up, the strategy of underpinning tracers into degradable polymer chains provides a possible and effective way for real-time monitoring of the degradation process of implants in vivo.

Therapeutic properties of isoliquiritigenin with molecular modeling studies: investigation of anti-pancreatic acinar cell tumor and HMG-CoA reductase inhibitor activity for treatment of hypercholesterolemia.

Introduction: Isoliquiritigenin, one of the components in the root of Glycyrrhiza glabra L., is a member of the flavonoids, which are known to have anti-tumor activity in vitro and in vivo. HMG-CoA reductase inhibitors, called statins, are used to reduce the risk of heart disease by lowering blood cholesterol levels. Material and methods: HMG-CoA reductase activity was determined according to the method described by Takahashi et al. The structure of human HMG-COA reductase in the resolution of 2.22 Å with the X-ray diffraction method (PDB ID: 1HWK) was obtained from the PDB database. Results: In our study, the inhibitory activity of isoliquiritigenin towards HMG-CoA reductase showed a lower value of IC50 = 193.77 ±14.85 µg/ml. For a better understanding of biological activities and interactions, the molecular docking study was performed. The results of molecular docking revealed that isoliquiritigenin with a docking score of -6.740 has a strong binding affinity to HMG-COA reductase. Therefore, this compound could be considered as a potential inhibitor for the enzyme. Also, the activity of isoliquiritigenin against common human pancreatic acinar cell tumor cell lines, i.e. 266-6, TGP49, and TGP47, was evaluated. Conclusions: The cells treated with isoliquiritigenin were assessed by MTT assay for 48 h as regards the cytotoxicity and anti-human pancreatic acinar cell tumor properties in normal (HUVEC) and human pancreatic acinar cell tumor cell lines, i.e. 266-6, TGP49, and TGP47. The IC50 values of isoliquiritigenin were 262, 389, and 211 µg/ml against 266-6, TGP49, and TGP47 cell lines, respectively. The viability of the human pancreatic acinar cell tumor cell line decreased dose-dependently in the presence of isoliquiritigenin. After clinical study, isoliquiritigenin can be utilized as an efficient drug in the treatment of human pancreatic acinar cell tumor in humans.

Economic values of reproductive and growth traits in Chinese Yiling sheep.

This study aimed to calculate the economic value (EV) of reproductive and growth traits for Yiling sheep. A bio-economic model was developed to assess the economic value of litter size (LS), litter size at weaning (LSW), age at first lambing (AFL), lambing interval (LI), birth weight (BW), weaning weight (WW), and 6-month body weight (6MW). The sensitivity of the economic value of traits to changes in market prices was also analyzed. In this study, the trait with the highest EV was LSW (427.97 ¥), followed by LS (419.96 ¥), BW (52.13 ¥), 6MW (14.46 ¥), WW (11.03 ¥), AFL (-0.51 ¥), and LI (-9.09 ¥). LS was the most important trait in the production system with a relative economic weight of 22.81%, followed by 6MW and LSW with relative economic weights of 18.98% and 19.01%, respectively. All traits assessed, except AFL and LI, had positive economic values, indicating that genetic improvement of these traits would have a positive impact on profitability. The results of the sensitivity analysis showed that the economic value of AFL was not sensitive to price changes. All growth traits were unaffected by price changes in labor and medical costs. In addition, the LS, LSW, LI, WW, and 6MW were sensitive to changes in liveweight and feed prices. Generally, as feed prices increased, the economic value of all traits except LI and BW decreased. Except for LI and BW, the economic value of all traits increased due to the rise in liveweight prices. This suggested that liveweight and feed prices significantly affect the profitability of the production system.

Xanthogranulomatous cystitis and bilateral ureteral reflux due to bladder neck obstruction: a case report.

Xanthogranulomatous cystitis (XC) is a rare benign disease of chronic granulomatous inflammation. We report a 23-year-old woman with xanthogranulomatous cystitis. She was referred to our hospital with the chief complaint of a 1-year history of frequent, urgent dysuria with recurrent fever. An imaging examination showed bilateral ureteral reflux and a normal bladder. Urodynamic findings suggested bladder outlet obstruction and increased post-void residual urine. Finally, the patient underwent endoscopy, and bladder neck obstruction was confirmed. Additionally, we found multiple granulomatous masses in the bladder. Therefore, we performed transurethral resection of the tumor and bladder neck. A histopathological examination of resected tumor tissue showed xanthogranulomatous cystitis, and the patient received anti-infective therapy. Follow-up cystourethroscopic results and urination symptoms returned to normal, and the bilateral ureteral reflux was gradually reduced.

Purification and characterization of a glycoprotein from Sipunculus nudus and its immune-enhancing activity to RAW 264.7 macrophages.

Sipunculus nudus, an edible marine invertebrate, has long been used as traditional Chinese medicine in folk remedies. In order to assess the immunoregulatory activity of glycoproteins in Sipunculus nudus and conduct a structure-activity relationship, a glycoprotein (SGP1) with molecular mass of 9.26 kDa was purified from Sipunculus nudus, and its chemical structure as well as immune-enhancing activity was investigated in this study. Structure analysis revealed that SGP1, a protein-dominate glycoprotein with O-glycosidic bonds, contained 92.8 % protein and 3.1 % saccharide. GC-MS result indicated that the saccharide moieties of SGP1 basically consisted of lyxose (Lyx), xylose (Xyl) as well as glucose (Glu) at a molar proportion of 0.87:4.16:1.36. The fourier transform infrared specoscopy (FT-IR) result proved that SGP1 have a typical characteristic of glycoprotein. Besides, circular dichroism (CD) result showed that SGP1 contained 4.1 % α-helix, 42.5 % ß-sheet, 21.4 % ß-turn, and 32.0 % random coil, indicating it's mainly a ß-sheet glycoprotein. The amino acid sequence of SGP1 shared a similarity to the Myohemerythrin (sp|Q5K473|HEMTM) with protein sequence coverage of 28.3 %. Moreover, the activity evaluation results showed that SGP1 exhibited significant immune-enhancing activity to the RAW 264.7 macrophages by promoting macrophages proliferation, enhancing phagocytic capacity, and simultaneously stimulating the secretions of nitric oxide (NO), interleukin-1ß (IL-1ß), tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) via NF-κB pathways. In this study, SGP1 as a novel glycoprotein had an obvious immune-enhancing activity to macrophages, and thus could be applied in the functional foods as a potential immunopotentiator for the hypoimmune population.