Efficient Hydrogen Production over Molybdenum Tungsten Bimetallic Oxide NF/PMonW12-n Catalyst on Nickel Foam.

Developing inexpensive, efficient, and stable catalysts is crucial for reducing the cost of electrolytic hydrogen production. Recently, polyoxometalates (POMs) have gained attention and widespread use due to their excellent electrocatalytic properties. This study designed and synthesized three composite materials, NF/PMonW12-n, by using phosphomolybdic-tungstic heteropolyacids as precursors to grow in situ on nickel foam via the hydrothermal process and subsequent calcination. Then, their catalytic performances are systematically investigated. This work demonstrates that the NF/PMonW12-n catalysts generate more low valent oxides under the synergistic effect of Mo and W, further enhancing activity for hydrogen evolution reaction (HER). Among these electrocatalysts, NF/PMo6W6 exhibits the perfect HER performance, η10 is only 74 mV. It also shows great stability during long-term electrolysis. The current study introduces a fresh approach for producing electrocatalysts that are both cost-effective and highly efficient.

Metabolic Profiles of Offspring Born From Biopsied Embryos from Toddlerhood to Preschool Age.

CONTEXT: Embryo biopsy, which is necessary for preimplantation genetic testing (PGT), has not been fully investigated regarding its potential influences and safety. Previous studies of children born from biopsied embryos (PGT children) have primarily centered around their growth and neuropsychological development, while there remains limited knowledge concerning their endocrine and metabolic parameters. OBJECTIVE: This study aims to examine the effect of trophectoderm (TE) biopsy on metabolic outcomes for PGT children. METHODS: A total of 1267 children from the Center for Reproductive Medicine, Shandong University, who were conceived through in vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI) with and without PGT, were analyzed in this study. Three sets of measurements pertaining to growth and metabolism were taken at each predetermined follow-up time point. The linear regression models within a generalized estimating equation were employed to examine the associations between the PGT and each outcome measure and the approach of false discovery rate was used to correct for multiple comparisons. RESULTS: After controlling for confounding factors and correcting for multiple comparisons, no statistically significant difference was identified in any of the measured variables between the PGT children and children conceived by IVF alone (IVF children) and children conceived through IVF using ICSI (ICSI children). The same is true also for age- or sex-based subgroup analyses. CONCLUSION: Between the ages of 1 and 5 years, there are no clinically adverse metabolic outcomes observed in PGT children, and their metabolic profiles are essentially identical to those of IVF children and ICSI children.

PM-Vis: A Visual Analytics System for Tracing and Analyzing the Evolution of Pottery Motifs.

In Chinese archaeological research, analyzing the evolution of motifs in ancient pottery is crucial for studying the spread and growth of cultures across various eras and regions. However, such analyses are often challenging due to the complexities of identifying motifs with evolutionary connections that may manifest concurrent changes in appearance, space, and time, compounded by ineffective documentation. We propose PM-Vis, a visual analytics system for tracing and analyzing the evolution of pottery motifs. PM-Vis is anchored in a "selection-organization-documentation" workflow. In the selection stage, we design a three-fold projection paired with a motif-based search mechanism, displaying the appearance similarity and temporal and spatial proximities of all motifs or a specific motif, aiding users in selecting motifs with evolutionary connections. The organization stage helps users establish the evolutionary sequence and segment the selected motifs into distinct evolutionary phases. Finally, the documentation stage enables users to record their observations and insights through various forms of annotation. We demonstrate the usefulness and effectiveness of PM-Vis through two case studies, expert feedback, and a user study.

Evaluation of large language models in breast cancer clinical scenarios: a comparative analysis based on ChatGPT-3.5, ChatGPT-4.0, and Claude2.

BACKGROUND: Large language models (LLMs) have garnered significant attention in the AI domain owing to their exemplary context recognition and response capabilities. However, the potential of LLMs in specific clinical scenarios, particularly in breast cancer diagnosis, treatment, and care, has not been fully explored. This study aimed to compare the performances of three major LLMs in the clinical context of breast cancer. METHODS: In this study, clinical scenarios designed specifically for breast cancer were segmented into five pivotal domains (nine cases): assessment and diagnosis, treatment decision-making, postoperative care, psychosocial support, and prognosis and rehabilitation. The LLMs were used to generate feedback for various queries related to these domains. For each scenario, a panel of five breast cancer specialists, each with over a decade of experience, evaluated the feedback from LLMs. They assessed feedback concerning LLMs in terms of their quality, relevance, and applicability. RESULTS: There was a moderate level of agreement among the raters (Fleiss' kappa=0.345, P<0.05). Comparing the performance of different models regarding response length, GPT-4.0 and GPT-3.5 provided relatively longer feedback than Claude2. Furthermore, across the nine case analyses, GPT-4.0 significantly outperformed the other two models in average quality, relevance, and applicability. Within the five clinical areas, GPT-4.0 markedly surpassed GPT-3.5 in the quality of the other four areas and scored higher than Claude2 in tasks related to psychosocial support and treatment decision-making. CONCLUSION: This study revealed that in the realm of clinical applications for breast cancer, GPT-4.0 showcases not only superiority in terms of quality and relevance but also demonstrates exceptional capability in applicability, especially when compared to GPT-3.5. Relative to Claude2, GPT-4.0 holds advantages in specific domains. With the expanding use of LLMs in the clinical field, ongoing optimization and rigorous accuracy assessments are paramount.

Numerical simulation of rock blasting under different in-situ stresses and joint conditions.

High primary rock stress can limit the generation of rock cracks caused by blasting, and blasting usually shows different rock breaking states under different primary rock stress conditions. There are a large number of naturally formed joints in rock mass, due to the limitations of laboratory tests, a numerical model of jointed rock mass was established using LS-DYNA software to investigate the evolution of blasting damage under various in-situ stresses and open joints. In this simulation, using the Lagrange-Euler (ALE) procedure and the equation of state (JWL) that defines explosive materials, the study considered different joint thicknesses (2cm, 4cm, and 6cm), joint angles (0°, 30°, 60°, and 90°), and in-situ stress conditions (lateral stress coefficients of 0.5, 1, and 2, with vertical in-situ stresses of 10MPa and 20MPa), through stress analysis and damage area comparison, the relationship between damage crack propagation and horizontal and vertical stress difference is explored. The research aimed to understand the mechanisms underlying crack initiation and propagation. The results show that: (1) The presence of joints exerts a barrier effect on the expansion and penetration of cracks. When explosion stress waves reach the joint surface, their propagation is impeded, leading to the diffusion of wing cracks at the joint ends. When the lateral stress coefficient and joint angle are the same, an increase in initial in-situ stress results in a reduction in the area of the blasting damage zone. (2) Under the same initial in-situ stress conditions, the area of the blasting damage zone initially increases and then decreases with an increasing joint angle. However, it remains larger than that without a joint, and there exists an optimal angle that maximizes the damage area. In the simulated conditions, the area of damage cracks is greatest when the joint angle is 60° dip angle. (3) The presence of initial in-situ stress has a certain impact on the initiation and expansion of blasting cracks. The degree and nature of this influence are not solely related to the lateral stress coefficient but also depend on the joint's angle and thickness. When in-situ stress is present, the initial in-situ stress field's pressure is not conducive to the initiation and propagation of blasting cracks. However, the existence of a joint has a noticeable guiding and promoting effect on crack propagation, and the pattern of crack propagation is influenced by both joint and in-situ stress conditions.

Improving and controlling the drug loading capacity of seven quinolones in minced fish matrix based on microfluidics.

Traditional spiking methods for preparing matrix reference material of aquatic products is difficult to control the drug content in the matrix, especially one matrix containing multiple drugs. Minced fish is commonly used for the preparation of matrix reference materials in aquatic products, which is a relatively complex matrix with stickiness and difficult handling. Drug loading capacity is a key factor affecting the effectiveness of matrix reference materials. Here, we proposed a new spiking approach to improve the drug loading capacity of seven quinolones based on microfluidics, simultaneously. Fresh grass carp tissue underwent grinding, fine filtration, centrifugation and reconstituted in distilled water to form a liquid sample, which was subsequently mixed with a sodium alginate solution (1 %) at a ratio of 1:1.2. The mixed solution was supplemented with seven quinolones of equal concentration, followed by the preparation of uniform fish gel microspheres using microfluidic technology. The results indicated that the recoveries of seven quinolones ranged from 82.54 % to 114.17 %, demonstrating a significant improvement in the drug loading capacity of these quinolones compared to traditional methods. Moreover, the drug concentration in the matrix can be precisely controlled. A strong linear relationship was observed between the concentration of seven quinolones in the matrix and its initial concentration, which could serve as a reference for the development of other matrix reference materials.

Multiscale nanoengineering fabrication of air electrode catalysts in rechargeable Zn-air batteries.

The development of cost-effective, high-activity and stable catalysts to accelerate the sluggish kinetics of cathodic oxygen reduction/evolution reactions (ORR/OER) plays a critical part in commercialization application of rechargeable Zn-air batteries (RZABs). Herein, a multiscale nanoengineering strategy is developed to simultaneously stabilize Co-doped Fe nanoparticles originated from metal-organic framework-derived approach and atomic Fe/Co sites derived from metal nanoparticle-atomized way on N-doped hierarchically tubular porous carbon substrate. Thereinto, metal nanoparticles and single atoms are respectively used to expedite the OER and ORR. Consequently, the final material is acted as an oxygen electrode catalyst, displaying 0.684 V of OER/ORR potential gap, 260 mW cm-2 of peak power density for liquid-state RZAB, 110 mW cm-2 of peak power density for solid-state RZAB, and 1000 charge-discharge cycles without decay, which confirms great potential for energy storage and conversion applications.

Universal Sublimation Strategy to Stabilize Single-Metal Sites on Flexible Single-Wall Carbon-Nanotube Films with Strain-Enhanced Activities for Zinc-Air Batteries and Water Splitting.

Single-metal-site catalysts have recently aroused extensive research in electrochemical energy fields such as zinc-air batteries and water splitting, but their preparation is still a huge challenge, especially in flexible catalyst films. Herein, we propose a sublimation strategy in which metal phthalocyanine molecules with defined isolated metal-N4 sites are gasified by sublimation and then deposited on flexible single-wall carbon nanotube (SWCNT) films by means of π-π coupling interactions. Specifically, iron phthalocyanine anchored on the SWCNT film prepared was directly used to boost the cathodic oxygen reduction reaction of the zinc-air battery, showing a high peak power density of 247 mW cm-2. Nickel phthalocyanine and cobalt phthalocyanine were, respectively, stabilized on SWCNT films as the anodic and cathodic electrocatalysts for water splitting, showing a low potential of 1.655 V at 10 mA cm-2. In situ Raman spectra and theoretical studies demonstrate that highly efficient activities originate from strain-induced metal phthalocyanine on SWCNTs. This work provides a universal preparation method for single-metal-site catalysts and innovative insights for electrocatalytic mechanisms.

Evaluation of pharmaceutical consumption between urban and suburban catchments in China by wastewater-based epidemiology.

Wastewater-based epidemiology (WBE) is amply used for estimating human consumption of chemicals, yet information on regional variation of pharmaceuticals and their environmental fate are scarce. Thus, this study aims to estimate the consumption of three cardiovascular, four non-steroidal anti-inflammatory pharmaceuticals (NSAIDs), and four psychoactive pharmaceuticals between urban and suburban catchments in China by WBE, and to explore their removal efficiencies and ecological risks. Eleven analytes were detected in both influent and effluent samples. The estimated consumptions ranged from

Subspace-Map: Interactive Visual Analysis for Subspace Data with a Map Metaphor.

Subspace analysis of high-dimensional data is extremely challenging due to the huge exploration space. We propose Subspace-Map, a novel approach with a map metaphor for interactive exploration of various subspaces. We utilize a subspace search algorithm to identify a moderate number of potentially valuable subspaces, each visualized as a city on the map. Similar cities are clustered into provinces and countries, highlighting common data and dimensional patterns that can guide users in constructing desired subspaces. With the map, users can grasp an overview of the exploration space and explore different subspaces via recommended tour routes in more detail. We demonstrate the effectiveness of Subspace-Map through cases with real-world data, experiments with user feedback, and a comparison with state-of-the-art subspace data visualizations.

NSUN2-Mediated m5C Methylation Impairs Endometrial Receptivity.

Impaired endometrial decidualization is the primary cause of recurrent implantation failure (RIF). RNA methylation modification, especially NSUN family mediated m5C, is crucial for various physiological events, such as maternal-to-zygotic transition, gametogenesis, embryonic development, organismal lifespan, and cell cycle. However, the regulatory mechanisms between NSUN family mediated m5C modification and RIF remain unknown. We acquired NSUN2 expression data of 15 human endometrium samples at proliferative and secretory stages from reproductive cell atlas. The overall pattern of m5C sites and genes was elucidated through m5C-BS-seq, whereas the overall m5C levels in different groups were revealed by dot blot assay. BrdU and western blotting assays were carried out to evaluate the role of NSUN2 in proliferation and autophagy. The effects of NSUN2-mediated m5C modification on embryo attachment were evaluated by an in vitro model of a confluent monolayer of Ishikawa cells cocultured with BeWo spheroids, and its downstream targets were evaluated by real-time reverse-transcription PCR and western blotting in Ishikawa cells. The molecular mechanism for NSUN2 regulating its downstream targets' expression was determined by Cut&Tag and coimmunoprecipitation assays. NSUN2 was increased in SOX9+ cells and widespread in epithelial cell type at the proliferative stage by previous single-cell RNA sequencing data. NSUN2 overexpression (NSUN2OE) in the Ishikawa cell line elevated m5C levels and promoted cell proliferation and autophagy. NSUN2OE reduced attachment efficiency of BeWo cell spheres. Overexpressed NSUN2 was found to increase STAT1 and MMP14 mRNA expressions by inducing exon skipping. NSUN2 interacted with CLDN4 through m5C modification, and NSUN2OE or NSUN2 knockdown resulted in a similar variation tendency of CLDN4. Overexpression of NSUN2 increased CLDN4 H3K9ac modification by downregulating SIRT4 expression at the protein level, leading to the upregulation of CLDN4 mRNA expression. Our results uncovered a novel intricate regulatory mechanism between NSUN2-mediated m5C and RIF and suggested a potential new therapeutic strategy for RIF.

Rapid, Ultrasensitive, and Visual Detection of Pathogens Based on Cation Dye-Triggered Gold Nanoparticle Electrokinetic Agglutination Analysis.

Rapid prescribing of the right antibiotic is the key to treat infectious diseases and decelerate the challenge of bacterial antibiotic resistance. Herein, by targeting the 16S rRNA of bacteria, we developed a cation dye-triggered electrokinetic gold nanoparticle (AuNP) agglutination (CD-TEAA) method, which is rapid, visual, ultrasensitive, culture-independent, and low in cost. The limit of detection (LOD) is as low as 1 CFU mL-1 Escherichia coli. The infection identifications of aseptic fluid samples (n = 11) and urine samples with a clinically suspected urinary tract infection (UTI, n = 78) were accomplished within 50 and 30 min for each sample, respectively. The antimicrobial susceptibility testing (AST) of UTI urine samples was achieved within 2.5 h. In ROC analysis of urine, the sensitivity and specificity were 100 and 96% for infection identification, and 100 and 98% for AST, respectively. Moreover, the overall cost of materials for each test is about US$0.69. Therefore, the CD-TEAA method is a superior approach to existing, time-consuming, and expensive methods, especially in less developed areas.

Adequate nutrient intake mitigate the toxic effects of bromate on the rotifer Brachionus calyciflorus.

Bromate is receiving increased attention as a typical disinfection by-product in aquatic environments, but bromate toxicity tests on invertebrate such as Brachionus calyciflorus rotifer are inadequate. In the present study, the long-term toxicity tests on B. calyciflorus were performed during 21 days under the exposure of different bromate concentrations and two algal density conditions. Furthermore, we evaluated the feeding behaviors of the rotifers under the impact of bromate. The maximum population density of rotifers was significantly reduced at 100 and 200 mg/L bromate exposure at the two algal density conditions. However, we observed that the maximum population density and population growth rate of rotifers were higher at 3.0 × 106 cells/mL algal density than those at 1.0 × 106 cells/mL under the same conditions of bromate exposure. These results suggest that higher food density may have alleviated the negative effects of bromate on rotifers. Meanwhile, the ingestion rate at an algal density of 3.0 × 106 cells/mL was higher than that at 1.0 × 106 cells/mL. The present study provides a basic reference to comprehensively evaluate the toxic effects of bromate on aquatic organisms.

One step cleanup of 160 pesticides and veterinary drugs in aquatic products using melamine-based automatic pressure filtration purification method combined with HPLC-MS/MS.

A 15-channel pressure filtration purification method was presented for high throughput sample preparation of aquatic products. A cost-effective device was constructed and melamine sponge was selected as the cleanup sorbent. Upon interfacing with HPLC-MS/MS, the analytical procedure demonstrated its suitability for quantifying 160 pesticides and veterinary drug residues in aquatic products such as fish, shrimp, and crab. The method achieved sample recoveries ranging from 61.3 to 124.9 %. The detection limits were established between 0.5 and 1.0 µg/kg, while the quantitation limits were confirmed to be within the range of 1.0-2.0 µg/kg. The method was applied to quantify the pesticide and veterinary drug residues in mostly consumed aquatic products from five coastal provinces in China. The results showed significant differences between different aquatic products in the concentrations of pesticide and veterinary drug residues, implying the necessity of supervision for the accurate determination of pesticides and veterinary drugs.

Effect of Phosphorus Modulation in Iron Single-Atom Catalysts for Peroxidase Mimicking.

Fe-N-C single-atom catalysts (SACs) exhibit excellent peroxidase (POD)-like catalytic activity, owing to their well-defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD-like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD-like activity of Fe-N-C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe-N4 active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long-range interaction. The experimental results show that the P-doping process can boost the POD-like activity more than the non-P-doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD-like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.

PCR-Free, Label-Free, and Centrifugation-Free Diagnosis of Multiplex Antibiotic Resistance Genes by Combining mDNA-Au@Fe3O4 from Heating Dry and DNA Concatamers with G-Triplex.

Accurate identification of antibiotic resistance genes (ARGs) is crucial for improving treatment and controlling the spread of antibiotic-resistant bacteria (ARB). Herein, a novel PCR-free, centrifugation-free, and label-free magnetic fluorescent biosensor (MFB) was developed by combining polyA-medium DNA-polyT (mDNA, which contained a partial sequence of a target DNA), gold nanoparticle (AuNP)-anchored magnetic nanoparticle (Au@Fe3O4), complementary strand DNA (CS) of the target DNA, DNA concatamer with G-triplex (G3), and thioflavin T (ThT). Thereinto, Au@Fe3O4 nanoparticles were first capped by mDNA strands within 20 min using a simple hot drying method, and then CS was added and hybridized with mDNA on Au@Fe3O4. Second, a DNA concatamer was used to bind with CS on Au@Fe3O4. When an ARG was present in the sample, the CS would recognize it and release the DNA concatamer into solution by a toehold-mediated strand displacement reaction. Finally, under magnetic separation, the free DNA concatamers with G3 were taken out easily and bound with ThT, resulting in strong fluorescence signals. The fluorescence intensity of ThT was positively correlated with the concentration of the ARG. The whole analysis was accomplished within 1.5 h using 96-well plates. Remarkably, our MFB was universal; eight ARGs were detected by replacing the corresponding mDNA and CS in this study. To verify the practicability of our method, 12 clinically isolated strains were analyzed. The results of the MFB method were in good agreement with those of the quantitative real-time PCR method with an area under the curve of 0.92 (95% confidence interval: 0.8479 to 0.9932), sensitivity of 92.00%, and specificity of 91.55%. Above all, the MFB assay established here is simple, low-cost, and universal and has great potential for applications in the identification of ARGs.

A low-cost, low-input method establishment for m6A MeRIP-seq.

N6-methyladenosine (m6A) is a highly prevalent modification found in mammal mRNA molecules that plays a crucial role in the regulation of cellular function. m6A RNA immunoprecipitation sequencing (MeRIP-seq) has been frequently used in transcriptomics research to identify the location of m6A. MABE572 (Millipore) is the most widely utilized and efficient anti-m6A antibody for MeRIP-seq. However, due to the high dose and price of this antibody, which has also been taken off the market, we discovered that CST's anti-m6A antibody can be used instead of MABE572 to map the m6A transcriptome. In the present study, we performed different concentrations of the CST anti-m6A antibodies with the corresponding initiation RNA of HEK293T cells, 2.5 µg antibody with 1 µg total RNA, 1.25 µg antibody with 0.5 µg total RNA, and 1.25 µg antibody with 0.1 µg total RNA. By comparing the m6A peak calling, enriched motifs, alternative splicing events, and nuclear transcripts modified by m6A between the CST and Millipore libraries, it was found that the CST library presented similar data to Millipore, even at incredibly low doses. The volume and cost of antibodies are significantly reduced by this refined MeRIP-seq using CST antibody, making it convenient to map future large-scale sample m6A methylation.

Extended culture may contribute to poor intellectual performance of children born after frozen embryo transfer.

Frozen embryo transfer (FET) is becoming popular in recent years. However, whether embryos freezing or other factors may affect intellectual performance in offspring is still unknown. We compared the Wechsler Intelligence Scale for Children Fourth Edition (WISC-IV) questionnaire scores between children born after fresh embryo transfer (fresh ET) and FET. They were matched in a 1:1 ratio on their sex and age (±1 month). 326 children were included in each group. We found children born after FET scored lower on the WISC-IV questionnaire (p = 0.002). In subgroup analysis, the full-scale scores are similar between fresh ET and FET in the cleavage-stage transfer group (p = 0.57). In the FET group, the blastocyst-stage transfer group had lower full-scale scores compared with the cleavage-stage transfer group (p = 0.004). Children born after FET scored lower on WISC-IV questionnaire might be linked to extended culture of embryos rather than the freezing process.

Characterization of an α-Amylase from the Honeybee Chalk Brood Pathogen Ascosphaera apis.

The insect pathogenic fungus, Ascosphaera apis, is the causative agent of honeybee chalk brood disease. Amylases are secreted by many plant pathogenic fungi to access host nutrients through the metabolism of starch, and the identification of new amylases can have important biotechnological applications. Production of amylase by A. apis in submerged culture was optimized using the response surface method (RSM). Media composition was modeled using Box-Behnken design (BBD) at three levels of three variables, and the model was experimentally validated to predict amylase activity (R2 = 0.9528). Amylase activity was highest (45.28 ± 1.16 U/mL, mean ± SE) in media composed of 46 g/L maltose and1.51 g/L CaCl2 at a pH of 6.6, where total activity was ~11-fold greater as compared to standard basal media. The enzyme was purified to homogeneity with a 2.5% yield and 14-fold purification. The purified enzyme had a molecular weight of 75 kDa and was thermostable and active in a broad pH range (> 80% activity at a pH range of 7-10), with optimal activity at 55 °C and pH = 7.5. Kinetic analyses revealed a Km of 6.22 mmol/L and a Vmax of 4.21 µmol/mL·min using soluble starch as the substrate. Activity was significantly stimulated by Fe2+ and completely inhibited by Cu2+, Mn2+, and Ba2+ (10 mM). Ethanol and chloroform (10% v/v) also caused significant levels of inhibition. The purified amylase essentially exhibited activity only on hydrolyzed soluble starch, producing mainly glucose and maltose, indicating that it is an endo-amylase (α-amylase). Amylase activity peaked at 99.38 U/mL fermented in a 3.7 L-bioreactor (2.15-fold greater than what was observed in flask cultures). These data provide a strategy for optimizing the production of enzymes from fungi and provide insight into the α-amylase of A. apis.

Novel filter-press single-step cleanup approach facilitated rapid screening and accurate quantification of 112 veterinary drugs in aquatic products.

In this study, a novel filter-press cleanup column was developed as a single-step cleanup approach for the rapid screening and quantification of 112 veterinary drugs in fish samples. Fish muscle samples were extracted with acetonitrile and ethyl acetate, sequentially. After concentration and reconstitution, N-propylethylenediamine (PSA) sorbent, packed in filter-press column, allows rapid single-step cleanup operation, while UHPLC-Q-Orbitrap-HRMS provides high-precision mass information in multi-residue screening. Under optimum settings, the detection and quantification limits were validated at 0.5 and 2.0 µg·kg-1, for all analytes, respectively. The ranges of recoveries were from 35.3 to 138.4%. Most of these target analytes (82%) could be measured with recoveries between 60 and 130%, and intra-day RSDs ranging from 1.9 to 26.1%. This method was further applied to evaluate the residual of veterinary drugs in fish samples from four cities in China, and results demonstrated its practicability for multi-residue monitoring veterinary residues for food safety administration.