Ethanol exposure exacerbates 4-nitroquinoline-1-oxide induced esophageal carcinogenesis and induces invasive carcinoma with muscularis propria infiltration in a mouse model.

Esophageal squamous cell carcinoma (ESCC) is one of the most fatal cancers worldwide. Most ESCC patients are diagnosed at an advanced stage; however, current research on in vivo animal models accurately reflecting their clinical presentation is lacking. Alcohol consumption is a major risk factor for ESCC and has been used in several disease models for disease induction. In this study, we used 4-nitroquinoline-1-oxide in combination with ethanol to induce an in vivo ESCC mouse model. Esophageal tissues were stained with hematoxylin and eosin for histopathological examination and lesion scoring. In cellular experiments, cell adhesion and migration invasion ability were observed using phalloidin staining, cell scratch and transwell assays, respectively, and the expression of epithelial-mesenchymal transition-related markers was detected using quantitative reverse transcription polymerase chain reaction and western blotting. The results showed that ethanol-exposed mice lost more weight and had an increased number of esophageal nodules. Histological examination revealed that the lesion scores of the ethanol-exposed esophageal samples were significantly higher than those of the unexposed esophageal samples. Furthermore, ethanol-exposed esophageal cancer samples had more severe lesions with infiltration of tumor cells into the muscularis propria. In vitro cellular experiments showed that ethanol exposure induced cytoskeletal microfilament formation, promoted cell migration invasion elevated the expression of N-cadherin and Snail, and decreased the expression of E-cadherin. In conclusion, ethanol exposure exacerbates ESCC, promotes tumor cell infiltration into the muscularis propria, and could be an effective agent for establishing innovative models of invasive carcinoma.

Hydrogen peroxide is required for light-induced stomatal opening across different plant species.

Stomatal movement is vital for plants to exchange gases and adaption to terrestrial habitats, which is regulated by environmental and phytohormonal signals. Here, we demonstrate that hydrogen peroxide (H2O2) is required for light-induced stomatal opening. H2O2 accumulates specifically in guard cells even when plants are under unstressed conditions. Reducing H2O2 content through chemical treatments or genetic manipulations results in impaired stomatal opening in response to light. This phenomenon is observed across different plant species, including lycopodium, fern, and monocotyledonous wheat. Additionally, we show that H2O2 induces the nuclear localization of KIN10 protein, the catalytic subunit of plant energy sensor SnRK1. The nuclear-localized KIN10 interacts with and phosphorylates the bZIP transcription factor bZIP30, leading to the formation of a heterodimer between bZIP30 and BRASSINAZOLE-RESISTANT1 (BZR1), the master regulator of brassinosteroid signaling. This heterodimer complex activates the expression of amylase, which enables guard cell starch degradation and promotes stomatal opening. Overall, these findings suggest that H2O2 plays a critical role in light-induced stomatal opening across different plant species.

Personalized Nanovaccines Enhance Lymph Node Accumulation and Reprogram the Tumor Microenvironment for Improved Photodynamic Immunotherapy.

Tumor immunotherapy has emerged as an efficacious therapeutic approach that mobilizes the patient's immune system to achieve durable tumor suppression. Here, we design a photodynamic therapy-motivated nanovaccine (Dex-HDL/ALA-Fe3O4) co-delivering 5-aminolevulinic acid and Fe3O4 nanozyme that demonstrate a long-term durable immunotherapy strategy. After vaccination, the nanovaccine exhibits obvious tumor site accumulation, lymph node homing, and specific and memory antitumor immunity evocation. Upon laser irradiation, Dex-HDL/ALA-Fe3O4 effectively generates reactive oxygen species at the tumor site not only to induce the immunogenic cell death-cascade but also to trigger the on-demand release of full types of tumor antigens. Intriguingly, Fe3O4 nanozyme-catalyzed hydrogen peroxide generated oxygen for alleviating tumor hypoxia and modifying the inhibitory tumor microenvironment, thereby exhibiting remarkable potential as a sensitizer. The intravenous administration of nanovaccines in diverse preclinical cancer models has demonstrated remarkable tumor regression and inhibition of postoperative tumor recurrence and metastasis, thereby enabling personalized treatment strategies against highly heterogeneous tumors.

Fabrication of MnO2 coating on aluminum honeycomb for fast catalytic decomposition of ozone at room temperature.

Herein, the coating of MnO2 nanomaterials on the surface of aluminum honeycomb was carried out to meet the requirements of high air velocity, low pressure drop and high activity in ozone removal scenarios. A commercially readily available waterborne silica sol mixed with waterborne acrylate latex was creatively utilized as the binder. A series of coating samples were prepared by spray coating method and evaluated focusing on their adhesion strength and catalytic activity towards ozone decomposition in an air duct at room temperature, by varying MnO2/binder mass ratio and number of sprayings. It was found that the adhesion strength of the catalytic coatings on the aluminum honeycomb increased with the increase of binder mass ratio, but the increased binder made the catalyst particles closely packed, resulting in reduced exposure of active sites and decrease of ozone conversion. Accordingly, catalyst slurry with 81.8 wt.% MnO2 in dry coating and spraying times of two were determined as the optimal process parameters. As-prepared aluminum honeycomb filter with MnO2 layer of 50 µm thickness achieved ozone conversion of 29.3%±1.7% under conditions of air velocity 3.0 m/sec, relative humidity ∼50%, room temperature (26°C) and initial ozone concentration of 200 ppbV. This filter can be well adaptable to indoor air purification equipment operating at high air velocity with low wind resistance.

Improving the Mechanical Properties and Tribological Behavior of Sulfobetaine Polyurethane Based on Hydrophobic Chains to Be Applied as Artificial Meniscus.

In the context of meniscus reconstruction in knee joints, current bulk biomaterials fail to meet the clinical demands for both excellent mechanical strength and low coefficient of friction. In this research, zwitterionic polyurethanes (PUs) with varying sulfobetaine (SB) groups were synthesized as the potential materials for artificial meniscus to investigate the relationship between the structures of SB groups and the performances of PUs. Under the saturation condition of 3 mg/mL hyaluronic acid aqueous solution, PU with long-alkyl chains and SB groups (PU-hSB4) exhibited a good tensile modulus (111.5 MPa) because the hydrophobic interaction of carbon chains was able to maintain the ordered aggregations of hard segment domains. Interestingly, hydrophobic chains in the molecular chain could also improve the tribological performance of PU-hSB4 instead of resulting from the surface roughness of samples, the components of lubricants, and the counterface of samples. A thicker and relatively stable hydration layer of noncrystal water was formed on the surface of PU-hSB4, which exhibited superior resistance to external forces compared to other PUs. Even if the hydration layer was damaged, PU-hSB4 was able to resist the compression of cartilage due to its high surface modulus, thus maintaining a similar and stable coefficient of friction (0.15-0.16) to native meniscus (0.18) and excellent wear resistance. In addition, the low cytotoxicity of PU-hSB4 further demonstrated its great potential to be applied in artificial meniscus instead.

Immune Exosomes Loading Self-Assembled Nanomicelles Traverse the Blood-Brain Barrier for Chemo-immunotherapy against Glioblastoma.

Effective drug delivery and prevention of postoperative recurrence are significant challenges for current glioblastoma (GBM) treatment. Poor drug delivery is mainly due to the presence of the blood-brain barrier (BBB), and postoperative recurrence is primarily due to the resistance of GBM cells to chemotherapeutic drugs and the presence of an immunosuppressive microenvironment. Herein, a biomimetic nanodrug delivery platform based on endogenous exosomes that could efficiently target the brain without targeting modifications and co-deliver pure drug nanomicelles and immune adjuvants for safe and efficient chemo-immunotherapy against GBM is prepared. Inspired by the self-assembly technology of small molecules, tanshinone IIA (TanIIA) and glycyrrhizic acid (GL), which are the inhibitors of signal transducers and activators of transcription 3 from traditional Chinese medicine (TCM), self-assembled to form TanIIA-GL nanomicelles (TGM). Endogenous serum exosomes are selected to coat the pure drug nanomicelles, and the CpG oligonucleotides, agonists of Toll-like receptor 9, are anchored on the exosome membrane to obtain immune exosomes loaded with TCM self-assembled nanomicelles (CpG-EXO/TGM). Our results demonstrate that CpG-EXO/TGM can bind free transferrin in blood, prolong blood circulation, and maintain intact structures when traversing the BBB and targeting GBM cells. In the GBM microenvironment, the strong anti-GBM effect of CpG-EXO/TGM is mainly attributed to two factors: (i) highly efficient uptake by GBM cells and sufficient intracellular release of drugs to induce apoptosis and (ii) stimulation of dendritic cell maturation and induction of tumor-associated macrophages polarization by CpG oligonucleotides to generate anti-GBM immune responses. Further research found that CpG-EXO/TGM can not only produce better efficacy in combination with temozolomide but also prevent a postoperative recurrence.

Sensitive electrochemical detection of A549 exosomes based on DNA/ferrocene-modified single-walled carbon nanotube complex.

Exosome is an emerging tumor marker, whose concentration level can reflect the occurrence and development of tumors. The development of rapid and sensitive exosome detection platform is of great significance for early warning of cancer occurrence. Here, a strategy for electrochemical detection of A549-cell-derived exosomes was established based on DNA/ferrocene-modified single-walled carbon nanotube complex (DNA/SWCNT-Fc). DNA/SWCNT-Fc complexes function as a signal amplification platform to promote electron transfer between electrochemical signal molecules and electrodes, thereby improving sensitivity. At the same time, the exosomes can be attached to DNA/SWCNT-Fc nanocomposites via the established PO43--Ti4+-PO43- method. Moreover, the application of EGFR antibody, which can specifically capture A549 exosomes, could improve the accuracy of this sensing system. Under optimal experimental conditions, the biosensor showed good linear relationship between the peak current and the logarithm of exosomes concentration from 4.66 × 106 to 9.32 × 109 exosomes/mL with a detection limit of 9.38 × 104 exosomes/mL. Furthermore, this strategy provides high selectivity for exosomes of different cancer cells, which can be applied to the detection of exosomes in serum samples. Thus, owing to its advantages of high sensitivity and good selectivity, this method provides a diversified platform for exosomes identification and has great potential in early diagnosis and biomedical applications.

HOP1 and HOP2 are involved in salt tolerance by facilitating the brassinosteroid-related nucleo-cytoplasmic partitioning of the HSP90-BIN2 complex.

The co-chaperone heat shock protein (HSP)70-HSP90 organizing protein (HOP) is involved in plant thermotolerance. However, its function in plant salinity tolerance was not yet studied. We found that Arabidopsis HOP1 and HOP2 play critical roles in salt tolerance by affecting the nucleo-cytoplasmic partitioning of HSP90 and brassinosteroid-insensitive 2 (BIN2). A hop1/2 double mutant was hypersensitive to salt-stress. Interestingly, this sensitivity was remedied by exogenous brassinolide application, while the application of brassinazole impeded growth of both wild-type (WT) and hop1/2 plants under normal and salt stress conditions. This suggested that the insufficient brassinosteroid (BR) content was responsible for the salt-sensitivity of hop1/2. After WT was transferred to salt stress conditions, HOP1/2, BIN2 and HSP90 accumulated in the nucleus, brassinazole-resistant 1 (BZR1) was phosphorylated and accumulated in the cytoplasm, and BR content significantly increased. This initial response resulted in dephosphorylation of BZR1 and BR response. This dynamic regulation of BR content was impeded in salt-stressed hop1/2. Thus, we propose that HOP1 and HOP2 are involved in salt tolerance by affecting BR signalling.

In situ real-time investigation of Staphylococcus aureus on hemisphere-patterned polyurethane films.

Surface patterning is a promising approach to prevent bacterial adhesion and biofilm formation without the concerns of antimicrobial resistance. To determine the parameters of a patterned surface that can affect bacterial behavior, a sphere-like coccus (Staphylococcus aureus) was investigated on a series of polyurethane films with ordered hemisphere patterns. The bacterial retention data in a growth medium indicated that the surface patterns significantly decreased bacterial adhesion and proliferation. The most notable effects were observed with the 2 µm-pattern as well as the patterned polycaprolactone and polystyrene films, and the accessible contact area of the polyurethane films, surface wettability, and spatial confinement, did not show an influence. An optical microscope with a modified incubation cell was used for in situ real-time observations of bacterial colonization, proliferation, and migration. Based on appropriate statistical analyses, it was concluded that topographical geometry played a dominant role. In combination with the retention assessment in a nongrowth medium, it was found that pattern-mediated inhibition of biofilm formation was mainly achieved by affecting bacterial proliferation rather than adhesion. This study provides new insight for designing biofilm-resistant biomimetic materials.

Preparation and structural properties of starch phosphate modified by alkaline phosphatase.

In this study, a method for the synthesis of starch phosphate using the transferase properties of alkaline phosphatase was explored. Maize starch was treated with a pyrophosphate solution containing alkaline phosphatase and catalytic ions under pH 8 at 37 °C. The synthesis of starch phosphate was evaluated and compared with untreated and treated starch controls. The phosphorus content of the samples increased up to 8500% with the catalytic ion concentration, whereas the peak viscosity by up to 41.4% decreased. The crystallinity and enthalpy of the phosphorylated samples were reduced by up to 26.8% and 23.3%, respectively; however, no significant was observed by Fourier-transform infrared spectrometer. The roughness of the starch surface and the distribution of elemental phosphorus were observed by scanning electron microscopy and energy dispersive Spectrometry. X-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry results further indicated the grafting of the phosphate radical.

TOR promotes guard cell starch degradation by regulating the activity of ß-AMYLASE1 in Arabidopsis.

Starch is the main energy storage carbohydrate in plants and serves as an essential carbon storage molecule for plant metabolism and growth under changing environmental conditions. The TARGET of RAPAMYCIN (TOR) kinase is an evolutionarily conserved master regulator that integrates energy, nutrient, hormone, and stress signaling to regulate growth in all eukaryotes. Here, we demonstrate that TOR promotes guard cell starch degradation and induces stomatal opening in Arabidopsis thaliana. Starvation caused by plants growing under short photoperiod or low light photon irradiance, as well as inactivation of TOR, impaired guard cell starch degradation and stomatal opening. Sugar and TOR induce the accumulation of ß-AMYLASE1 (BAM1), which is responsible for starch degradation in guard cells. The plant steroid hormone brassinosteroid and transcription factor BRASSINAZOLE-RESISTANT1 play crucial roles in sugar-promoted expression of BAM1. Furthermore, sugar supply induced BAM1 accumulation, but TOR inactivation led to BAM1 degradation, and the effects of TOR inactivation on BAM1 degradation were abolished by the inhibition of autophagy and proteasome pathways or by phospho-mimicking mutation of BAM1 at serine-31. Such regulation of BAM1 activity by sugar-TOR signaling allows carbon availability to regulate guard cell starch metabolism and stomatal movement, ensuring optimal photosynthesis efficiency of plants.

Characterization the structural property and degradation behavior of corn starch in KOH/thiourea aqueous solution.

Finding an efficient and eco-friendly solution for starch dissolution has attracted considerable attentions in recent years. This study investigated the structural characteristics, and degradation behavior of corn starch in KOH/thiourea aqueous solution by the comparison with DMSO/LiBr and 1-allyl-3-methylimidazolium chloride (AMIMCl). Results showed that KOH/thiourea solution was an effective solvent for corn starch dissolution (30 min with 97.01% solubility). X-ray diffraction (XRD) and 13C CP-MAS NMR spectroscopy revealed that native crystallinity of the corn starch was altered by all tested solvents, especially DMSO/LiBr and AMIMCl. Conversely, this new solvent did not change the primary molecular structure, chain-length distribution, or thermal stability of starch, compared with the native starch. Furthermore, KOH/thiourea solution was more suitable for measuring the molecular weight of corn starch, with a weight-average molecular weight (Mw) of 7.18 × 107 g/mol. Therefore, KOH/thiourea solution is a promising novel solvent for starch dissolution and structural exploration.

Dual signal amplification based on polysaccharide-initiated ring-opening polymerization and click polymerization for exosomes detection.

Exosomes, as a biomarker with enhancing tumor invasion and spread, play an essential role for lung cancer diagnosis, therapy, and prognosis. In this work, a novel electrochemical sensor was fabricated for detecting exosomes secreted by lung cancer cells based on polysaccharide-initiated ring-opening polymerization (ROP) and click polymerization. First, MPA formed a self-assembled monolayer on the gold electrode surface, and then anti-EGFR was immobilized on the electrode surface by amide bond. Subsequently, a lot of phosphate groups were introduced by the specific recognition between anti-EGFR and exosomes, then sodium alginate grafted Glycidyl propargyl ether (SA-g-GPE) prepared via ROP was attached to the exosomes through PO43-Zr4+-COOH coordination bond. After that, click polymerization was initiated by alkyne groups on the SA-g-GPE polymerization chain to realize highly sensitive detection of A549 exosomes. Under the optimum conditions, the fabricated sensor showed a good linear relationship between the logarithm of exosomes concentration and peak current in the range of 5 × 103 - 5 × 109 particles/mL, and the limit of detection (LOD) was as low as 1.49 × 102 particles/mL. In addition, this method had the advantages of high specificity, anti-interference, high sensitivity, simplicity, rapidity and green economy, which proposed a novel avenue for the detection of exosomes, and also had potential applications in early cancer diagnosis and biomedicine.

Quantum dot-labelled antibody based on fluorescence immunoassays for the determination of arsanilic acid in edible pork and liver.

Arsanilic acid (ASA) residue, which is the most common contaminant in edible animal tissues such as pork and liver, has caused environmental and food-safety concerns. In this study, direct and indirect competitive fluorescence-linked immunosorbent assays (dc-FLISA and ic-FLISA) incorporating quantum dots (QDs) as the fluorescent label were developed for the first time to detect ASA residues in edible pork and animal liver. Monoclonal antibodies against ASA and rabbit anti-mouse antibody were conjugated to orange QDs with excitation wavelengths at 450 nm, and the QD-Abs served as detection probes. The limits of detection for dc-FLISA and ic-FLISA were 0.11 ng/mL and 0.001 ng/mL, respectively. QD-FLISA was used to analyse spiked samples; recoveries ranged from 80.2%-91.2% in dc-FLISA and 82.5%-91.2% in ic-FLISA, and the coefficients of variations (CV) were less than 12%. Compared with conventional indirect competitive enzyme-linked immunosorbent assay (ic-ELISA), the QD-FLISA described here was more sensitive and accurate in the analysis of ASA residues in animal tissues. Moreover, the results of QD-FLISA correlated well with HPLC. These results indicate that dc-FLISA and ic-FLISA are sensitive and reliable for detection of ASA residues in edible animal tissues.

Correction: On-demand removable hydrogels based on photolabile cross-linkings as wound dressing materials.

Correction for 'On-demand removable hydrogels based on photolabile cross-linkings as wound dressing materials' by Haiyang Wu et al., J. Mater. Chem. B, 2019, 7, 5669-5676, DOI: 10.1039/C9TB01544B.

Soluble expression and purification of Bluetongue Virus Type 1 (BTV1) structure protein VP2 in Escherichia coli and its immunogenicity in mice.

BACKGROUND: The VP2 on the surface of the virus particle is the main structural protein of BTV, which can induce the host to produce neutralizing antibodies and play an important role in the antiviral immunity process. This study aimed to obtain the soluble VP2 and analyze its immunogenicity. METHODS: The gene encoding the full-length VP2 of BTV1 was amplified by PCR. The products from restriction enzyme digestion and ligase reaction between VP2 and vector pET-28a were transformed into E.coli DH5α. After PCR and sequencing detection, the positive plasmid PET28a-VP2 was transformed into E.coli BL21(DE3) and Rosetta(DE3) competent cells, expression induced by IPTG. The fusion protein was expressed in the optimized conditions with the induction of IPTG, purified by affinity chromatography and identified by SDS-PAGE and Western blotting. A total of 5 Balb/c mice aged 6-8 weeks were immunized with the fusion protein at a dose of 30 µg per mouse. Each mouse was immunized three times at an interval of 3 weeks. RESULTS: The recombinant plasmid PET28a-VP2 was successfully constructed. The expression strains were induced by 0.4 mmol/L IPTG at 16 °C for 10 h, and BTV1 VP2 was expressed in a soluble form. The purity of the recombinant VP2 protein (∼109 kDa) was about 90% in the concentration at 0.2 mg/ml afterpurification. The purified VP2 had good immunoreactivity with BTV1 positive serum. Taken together, thisstudy offered a route for producing soluble BTV VP2, which retains activity and immunogenicity, to bebeneficial to the research on developing BTV vaccine, and lay the foundation for further research on BTV.

Small diameter blood vessels with controllable micropore structure induced by centrifugal force for improved endothelialization.

The micropore structure is prerequisite for fast and durable endothelialization of artificial small diameter blood vessels (ASDBVs). Although some methods, such as salt leaching, coagulation, and electrospinning, have been developed to construct micropores for ASDBVs, the uncontrollability of the structure and the complicated procedures of the process are still the issues to be concerned about. In this study, a compact device based on the principle of centrifugal force is established and used to prepare polyurethane (PU) ASDBVs with micropore structures by blasting different porogens. It is found that the glass beads could construct micropores with regular round shape, uniform distribution, and controllable size (60-350 µm), which significantly improves the endothelialization of PU-based ASDBVs, especially when the pore size is about 60 µm. This method is easy-accessible and wide-applicable, which provides a new pathway for the research and development of ASDBVs.

Perfluorosulfonic acid polymer based eATRP for ultrasensitive detection of CYFRA21-1 DNA.

The sensitive detection of biomarker cytokeratin fragment antigen 21-1 (CYFRA21-1) is crucial for early diagnosis and screening of non-small cell lung cancer (NSCLC). In this work, an electrochemical biosensor based on Nafion-initiated eATRP has been built for ultrasensitive detection of CYFRA21-1 DNA for the first time. Specifically, peptide nucleic acid (PNA) probes are immobilized onto a gold electrode surface and then hybridized with target DNA to form PNA/DNA heteroduplexes for the subsequent attachment of Nafion by the identified carboxyl-Zr4+-phosphoric acid chemistry. Finally, polymer chains are obtained by linking the monomer of ferrocenylmethyl methacrylate to the PNA/MCH/DNA/Zr4+/Nafion probes via eATRP. Under optimized steady-state conditions, the sensor offers a wide current response for CYFRA21-1 DNA from 10-11 to 10-16 M with a detection limit of 6.42 × 10-17 M. The proposed method of using Nafion as the eATRP initiator exhibits high sensitivity, reproducibility and stability and is a promising strategy for early diagnosis of NSCLC.

Electrochemical CYFRA21-1 DNA sensor with PCR-like sensitivity based on AgNPs and cascade polymerization.

In this work, a new method of CYFRA21-1 DNA (tDNA) detection based on electrochemically mediated atom transfer radical polymerization (e-ATRP) and surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) cascade polymerization and AgNP deposition is proposed. Firstly, the peptide nucleic acid (PNA) probe is captured on a gold electrode by Au-S bonds for specific recognition of tDNA. After hybridization, PNA/DNA strands provide high-density phosphate groups for the subsequent ATRP initiator by the identified carboxylate-Zr4+-phosphate chemistry. Then, a large number of monomers are successfully grafted from the DNA through the e-ATRP reaction. After that, the chain transfer agent of SI-RAFT and methacrylic acid (MAA) are connected by recognized carboxylate-Zr4+-carboxylate chemistry. Subsequently, through SI-RAFT, the resulting polymer introduces numerous aldehyde groups, which could deposit many AgNPs on tDNA through silver mirror reaction, causing significant amplification of the electrochemical signal. Under optimal conditions, this designed method exhibits a low detection limit of 0.487 aM. Moreover, the method enables us to detect DNA at the level of PCR-like and shows high selectivity and strong anti-interference ability in the presence of serum. It suggests that this new sensing signal amplification technology exhibits excellent potential of application in the early diagnosis of non-small cell lung cancer (NSCLC). Graphical abstract Electrochemical detection principle for CYFRA21-1 DNA based on e-ATRP and SI-RAFT signal amplification technology.