Mental health concerns during pregnancy associated with the risk of preterm birth: A retrospective cohort study.

BACKGROUNDS: There are multiple risk factors for preterm birth (PTB), one of the most important of which is mood disorders during pregnancy. We aimed to comprehensively investigate the association of both total mental health concerns and ten specific psychiatric symptoms with PTB risk. METHODS: A cohort study was performed consisting of 25,175 pregnant women who participated in Women and Children's Hospital of Chongqing Medical University between 2020 and 2022. The Symptom Checklist 90 (SCL-90) was utilized to assess the psychiatric symptoms. Multivariable or multinomial logistic regression was applied to investigate mental health concerns associated with risk of PTB or its different clinical sub-categories, respectively. Sensitivity analyses were further performed to validate the results. RESULTS: 8336 women who met the inclusion criteria were included; of these, 547 (6.6 %) had preterm deliveries, and 2542 (30.5 %) had mental health concerns. Compared with women with healthy minds, women with total mental health concerns had a 29.0 % higher risk of overall PTB (OR = 1.28, 95%CI = 1.07-1.54), medical-induced PTB (OR = 1.49, 95%CI = 1.05-2.13) and spontaneous PTB with premature rupture of membranes (OR = 1.33, 95%CI = 1.01-1.74). As to the specific psychological symptoms, hostility pregnant women had a 55.0 % higher risk of PTB (OR = 1.55, 95%CI = 1.14-2.11). Similar results were observed in most of the sensitivity analyses. LIMITATIONS: This is a single-center study, thus the extrapolation of the results may be limited. CONCLUSIONS: Pregnant women with mental health symptoms, especially hostility, have an increased risk of PTB. The findings underscore that integrating mental health services into routine maternal care may be a strategy to prevent PTB.

Impact of childhood maltreatment on aging: a comprehensive Mendelian randomization analysis of multiple age-related biomarkers.

BACKGROUND: Childhood maltreatment (CM) is linked to long-term adverse health outcomes, including accelerated biological aging and cognitive decline. This study investigates the relationship between CM and various aging biomarkers: telomere length, facial aging, intrinsic epigenetic age acceleration (IEAA), GrimAge, HannumAge, PhenoAge, frailty index, and cognitive performance. METHODS: We conducted a Mendelian randomization (MR) study using published GWAS summary statistics. Aging biomarkers included telomere length (qPCR), facial aging (subjective evaluation), and epigenetic age markers (HannumAge, IEAA, GrimAge, PhenoAge). The frailty index was calculated from clinical assessments, and cognitive performance was evaluated with standardized tests. Analyses included Inverse-Variance Weighted (IVW), MR Egger, and Weighted Median (WM) methods, adjusted for multiple comparisons. RESULTS: CM was significantly associated with shorter telomere length (IVW: ß = - 0.1, 95% CI - 0.18 to - 0.02, pFDR = 0.032) and increased HannumAge (IVW: ß = 1.33, 95% CI 0.36 to 2.3, pFDR = 0.028), GrimAge (IVW: ß = 1.19, 95% CI 0.19 to 2.2, pFDR = 0.040), and PhenoAge (IVW: ß = 1.4, 95% CI 0.12 to 2.68, pFDR = 0.053). A significant association was also found with the frailty index (IVW: ß = 0.31, 95% CI 0.13 to 0.49, pFDR = 0.006). No significant associations were found with facial aging, IEAA, or cognitive performance. CONCLUSIONS: CM is linked to accelerated biological aging, shown by shorter telomere length and increased epigenetic aging markers. CM was also associated with increased frailty, highlighting the need for early interventions to mitigate long-term effects. Further research should explore mechanisms and prevention strategies.

The roles of knitted mesh-reinforced collagen-chitosan hybrid scaffold in the one-step repair of full-thickness skin defects in rats.

Full-thickness skin defects represent a significant and urgent clinical problem. Dermal substitutes serving as a regenerative template to induce dermal reconstruction provide a promising method to treat serious skin defects. Although collagen-chitosan dermal scaffolds display good biocompatibility and a suitable porous structure for angiogenesis and tissue regeneration, their poor mechanical properties compromise their application. To develop a well-supported dermal substitute, a poly(l-lactide-co-glycolide) (PLGA) knitted mesh was fabricated and integrated with collagen-chitosan scaffold (CCS) to obtain a PLGA knitted mesh-reinforced CCS (PLGAm/CCS). The morphology of this PLGAm/CCS was investigated in vitro. To characterize the tissue response, specifically angiogenesis and tissue regeneration, the PLGAm/CCS was transplanted in combination with thin split-thickness autografts to repair full-thickness skin wounds using a one-step surgical procedure in Sprague-Dawley rats. These results were then compared with CCSs. At weeks 2, 4 and 8 after the operation, the healing wounds were imaged to analyse wound changes, and tissue specimens were harvested for histology, immunohistochemistry, real-time quantitative polymerase chain reaction and Western blot analysis. The results demonstrated that collagen-chitosan sponge in the PLGAm/CCS remained porous, interconnected and occupied the openings of PLGA mesh, and the incorporation of the PLGA knitted mesh into CCS improved the mechanical strength with little influence on its mean pore size and porosity. Following transplantation, PLGAm/CCS inhibited wound contraction, and effectively promoted neotissue formation and blood vessel ingrowth. In conclusion, the mechanical strength of the scaffolds plays an important role in the process of tissue regeneration and vascularization. The ability of PLGAm/CCS to promote angiogenesis and induce in situ tissue regeneration demonstrates its potential in skin tissue engineering.

A survey of diabetic foot patients with hospitalized amputations performed in a medical center over 5 years in China: limitations and lessons learnt.

To perform a retrospective survey of the clinical features and clinical courses of diabetic foot patients with amputations hospitalized in the Second Affiliated Hospital of Zhejiang University from 2007 to 2011. According to the database from the medical records department in our hospital 36 cases of diabetic patients were selected out of 805 cases of amputees. The clinical information was recorded in detail. With the contact information provided in the medical record, telephone interviews were conducted for each patient and their family to complete the record for the current disease progression and the patient's treatment process. Among all of the patients with hospitalized amputations, 36/805(4.47%) were diabetic foot patients with amputations, accounting for 36/273(13.19%) of non-traumatic amputations. The average age of the diabetic patients with first-time amputations was 62 years, the average BMI was greater than 24.5 kg/m(2), and the waist-to-hip ratio was greater than 0.92. Among the 22 patients who completed the follow-up interviews, 17 had only small amputations. Diabetic amputation has become a common clinical problem. The patients were mainly elderly, overweight or obese. Amputations at the toe level still accounted for a large proportion of the patients. Overall, the follow-up interviews indicated that the patients lacked good understanding of and concern for their own disease, with unclear control of blood sugar and no standardized control method. Helping the patients to understand the disease and paying attention to health education may play a role in the prevention and treatment of diabetes and diabetic foot disease.

The progress of silver nanoparticles in the antibacterial mechanism, clinical application and cytotoxicity.

Nanotechnology is a highly promising field, with nanoparticles produced and utilized in a wide range of commercial products. Silver nanoparticles (AgNPs) has been widely used in clothing, electronics, bio-sensing, the food industry, paints, sunscreens, cosmetics and medical devices, all of which increase human exposure and thus the potential risk related to their short- and long-term toxicity. Many studies indicate that AgNPs are toxic to human health. Interestingly, the majority of these studies focus on the interaction of the nano-silver particle with single cells, indicating that AgNPs have the potential to induce the genes associated with cell cycle progression, DNA damage and mitochondrial associated apoptosis. AgNPs administered through any method were subsequently detected in blood and were found to cause deposition in several organs. There are very few studies in rats and mice involving the in vivo bio-distribution and toxicity, organ accumulation and degradation, and the possible adverse effects and toxicity in vivo are only slowly being recognized. In the present review, we summarize the current data associated with the increased medical usage of nano-silver and its related nano-materials, compare the mechanism of antibiosis and discuss the proper application of nano-silver particles.

Fabrication and characterization of poly(L-lactide-co-glycolide) knitted mesh-reinforced collagen-chitosan hybrid scaffolds for dermal tissue engineering.

Mechanical properties are essential considerations for the design of porous scaffolds in the field of tissue engineering. To develop a well-supported hybrid dermal substitute, poly(L-lactide-co-glycolide) (PLGA) yarns were knitted into a mesh with relative fixed loops, followed by incorporation into collagen-chitosan scaffolds (CCS) to obtain PLGA knitted mesh-reinforced CCS (PLGAm/CCS). The morphology and tensile strength in both the dry and wet state of PLGAm/CCS were investigated in vitro. To characterize the tissue response, specifically angiogenesis and tissue regeneration, PLGAm/CCS was embedded subcutaneously in Sprague-Dawley rats and compared with two control implants, i.e., PLGA mesh (PLGAm) and CCS. At weeks 1, 2, and 4 post surgery, tissue specimens were harvested for histology, immunohistochemistry, real-time quantitative PCR and Western blot analysis. These results demonstrated that the incorporation of PLGA knitted mesh into CCS can improve the mechanical strength with little influence on its mean pore size and porosity. After implantation, PLGAm/CCS can resist contraction and promote cell infiltration, neotissue formation, and blood vessel ingrowth, effectively. In conclusion, the mechanical strength of scaffolds can play a synergetic role in tissue regeneration and vascularization by maintaining its 3D microstructure. The ability of PLGAm/CCS to promote angiogenesis and induce in situ tissue formation demonstrates its strong potential in the field of skin tissue engineering.

[Vascularization of poly-lactic-co-glycolic acid knitted mesh/collagen-chitosan hybrid scaffold].

OBJECTIVE: To investigate the effects of poly-lactic-co-glycolic acid (PLGA) knitted mesh/collagen-chitosan hybrid scaffold (PCCS) on angiogenesis, and to explore the relative mechanisms. METHODS: PLGA knitted mesh was integrated into collagen-chitosan scaffold (CCS) to construct PCCS with freeze-lyophilizing method, and CCS was made with the same method. The characteristics of morphology and water absorbing capacity among PCCS, PLGA knitted mesh, and CCS were compared in vitro. PCCS and CCS was respectively implanted into subcutaneous tissue of back on both sides in 24 SD rats, and the tissue specimens were harvested at post operation week (POW) 1, 2, and 4 according to the random number table to evaluate the level of angiogenesis by histopathological and immunohistochemical examinations. The expression levels of alpha smooth muscle actin (alpha-SMA) and vascular endothelial growth factor (VEGF) mRNA were examined by real-time quantitative RT-PCR. Data were processed with t test. RESULTS: (1) PLGA knitted mesh was closely integrated with sponge of collagen-chitosan in PCCS, and the porous structure of PCCS was similar to that of CCS. (2) Compared with that of PCCS [(506 +/- 15)%], the water absorbing rate of CCS and PLGA knitted mesh was respectively increased and decreased [(627 +/- 21)%, (195 +/- 15)%, with t value respectively 3.8, 11.9, P < 0.05 or P < 0.001]. (3) The scaffolds were filled with newly formed tissue in CCS at POW 4, while those in PCCS were observed at POW 2 with more homogeneous and abundant collagen. (4) Blood vessels could be induced, and they grew into scaffolds along with prolongation of implantation time in PCCS and CCS. The number of mature blood vessels in PCCS at POW 1, 2, 4 [(10.7 +/- 3.2), (18.6 +/- 2.1), and (30.3 +/- 4.5) branches per square centimeter] was respectively higher than that in CCS [(5.4 +/- 0.9), (10.8 +/- 4.2), and (23.6 +/- 1.7) branches per square centimeter, with t value respectively 4.6, 4.4, 4.5, P values all below 0.01]. (5) The expression levels of alpha-SMA and VEGF mRNA in PCCS at POW 1, 2, 4 were significantly higher than those in the CCS (with t(alpha-SMA) value respectively 1.26, 1.63, 2.17, with t(VEGF) value respectively 5.52, 2.07, 1.78, P values all below 0.01). CONCLUSIONS: PCCS is able to induce the ingrowth of blood vessels rapidly and promote their maturity. The mechanical properties and microstructures of scaffolds play synergistic role in the process of angiogenesis.

[Design and biological evaluation of poly-lactic-co-glycolic acid (PLGA) mesh/collagen-chitosan hybrid scaffold (CCS) as a dermal substitute].

OBJECTIVE: To design and construct a kind of dermal regeneration template with mesh, and to preliminarily evaluate its biological characteristics. METHODS: PLGA mesh was integrated into CCS with freeze-drying method for constructing PLGA mesh/CCS composite (PCCS). The micromorphologies and mechanical properties among PLGA mesh, CCS, and PCCS were compared. PCCS and CCS was respectively implanted into subcutaneous tissue of SD rats (PCCS and CCS groups, 9 rats in each group). The tissue samples were collected at post operation week (POW) 1, 2, and 4 for histopathological and immunohistochemical observation. Protein levels of CD68, MPO, IL-1beta, IL-10 were examined by Western blot, with expression of gray value. Data were processed with one-way analysis of variance and t test. RESULTS: Three-dimensional porous structure of PCCS was similar to that of CCS. Mechanical property of PLGA mesh and PCCS was respectively (3.07 +/- 0.10), (3.26 +/- 0.15) MPa, and they were higher than that of CCS [(0.42 +/- 0.21) MPa, F = 592.3, P < 0.0001)]. The scaffolds were filled with newly formed tissue in PCCS group at POW 2, while those in CCS group were observed at POW 4. A large accumulation of macrophages was observed in both groups, especially at POW 2, and more macrophage infiltration was observed in CCS group. The protein level of IL-10 in PCCS group at POW 2 was obviously higher than that in CCS group, while the protein levels of CD68, MPO, IL-1beta were significantly decreased as compared with those in CCS group (with t value from -4.06 to 2.89, P < 0.05 or P < 0.01). CONCLUSIONS: PCCS has excellent mechanical property with appropriate three-dimensional porous structure. Meanwhile, it can rapidly induce formation of new tissue and vascularization, and it has a prospect of serving as a dermal substitute.