Developing fibrin-based biomaterials/scaffolds in tissue engineering.

Tissue engineering technology has advanced rapidly in recent years, offering opportunities to construct biologically active tissues or organ substitutes to repair or even enhance the functions of diseased tissues and organs. Tissue-engineered scaffolds rebuild the extracellular microenvironment by mimicking the extracellular matrix. Fibrin-based scaffolds possess numerous advantages, including hemostasis, high biocompatibility, and good degradability. Fibrin scaffolds provide an initial matrix that facilitates cell migration, differentiation, proliferation, and adhesion, and also play a critical role in cell-matrix interactions. Fibrin scaffolds are now widely recognized as a key component in tissue engineering, where they can facilitate tissue and organ defect repair. This review introduces the properties of fibrin, including its composition, structure, and biology. In addition, the modification and cross-linking modes of fibrin are discussed, along with various forms commonly used in tissue engineering. We also describe the biofunctionalization of fibrin. This review provides a detailed overview of the use and applications of fibrin in skin, bone, and nervous tissues, and provides novel insights into future research directions for clinical treatment.

High-Performance Bimetallic Electrocatalysts for Hydrogen Evolution Reaction Using N-Doped Graphene-Supported N-Co6Mo6C.

Hydrogen has garnered considerable attention as a promising energy source for addressing contemporary environmental degradation and energy scarcity challenges. Electrocatalytic water splitting for hydrogen production has emerged as an environmentally friendly and versatile method, offering high purity. However, the development of cost-effective electrocatalytic catalysts using abundant and inexpensive materials is crucial. In this study, we successfully synthesized nitrogen-doped Co6Mo6C supported on nitrogen-doped graphene (N-Co6Mo6C/NC). The catalyst exhibited high performance and durability in alkaline electrolytes (1.0 M KOH) for hydrogen evolution, showcasing an overpotential of 185 mV at a current density of 100 mA cm-2 and a Tafel slope of 80 mV dec-1. These findings present a novel avenue for the fabrication of efficient bimetallic carbide catalysts.

Tailoring biomaterials for skin anti-aging.

Skin aging is the phenomenon of degenerative changes in the structure and function of skin tissues over time and is manifested by a gradual loss of skin elasticity and firmness, an increased number of wrinkles, and hyperpigmentation. Skin anti-aging refers to a reduction in the skin aging phenomenon through medical cosmetic technologies. In recent years, new biomaterials have been continuously developed for improving the appearance of the skin through mechanical tissue filling, regulating collagen synthesis and degradation, inhibiting pigmentation, and repairing the skin barrier. This review summarizes the mechanisms associated with skin aging, describes the biomaterials that are commonly used in medical aesthetics and their possible modes of action, and discusses the application strategies of biomaterials in this area. Moreover, the synergistic effects of such biomaterials and other active ingredients, such as stem cells, exosomes, growth factors, and antioxidants, on tissue regeneration and anti-aging are evaluated. Finally, the possible challenges and development prospects of biomaterials in the field of anti-aging are discussed, and novel ideas for future innovations in this area are summarized.

Yttria-Stabilized Zirconia Composite Coating as Barrier to Reduce Hydrogen Permeation into Steel.

Hydrogen atoms can enter into metallic materials through penetration and diffusion, leading to the degradation of the mechanical properties of the materials, and the application of hydrogen barrier coatings is an effective means to alleviate this problem. Zirconia coatings (ZrO2) have been widely studied as a common hydrogen barrier coating, but zirconia undergoes a crystalline transition with temperature change, which can lead to volumetric changes in the coating and thus cause problems such as cracking and peeling of the coating. In this work, ZrO2 coating was prepared on a Q235 matrix using a sol-gel method, while yttria-stabilized zirconia (YSZ) coatings with different contents of rare earth elements were prepared in order to alleviate a series of problems caused by the crystal form transformation of ZrO2. The coating performances were evaluated by the electrochemical hydrogen penetration test, pencil hardness test, scratch test, and high-temperature oxidation test. The results show that yttrium can improve the stability of the high-temperature phase of ZrO2, alleviating the cracking problem of the coating due to the volume change triggered by the crystalline transition; improve the consistency of the coating; and refine the grain size of the oxide. The performance of YSZ coating was strongly influenced by the yttria doping mass, and the coating with 10 wt% yttria doping had the best hydrogen barrier performance, the best antioxidant performance, and the largest adhesion. Compared with the matrix, the steady-state hydrogen current density of the YSZ coating decreased by 72.3%, the antioxidant performance was improved by 65.8%, and the ZrO2 coating hardness and adhesion levels were B and 4B, respectively, while YSZ coating hardness and adhesion were upgraded to 2H and 5B. With the further increase in yttrium doping mass, the hardness of the coating continued to improve, but the defects of the coating increased, resulting in a decrease in the hydrogen barrier performance, antioxidant performance, and adhesion. In this work, the various performances of ZrO2 coating were significantly improved by doping with the rare earth element, which provides a reference for further development and application of oxide coatings.

Amorphous bismuth and GO co-doped WO3 electrochromic film with fast-switching time and long-term stability.

The sol-gel process for fabricating electrochromic thin films is straightforward, offering advantages such as low cost and ease of compositional control. Herein we prepared GO-Bi-WO3 films with improved electrochromic performance using a simple sol-gel spin-coating method. The sample shows a fast-switching time (1.8 s for coloring and 1.8 s for bleaching), large optical modulation (85% at 630 nm), excellent stability (86.4% retention after 10 200 cycles), and high coloration efficiency (65.9 cm2 C-1). This work indicates the electrochromic performance of WO3-based films can be enhanced by incorporating GO, which provides an effective strategy for the rapid, safe, and efficient fabrication of electrochromic thin films.

Green fabrication of ultrafine N-MoxC/CoP hybrids for boosting electrocatalytic water reduction.

Developing non-noble-metal electrocatalysts for hydrogen evolution reactions with high activity and stability is the key issue in green hydrogen generation based on electrolytic water splitting. It has been recognized that the stacking of large CoP particles limits the intrinsic activity of as-synthesized CoP catalyst for hydrogen evolution reaction. In the present study, N-MoxC/CoP-0.5 with excellent electrocatalytic activity for hydrogen evolution reaction was prepared using N-MoxC as decoration. A reasonable overpotential of 106 mV (at 10 mA cm-2) and a Tafel slope of 59 mV dec-1in 1.0 M KOH solution was achieved with N-MoxC/CoP-0.5 electrocatalyst, which exhibits superior activity even after working for 37 h. Uniformly distributed ultrafine nanoclusters of the N-MoxC/CoP-0.5 hybrids could provide sufficient interfaces for enhanced charge transfer. The effective capacity of the hydrogen evolution reaction could be preserved in the complex, and the enlarged electrocatalytic surface area could be expected to offer more active sites for the reaction.

Temperature Effects on Electrochemical Energy-Storage Materials: A Case Study of Yttrium Niobate Porous Microspheres.

Lithium-ion batteries (LIBs) are very popular electrochemical energy-storage devices. However, their applications in extreme environments are hindered because their low- and high-temperature electrochemical performance is currently unsatisfactory. In order to build all-climate LIBs, it is highly desirable to fully understand the underlying temperature effects on electrode materials. Here, based on a novel porous-microspherical yttrium niobate (Y0.5 Nb24.5 O62 ) model material, this work demonstrates that the operation temperature plays vital roles in electrolyte decomposition on electrode-material surfaces, electrochemical kinetics, and crystal-structure evolution. When the operation temperature increases, the reaction between the electrolyte and the electrode material become more intensive, causing the formation of thicker solid electrolyte interface (SEI) films, which decreases the initial Coulombic efficiency. Meanwhile, the electrochemical kinetics becomes faster, leading to the larger reversible capacity, higher rate capability, and more suitable working potential (i.e., lower working potential for anodes and higher working potential for cathodes). Additionally, the maximum unit-cell-volume change becomes larger, resulting in poorer cyclic stability. The insight gains here can provide a universal guide for the exploration of all-climate electrode materials and their modification methods.

Sodium Niobate with a Large Interlayer Spacing: A Fast-Charging, Long-Life, and Low-Temperature Friendly Lithium-Storage Material.

Niobate Li+ -storage anode materials with shear ReO3 crystal structures have attracted intensive attention due to their inherent safety and large capacities. However, they generally suffer from limited rate performance, cyclic stability, and temperature adaptability, which are rooted in their insufficient interlayer spacings. Here, sodium niobate (NaNb13 O33 ) micron-sized particles are developed as a new anode material owning the largest interlayer spacing among the known shear ReO3 -type niobates. The large interlayer spacing of NaNb13 O33 enables very fast Li+ diffusivity, remarkably contributing to its superior rate performance with a 2500 to 125 mA g-1 capacity percentage of 63.2%. Moreover, its large interlayer spacing increases the volume-accommodation capability during lithiation, allowing small unit-cell-volume variations (maximum 6.02%), which leads to its outstanding cyclic stability with 87.9% capacity retention after as long as 5000 cycles at 2500 mA g-1 . Its cyclic stability is the best in the research field of niobate micron-sized particles, and comparable to that of "zero-strain" Li4 Ti5 O12 . At a low temperature of -10 °C, it also exhibits high rate performance with a 1250 to 125 mA g-1 capacity percentage of 65.6%, and even better cyclic stability with 105.4% capacity retention after 5000 cycles at 1250 mA g-1 . These comprehensively good electrochemical results pave the way for the practical application of NaNb13 O33 in high-performance Li+ storage.

The intuitive decision preference and EEG features based on commonality heuristic.

People tend to make intuitive decisions based on certain heuristics. We have observed that there is an intuitive heuristic that tends to prioritize the most common features as the selection result. In order to study the influence of cognitive limitation and context induction on the intuitive thinking of common items, a questionnaire experiment with multidisciplinary features and similarity associations is designed. The experimental results reveal the existence of three classes of subjects. The behavioral features of Class I subjects show that cognitive limitations and task context fail to induce intuitive decision-making based on common items; instead, they rely heavily on rational analysis. The behavioral features of Class II subjects show a mixture of intuitive decision-making and rational analysis, with priority given to rational analysis. The behavioral features of Class III subjects indicate that the induction of the task context reinforces the reliance on intuitive decision-making. The electroencephalogram (EEG) feature responses (mainly in the ß and γ bands) of the three classes of subjects reflect their respective decision-making thinking characteristics. The event-related potential (ERP) results demonstrate that Class III subjects induce a late positive P600 component with a significantly higher average wave amplitude than the other two classes, which may be related to the "oh yes" behavior for the common item intuitive decision method.

Carbon-Coated CuNb13O33 as A New Anode Material for Lithium Storage.

Niobates are very promising anode materials for Li+-storage rooted in their good safety and high capacities. However, the exploration of niobate anode materials is still insufficient. In this work, we explore ~1 wt% carbon-coated CuNb13O33 microparticles (C-CuNb13O33) with a stable shear ReO3 structure as a new anode material to store Li+. C-CuNb13O33 delivers a safe operation potential (~1.54 V), high reversible capacity of 244 mAh g-1, and high initial-cycle Coulombic efficiency of 90.4% at 0.1C. Its fast Li+ transport is systematically confirmed through galvanostatic intermittent titration technique and cyclic voltammetry, which reveal an ultra-high average Li+ diffusion coefficient (~5 × 10-11 cm2 s-1), significantly contributing to its excellent rate capability with capacity retention of 69.4%/59.9% at 10C/20C relative to 0.5C. An in-situ XRD test is performed to analyze crystal-structural evolutions of C-CuNb13O33 during lithiation/delithiation, demonstrating its intercalation-type Li+-storage mechanism with small unit-cell-volume variations, which results in its capacity retention of 86.2%/92.3% at 10C/20C after 3000 cycles. These comprehensively good electrochemical properties indicate that C-CuNb13O33 is a practical anode material for high-performance energy-storage applications.

Novel nitrogen removal process in marine aquaculture wastewater treatment using Enteromorpha ferment liquid as carbon.

The process performance of partial denitrification of a novel anaerobic fermentation integrated fixed-film activated sludge (IFAS-AFPD) of Enteromorpha was studied. The response surface method was used to determine the optimal reaction conditions, and the operation experiment was carried out under the optimal conditions. The results showed that the nitrogen removal effect was the best when the salinity was 12.2 g•L-1, the Carbon-Nitrogen ratio (C/N) was 4, the pH was 8.5, and the Nitrite Accumulation Rate, Nitrate Removal Rate, Chemical Oxygen Demand Utilization Rate could reach 77%, 89% and 51%. Experimental results have shown that the NAR of the Enteromorpha ferment liquid system could be maintained at about 74%, which was noteworthy higher than that of the sodium acetate (CH3COONa) system at 42%; Microbial community analysis showed that Enteromorpha ferment liquid was more beneficial to the growth of Bacteroidetes than CH3COONa.

Musical Emotions Recognition Using Entropy Features and Channel Optimization Based on EEG.

The dynamic of music is an important factor to arouse emotional experience, but current research mainly uses short-term artificial stimulus materials, which cannot effectively awaken complex emotions and reflect their dynamic brain response. In this paper, we used three long-term stimulus materials with many dynamic emotions inside: the "Waltz No. 2" containing pleasure and excitement, the "No. 14 Couplets" containing excitement, briskness, and nervousness, and the first movement of "Symphony No. 5 in C minor" containing passion, relaxation, cheerfulness, and nervousness. Approximate entropy (ApEn) and sample entropy (SampEn) were applied to extract the non-linear features of electroencephalogram (EEG) signals under long-term dynamic stimulation, and the K-Nearest Neighbor (KNN) method was used to recognize emotions. Further, a supervised feature vector dimensionality reduction method was proposed. Firstly, the optimal channel set for each subject was obtained by using a particle swarm optimization (PSO) algorithm, and then the number of times to select each channel in the optimal channel set of all subjects was counted. If the number was greater than or equal to the threshold, it was a common channel suitable for all subjects. The recognition results based on the optimal channel set demonstrated that each accuracy of two categories of emotions based on "Waltz No. 2" and three categories of emotions based on "No. 14 Couplets" was generally above 80%, respectively, and the recognition accuracy of four categories based on the first movement of "Symphony No. 5 in C minor" was about 70%. The recognition accuracy based on the common channel set was about 10% lower than that based on the optimal channel set, but not much different from that based on the whole channel set. This result suggested that the common channel could basically reflect the universal features of the whole subjects while realizing feature dimension reduction. The common channels were mainly distributed in the frontal lobe, central region, parietal lobe, occipital lobe, and temporal lobe. The channel number distributed in the frontal lobe was greater than the ones in other regions, indicating that the frontal lobe was the main emotional response region. Brain region topographic map based on the common channel set showed that there were differences in entropy intensity between different brain regions of the same emotion and the same brain region of different emotions. The number of times to select each channel in the optimal channel set of all 30 subjects showed that the principal component channels representing five brain regions were Fp1/F3 in the frontal lobe, CP5 in the central region, Pz in the parietal lobe, O2 in the occipital lobe, and T8 in the temporal lobe, respectively.

Review on recent progress in WO3-based electrochromic films: preparation methods and performance enhancement strategies.

Transition metal oxides have drawn tremendous interest due to their unique physical and chemical properties. As one of the most promising electrochromic (EC) materials, tungsten trioxide (WO3) has attracted great attention due to its exceptional EC characteristics. This review summarizes the background and general concept of EC devices, and key criteria for evaluation of WO3-based EC materials. Special focus is placed on preparation techniques and performance enhancement of WO3 EC films. Specifically, four methods - nanostructuring, regulating crystallinity, fabricating hybrid films, and preparing multilayer composite structures - have been developed to enhance the EC performance of WO3 films. Finally, we offer some important recommendations and perspectives on potential research directions for further study.

Fabrication of 3D graphene anode for improving performance of miniaturized microbial fuel cells.

A three-dimensional graphene (3D GR) grown by chemical vapor deposition method was used as the anode of a miniaturized microbial fuel cell (mini-MFC), which was to be embedded in a 56-µL anode chamber for the formation of a thicker biofilm from Shewanella bacterial culture to promote high efficient extracellular electron transfer. Such 3D GR structure had fewer defects with few layers, and the framework showed significant high REDOX peak current density, high charge storage and low charge transfer resistance. Besides, the electron transport rate of 3D GR electrode was 0.0176 s-1, which was about two times faster than that of GR electrode with nickel foam substrate (GR/NF). Benefiting from the macroporous networks, high electron transfer rate and electrocatalytic activity, 3D GR anode facilitated efficient mass transfer and effective electron transport, further forming denser biofilm on the 3D GR. The maximum output voltage and power density of this mini-MFC were 820 mV and 23.8 mW/m2, which were much higher than those of the GR/NF anode at 590 mV and 12.8 mW/m2 and the bare NF anode at 450 mV and 4.6 mW/m2. The study demonstrated that 3D GR can be a promising anode material for improving MFC performance.

The Formation Mechanism of Nanocrystals after Martensitic Transformation.

Understanding the ultrafine substructure in freshly formed Fe-C martensite is the key point to reveal the real martensitic transformation mechanism. As-quenched martensite, whose transformation temperature is close to room temperature, has been investigated in detail by means of transmission electron microscopy (TEM) in this study. The observation results revealed that the freshly formed martensite after quenching is actually composed of ultrafine crystallites with a grain size of 1−2 nm. The present observation result matches well with the suggestion based on X-ray studies carried out one hundred years ago. Such nanocrystals are distributed throughout the entire martensite. The whole martensite shows a uniform contrast under both bright and dark field observation modes, irrespective of what observation directions are chosen. No defect contrast can be observed inside each nanocrystal. However, a body-centered cubic {112}<111>-type twinning relationship exists among the ultrafine α-Fe grains. Such ultrafine α-Fe grains or crystallites are the root cause of the fine microstructure formed in martensitic steels and high hardness after martensitic transformation. The formation mechanism of the ultrafine α-Fe grains in the freshly formed martensite will be discussed based on a new γ → α phase transformation mechanism.

An 18.3 MJ charging and discharging pulsed power supply system for the Space Plasma Environment Research Facility (SPERF): The integrated control subsystem.

The Space Plasma Environment Research Facility uses a coil system with the corresponding pulsed power supply (PPS) system to generate a very flexible magnetosphere-like magnetic configuration. Its purpose is to investigate the 3D asymmetric reconnection and the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration, as well as the physical mechanism of the dipolarization front in the magnetotail. The control and monitoring function of the PPS system is realized by the integrated control subsystem, which adopts a two-layer network structure of the control layer and device layer and is developed based on the Experimental Physics and Industrial Control System framework. The control layer includes a remote control system that consists of an engineer station and an operator station and the data storage system. Both the engineer station and operator station are developed by Control System Studio. The data storage system is based on the combination of the Hierarchical Data Format 5 database and MySQL database, and the data management software of the data storage system is developed based on LabVIEW. The synchronous trigger device, the safety interlocking device, the local controller of each set of PPS, and the module controller of each discharge module are the device layer. Their hardware is designed and developed based on the Field Programmable Gate Array, and their software is based on the Quartus II platform and programmed with the Verilog Hardware Description Language language. The function of the integrated control subsystem is verified by the discharge test of the PPS system.

The effect of sonication-synergistic natural deep eutectic solvents on extraction yield, structural and physicochemical properties of pectins extracted from mango peels.

In this study, eco-friendly deep eutectic solvents (DESs) were used as extracting agents for the first time in the extraction of pectins from mango peel. Two novel green solvents including betaine-citric acid (Bet-CA) and choline chloride-malic acid (ChCl-MaA) were screened, and the extraction conditions were further optimized by full factor design experimental along with RSM. In addition, ultrasound treatment also had an influence on extraction yield, structural and physicochemical properties of extracted pectins. Two DES-extracted pectins had significantly higher yield, larger molecular weight and particles size than HCl-extracted pectin. High intensity ultrasound power enhanced the yield of low-ester pectins, but decreased the molecular weight and particles size of the pectins extracted. Monosaccharide compositions analysis showed that higher content of galacturonic acid (GalA) and larger HG region were observed in two DESs-extracted pectins. Fourier transform infrared spectra (FT-IR) of all pectins extracted were similar, with slight differences. Two DESs-extracted pectins exhibited higher DE values than HCl-extracted pectin. Thermal analysis and zeta potential results showed that HCl-extracted pectin had better stability than ChCl-MaA-extracted pectin. Additionally, HCl-extracted pectin had higher viscosity properties than two DESs-extracted pectins or commercial pectin (CP). Moreover, it was found that HCl-extracted pectin was in a colloid state, while two DESs-extracted pectins or CP were in a flow state. Ultrasound treatment significantly improved the yields of pectin/low-ester pectin. Additionally, ultrasound treatment remarkably decreased the viscosity and viscoelastic properties of the pectins extracted. The results were conducive to our understanding of the relationship between extraction conditions and physicochemical properties of the pectins extracted, which provides theoretical basis for the functional application of mango peel pectins in the food and pharmaceutical industry.

Screening and identification of natural α-glucosidase and α-amylase inhibitors from partridge tea (Mallotus furetianus Muell-Arg) and in silico analysis.

Partridge leaves (Mallotus furetianus Muell-Arg.) have long been consumed as popular folk substitute tea for treating hyperglycemia in China. In this study, the inhibiting effects of partridge tea extracts on α-glucosidase and α-amylase were investigated, and then effect of partridge tea aqueous extracts (PTAEs) on glucose consumption capacity of 3 T3-L1 preadipocytes cells was determined. Results verified that PTAEs showed excellent anti-α-glucosidase and anti-α-amylase effects. In addition, the PTAEs evidently promoted glucose consumption capacity of 3T3L1 preadipocytes cells. To this end, a combined method of affinity ultrafiltration and HPLC-ESI-qTOF-MS/MS was used for rapidly screening and identifying the potential inhibitors in the PTAEs. Catechin, epicatechin, rutin, ferulic acid, and kaempferitrin with high affinity capacity indicated strong inhibiting effect on α-glucosidase and α-amylase. Docking studies revealed the potential interactive mechanisms between these major inhibitors and two digestive enzymes. This research shows that partridge tea is effective in preventing and treating post hyperglycemia.

Bio-affinity ultra-filtration combined with HPLC-ESI-qTOF-MS/MS for screening potential α-glucosidase inhibitors from Cerasus humilis (Bge.) Sok. leaf-tea and in silico analysis.

Cerasus humilis(Bge.) Sok. leaf-tea (CLT) has a potential anti-α-glucosidase effect. However, its anti-α-glucosidase functional compositions remain unclear. Results showed that 70% methanol extract of CLT (IC50 = 36.57 µg/mL) with the highest total phenolic/flavonoid contents exhibited significantly higher α-glucosidase inhibitory activity (α-GIA) than acarbose (IC50 = 189.57 µg/mL). Additionally, phenolic constituents of the CLT extract were analyzed for the first time in this work. Ten major potential α-glucosidase inhibitors (α-GIs) with high bio-affinity degree in the CLT extract were recognized using a bio-affinity ultra-filtration and HPLC-ESI-qTOF-MS/MS method. In vitro α-GIA assay confirmed that myricetin (IC50 = 36.17 µg/mL), avicularin (IC50 = 69.84 µg/mL), quercitrin, isoquercitrin, prunin and guajavarin were responsible for the α-GIA of the CLT extract. More importantly, the interaction mechanism between α-GIs and α-glucosidase was investigated via in silico analysis. This study provides a high-throughput screening platform for identification of the potential α-GIs from natural products.

An 18.3 MJ charging and discharging pulsed power supply system for the Space Plasma Environment Research Facility (SPERF): The subsystem for the magnetic perturbation coils.

The mechanism of acceleration, loss, and wave-particle interaction of energetic particles in the magnetosphere is a research content of the Space Plasma Environment Research Facility, which is being built as a user facility at the Harbin Institute of Technology in China. Two magnetic perturbation coils are used to simulate the magnetic storm distortion and excite Alfvén wave perturbation. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite the magnetic perturbation coils to generate the required amplitude and duration of the magnetic field. The two magnetic perturbation coils are the CRDI coil and CRDII coil and are excited by one set of PPSs. The PPS for the CRDI coil consists of two modules and can provide a pulsed current of no less than 132 kA at 0.12 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.7 ms. The PPS for the CRDII coil consists of five modules and can provide a pulsed current of no less than 16 kA at 0.45, 0.65, 0.8, 0.95, and 1.1 ms, and the duration of the pulsed current from the peak to 10% of the peak is no more than 4.5 ms. The detailed design of the PPSs has been discussed in this paper, and the discharge test of the PPSs is carried out to verify the design of the PPSs.