RESUMO
A fundamental understanding of the fluid flow mechanism during CH4 hydrate dissociation in nanoscale clayey sediments from the molecular perspective can provide invaluable information for macroscale natural gas hydrate (NGH) exploration. In this work, the fluid flow behaviors of the decomposed gas from CH4 hydrate within clayey nanopores under different temperature conditions are revealed by molecular dynamics (MD) simulation. The simulation results indicate that the key influencing factors of gas-water flow in nanoscale clayey sediments include the diffusion and the random migration of gas molecules. The influencing mechanisms of fluid flow in nanopores are closely related with the temperature conditions. Under a low temperature condition, the gas diffusion process is impeded by the secondary hydrate formation, leading to the decline in gas transport velocity within nanopores. However, it is still noteworthy that the gas-water fluid flow channels are not completely blocked by the occurrence of secondary hydrate. Under a high temperature condition, the significant phenomenon of water migration during gas flow is observed, which can be ascribed to the gas-liquid entrainment effect in nanopores of the clayey sediment. These results may provide valuable implications and fundamental evidence for improving gas production efficiency in future field tests of NGH exploitation in marine sediments.
RESUMO
Secondary hydrate formation or hydrate reformation poses a serious threat to the oil and gas transportation safety and natural gas hydrate exploitation efficiency. The hydrate reformation behaviors in porous media have been widely studied in large simulators due to their importance in traditional industries and new energy resources. However, it is difficult to understand the interfacial effects of hydrate reformation on the surface and in micropores of the porous media via a basic experimental apparatus. In this work, in situ X-ray computed tomography (X-CT) technology is used to detect the period, distribution, volume, and morphology characteristics of secondary hydrate formation during hydrate dissociation under depressurization, thermal stimulation, and the combined conditions. It is found that the secondary hydrate formation is inevitable under any conditions of hydrate dissociation. The secondary hydrate morphology varies among porous, grain-enveloping, grain-cementing, granular, and patchy structures, which are closely correlated to the hydrate reformation region and gas/water saturated conditions during hydrate dissociation. Accordingly, we revealed that the interfacial superheating phenomenon before hydrate dissociation could provide a supercooling condition for hydrate reformation. The gas flow along the interface of pores and inside the liquid water, as well as gas accumulation in noninterconnected pores, would exaggerate the hydrate reformation by increasing the local pore pressure. Meanwhile, the hydrate reformation aggravates the nonuniform distribution of gas hydrates in pores. In order to avoid hydrate reformation during dissociation, we further compared hydrate reformation and dissociation behaviors under three hydrate dissociation conditions. It is revealed that the combination of thermal stimulation and depressurization is an effective method for hydrate dissociation by retarding secondary hydrate formation. This study provides visual evidence and an interaction mechanism between interfacial heat and mass transfer, as well as secondary hydrate formation behaviors, which can be favorable for future quantitative research on secondary hydrate formation in different scales under various dissociation conditions.
RESUMO
Methyl-diethanolamine (CAS: 105-59-9), ethyl-diethanolamine (CAS: 139-87-7), and triethanolamine (CAS: 102-71-6) were identified as the degradation products and bio-markers of nitrogen mustard exposure. Sensitive and convenient detection methods for amino alcohol are of great importance to identify nitrogen mustard exposure in forensic analysis. Herein, analytical methods including gas chromatography-tandem mass spectrometry combined with heptafluorobutyryl derivatization and solid phase extraction were established for retrospective detection of the biomarkers in human plasma and urine samples. The efficiency of the method was improved by optimizing the conditions for sample preparation and the GC-MS/MS method. The optimization included the derivatization temperature, reaction time, reagent dosage and solid phase extraction cartridges, eluent and pH of the loading sample. The results indicated that the SCX cartridge resulted in better enrichment and purification effects, and the best recovery could be obtained with pH = 3-4 for the loading samples and an eluent of 2 mL 10% NH4OH/MeOH. The GC-MS/MS parameters were also optimized for better specificity and sensitivity. The established method was fully validated for each analyte both in plasma and urine matrixes. The linear range of analytes in plasma was 1.0-1000 ng mL-1 with a correlation parameter (R2) of ≥0.994, intra-day/inter-day accuracy of 93.7-117%, and relative standard deviation (RSD) of ≤6.5%. Meanwhile the results in urine were 1.0-1000 ng mL-1 with R2 of ≥0.996, intra-day/inter-day accuracy of 94.3-122%, and RSD of ≤6.6%. The detection limit of the analytes was 1.0 ng mL-1. The method was applied for the detection and identification of trace amino alcohols present in urine samples dispatched by the Organization for the Prohibition of Chemical Weapons (OPCW) and the results were confirmed to be correct.
RESUMO
Sulfur mustard [HD; bis-(2-chloroethyl) sulfide] and other analogues are a kind of highly toxic vesicant and have been prohibited by the Organization for the Prohibition of Chemical Weapons (OPCW) since 1997. Exposures to HD could generate several adducts in the plasma and hydrolysis products in the urine, which are widely applied as biomarkers to identify HD exposure in forensic analysis. Several methods have been developed for the detection of related biomarkers. However, most methods are based on complex derivatization, and not enough attention is paid to HD analogues. A modified and convenient analytical method reported herein includes simultaneous incubation and organic solvent extraction. The biomarkers such as thiodiglycol and 1,2-bis (2-hydroxyethylthio) are transferred to HD and 1,2-bis(2-chloroethylthio) ethane via hydrochloric acid at the appropriate temperature. The analytes are analyzed by gas chromatography tandem mass spectrometry (GC-MS/MS) with 2-chloroethyl ethyl sulfide (2-CEES) applied as the internal standard. The interday and intraday study according to FDA rules has been achieved to evaluate the accuracy and precision of the method. The two targets are detected with a good linearity (R2 > 0.99) in the concentration ranges from 5 to 1000 ng/mL and 10 to 1000 ng/mL, with small relative standard deviations (RSD ≤6.62% and RSD ≤6.93%) and favorable recoveries between 90.3 and 107.3% and between 89.4 and 108.7%, respectively. The established method can be used for retrospective detection of sulfur mustards in biological samples and successfully applied in the biomedical proficiency testing organized by the OPCW.
Assuntos
Sulfetos , Espectrometria de Massas em Tandem , Humanos , Estudos Retrospectivos , Cromatografia Gasosa-Espectrometria de Massas , Biomarcadores , EtanoRESUMO
Gas hydrate has great application potential in gas separation, energy storage, seawater desalination, etc. However, the intensity of mass and heat transfer is not enough to meet the needs of efficient hydrate synthesis. Nanoparticles, different from other liquid chemical additives, are considered as effective additives to promote hydrate formation due to their rich specific surface area and excellent thermal conductivity. This work summarizes the effect of the nanoparticles on the thermodynamics and kinetics of hydrate formation. And also, this work probes into the mechanism of the effect of the nanoparticles on the formation of hydrate as well as provides some suggestions for future research. It is found that it's difficult for nanoparticles to effectively promote the formation of the gas hydrate without the use of surfactants, because the adhesion characteristics of the nanoparticles make them easily agglomerate or even agglomerate in solution. In addition, at present, the research on the influence of nanoparticles on the formation and decomposition of natural gas hydrate is still very fragmented, and the micro mechanism of the influence is not clear, which requires more systematic and specific research in the future. At the same time, the development of nanoparticles that can promote the formation of natural gas hydrate should also become the focus of future research.
RESUMO
The serious issues of energy shortage and greenhouse gas emission have led to the development of coalbed methane (CBM) with new commercial ramifications. A hydrate-based gas separation technology is introduced to recover methane from CBM. However, the mechanism of hydrate nucleation needs to be clear for enhancing the hydrate formation rate and gas recovery efficiency. In this work, we studied, by means of in-situ Raman spectroscopy, the microscopic characterizations of hydrates forming in/around the initial gas-liquid interface in the case of CBM and tetrahydrofuran (THF). It is found that the hydrates accumulate as a film with horizontal crevices in the initial gas-liquid interface. These crevices prevent the hydrate film from hindering gas-liquid contact and limiting hydrate formation. Raman spectroscopy results illustrate that the initial gas-liquid interface shows a positive impact on water aggregation, and that the holding gas molecules stay stably with the water molecules. Nitrogen molecules encage into the cavities of THF hydrates along with methane molecules. For the interface and hydrate layer, water aggregation is evaluated by the Raman intensity ratio of hydrogen-bonded water (BW) and free water (FW) without any hydrogen bonds, abbreviated as I BW/I FW. A value of I BW/I FW higher than 0.85 can symbolize the occurrence of hydrate nucleation in the interface and help assess the hydrate formation.
RESUMO
Ricin is a type II ribosome-inactivating protein toxin consisting of A and B chains linked by one interchain disulfide bond. Because of its high toxicity depending on both chains together, confirming the presence of both A and B chains of intact ricin is required during the investigation of the illegal production and application. Here, we report a novel and sensitive acetonitrile (ACN)-assisted trypsin digestion method for unambiguous identification of intact ricin by simultaneous detection of its marker peptides from A and B chains. Marker peptides were generated with a simple procedure by direct cleaving the native ricin at 45 °C for 4 h using Promega modified sequencing grade trypsin under the assistance of 10% ACN, and then directly analyzed by ultrahigh performance liquid chromatography tandem mass spectrometry. The type of trypsin was found to be one critical factor for cleavage of intact ricin based on a significant difference in the yields of specific peptides generated while using various types of trypsin. A low content of ACN in enzymatic buffer significantly reduced the digestion time from overnight to 4 h. There was commonly a better MS response of marker peptides when using the developed ACN-assisted trypsin digestion method than methanol-assisted trypsin digestion within the same 4 h. Totally, seven specific peptides with high sensitivity and specificity including three in the A-chain (TA7, TA11, and TA10) and four in the B-chain (TB6, TB14-ss-TB16, TB20, and TB18) were obtained as good marker peptides for unambiguous identification of intact ricin. The lowest concentration of native ricin for unambiguous identification was 20 ng/mL, in which three marker peptides from both the A-chain and B-chain could be measured with a minimum of three ion transitions. Combined with affinity enrichment, the developed approach was successfully applied for the measurement of intact ricin from the complicated matrix samples of the second, third, and fourth biotoxin exercises organized by the Organisation for the Prohibition of Chemical Weapons (OPCW). This study has provided a recommended detection method combined with one novel ACN-assisted trypsin digestion with MS for forensic unambiguous confirmation of trace ricin intact with high confidence.
Assuntos
Ricina , Acetonitrilas , Cromatografia Líquida , Digestão , Peptídeos , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz , Espectrometria de Massas em Tandem , TripsinaRESUMO
The toxic protein of ricin has drawn wide attention in recent years as a potential bioterrorism agent due to its high toxicity and wide availability. For the verification of the potential anti-terrorism activities, it is urgent for the quantification of ricin in food-related matrices. Here, a novel strategy of trypsin/Glu-C tandem digestion was introduced for quantitative detection of ricin marker peptides in several beverage matrices using isotope-labeled internal standard (IS)-mass spectrometry. The ricin in beverages was captured and enriched by biotinylated anti-ricin polyclonal antibodies conjugated to streptavidin magnetic beads. The purified ricin was cleaved using the developed trypsin/Glu-C tandem digestion method and then quantitatively detected by ultra-high-pressure liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) with isotope-labeled T7A and TG11B selected as IS. The use of trypsin/Glu-C digestion allows shorter peptides, which are more suitable for MS detection, to be obtained than the use of single trypsin digestion. Under the optimized tandem digestion condition, except for T7A in the A-chain, two resulting specific peptides of TG13A, TG28A from the A-chain and two of TG11B, TG33B from the B-chain were chosen as novel marker peptides with high MS response. The uniqueness of the selected marker peptides allows for unambiguous identification of ricin among its homologous proteins in a single run. The MS response of the four novel marker peptides is increased by more than 10 times compared with that of individual corresponding tryptic peptides. Both the marker peptides of A-chain T7A and B-chain TG11B were selected as quantitative peptides based on the highest MS response among the marker peptides from their individual chains. The limit of detection (LOD) of ricin is 0.1 ng/mL in PBS and 0.5 ng/mL in either milk or orange juice. The linear range of calibration curves for ricin were 0.5-300 ng/mL in PBS, 1.0-400 ng/mL in milk, and 1.0-250 ng/mL in orange juice. The method accuracy ranged between 82.6 and 101.8% for PBS, 88.9-105.2% for milk, and 95.3-118.7% for orange juice. The intra-day and inter-day precision had relative standard deviations (%RSD) of 0.3-9.4%, 0.7-8.9%, and 0.2-6.9% in the three matrices respectively. Furthermore, whether T7A or TG11B is used as a quantitative peptide, the quantitative results of ricin are consistent. This study provides not only a practical method for the absolute quantification of ricin in beverage matrices but also a new strategy for the investigation of illegal use of ricin in chemical weapon verification tasks such as OPCW biotoxin sample analysis exercises.
Assuntos
Bebidas/análise , Cromatografia Líquida de Alta Pressão/métodos , Ricina/análise , Espectrometria de Massas em Tandem/métodos , Tripsina/análise , Biotinilação , Calibragem , Marcação por Isótopo , Limite de Detecção , Magnetismo , Peptídeos/química , Controle de Qualidade , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Solventes , Estreptavidina/análiseRESUMO
Some countries are trying to drill and exploit natural gas hydrate (NGH). However, the disturbance effects of drilling on the stability of NGH-bearing sediments are unclear. There are still few experimental apparatuses on this issue, and existing experimental apparatuses cannot comprehensively simulate the drilling process as well. In order to fill this gap in prior studies, an experimental drilling apparatus used for evaluating drilling risks related to NGH was developed. The apparatus consists of a high-pressure vessel with a drilling system, a drilling fluid injection system, a drilling fluid treatment system, and a data acquisition system. Hydrates can form in the high-pressure vessel placed inside a walk-in cold room. The drilling fluid can be cooled to the desired temperature by the drilling fluid treatment system and be injected into the drilling system by the drilling fluid injection system. The drilling system can simulate the comprehensive drilling process, including drilling feed, trip up & down operations, drilling fluid circulation, etc. 48 thermometers were inserted into the high-pressure vessel from the bottom. The thermometers uniformly distribute in the high-pressure vessel, and they could quickly and accurately measure the hydrate phase change process under high-pressure and low-temperature conditions.â¢Simulate the drilling process in hydrate-bearing sediments.â¢Evaluate the influence of drilling parameters (drilling fluid temperatures, drilling fluid circulation rates, etc.) on hydrate dissociation characteristics around the wellbore.â¢Simultaneously evaluate the heat and mass transfer process in hydrate-bearing sediments during the drilling process.
RESUMO
Organophosphorus nerve agents inhibit the cholinesterase activity by phosphylation of the active site serine. The resulting phosphylated cholinesterase and adducts on human serum albumin (HSA) are appropriate biomarkers for nerve agents exposure. Several methods have been developed for the detection of nerve agents, including fluoride reactivation or alkaline cleavage. It was previously thought that some nerve agents adducts to HSA could not be detected via fluoride regeneration. In our study, the results showed that tabun (GA) adducts of HSA could be detected by fluoride regeneration. The sample preparation included acetone precipitation, washing and SPE. Deuterated tabun (d5-GA) was applied as the internal standard. The product of regenerated fluorotabun is detected with a good linearity (R2 > 0.997) in the concentration range from 0.02 to 100.0 ng/ml, small relative standard deviation (≤6.89%) and favorable recoveries between 94.8 and 106.3%. The established preparation confirmed the fluorotabun was regenerated from the GA-HSA adducts.
Assuntos
Fluoretos/química , Técnicas de Diluição do Indicador , Organofosfatos/análise , Albumina Sérica Humana/química , Cromatografia Gasosa , Humanos , Estrutura Molecular , Espectrometria de Massas em TandemRESUMO
Both ricin and R. communisagglutinin (RCA120), belonging to the type II ribosome-inactivating proteins (RIPs-â ¡), are derived from the seeds of the castor bean plant. They share very similar amino acid sequences, but ricin is much more toxic than RCA120. It is urgently necessary to distinguish ricin and RCA120 in response to public safety. Currently, mass spectrometric assays are well established for unambiguous identification of ricin by accurate analysis of differentiated amino acid residues after trypsin digestion. However, diagnostic peptides are relatively limited for unambiguous identification of trace ricin, especially in complex matrices. Here, we demonstrate a digestion strategy of multiple proteinases to produce novel peptide markers for unambiguous identification of ricin. Liquid chromatography-high resolution MS (LC-HRMS) was used to verify the resulting peptides, among which only the peptides with uniqueness and good MS response were selected as peptide markers. Seven novel peptide markers were obtained from tandem digestion of trypsin and endoproteinase Glu-C in PBS buffer. From the chymotrypsin digestion under reduction and non-reduction conditions, eight and seven novel peptides were selected respectively. Using pepsin under pH 1~2 and proteinase K digestion, six and five peptides were selected as novel peptide markers. In conclusion, the obtained novel peptides from the established digestion methods can be recommended for the unambiguous identification of ricin during the investigation of illegal use of the toxin.
Assuntos
Peptídeos/análise , Ricina/química , Sequência de Aminoácidos , Cromatografia Líquida , Quimotripsina/química , Endopeptidase K/química , Espectrometria de Massas , Pepsina A/química , Peptídeos/química , Solventes/química , Tripsina/químicaRESUMO
Sulfur mustard (HD) reacts with human serum albumin (HSA) at Cys34 and produces a long-term biomarker of HD exposure. Here, we present a novel, sensitive, and convenient method for quantification of HD exposure by detection of HD-HSA adducts using pronase digestion, benzyl chloroformate (Cbz-Cl) derivatization, and ultra-high-pressure liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). The HSA in HD-exposed plasma in vitro was precipitated with acetone and digested (2 h, 50 °C) with pronase to form the alkylated dipeptide, S-hydroxyethylthioethyl-CysPro (HETE-CP). The HETE-CP adduct was derivatized with Cbz-Cl to generate N-carbobenzoxy HETE-CP (HETE-C(Cbz)P). The derivatized product was analyzed by UHPLC-MS/MS. HD surrogate, 2-chloroethyl ethyl sulfide (2-CEES), was introduced as a non-isotope internal standard (ISTD) instead of traditional d8-HD for quantification. The method was found to be linear between 1.00 and 200 ng/mL HD exposure (R2 > 0.998) with precision of ≤ 9.0% relative standard deviation (RSD) and accuracy ranged between 97.1 and 111%. The limit of detection (LOD) is 0.500 ng/mL (S/N~5), over 15 times lower than that of the previous method (7.95 ng/mL). Time-consuming affinity purification or solid phase extraction (SPE) is not needed in the experiment and the operation takes less than 5 h. This study provides a new strategy and useful tool for retrospective analysis of HD exposure by HETE-CP biomarker detection. Graphical abstract Flow diagram for quantification of sulfur mustard exposure by detection of HETE-CP dipeptide adduct after benzyl chloroformate derivatization using ultra-high-pressure liquid chromatography tandem mass spectrometry.
Assuntos
Substâncias para a Guerra Química/análise , Cromatografia Líquida de Alta Pressão/métodos , Gás de Mostarda/análise , Espectrometria de Massas em Tandem/métodos , Alquilação , Biomarcadores/análise , Biomarcadores/sangue , Precipitação Química , Dipeptídeos/análise , Formiatos/química , Humanos , Limite de Detecção , Pronase/química , Proteólise , Albumina Sérica Humana/análise , Extração em Fase Sólida/métodosRESUMO
Gas hydrate technology is considered as a promising technology in the fields of gas storage and transportation, gas separation and purification, seawater desalination, and phase-change thermal energy storage. However, to date, the technology is still not commercially used mainly due to the low gas hydrate formation rate and the low gas uptake. In this study, the effect of hydrate promoters on gas uptake was systematically studied and analyzed based on hydrate-based CH4 storage and CO2 capture from CO2/H2 gas mixture experiments. Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) and gas chromatography (GC) were employed to analyze the microstructures and gas compositions. The results indicate that the effect of the hydrate promoter on the gas uptake depends on the physical and chemical properties of the promoter and gas. A strong polar ionic promoter is not helpful towards obtaining the ideal gas uptake because a dense hydrate layer is easily formed at the gas-liquid interface, which hinders gas diffusion from the gas phase to the bulk solution. For a weak polar or non-polar promoter, the gas uptake depends on the dissolution characteristics among the different substances in the system. The lower the mutual solubility among the substances co-existing in the system, the higher the independence among the substances in the system; this is so that each phase has an equal chance to occupy the hydrate cages without or with small interactions, finally leading to a relatively high gas uptake.
RESUMO
The behavior of hydrate formation in porous sediment has been widely studied because of its importance in the investigation of reservoirs and in the drilling of natural gas hydrate. However, it is difficult to understand the hydrate nucleation and growth mechanism on the surface and in the nanopores of porous media by experimental and numerical simulation methods. In this work, molecular dynamics simulations of the nucleation and growth of CH4 hydrate in the presence of the surface and nanopores of clay are carried out. The molecular configurations and microstructure properties are analyzed for systems containing one H2O hydrate layer (System A), three H2O hydrate layers (System B), and six H2O hydrate layers (System C) in both clay and the bulk solution. It is found that hydrate formation is more complex in porous media than in the pure bulk solution and that there is cooperativity between hydrate growth and molecular diffusion in clay nanopores. The hydroxylated edge sites of the clay surface could serve as a source of CH4 molecules to facilitate hydrate nucleation. The diffusion velocity of molecules is influenced by the growth of the hydrate that forms a block in the throats of the clay nanopore. Comparing hydrate growth in different clay pore sizes reveals that the pore size plays an important role in hydrate growth and molecular diffusion in clay. This simulation study provides the microscopic mechanism of hydrate nucleation and growth in porous media, which can be favorable for the investigation of the formation of natural gas hydrate in sediments.
RESUMO
Abstract: A naphthalene-degrading bacterium (referred as HD-5) was isolated from the diesel-contaminated soil and was assigned to Pseudomonas aeruginosa according to 16S rDNA sequences analysis. Gene nah, which encodes naphthalene dioxygenase, was identified from strain HD-5 by PCR amplification. Different bioremediation approaches, including nature attenuation, bioaugmentation with strain Pseudomonas aeruginosa, biostimulation, and an integrated degradation by bioaugmentation and biostimulation, were evaluated for their effectiveness in the remediating soil containing 5% naphthalene. The degradation rates of naphthalene in the soil were compared among the different bioremediation approaches, the FDA and dehydrogenase activity in bioremediation process were measured, and the gene copy number of 16S rRNA and nah in soil were dynamically monitored using real-time PCR. It was shown that the naphthalene removal rate reached 71.94%, 62.22% and 83.14% in approaches of bioaugmentation (B), biostimulation(S) and integrated degradation composed of bioaugmentation and biostimulation (BS), respectively. The highest removal rate of naphthalene was achieved by using BS protocol, which also gives the highest FDA and dehydrogenase activity. The gene copy number of 16S rRNA and nah in soil increased by about 2.67 x 10(11) g(-1) and 8.67 x 10(8) g(-1) after 31 days treatment using BS protocol. Above-mentioned results also demonstrated that the screened bacterium, Pseudomonas aeruginosa, could grow well in naphthalene-contaminated soil and effectively degrade naphthalene, which is of fundamental importance for bioremediation of naphthalene-contaminated soil.
Assuntos
Naftalenos/metabolismo , Pseudomonas aeruginosa/metabolismo , Microbiologia do Solo , Poluentes do Solo/metabolismo , Biodegradação Ambiental , Pseudomonas aeruginosa/isolamento & purificação , Solo/químicaRESUMO
The excess Helmholtz free energy functional for associating hard sphere fluid is formulated by using a modified fundamental measure theory [Y. X. Yu and J. Z. Wu, J. Chem. Phys. 117, 10156 (2002)]. Within the framework of density functional theory, the thermodynamic properties including phase equilibria for both molecules and monomers, equilibrium plate-fluid interfacial tensions and isotherms of excess adsorption, average molecule density, average monomer density, and plate-fluid interfacial tension for four-site associating hard sphere fluids confined in slit pores are investigated. The phase equilibria inside the hard slit pores and attractive slit pores are determined according to the requirement that temperature, chemical potential, and grand potential in coexistence phases should be equal and the plate-fluid interfacial tensions at equilibrium states are predicted consequently. The influences of association energy, fluid-solid interaction, and pore width on phase equilibria and equilibrium plate-fluid interfacial tensions are discussed.
RESUMO
The NICA (nonideal competitive adsorption)-Donnan model is employed to describe the interactions between Cu2+, Pb2+, Cd2+, Mn2+, and Fe3+ ions and the lignins extracted from wheat bran (lignocellulosic substrate, LS) and from kraft pulp (residual kraft lignin, RKL), and between Cu2+, Mn2+, and Fe3+ ions and wood fibers from kraft pulps. The charge of the LS and the fiber charge need to be obtained from potentiometric titration data for the LS, and by use of Donnan equilibrium, mass balance, and electroneutrality equations for the kraft fiber. The proton binding parameters for the LS and the kraft fiber, the total site densities (Qmax,1 and Qmax,2), the median protonation constants (K1 and K2), and nonideality-generic heterogeneity parameters (m1 and m2) (subscripts 1 and 2 refer to the carboxyl and phenolic functional groups) are obtained by fitting these charge data. With the above proton parameters, the interactions between metal ions and the lignins (LS and RKL)/kraft fibers are calculated, and the metal binding parameters are obtained. These parameters are the binding constants of metal i (K(i,1) and K(i,2)), ion-specific nonideality parameters (n(i,1) and n(i,2)), and intrinsic heterogeneity parameters (p1 and p2). p1 and p2 are the same for all metal ions binding to a specific sorbent. Here, p1 and p2 values obtained by fitting the binding data of a specific metal ion are used directly in binding calculations for other metal ions, and do not need to be fitted. By use of the above parameters for single metal ion binding, the binding relationship between a mixed metal ion and lignocellulosic substrate/kraft fiber can be predicted.