Rapid pulmonary 129Xe ventilation MRI of discharged COVID-19 patients with zigzag sampling.

PURPOSE: To demonstrate the feasibility of zigzag sampling for 3D rapid hyperpolarized 129Xe ventilation MRI in human. METHODS: Zigzag sampling in one direction was combined with gradient-recalled echo sequence (GRE-zigzag-Y) to acquire hyperpolarized 129Xe ventilation images. Image quality was compared with a balanced SSFP (bSSFP) sequence with the same spatial resolution for 12 healthy volunteers (HVs). For another 8 HVs and 9 discharged coronavirus disease 2019 subjects, isotropic resolution 129Xe ventilation images were acquired using zigzag sampling in two directions through GRE-zigzag-YZ. 129Xe ventilation defect percent (VDP) was quantified for GRE-zigzag-YZ and bSSFP acquisitions. Relationships and agreement between these VDP measurements were evaluated using Pearson correlation coefficient (r) and Bland-Altman analysis. RESULTS: For 12 HVs, GRE-zigzag-Y and bSSFP required 2.2 s and 10.5 s, respectively, to acquire 129Xe images with a spatial resolution of 3.96 × 3.96 × 10.5 mm3. Structural similarity index, mean absolute error, and Dice similarity coefficient between the two sets of images and ventilated lung regions were 0.85 ± 0.03, 0.0015 ± 0.0001, and 0.91 ± 0.02, respectively. For another 8 HVs and 9 coronavirus disease 2019 subjects, 129Xe images with a nominal spatial resolution of 2.5 × 2.5 × 2.5 mm3 were acquired within 5.5 s per subject using GRE-zigzag-YZ. VDP provided by GRE-zigzag-YZ was strongly correlated (R2 = 0.93, p < 0.0001) with that generated by bSSFP with minimal biases (bias = -0.005%, 95% limit-of-agreement = [-0.414%, 0.424%]). CONCLUSION: Zigzag sampling combined with GRE sequence provides a way for rapid 129Xe ventilation imaging.

A retrospective study of an irradiation-based conditioning regimen and chidamide maintenance therapy in T-ALL/LBL.

OBJECTIVES: T-cell acute lymphoblastic leukemia/lymphoblastic lymphoma (T-ALL/LBL) are highly malignant and aggressive hematologic tumors for which there is no standard first-line treatment. Chidamide, a novel histone deacetylase inhibitor, shows great promise. We assessed the efficacy and safety of an irradiation-containing conditioning regimen for allogeneic hematopoietic stem cell transplantation (allo-HSCT) and post-transplantation chidamide maintenance in patients with T-ALL/LBL. METHODS: We retrospectively analyzed the clinical data of six patients with T-ALL/LBL who underwent allo-HSCT with a radiotherapy-containing pretreatment regimen and post-transplant chidamide maintenance therapy. The endpoints were relapse, graft-versus-host disease (GVHD), transplant-related mortality (TRM), progression-free survival (PFS), overall survival (OS), and adverse events (AEs). RESULTS: All of the patients had uneventful post-transplant hematopoietic reconstitution, and all achieved complete molecular remission within 30 days. All six patients survived, and two relapsed with a median relapse time of 828.5 (170-1335) days. The 1-year OS rate was 100%, the 2-year PFS rate was 66.7%, and the TRM rate was 0%. After transplantation, two patients developed grade I-II acute GVHD (2/6); grade III-IV acute and chronic GVHD were not observed. The most common AEs following chidamide administration were hematological AEs, which occurred to varying degrees in all patients; liver function abnormalities occurred in two patients (grade 2), and symptoms of malaise occurred in one patient (grade 1). CONCLUSION: Chidamide maintenance therapy after T-ALL/LBL transplantation is safe, but the efficacy needs to be further investigated.

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications.

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

Highly reversible zinc metal anode enabled by strong Brønsted acid and hydrophobic interfacial chemistry.

Uncontrollable zinc (Zn) plating and hydrogen evolution greatly undermine Zn anode reversibility. Previous electrolyte designs focus on suppressing H2O reactivity, however, the accumulation of alkaline byproducts during battery calendar aging and cycling still deteriorates the battery performance. Here, we present a direct strategy to tackle such problems using a strong Brønsted acid, bis(trifluoromethanesulfonyl)imide (HTFSI), as the electrolyte additive. This approach reformulates battery interfacial chemistry on both electrodes, suppresses continuous corrosion reactions and promotes uniform Zn deposition. The enrichment of hydrophobic TFSI- anions at the Zn|electrolyte interface creates an H2O-deficient micro-environment, thus inhibiting Zn corrosion reactions and inducing a ZnS-rich interphase. This highly acidic electrolyte demonstrates high Zn plating/stripping Coulombic efficiency up to 99.7% at 1 mA cm-2 ( > 99.8% under higher current density and areal capacity). Additionally, Zn | |ZnV6O9 full cells exhibit a high capacity retention of 76.8% after 2000 cycles.

Origami-inspired highly stretchable and breathable 3D wearable sensors for in-situ and online monitoring of plant growth and microclimate.

The emerging wearable plant sensors demonstrate the capability of in-situ measurement of physiological and micro-environmental information of plants. However, the stretchability and breathability of current wearable plant sensors are restricted mainly due to their 2D planar structures, which interfere with plant growth and development. Here, origami-inspired 3D wearable sensors have been developed for plant growth and microclimate monitoring. Unlike 2D counterparts, the 3D sensors demonstrate theoretically infinitely high stretchability and breathability derived from the structure rather than the material. They are adjusted to 100% and 111.55 mg cm-2·h-1 in the optimized design. In addition to stretchability and breathability, the structural parameters are also used to control the strain distribution of the 3D sensors to enhance sensitivity and minimize interference. After integrating with corresponding sensing materials, electrodes, data acquisition and transmission circuits, and a mobile App, a miniaturized sensing system is produced with the capability of in-situ and online monitoring of plant elongation and microclimate. As a demonstration, the 3D sensors are worn on pumpkin leaves, which can accurately monitor the leaf elongation and microclimate with negligible hindrance to plant growth. Finally, the effects of the microclimate on the plant growth is resolved by analyzing the monitored data. This study would significantly promote the development of wearable plant sensors and their applications in the fields of plant phenomics, plant-environment interface, and smart agriculture.

Tumor microenvironment reprogramming combined with immunogenic enhancement by nanoemulsions potentiates immunotherapy.

The combination of immune checkpoint inhibitors and immunogenic cell death (ICD) inducers has become a promising strategy for the treatment of various cancers. However, its efficacy remains unmet because of the dense stroma and defective vasculatures in the tumor microenvironment (TME) that restricts the intratumoral infiltration of cytotoxic T lymphocytes (CTLs). Herein, cancer-associated fibroblasts (CAFs)-targeted nanoemulsions are tailored to combine the ICD induction and the TME reprogramming to sensitize checkpoint blockade immunotherapy. Melittin, as an ICD inducer and an antifibrotic agent, is efficiently encapsulated into the nanoemulsion accompanied by a nitric oxide donor to improve its bioavailability and tumor targeting. The nanoemulsions exhibited dual functionality by directly inducing direct cancer cell death and enhancing the tumoral immunogenicity, while also synergistically reprogramming the TME through reversing the activated CAFs, decreasing collagen deposition and restoring tumor vessels. Consequently, these nanemulsions successfully facilitated the CTLs infiltration and suppressing the recruitment of immunosuppressive cells. A combination of AE-MGNPs and anti-CTLA-4 antibody greatly elicited a striking level of antitumor T-cell response to suppress tumor growth in CAFs-rich colorectal tumor models. Our work emphasized the integration of the ICD induction with simultaneous modulation of the TME to enhance the sensitivity of patients to checkpoint blockade immunotherapy.

Radical Cation Salts of Hetera-Buckybowls: Polar Crystals, Negative Thermal Expansion and Phase Transition.

Radical cation salts of π-conjugated polycycles are rich in physical properties. Herein, two kinds of hetera-buckybowls, ethoxy-substituted trithiasumanene (3SEt) and triselenasumanene (3SeEt), are synthesized as electron donors. Galvanostatic oxidation of them affords radical cation salts (3SEt)5 (TTFMPB)3 , (3SeEt)5 (TTFMPB)3 , (3SEt)4 PMA, and (3SeEt)4 PMA, where PMA is Keggin-type phosphomolybdate and TTFMPB is tetrakis[3,5-bis(trifluoromethyl)-phenyl]borate. In these salts, 3SEt/3SeEt are partially charged and show distinct conformation change with the site charge and counter anions. In TTFMPB salts, (TTFMPB)- forms hexagonal channels that accommodate the packing columns of 3SEt/3SeEt. In particular, (3SEt)5 (TTFMPB)3 adopts the R3c space group and is a polar crystal with the columns of 3SEt all in the up-bowl direction. The PMA salts of 3SEt/3SeEt are polar crystals (C2 space group) with 3SEt/3SeEt being planar and forming columnar stacks. (3SeEt)4 PMA shows a structural modulation below 200 K, namely, negative thermal expansion (NTE) of the unit cell volume and enlargement of the intermolecular distances between neighboring 3SeEt molecules. The four salts are semiconductors with an activation energy of 0.18-0.38 eV. The conductivity of (3SeEt)4 PMA shows a reversible transition upon cooling and heating, in accordance to the NTE structural modulation. This work paves the way toward conducting materials based on hetera-buckybowls.

Gerhardtite as a Precursor to an Efficient CO-to-Acetate Electroreduction Catalyst.

Carbon-carbon coupling electrochemistry on a conventional copper (Cu) catalyst still undergoes low selectivity among many different multicarbon (C2+) chemicals, posing a grand challenge to achieve a single C2+ product. Here, we demonstrate a laser irradiation synthesis of a gerhardtite mineral, Cu2(OH)3NO3, as a catalyst precursor to make a Cu catalyst with abundant stacking faults under reducing conditions. Such structural perturbation modulates electronic microenvironments of Cu, leading to improved d-electron back-donation to the antibonding orbital of *CO intermediates and thus strengthening *CO adsorption. With increased *CO coverage on the defect-rich Cu, we report an acetate selectivity of 56 ± 2% (compared to 31 ± 1% for conventional Cu) and a partial current density of 222 ± 7 mA per square centimeter in CO electroreduction. When run at 400 mA per square centimeter for 40 h in a flow reactor, this catalyst produces 68.3 mmol of acetate throughout. This work highlights the value of a Cu-containing mineral phase in accessing suitable structures for improved selectivity to a single desired C2+ product.

A Personalized and Smart Flowerpot Enabled by 3D Printing and Cloud Technology for Ornamental Horticulture.

This paper presents a personalized and smart flowerpot for ornamental horticulture, integrating 3D printing and cloud technology to address existing design limitations and enable real-time monitoring of environmental parameters in plant cultivation. While 3D printing and cloud technology have seen widespread adoption across industries, their combined application in agriculture, particularly in ornamental horticulture, remains relatively unexplored. To bridge this gap, we developed a flowerpot that maximizes space utilization, simplicity, personalization, and aesthetic appeal. The shell was fabricated using fused deposition modeling (FDM) in 3D printing, and an Arduino-based control framework with sensors was implemented to monitor critical growth factors such as soil moisture, temperature, humidity, and light intensity. Real-time data are transmitted to the Bamfa Cloud through Wi-Fi, and a mobile application provides users with instant access to data and control over watering and lighting adjustments. Our results demonstrate the effectiveness of the smart flowerpot in enabling automated monitoring of plant growth and environmental control. This innovation holds significant promise for advancing smart device development in ornamental horticulture and other related fields, enhancing efficiency, plant health, and overall user experience. Future research in this area has the potential to revolutionize horticultural practices and contribute to the advancement of smart agriculture.

Boosting the Photocatalysis of Plasmonic Au-Cu Nanocatalyst by AuCu-TiO2 Interface Derived from O2 Plasma Treatment.

Plasmonic gold (Au) and Au-based nanocatalysts have received significant attention over the past few decades due to their unique visible light (VL) photocatalytic features for a wide variety of chemical reactions in the fields of environmental protection. However, improving their VL photocatalytic activity via a rational design is prevalently regarded as a grand challenge. Herein we boosted the VL photocatalysis of the TiO2-supported Au-Cu nanocatalyst by applying O2 plasma to treat this bimetallic plasmonic nanocatalyst. We found that O2 plasma treatment led to a strong interaction between the Au and Cu species compared with conventional calcination treatment. This interaction controlled the size of plasmonic metallic nanoparticles and also contributed to the construction of AuCu-TiO2 interfacial sites by forming AuCu alloy nanoparticles, which, thus, enabled the plasmonic Au-Cu nanocatalyst to reduce the Schottky barrier height and create numbers of highly active interfacial sites. The catalyst's characterizations and density functional theory (DFT) calculations demonstrated that boosted VL photocatalytic activity over O2 plasma treated Au-Cu/TiO2 nanocatalyst arose from the favorable transfer of hot electrons and a low barrier for the reaction between CO and O with the construction of large numbers of AuCu-TiO2 interfacial sites. This work provides an efficient approach for the rational design and development of highly active plasmonic Au and Au-based nanocatalysts and deepens our understanding of their role in VL photocatalytic reactions.

Identification of quantitative trait loci and candidate genes for seed folate content in soybean.

KEY MESSAGE: From 61 QTL mapped, a stable QTL cluster of 992 kb was discovered on chromosome 5 for folate content and a putative candidate gene, Glyma.05G237500, was identified. Folate (vitamin B9) is one of the most essential micronutrients whose deficiencies lead to various health defects in humans. Herein, we mapped the quantitative trait loci (QTL) underlying seed folate content in soybean using recombinant inbred lines developed from cultivars, ZH35 and ZH13, across four environments. We identified 61 QTL on 12 chromosomes through composite interval mapping, with phenotypic variance values ranging from 1.68 to 24.68%. A major-effect QTL cluster (qFo-05) was found on chromosome 5, spanning 992 kb and containing 134 genes. Through gene annotation and single-locus haplotyping analysis of qFo-05 in a natural soybean population, we identified seven candidate genes significantly associated with 5MTHF and total folate content in multiple environments. RNA-seq analysis showed a unique expression pattern of a hemerythrin RING zinc finger gene, Glyma.05G237500, between both parental cultivars during seed development, which suggest the gene might regulate folate content in soybean. This is the first study to investigate QTL underlying folate content in soybean and provides new insight for molecular breeding to improve folate content in soybean.

The clinical application of ultrasound for acute kidney injury during sepsis-from macroscopic to microscopic renal perfusion perspectives.

OBJECTIVE: The aim was to quantify macroscopic renal blood flow and renal cortical microcirculation in patients with septic acute kidney injury (AKI) using ultrasound and contrast-enhanced ultrasound. METHODS: In this case-control study, patients in the intensive care unit diagnosed with septic AKI were divided into stages 1-3 based on the 2012 KDIGO (Kidney Disease: Improving Global Outcomes) AKI diagnostic criteria. The patients were categorized into mild (stage 1) and severe (stages 2 and 3) groups, while septic patients without AKI served as the control group. Ultrasound parameters such as macrovascular renal blood flow and time-averaged velocity, as well as cardiac function parameters such as cardiac output and cardiac index, were measured. The time-intensity curve in the microcirculation was analyzed through contrast-enhanced ultrasound imaging software to calculate imaging parameters such as peak time, rise time, fall half-time and mean transit time of the interlobar arteries in the renal cortex. RESULTS: In terms of macrocirculation, renal blood flow and time-averaged velocity decreased gradually with the progression of septic acute renal injury (p = 0.004, p < 0.001). There was no difference in cardiac output and cardiac index values among the three groups (p = 0.17 and p = 0.12). In terms of microcirculation, ultrasonic Doppler parameters of the renal cortical interlobular artery, such as peak intensity, risk index and ratio of peak systolic velocity to end-diastolic velocity, gradually increased (all p values <0.05). The temporal contrast-enhanced ultrasound parameters-time to peak, rise time, fall half-time and mean transit time-were prolonged in AKI groups when compared with the control group (p < 0.001, p = 0.003, p = 0.004 and p = 0.009, respectively). CONCLUSION: In patients with septic AKI, the renal blood flow and time average velocity of macrocirculation in the kidneys are reduced, while the time parameters of microcirculation such as time to peak, rise time, fall half-time and mean transit time are prolonged, especially in patients with severe AKI. These changes are not related to changes in cardiac output or cardiac index.

Localized Alkaline Environment via In Situ Electrostatic Confinement for Enhanced CO2-to-Ethylene Conversion in Neutral Medium.

Electrocatalytic CO2 reduction reaction (CO2RR) is one of the most promising routes to facilitate carbon neutrality. An alkaline electrolyte is typically needed to promote the production of valuable multi-carbon molecules (such as ethylene). However, the reaction between CO2 and OH- consumes a significant quantity of CO2/alkali and causes the rapid decay of CO2RR selectivity and stability. Here, we design a catalyst-electrolyte interface with an effective electrostatic confinement of in situ generated OH- to improve ethylene electrosynthesis from CO2 in neutral medium. In situ Raman measurements indicate the direct correlation between ethylene selectivity and the intensities of surface Cu-CO and Cu-OH species, suggesting the promoted C-C coupling with the surface enrichment of OH-. Thus, we report a CO2-to-ethylene Faradaic efficiency (FE) of 70% and a partial current density of 350 mA cm-2 at -0.89 V vs the reversible hydrogen electrode. Furthermore, the system demonstrated a 50 h stable operation at 300 mA cm-2 with an average ethylene FE of ∼68%. This study offers a universal strategy to tune the reaction micro-environment, and a significantly improved ethylene FE of 64.5% was obtained even in acidic electrolytes (pH = 2).

High-safety and high-efficiency electrolyte design for 4.6 V-class lithium-ion batteries with a non-solvating flame-retardant.

Nonflammable electrolytes are critical for the safe operation of high-voltage lithium-ion batteries (LIBs). Although organic phosphates are effective flame retardants, their poor electrochemical stability with a graphite (Gr) anode and Ni-rich cathodes would lead to the deterioration of electrode materials and fast capacity decay. Herein, we develop a safe and high-performance electrolyte formulation for high-voltage (4.6 V-class) LIBs using flame-retarding ethoxy(pentafluoro) cyclotriphosphazene (PFPN) as a non-solvating diluent for the high-concentration carbonate-ether hybrid electrolyte. In contrast to conventional nonflammable additives with restricted dosage, the high level of PFPN (69% mass ratio in our electrolyte design) could significantly increase the electrolyte flash point and protect the favored anion-rich inner solvation sheath because of its non-solvating feature, thus preventing solvent co-intercalation and structural damage to the Gr anode. The nonflammable electrolyte could also form a stable LiF-rich cathode electrolyte interphase (CEI), which enables superior electrochemical performances of Gr‖LiNi0.8Mn0.1Co0.1O2 (NMC811) full cells at high voltages (∼82.0% capacity retention after 1000 cycles at 4.5 V; 89.8% after 300 cycles at 4.6 V) and high temperatures (50 °C). This work sheds light on the electrolyte design and interphase engineering for developing practical safe high-energy-density LIBs.

Regulating Frozen Electrolyte Structure with Colloidal Dispersion for Low Temperature Aqueous Batteries.

Electrolyte freezing under low temperatures is a critical challenge for the development of aqueous batteries (ABs). While lowering the freezing point of the electrolyte has caught major research efforts, limited attention has been paid to the structural evolution during the electrolyte freezing process and regulating the frozen electrolyte structure for low temperature ABs. Here, we reveal the formation process of interconnected liquid regions for ion transport in frozen electrolytes with various in situ variable-temperature technologies. More importantly, the low-temperature performance of ABs was significantly improved with the colloidal electrolyte design using graphene oxide quantum dots (GOQDs), which effectively inhibits the growth of ice crystals and expands the interconnected liquid regions for facial ion transport. This work provides new insights and a promising strategy for the electrolyte design of low-temperature ABs.

Prognostic value and immunological role of Kruppel-like transcription factor 9 gene in pan-carcinoma.

OBJECTIVE: To investigate the correlation between the expression of Kruppel-like transcription factor 9 (KLF9) and the prognostic value of tumors as well as its relationship with tumor immune invasion. METHODS: A series of bioinformatics methods were used to analyze the relationship between KLF9 and tumor prognosis, tumor mutation burden, microsatellite instability (MSI), and immune cell infiltration in multiple carcinomas. RESULTS: In multiple tumor tissues, the expression of KLF9 was lower compared with paracancerous tissues. Therefore, KLF9 can serve as a protective factor to improve the prognosis of carcinoma patients with certain tumor types. KLF9 was closely related to the clinical staging of various carcinomas. The expression of KLF9 was not only associated with tumor mutation burden and MSI in some tumor types, but also positively correlated with immune and stromal cells in multiple tumors. Further studies have found that, the level of immune cell infiltration was significantly related to the expression of KLF9. CONCLUSION: KLF9 can affect the prognosis of pan-carcinoma, which is related to immune invasion. Therefore, KLF9 can be used as a potential biomarker for the prognosis of pan-carcinoma.

Negating Na‖Na3Zr2Si2PO12 interfacial resistance for dendrite-free and "Na-less" solid-state batteries.

Solid electrolytes hold promise in safely enabling high-energy metallic sodium (Na) anodes. However, the poor Na‖solid electrolyte interfacial contact can induce Na dendrite growth and limit Na utilization, plaguing the rate performance and energy density of current solid-state Na-metal batteries (SSSMBs). Herein, a simple and scalable Pb/C interlayer strategy is introduced to regulate the surface chemistry and improve Na wettability of Na3Zr2Si2PO12 (NZSP) solid electrolyte. The resulting NZSP exhibits a perfect Na wettability (0° contact angle) at a record-low temperature of 120 °C, a negligible room-temperature Na‖NZSP interfacial resistance of 1.5 Ω cm2, along with an ultralong cycle life of over 1800 h under 0.5 mA cm-2/0.5 mA h cm-2 symmetric cell cycling at 55 °C. Furthermore, we unprecedentedly demonstrate in situ fabrication of weight-controlled Na anodes and explore the effect of the negative/positive capacity (N/P) ratio on the cyclability of SSSMBs. Both solid-state Na3V2(PO4)3 and S full cells show superior electrochemical performance at an optimal N/P ratio of 40.0. The Pb/C interlayer modification demonstrates dual functions of stabilizing the anode interface and improving Na utilization, making it a general strategy for implementing Na metal anodes in practical SSSMBs.

Transplantation of splenic tissue after splenectomy: A case report.

Transplantation of splenic tissue is a rare condition that usually occurs after splenic trauma and splenectomy. It usually requires surgery for diagnosis and treatment. A 38-year-old Asian male with familial hemolytic disease underwent laparoscopic splenectomy for a traumatic rupture of the spleen one year prior. The patient developed middle-upper abdominal pain without any obvious cause, radiating to the back and chest seven months prior to presentation. The condition improved with conservative treatment but the patient experienced recurrent episodes. Abdominal CT suggested multiple gallstones in the gallbladder that changed after splenectomy and multiple nodules in the original splenic area; thus, transplantation of splenic tissue was considered. MRI suggested thick gall bladder bile, multiple stones and cholecystitis, and the spleen was not observed (the patient underwent laparoscopic splenectomy at our hospital one year previously due to traumatic splenic rupture); furthermore, there were multiple abnormal signal foci in the splenic area, so the possibility of spleen implantation was considered. Considering the patient's family history of a hereditary hemolytic disease, laparoscopic cholecystectomy was performed simultaneously with laparoscopic accessory splenectomy. The final pathological report revealed chronic cholecystitis, mixed calculi, red pulp dilation, hyperemia and bleeding in round tissue with blood clot formation and acute and chronic inflammatory cell infiltration. Clinicians must bear in mind the possibility of splenosis after splenic trauma and its image variations.

Identification of Genomic Loci and Candidate Genes Related to Seed Tocopherol Content in Soybean.

Soybean seeds are primary sources of natural tocopherols used by the food and pharmaceutical industries, owing to their beneficial impacts on human health. Selection for higher tocopherol contents in seeds along with other desirable traits is an important goal in soybean breeding. In order to identify the genomic loci and candidate genes controlling tocopherol content in soybean seeds, the bulked-segregant analysis technique was performed using a natural population of soybean consisting of 1525 accessions. We constructed the bulked-segregant analysis based on 98 soybean accessions that showed extreme phenotypic variation for the target trait, consisting of 49 accessions with extremely-high and 49 accessions with extremely-low tocopherol content. A total of 144 variant sites and 109 predicted genes related to tocopherol content were identified, in which a total of 83 genes were annotated by the gene ontology functions. Furthermore, 13 enriched terms (p < 0.05) were detected, with four of them found to be highly enriched: response to lipid, response to abscisic acid, transition metal ion transmembrane transporter activity, and double-stranded DNA binding. Especially, six candidate genes were detected at 41.8−41.9 Mb genomic hotspots on chromosome 5 based on ANNOtate VARiation analysis. Among the genes, only Glyma.05G243400 carried a non-synonymous mutation that encodes a "translation elongation factor EF1A or initiation factor IF2gamma family protein" was identified. The haplotype analysis confirmed that Glyma.05G243400 exhibited highly significant variations in terms of tocopherol content across multiple experimental locations, suggesting that it can be the key candidate gene regulating soybean seed tocopherols. The present findings provide novel gene resources related to seed tocopherols for further validation by genome editing, functional characterization, and genetic improvement targeting enhanced tocopherol composition in soybean molecular breeding.

Origin, Maturity Group and Seed Coat Color Influence Carotenoid and Chlorophyll Concentrations in Soybean Seeds.

Soybean (Glycine max (L.) Merrill) seeds are abundant in physiologically active metabolites, including carotenoids and chlorophylls, and are used as an affordable source of functional foods that promote and maintain human health. The distribution and variation of soybean seed metabolites are influenced by plant genetic characteristics and environmental factors. Here, we investigated the effects of germplasm origin, genotype, seed coat color and maturity group (MG) on the concentration variation of carotenoid and chlorophyll components in 408 soybean germplasm accessions collected from China, Japan, the USA and Russia. The results showed that genotype, germplasm origin, seed color, and MG were significant variation sources of carotenoid and chlorophyll contents in soybean seeds. The total carotenoids showed about a 25-fold variation among the soybean germplasms, with an overall mean of 12.04 µg g-1. Russian soybeans yielded 1.3-fold higher total carotenoids compared with Chinese and Japanese soybeans. Similarly, the total chlorophylls were substantially increased in Russian soybeans compared to the others. Soybeans with black seed coat color contained abundant concentrations of carotenoids, with mainly lutein (19.98 µg g-1), ß-carotene (0.64 µg g-1) and total carotenoids (21.04 µg g-1). Concentrations of lutein, total carotenoids and chlorophylls generally decreased in late MG soybeans. Overall, our results demonstrate that soybean is an excellent dietary source of carotenoids, which strongly depend on genetic factors, germplasm origin, MG and seed coat color. Thus, this study suggests that soybean breeders should consider these factors along with environmental factors in developing carotenoid-rich cultivars and related functional food resources.