Identification of Hsp20 gene family in Malus domestica and functional characterization of Hsp20 class I gene MdHsp18.2b.

Heat shock protein 20 (Hsp20) is a small molecule heat shock protein that plays an important role in plant growth, development, and stress resistance. Little is known about the function of Hsp20 family genes in apple (Malus domestica). Here, we performed a genome-wide analysis of the apple Hsp20 gene family, and a total of 49 Hsp20s genes were identified from the apple genome. Phylogenetic analysis revealed that the 49 genes were divided into 11 subfamilies, and MdHsp18.2b, a member located in the CI branch, was selected as a representative member for functional characterization. Treatment with NaCl and Botryosphaeria dothidea (B. dothidea), the causal agent of apple ring rot disease, significantly induced MdHsp18.2b transcription level. Further analysis revealed that overexpressing MdHsp18.2b reduced the resistance to salt stress but enhanced the resistance to B. dothidea infection in apple calli. Moreover, MdHsp18.2b positively regulated anthocyanin accumulation in apple calli. Physiology assays revealed that MdHsp18.2b promoted H2O2 production, even in the absence of stress factors, which might contribute to its functions in response to NaCl and B. dothidea infection. Hsps usually function as homo- or heterooligomers, and we found that MdHsp18.2b could form a heterodimer with MdHsp17.9a and MdHsp17.5, two members from the same branch with MdHsp18.2b in the phylogenetic tree. Therefore, we identified 49 Hsp20s genes from the apple genome and found that MdHsp18.2b was involved in regulating plant resistance to salt stress and B. dothidea infection, as well as in regulating anthocyanin accumulation in apple calli.

Two-Dimensional Spin-Crossover Molecular Solid Solutions with Tunable Transition Temperatures across 90 K.

Spin-crossover (SCO) materials exhibit remarkable potential as bistable switches in molecular devices. However, the spin transition temperatures (Tc) of known compounds are unable to cover the entire ambient temperature spectrum, largely limiting their practical utility. This study reports an exemplary two-dimensional SCO solid solution system, [FeIII(H0.5LCl)2-2x(H0.5LF)2x]·H2O (H0.5LX = 5-X-2-hydroxybenzylidene-hydrazinecarbothioamide, X = F or Cl, x = 0 to 1), in which the adjacent layers are adhered via hydrogen bonding. Notably, the Tc of this system can be fine-tuned across 90 K (227-316 K) in a linear manner by modulating the fraction x of the LF ligand. Elevating x results in strengthened hydrogen bonding between adjacent layers, which leads to enhanced intermolecular interactions between adjacent SCO molecules. Single-crystal diffraction analysis and periodic density functional theory calculations revealed that such a special kind of alteration in interlayer interactions strengthens the FeIIIN2O2S2 ligand field and corresponding SCO energy barrier, consequently resulting in increased Tc. This work provides a new pathway for tuning the Tc of SCO materials through delicate manipulation of molecular interactions, which could expand the application of bistable molecular solids to a much wider temperature regime.

Functions of Phytochrome Interacting Factors (PIFs) in Adapting Plants to Biotic and Abiotic Stresses.

Plants possess the remarkable ability to sense detrimental environmental stimuli and launch sophisticated signal cascades that culminate in tailored responses to facilitate their survival, and transcription factors (TFs) are closely involved in these processes. Phytochrome interacting factors (PIFs) are among these TFs and belong to the basic helix-loop-helix family. PIFs are initially identified and have now been well established as core regulators of phytochrome-associated pathways in response to the light signal in plants. However, a growing body of evidence has unraveled that PIFs also play a crucial role in adapting plants to various biological and environmental pressures. In this review, we summarize and highlight that PIFs function as a signal hub that integrates multiple environmental cues, including abiotic (i.e., drought, temperature, and salinity) and biotic stresses to optimize plant growth and development. PIFs not only function as transcription factors to reprogram the expression of related genes, but also interact with various factors to adapt plants to harsh environments. This review will contribute to understanding the multifaceted functions of PIFs in response to different stress conditions, which will shed light on efforts to further dissect the novel functions of PIFs, especially in adaption to detrimental environments for a better survival of plants.

Plant disease resistance outputs regulated by AP2/ERF transcription factor family.

Plants have evolved a complex and elaborate signaling network to respond appropriately to the pathogen invasion by regulating expression of defensive genes through certain transcription factors. The APETALA2/ethylene response factor (AP2/ERF) family members have been determined as key regulators in growth, development, and stress responses in plants. Moreover, a growing body of evidence has demonstrated the critical roles of AP2/ERFs in plant disease resistance. In this review, we describe recent advances for the function of AP2/ERFs in defense responses against microbial pathogens. We summarize that AP2/ERFs are involved in plant disease resistance by acting downstream of mitogen activated protein kinase (MAPK) cascades, and regulating expression of genes associated with hormonal signaling pathways, biosynthesis of secondary metabolites, and formation of physical barriers in an MAPK-dependent or -independent manner. The present review provides a multidimensional perspective on the functions of AP2/ERFs in plant disease resistance, which will facilitate the understanding and future investigation on the roles of AP2/ERFs in plant immunity.

A Deep-Learning Model for Diagnosing Fresh Vertebral Fractures on Magnetic Resonance Images.

BACKGROUND: The accurate diagnosis of fresh vertebral fractures (VFs) was critical to optimizing treatment outcomes. Existing studies, however, demonstrated insufficient accuracy, sensitivity, and specificity in detecting fresh fractures using magnetic resonance imaging (MRI), and fall short in localizing the fracture sites. METHODS: This prospective study comprised 716 patients with fresh VFs. We obtained 849 Short TI Inversion Recovery (STIR) image slices for training and validation of the AI model. The AI models employed were yolov7 and resnet50, to detect fresh VFs. RESULTS: The AI model demonstrated a diagnostic accuracy of 97.6% for fresh VFs, with a sensitivity of 98% and a specificity of 97%. The performance of the model displayed a high degree of consistency when compared to the evaluations by spine surgeons. In the external testing dataset, the model exhibited a classification accuracy of 92.4%, a sensitivity of 93%, and a specificity of 92%. CONCLUSIONS: Our findings highlighted the potential of AI in diagnosing fresh VFs, offering an accurate and efficient way to aid physicians with diagnosis and treatment decisions.

Magnetic Relaxations of Chromium Nitride Porphyrinato Complexes Driven by the Anisotropic g-Factor.

Molecule-based magnetic materials are useful candidates as the spin qubit due to their long coherence time and high designability. The anisotropy of the g-values of the metal complexes can be utilized to access the individual spin of the metal complexes, making it possible to achieve the scalable molecular spin qubit. For this goal, it is important to evaluate the effect of g-value anisotropy on the magnetic relaxation behaviour. This study reports the slow magnetic relaxation behaviour of chromium nitride (CrN2+ ) porphyrinato complex (1), which is structurally and magnetically similar with the vanadyl (VO2+ ) porphyrinato complex (2) which is known as the excellent spin qubit. Detailed analyses for vibrational and dynamical magnetism of 1 and 2 revealed that g-value anisotropy accelerates magnetic relaxations greater than the internal magnetic field from nuclear spin does. These results provide a design criterion for construction of multiple spin qubit based on g-tensor engineering.

Diagnostic value of mesenteric CTA combined with D-dimer level and inflammatory factor changes in severity of mesenteric artery embolism.

Objective: To investigate the value of mesenteric CTA combined with D-dimer (DD) level and inflammatory factor changes in evaluating the severity of mesenteric artery embolism. Methods: This is a retrospective study. The imaging data of mesenteric CTA and the levels of plasma DD and inflammatory factors in 120 patients with mesenteric artery embolism confirmed by DSA or surgery in Baoding No.1 Central Hospital were analyzed retrospectively from January 2021 to December 2022. The coincidence rate of CTA alone and CTA combined with DD and inflammatory factors with the results of surgery or DSA was compared and analyzed. The specificity, sensitivity and accuracy of CTA alone and CTA combined with DD and inflammatory factors in diagnosing superior mesenteric artery embolism were compared. The correlations of different severity of mesenteric artery embolism with DD and inflammatory factor levels were compared and analyzed. Results: There was a significant difference in the coincidence rate between CTA diagnosis and CTA combined with DD and inflammatory factors diagnosis (p= 0.01). And the sensitivity and accuracy of the latter were significantly higher than those of the former (sensitivity, p= 0.01; accuracy, p= 0.00). The levels of plasma DD, TNF-a, CRP and IL-6 in the intestinal wall thinning group were significantly higher than those in the thickening group (p= 0.00). The above indexes increased significantly in the decreased intestinal wall enhancement group compared with the increased intestinal wall enhancement group (p= 0.00). DD, TNF-ɑ, CRP and IL-6 levels increased with the increase in stenosis severity. Conclusion: Mesenteric CTA combined with plasma DD and inflammatory factor levels can effectively determine the severity of mesenteric arterial embolism, and provide a scientific basis for early clinical diagnosis and treatment.

Ferromagnetically coupled single-chain magnets exhibiting a magnetic hysteresis of 0.42 Tesla in cyano-bridged FeIII2MII (M = Ni, Fe) coordination polymers.

The synthesis, single-crystal structures and magnetic properties of two new double-zigzag-chain cyano-bridged heterobimetallic {[MII(Py-NOH)2][FeIII(Tp*)(CN)3]2}·H2O ([FeIII2MII]) (Py-NOH = 4-pyridinealdoxime, Tp* = tris(3,5-dimethylpyrazol-1-yl)borohydride, M = Ni (1), Fe (2)) compounds are reported. The crystal structures of both compounds were determined by single-crystal X-ray diffraction. Complexes 1 and 2 are isostructural, with the crystal structure comprising neutral double-zigzag (4,2-ribbon-like) bimetallic chains. The FeIII ion is coordinated by three cyanide carbon atoms and three nitrogen atoms of Tp* anions. However, the MII ion is surrounded by four cyanide nitrogen atoms and two nitrogen atoms from two Py-NOH ligands. The crystal structures and magnetic studies demonstrate that both complexes behave as single-chain magnetics (SCMs) with intrachain ferromagnetic coupling. Furthermore, [FeIII2NiII] exhibits an excellent coercive field of 0.42 T at 1.8 K, among cyano-bridged 3d transition-metal-based SCMs reported thus far. Preliminary theoretical calculations provide a deep understanding of the magnetic properties of [FeIII2NiII].

Dual-radical-based molecular anisotropy and synergy effect of semi-conductivity and valence tautomerization in a photoswitchable coordination polymer.

Organic radicals are widely used as linkers or ligands to synthesize molecular magnetic materials. However, studies regarding the molecular anisotropies of radical-based magnetic materials and their multifunctionalities are rare. Herein, a photoisomerizable diarylethene ligand was used to form {[CoIII(3,5-DTSQ·-)(3,5-DTCat2-)]2(6F-DAE-py2)}·3CH3CN·H2O (o-1·3CH3CN·H2O, 6F-DAE-py2 = 1,2-bis(2-methyl-5-(4-pyridyl)-3-thienyl)perfluorocyclopentene), a valence-tautomeric (VT) coordination polymer. We directly observed dual radicals for a single crystal using high-field/-frequency (∼13.3 T and ∼360 GHz) electron paramagnetic resonance (EPR) spectroscopy along the c-axis, which was further confirmed by angle-dependent Q-band EPR spectroscopy. Moreover, a conductive anomaly close to the VT transition temperature was observed only when probes were attached at the ab plane of the single crystal, indicative of synergy between valence tautomerism and conductivity. Structural anisotropy studies and density functional theory (DFT) calculations revealed that this synergy is due to electron transfer associated with valence tautomerism. This study presents the first example of dual-radical-based molecular anisotropy and charge-transfer-induced conductive anisotropy in a photoswitchable coordination polymer.

Boosting the mono-axial crystal field in stable high-coordinate Dy(III) single-ion magnets by substitution of the phenoxy axial ligand.

Synthesis of air-stable and high-performance single-molecule magnets (SMMs) is challenging. Here, a heptadentate pentapyridyldiamine (BPA-TPA) ligand and fine-tuned axial phenoxy ligands are used to synthesize two triangular dodecahedral Dy(III) complexes [Dy(BPA-TPA)(4-methoxy-PhO)](BPh4)2·3CH2Cl2 (4) and [Dy(BPA-TPA)(2,4-dimethyl-PhO)](BPh4)2·0.85CH2Cl2 (5). Both complexes have high effective barriers exceeding 400 K and magnetic hysteresis up to 8 K, which is ascribed to one strong and short Dy-O bond combined with seven weak Dy-N bonds. Ab initio calculations reveal the thermally activated quantum tunneling of magnetization through the first excited Kramers doublet, due to the presence of a strong axial Dy-O crystal ligand. Substitution of the phenoxy ligand leads to more constrained vibrations, improving the magnetic hysteresis behavior for 5.

Inhibitory Effect of Tea Saponin on Major Apple-Disease-Inducing Fungi.

Plant secondary metabolites are well known for their biological functions in defending against pathogenic microorganisms. Tea saponin (TS), one type of secondary metabolite of the tea plant (Camellia sinensis), has been shown to be a valuable botanical pesticide. However, its antifungal activity in controlling the fungi Valsa mali, Botryosphaeria dothidea, and Alternaria alternata, which induce major diseases in apple (Malus domestica), has not been determined. In this study, we first determined that TS has higher inhibitory activity than catechins against the three types of fungi. We further utilized in vitro and in vivo assays to confirm that TS showed high antifungal activity against the three types of fungi, especially for V. mali and B. dothidea. In the in vivo assay, application of a 0.5% TS solution was able to restrain the fungus-induced necrotic area in detached apple leaves efficiently. Moreover, a greenhouse infection assay also confirmed that TS treatment significantly inhibited V. mali infection in leaves of apple seedlings. In addition, TS treatment activated plant immune responses by decreasing accumulation of reactive oxygen species and promoting the activity of pathogenesis-related proteins, including chitinase and ß-1,3-glucanase. This indicated that TS might serve as a plant defense inducer to activate innate immunity to fight against fungal pathogen invasion. Therefore, our data indicated that TS might restrain fungal infection in two ways, by directly inhibiting the growth of fungi and by activating plant innate defense responses as a plant defense inducer.

NanoSIMS sulfur isotopic analysis at 100 nm scale by imaging technique.

NanoSIMS has been widely used for in-situ sulfur isotopic analysis (32S and 34S) of micron-sized grains or complex zoning in sulfide in terrestrial and extraterrestrial samples. However, the conventional spot mode analysis is restricted by depth effects at the spatial resolution < 0.5-1 µm. Thus sufficient signal amount cannot be achieved due to limited analytical depths, resulting in low analytical precision (1.5‰). Here we report a new method that simultaneously improves spatial resolution and precision of sulfur isotopic analysis based on the NanoSIMS imaging mode. This method uses a long acquisition time (e.g., 3 h) for each analytical area to obtain sufficient signal amount, rastered with the Cs+ primary beam of ∼100 nm in diameter. Due to the high acquisition time, primary ion beam (FCP) intensity drifting and quasi-simultaneous arrival (QSA) significantly affects the sulfur isotopic measurement of secondary ion images. Therefore, the interpolation correction was used to eliminate the effect of FCP intensity variation, and the coefficients for the QSA correction were determined with sulfide isotopic standards. Then, the sulfur isotopic composition was acquired by the segmentation and calculation of the calibrated isotopic images. The optimal spatial resolution of ∼ 100 nm (Sampling volume of 5 nm × 1.5 µm2) for sulfur isotopic analysis can be implemented with an analytical precision of ∼1‰ (1SD). Our study demonstrates that imaging analysis is superior to spot-mode analysis in irregular analytical areas where relatively high spatial resolution and precision are required and may be widely applied to other isotopic analyses.

Pseudo-mono-axial ligand fields that support high energy barriers in triangular dodecahedral Dy(iii) single-ion magnets.

The synthesis of air-stable, high-performance single-molecule magnets (SMMs) is of great significance for their practical applications. Indeed, Ln complexes with high coordination numbers are satisfactorily air stable. However, such geometries easily produce spherical ligand fields that minimize magnetic anisotropy. Herein, we report the preparation of three air-stable eight-coordinate mononuclear Dy(iii) complexes with triangular dodecahedral geometries, namely, [Dy(BPA-TPA)Cl](BPh4)2 (1) and [Dy(BPA-TPA)(X)](BPh4)2·nCH2Cl2 (X = CH3O- and n = 1 for 2; L = PhO- and n = 2 for 3), using a novel design concept in which the bulky heptadentate [2,6-bis[bis(2-pyridylmethyl)amino]methyl]-pyridine (BPA-TPA) ligand enwraps the Dy(iii) ion through weak coordinate bonds leaving only a small vacancy for a negatively charged (Cl-), methoxy (CH3O-) or phenoxy (PhO-) moiety to occupy. Magnetic measurements reveal that the single-molecule magnet (SMM) property of complex 1 is actually poor, as there is almost no energy barrier. However, complexes 2 and 3 exhibit fascinating SMM behavior with high energy barriers (U eff = 686 K for 2; 469 K for 3) and magnetic hysteresis temperatures up to 8 K, which is attributed to the pseudolinear ligand field generated by one strong, highly electrostatic Dy-O bond. Ab initio calculations were used to show the apparent difference in the magnetic dynamics of the three complexes, confirming that the pseudo-mono-axial ligand field has an important effect on high-performance SMMs compared with the local symmetry. This study not only presents the highest energy barrier for a triangular dodecahedral SMM but also highlights the enormous potential of the pseudolinear Dy-L ligand field for constructing promising SMMs.

ALD-induced TiO2/Ag nanofilm for rapid surface photodynamic ion sterilization.

The daily life of people in the intelligent age is inseparable from electronic device, and a number of bacteria on touch screens are increasingly threatening the health of users. Herein, a photocatalytic TiO2/Ag thin film was synthesized on a glass by atomic layer deposition and subsequent in situ reduction. Ultraviolet-visible (UV-Vis) spectra showed that this film can harvest the simulated solar light more efficiently than that of pristine TiO2. The antibacterial tests in vitro showed that the antibacterial efficiency of the TiO2/Ag film against S. aureus and E. coli was 98.2% and 98.6%, under visible light irradiation for 5 min. The underlying mechanism was that the in-situ reduction of Ag on the surface of TiO2 reduced the bandgap of TiO2 from 3.44 to 2.61 eV due to the formation of Schottky heterojunction at the interface between TiO2 and Ag. Thus, TiO2/Ag can generate more reactive oxygen species for bacterial inactivation on the surface of electronic screens. More importantly, the TiO2/Ag film had great biocompatibility with/without light irradiation. The platform not only provides a more convenient choice for the traditional antibacterial mode but also has limitless possibilities for application in the field of billions of touch screens.

Hydrogen Bonding Propagated Phase Separation in Quasi-Epitaxial Single Crystals: A Pd-Br Molecular Insulator.

In condensed matter, phase separation is strongly related to ferroelasticity, ferroelectricity, ferromagnetism, electron correlation, and crystallography. These ferroics are important for nano-electronic devices such as non-volatile memory. However, the quantitative information regarding the lattice (atomic) structure at the border of phase separation is unclear in many cases. Thus, to design electronic devices at the molecular level, a quantitative electron-lattice relationship must be established. Herein, we elucidated a PdII-PdIV/PdIII-PdIII phase transition and phase separation mechanism for [Pd(cptn)2Br]Br2 (cptn = 1R,2R-diaminocyclopentane), propagated through a hydrogen-bonding network. Although the Pd···Pd distance was used to determine the electronic state, the differences in the Pd···Pd distance and the optical gap between Mott-Hubbard (MH) and charge-density-wave (CDW) states were only 0.012 Å and 0.17 eV, respectively. The N-H···Br···H-N hydrogen-bonding network functioned as a jack, adjusting the structural difference dynamically, and allowing visible ferroelastic phase transition/separation in a fluctuating N2 gas flow. Additionally, the effect of the phase separation on the spin susceptibility and electrical conductivity were clarified to represent the quasi-epitaxial crystals among CDW-MH states. These results indicate that the phase transitions and separations could be controlled via atomic and molecular level modifications, such as the addition of hydrogen bonding.

Comparison between DySc2N@C80 and Dy2ScN@C80 single-molecule magnetic metallofullerenes encapsulated in single-wall carbon nanotubes.

Encapsulation of a metallofullerene single-molecule magnet, Dy2ScN@C80, into single-wall carbon nanotubes (SWCNTs) accelerates magnetic relaxation processes. In contrast, encapsulation of DySc2N@C80 suppresses them. The effects of the encapsulation are discussed in terms of intermolecular magnetic interactions and charge transfer among metallofullerenes and SWCNTs.

Automatic phantom-less QCT system with high precision of BMD measurement for osteoporosis screening: Technique optimisation and clinical validation.

BACKGROUND: Currently dual-energy X-ray absorptiometry (DXA) and phantom-based quantitative computed tomography (PB-QCT) have been utilized to diagnose osteoporosis widely in clinical practice. While traditional phantom-less QCT (PL-QCT) is limited by the precision of manual calibration using body tissues, such as fat and muscle. OBJECTIVE: The aim of this study is to validate the accuracy and precision of one newly-developed automatic PL-QCT system to measure spinal bone mineral density (BMD) and diagnose osteoporosis. METHODS: A total of 36 patients were enrolled for comparison of BMD measurement between DXA and QCT. CT images of 63 patients were analyzed by both PB-QCT and newly developed automatic PL-QCT system, then the BMD results generated by the automatic PL-QCT were utilized to diagnose osteoporosis. The diagnostic outcomes were compared with that of DXA and PB-QCT to assess the performance of the new system. RESULTS: BMD test results showed that the automatic PL-QCT system had higher precision than previous studies performed with QCT, while maintaining similar capability to diagnose osteoporosis as DXA and PB-QCT. Area under curve (AUC) result of PL-QCT was larger than 0.8 for predicting spine DXA T-score in receiver operating characteristic (ROC) analysis. Pearson correlation analysis (r â€‹= â€‹0.99) showed strong linear correlation and Bland-Altman analysis (bias â€‹= â€‹3.0mg/cc) indicated little difference between the two methods. The precision result (CV â€‹= â€‹0.89%) represented good reproducibility of the new system. CONCLUSION: The traditional PL-QCT system has relatively low reproducibility due to the manual selection of the region of interest (ROI) of body tissues. Automatic selection of ROI in this new system makes the BMD testing more convenient and improves precision significantly. Compared with traditional BMD measurement methods, the automatic PL-QCT system had higher precision in accurate diagnosis of osteoporosis with great potential in translational research and wide clinical application. TRANSLATIONAL POTENTIAL STATEMENT: With high accuracy and precision, the automatic PL-QCT system could serve as an opportunistic screening tool for osteoporosis patients in the future. It could also facilitate related researches by providing more reliable data collection, both retrospectively and longitudinally.

Tuning the Equatorial Negative Charge in Hexagonal Bipyramidal Dysprosium(III) Single-Ion Magnets to Improve the Magnetic Behavior.

Taking advantage of the pentaethylene glycol (EO5) and deprotonation of EO5, a family of new structurally hexagonal bipyramidal Dy(III) complexes, [Dy(EO5)(2,6-dichloro-4-nitro-PhO)2](2,6-dichloro-4-nitro-PhO) (1), [Dy(EO5-BPh2)(2,6-dichloro-4-nitro-PhO)2] (2), and [Dy(EO5-BPh2)(2,6-dichloro-4-nitro-PhO)Cl] (3), were controbllably synthesized and structurally characterized. Magnetic measurements show that complex 1 is a zero-field SIM and has an observable hysteresis opening up to 4 K. Conversely, only under extra magnetic field is slow magnetic relaxation observed in 2 and 3. This considerable difference in the magnetic behavior is mainly caused by the change of the equatorial negative charge. Detailed ab initio calculations further elucidate that the quantum tunneling is induced by the presence of equatorial negative charge, and the magnetic anisotropy depends on the axial ligands. This work demonstrates that the absence of the equatorial negative charge should also be considered in the rational design of promising single molecular magnets based on the oblate ions.

Apple receptor-like kinase FERONIA regulates salt tolerance and ABA sensitivity in Malus domestica.

FERONIA (FER) is a membrane-localized receptor-like kinase that plays pivotal roles in male and female gametophyte recognition, hormone signaling crosstalk, and biotic and abiotic responses. Most reports focus on the functions of FER in model plant Arabidopsis thaliana. However, the functions of FER homologs have not been deeply investigated in apple (Malus domestica), an important economic fruit crop distributed worldwide, especially in China. In this study, we identified an apple homolog of Arabidopsis FER, named MdFER (MDP0000390677). The two proteins encoded by AtFER and MdFER share similar domains: an extracellular malectin-like domain, a transmembrane domain, and an intracellular kinase domain. MdFER was further proven to localize to the plasma membrane in the epidermal cells of Nicotiana benthamiana. MdFER was widely expressed in different apple tissues, but the highest expression was found in roots. In addition, expression of MdFER was significantly induced by treatment with abscisic acid (ABA) and salt (NaCl). Overexpressing MdFER dramatically improved the resistance to salt stress and reduced the sensitivity to ABA in apple callus, while suppressing MdFER expression showed contrary effects. Furthermore, ectopic expression of MdFER in Arabidopsis significantly increased the salt tolerance and reduced the sensitivity to ABA. In addition, under salt stress and ABA treatment, Arabidopsis with highly expressed MdFER accumulated less reactive oxygen species (ROS), and the enzymatic activity of two ROS scavengers, superoxide dismutase and catalase, was higher compared with that of wild type (WT). Our work proves that MdFER positively regulates salt tolerance and negatively regulates ABA sensitivity in apple, which enriched the functions of FER in different plant species.

π-Extended Doublet Open-Shell Graphene Fragments Exhibiting One-Dimensional Chain Stacking.

The hitherto elusive benzo[c]anthanthrenyl radical derivatives composed of seven fused six-membered rings are synthesized and isolated in the crystalline form, representing a laterally π-extended doublet open-shell graphene fragment compared to the phenalenyl and olympicenyl radical structures. X-ray crystallographic analysis revealed one-dimensional chain stacking with relatively close intermolecular contacts, which is an important precondition for achieving single-component conductors. The magnetic, optical, and redox properties are investigated in the solution phase. In combination with the good stability, such open-shell molecular systems have potentials as functional electronic materials.