Preparation of Thin-Layered Hexagonal Boron Nitride Nanosheet with Oxygen Doping.

Hexagonal boron nitride nanosheet (h-BNNS), a structural analogue of graphene, possesses remarkable properties such as exceptional electrical insulation, great resistance to corrosion, excellent mechanical strength, and thermal conductivity. Nonetheless, its continued development is still hampered by the lack of a preparation technique with an easy-to-follow procedure and reliable composition and structure control. In this study, we investigated a two-step protocol for uniform size production of thin-layered h-BNNS. By carefully manipulating the crystallization degree during synthesis of h-BN powder and employing subsequent hydrothermal treatment, we successfully obtained h-BNNS with an even thickness of only a few atomic layers. Compared with the broadly used liquid-phase exfoliation process, not only is the thickness significantly decreased but also the yield is considerably elevated to several grams. Moreover, the in-plane O doping content can be adjusted within a relatively wide range. Overall, our finding demonstrates the potential of this approach in facilitating the exploration and utilization of h-BNNS.

Design, Synthesis, and Fungicidal Activity against Rice Sheath Blight of Novel N-Acyl-1,2,3,4-tetrahydroquinoline Derivatives.

To discover fungicides with novel targets, a series of N-acyl-1,2,3,4-tetrahydroquinoline (NATHQ) derivatives were designed and synthesized by linking the active substructure NATHQ moiety in aspernigerin with the O-benzyl oxime-ether scaffold in commercial agrochemicals. Target compound structures were identified using proton and carbon-13 nuclear magnetic resonance spectroscopies and high-resolution mass spectrometry. Preliminary bioassays indicated that at 40 mg/L, some target compounds exhibited moderate to considerable in vitro fungicidal activities against Rhizoctonia solani and Botrytis cinerea. In particular, compound 3j exhibited higher fungicidal activities both in vitro (EC50 = 0.733 mg/L) and in vivo (EC50 = 15.2 mg/L) against R. solani than the commercial fungicide prochloraz; therefore, it should be a promising fungicide candidate against rice sheath blight. Additionally, compound 3j exhibited good laccase inhibitory activity (73.2% at 200 mg/L). Molecular docking revealed that the bis-cyano-oxime-ether moiety of compound 3j exhibited an excellent binding mode with the laccase target protein and could be used as a lead compound for developing laccase inhibitors. The structural features of these NATHQ derivatives will provide inspiration for developing laccase inhibitors and discovering more effective fungicides to control agricultural diseases.

Enhancing Methane Removal Efficiency of ZrMnFe Alloy by Partial Replacement of Fe with Co.

High-purity hydrogen is extensively employed in chemical vapor deposition, and the existence of methane impurity significantly impacts the device performance. Therefore, it is necessary to purify hydrogen to remove methane. The ZrMnFe getter commonly used in the industry reacts with methane at a temperature as high as 700 ∘C, and the removal depth is not sufficient. To overcome these limitations, Co partially substitutes Fe in the ZrMnFe alloy. The alloy was prepared by suspension induction melting method, and was characterized by means of XRD, ICP, SEM and XPS. The concentration of methane at the outlet was detected by gas chromatography to characterize the hydrogen purification performance of the alloy. The removal effect of the alloy on methane in hydrogen increases first and then decreases with the increase in substitution amount, and increases with the increase in temperature. Specifically, the ZrMnFe0.7Co0.3 alloy reduces methane levels in hydrogen from 10 ppm to 0.215 ppm at 500 ∘C. ZrMnFe0.7Co0.3 alloy can remove 50 ppm of methane in helium to less than 0.01 ppm at 450 ∘C, demonstrating its excellent methane reactivity. Moreover, Co substitution reduces the formation energy barrier of ZrC, and Co in the electron-rich state demonstrates superior catalytic activity for methane decomposition.

A Potential Fungicide against Pseudoperonospora Cubensis: Design, Synthesis and 3D-QSAR of New Pyrazole-5-Carboxamide Derivatives.

BACKGROUND: Downy mildew is one of the major fungi causing significant economic losses to crops. The resistance of this fungus to current fungicides is increasing and new fungicides with a unique mode of action are needed. OBJECTIVE: To find a novel pyrazole amide derivative as a potential fungicide. METHODS: A series of pyrazole-5-carboxamide derivatives containing a diaryl ether were designed and synthesized by the Intermediate derivatization method (IDM). Their fungicidal activities against Pseudoperonospora cubensis (P. cubensis, cucumber downy mildew) were evaluated in the greenhouse. RESULTS: Bioassays indicated that several compounds exhibited excellent fungicidal activity against P. cubensis in vivo. In particular, T24 (EC50 = 0.88 mg L-1) had the highest activity compared with Dimethomorph and Fluazinam and other analogues. The relationship between the activity and the structure of these derivatives was analyzed, and an accurate and reliable three-dimensional quantitative structure-activity relationship (3D-QSAR) model was established to determine that electrostatic and steric fields had important effects on the improvement of fungicidal activity. CONCLUSION: The novel pyrazole-5-carboxamide derivative T24 can be considered a potential fungicide for P. cubensis control.

High-throughput synthesis of AlPO and SAPO zeolites by ink jet printing.

Ink jet printing is for the first time introduced into the synthesis of aluminophosphate (AlPO) and silicoaluminophosphate (SAPO) zeolite. As a high-throughput technique, 256 zeolite precursors with multiple formulations could be obtained within 2 h, while the product phase was regulated relative to the variant compositions.

Design, Synthesis and Fungicidal Activity of N-(thiophen-2-yl) Nicotinamide Derivatives.

Based on the modification of natural products and the active substructure splicing method, a series of new N-(thiophen-2-yl) nicotinamide derivatives were designed and synthesized by splicing the nitrogen-containing heterocycle natural molecule nicotinic acid and the sulfur-containing heterocycle thiophene. The structures of the target compounds were identified through 1H NMR, 13C NMR and HRMS spectra. The in vivo bioassay results of all the compounds against cucumber downy mildew (CDM, Pseudoperonospora cubensis (Berk.et Curt.) Rostov.) in a greenhouse indicated that compounds 4a (EC50 = 4.69 mg/L) and 4f (EC50 = 1.96 mg/L) exhibited excellent fungicidal activities which were higher than both diflumetorim (EC50 = 21.44 mg/L) and flumorph (EC50 = 7.55 mg/L). The bioassay results of the field trial against CDM demonstrated that the 10% EC formulation of compound 4f displayed excellent efficacies (70% and 79% control efficacies, respectively, each at 100 mg/L and 200 mg/L) which were superior to those of the two commercial fungicides flumorph (56% control efficacy at 200 mg/L) and mancozeb (76% control efficacy at 1000 mg/L). N-(thiophen-2-yl) nicotinamide derivatives are significant lead compounds that can be used for further structural optimization, and compound 4f is also a promising fungicide candidate against CDM that can be used for further development.

Measurement and the improvement of effective thermal conductivity for a metal hydride bed - a review.

Solid-state hydrogen storage based on metal hydrides is considered a promising method for hydrogen storage. However, the low inherent thermal conductivity of metal hydride powder significantly limits the hydrogenation/dehydrogenation process in the metal hydride bed. Accurate measurement and improvement of the effective thermal conductivity of a hydride bed is of great significance for design of solid-state hydrogen storage devices. This article analyzes the factors that influence the effective thermal conductivity of a metal hydride bed, and also introduces different measurement methods and improvement ways for the effective thermal conductivity of a metal hydride bed. It is an effective way to improve the thermal conductivity of metal hydride beds by hydride powder mixed with a high thermal conductivity material and compaction. Accurately measuring the influence of hydrogen pressure, temperature and hydrogen storage capacity and other factors on the effective thermal conductivity of a metal hydride bed and obtaining the numerical equation of effective thermal conductivity play an important role in guiding the optimization design of heat and mass transfer structure of metal hydride hydrogen storage devices. The transient plane source method seems to be a better measurement choice because of short test time and easy to establish a pressure-tight and temperature control test system. However, there is still a lack of testing standards for the thermal conductivity of the hydride bed, as well as suggestions for the selection of test methods, improvement ways and design of in situ test room.

Design, Synthesis, and Structure-Activity Relationship of Novel Spiropyrimidinamines as Fungicides against Pseudoperonospora cubensis.

Harmful fungus and the developed resistance to available fungicides seriously threaten the yield and quality of crops; thus, the search for new, highly efficient, and resistance-overcoming fungicides remains a quite urgent goal of agricultural scientists. In this study, a series of novel spiropyrimidinamine derivatives were designed and synthesized by employing the intermediate derivatization method (IDM). Their structures were identified by 1H NMR, elemental analyses, and MS spectra. The structure of compound 5 was further confirmed by X-ray diffraction. Bioassays indicated that a number of the title compounds exhibited some fungicidal activities against Pseudoperonospora cubensis. Especially, compound 5 displayed excellent activity (EC50 = 0.422 mg/L), significantly higher than those of the commercialized fungicides cyazofamid, flumorph, and diflumetorim. The structure-activity relationship was also discussed. It was concluded that compound 5 with super fungicidal potency and a novel structure is a promising agrochemical fungicide candidate for further development.

Design, Synthesis, and Structure-Activity Relationship of New Arylpyrazole Pyrimidine Ether Derivatives as Fungicides.

To explore a novel fungicide effectively against cucumber downy mildew (CDM), a series of new arylpyrazole containing pyrimidine ether derivatives were designed and synthesized by employing the intermediate derivatization method (IDM). The structures of synthesized compounds were identified by 1H NMR, 13C NMR, elemental analyses, MS, and X-ray diffraction. Bioassays demonstrated that some of the title compounds exhibited excellent fungicidal activities against CDM. Especially, compound 7 (EC50 = 1.22 mg/L) displayed significantly higher bioactivity than that of commercial fungicides diflumetorim and flumorph and nearly equal effect to that of cyazofamid. The relationship between the structure and fungicidal activity of the synthesized compounds was discussed as well. The study showed that compound 7 was a promising fungicide candidate for further development.

Recent advances on the thermal destabilization of Mg-based hydrogen storage materials.

Magnesium hydride and its compounds have a high hydrogen storage capacity and are inexpensive, and thus have been considered as one of the most promising hydrogen storage materials for on-board applications. Nevertheless, Mg/MgH2 systems suffer from great drawbacks in terms of kinetics and thermodynamics for hydrogen uptake/release. Over the past decades, although significant progress has been achieved with respect to hydrogen sorption kinetics in Mg/MgH2 systems, their high thermal stability remains the main drawback, which hinders their practical applications. Accordingly, herein, we present a brief summary of the synthetic routes and a comprehensive overview of the advantages and disadvantages of the promising strategies to effectively tune the thermodynamics of Mg-based materials, such as alloying, nanostructuring, metastable phase formation, changing reaction pathway, and nano Mg-based composites. Among them nanostructuring and metastable phase formation, which have the superiority of changing the thermodynamics without affecting the hydrogen capacity, have attracted increasing interest in this field. To further optimize the hydrogen storage performance, we specially emphasize novel nanostructured materials, which have the advantage of combining alloy engineering, nanostructuring and the synergistic effect to change the thermodynamics of Mg/MgH2 to some extent. Furthermore, the remaining challenges and the directions of further research on MgH2, including the fundamental mechanism of the Mg-H bond instability, advanced synthetic routes, stabilizing nanostructures, and predicting novel composite materials, are proposed.

Fast Optimization of LiMgMnOx/La2O3 Catalysts for the Oxidative Coupling of Methane.

The development of efficient catalyst for oxidative coupling of methane (OCM) reaction represents a grand challenge in direct conversion of methane into other useful products. Here, we reported that a newly developed combinatorial approach can be used for ultrafast optimization of La2O3-based multicomponent metal oxide catalysts in OCM reaction. This new approach integrated inkjet printing assisted synthesis (IJP-A) with multidimensional group testing strategy (m-GT) tactfully takes the place of conventionally high-throughput synthesis-and-screen experiment. Just within a week, 2048 formulated LiMgMnOx-La2O3 catalysts in a 64·8·8·8·8 = 262 144 compositional space were fabricated by IJP-A in a four-round synthesis-and-screen process, and an optimized formulation has been successfully identified through only 4·8 = 32 times of tests via m-GT screening strategy. The screening process identifies the most promising ternary composition region is Li0-0.48Mg0-6.54Mn0-0.62-La100Ox with an external C2 yield of 10.87% at 700 °C. The yield of C2 is two times as high as the pure nano-La2O3. The good performance of the optimized catalyst formulation has been validated by the manual preparation, which further prove the effectiveness of the new combinatorial methodology in fast discovery of heterogeneous catalyst.

Design, Synthesis, and Structure-Activity Relationship of New Pyrimidinamine Derivatives Containing an Aryloxy Pyridine Moiety.

The pyrimidinamine diflumetorim is an ideal template for the discovery of agrochemical lead compounds due to its unique mode of action, novel chemical structure, and lack of reported resistance. To develop a new pyrimidinamine fungicide effective against cucumber downy mildew (CDM), a series of new pyrimidinamine derivatives containing an aryloxy pyridine moiety were designed and synthesized by employing the recently reported intermediate derivatization method (IDM). The structures of all compounds were identified by 1H NMR, elemental analyses, HRMS, and X-ray diffraction. Bioassays demonstrated that some of the title compounds exhibited excellent fungicidal activities against CDM. Compound 9 gave the best activity (EC50 = 0.19 mg/L), which is significantly better than the commercial fungicides diflumetorim, flumorph, and cyazofamid. The relationship between structure and fungicidal activity of the synthesized pyrimidinamines was explored. The study showed that compound 9 is a promising fungicide candidate for further development.

Design, synthesis and structure-activity relationship of novel diphenylamine derivatives.

Diphenylamine derivatives have been reported with good fungicidal, insecticidal, acaricidal, rodenticidal and/or herbicidal activities. To find new lead compound of this kind, a series of novel diphenylamine derivatives were designed and synthesized by the approach of Intermediate Derivatization Methods. All compounds were identified by (1)H NMR and elemental analysis. Bioassays demonstrated that some compounds substituted at 2,4,6-positions or 2,4,5-positions of phenyl ring B exhibited excellent fungicidal activities. The optimal compounds P30 and P33 showed 80% and 85% control respectively against cucumber downy mildew at 12.5mgL(-1), both 100% control against rice blast at 0.3mgL(-1) and both 100% control against cucumber gray mold at 0.9mgL(-1). The relationship between structure and fungicidal activities was discussed as well.

Design, synthesis, and structure-activity relationship of novel aniline derivatives of chlorothalonil.

Chlorothalonil with both low cost and low toxicity is a popularly used fungicide in the agrochemical field. The presence of nucleophilic groups on this compound allows further chemical modifications to obtain novel chlorothalonil derivatives. Fluazinam, another commercially available agent with a broad fungicidal spectrum, has a scaffold of diaryl amine structure. To mimic this backbone structure, a variety of (un)substituted phenyl amines was used as nucleophilic agents to react with chlorothalonil to obtain compounds with a diphenyl amine structure. Via an elegant design, two leads, 2,4,5-trichloro-6-(2,4-dichlorophenylamino)isophthalonitrile (7) and 2,4,5-trichloro-6-(2,4,6-trichlorophenylamino)isophthalonitrile (11), with potential fungicidal activity were discovered after a preliminary bioassay screen. These two leads were further modified to obtain final products by replacing the chlorine groups in the phenyl ring in phenyl amine with other functional groups. These functional groups with various electronic properties and spatial characteristics were considered to explore the relationship between structure and fungicidal activity. The results indicate that the electron-withdrawing group NO2 on the 4 position on the right phenyl ring plays a unique role on enhancing the fungicidal activity. The compounds were identified by proton nuclear magnetic resonance and elemental analysis. Bioassays demonstrated that some of the title compounds exhibited excellent fungicidal activities against cucumber downy mildew at 25 mg/L. Compound 20 has been shown as the optimal structure with 85% control against cucumber downy mildew at 6.25 mg/L concentration. The relationship between structure and fungicidal activity is reported. The present work demonstrates that chlorothalonil derivatives can be used as possible lead compounds for developing novel fungicides.

Design, synthesis and structure-activity relationship of novel coumarin derivatives.

BACKGROUND: The lead coumarin derivative (E)-methyl 3-methoxy-2-[2-(4-methylcoumarin-7-yloxymethyl)phenyl]acrylate was discovered by using an intermediate derivatisation method. To discover new coumarin derivatives with improved activity, a series of substituted coumarins were synthesised and bioassayed. RESULTS: The compounds were identified by ¹H NMR, IR, MS and elemental analysis. Bioassays demonstrated that some of the title compounds exhibited excellent fungicidal activity against cucumber downy mildew at 25 mg L⁻¹. The relationship between structure and fungicidal activity is reported. CONCLUSION: The present work demonstrates that coumarin derivatives containing methoxyacrylate moieties can be used as possible lead compounds for developing novel fungicides.

Synthesis and bioactivity of novel coumarin derivatives.

A series of coumarin derivatives (6-8) containing (E)-methyl 2-(methoxyimino)-2-phenylacetate, (E)-2-(methoxyimino)-N-methyl-2-phenylacetamide and methyl methoxy(phenyl)carbamate were synthesized from substituted resorcinols (1) and substituted beta-keto esters (2) as starting material via cyclization and condensation reactions. The test results indicated that (E)-methyl 2-{2-[(3-hexyl-4-methyl-coumarin-7-yloxy)methyl]phenyl}-2-(methoxyimino)acetate (6f) was the optimal structure with good fungicidal activity against cucumber grey mold (CGM) giving 100% control at 100 mg L(-1) concentration, much higher than that of coumoxystrobin. Methyl 2-[(3,4-dimethyl-coumarin -7-yloxy)methyl]phenyl(methoxy)carbamate (8a) was another optimal structure with good fungicidal activity against wheat powdery mildew (WPM) showing 100% control at 50 mg L(-1) concentration, at the same level as that of the commercial kresoxim-methyl, and very significantly higher than that of coumoxystrobin (no control against WPM at 400 mg L(-1)).

Design, synthesis and biological activities of new strobilurin derivatives containing substituted pyrazoles.

BACKGROUND: Strobilurins are one of the most important classes of agricultural fungicides. To discover new strobilurin analogues with high activity, a series of new strobilurin derivatives containing substituted pyrazoles in the side chain were synthesised and bioassayed. RESULTS: The compounds were identified by (1)H NMR, IR, MS and elemental analysis. Preliminary bioassays indicated that some title compounds exhibited excellent fungicidal activities against Pseudoperonospora cubensis (Burk. & Curt.) Rostovsev and Erysiphe graminis DC f. sp. tritici Marchal, protecting cucumber and wheat at 6.25 and 1.56 mg L(-1) respectively, and showed a moderately high acaricidal activity against Tetranychus cinnabarinus (Boisd.) at 20 mg L(-1). The relationship between structure and biological activity is discussed in terms of effects of the substituent of the pyrazole ring. CONCLUSION: The present work demonstrates that strobilurin analogues with substituted phenylpyrazolylmethoxymethyl side chains can be used as possible lead compounds for further developing novel fungicides and acaricides.

Synthesis and biological activity of new (E)-alpha-(Methoxyimino)benzeneacetate derivatives containing a substituted pyrazole ring.

Strobilurins are one of the most important classes of agricultural fungicides. To discover new strobilurin analogues with high activity, a series of new strobilurin derivatives containing a substituted pyrazole in the side chain were synthesized and their biological activities were tested. The compounds were identified by (1)H nuclear magnetic resonance, infrared, and elemental analysis. The test results indicated that the compounds exhibited strong fungicidal activities against Pyricularia oryzae , Phytophthora infestans , Pseudoperonospora cubensis , and Erysiphe graminis . The relationship between structure and biological activity is discussed in terms of the effects of the substituents on the pyrazole ring. The present work demonstrates that strobilurin analogues with a 3-(substituted phenyl)-1H-pyrazol-5-oxy side chain can be used as possible lead compounds for the development of potential agrochemicals.

Design, synthesis and fungicidal activity of novel strobilurin analogues containing substituted N-phenylpyrimidin-2-amines.

A series of novel compounds (5-8) was designed and synthesized by integrating the active pharmacophore of the N-phenylpyrimidin-2-amine fungicide with the structure of strobilurin fungicide. The rationale of this approach was to determine if these new compounds exhibit unique biological activity (selectivity and potency) compared with the commercial standards. The title compounds were prepared from 2-(phenylamino)pyrimidin-4-ols (3) by treatment with one equivalent of intermediates (4) containing strobilurin pharmacophores. 2-(Phenylamino)pyrimidin-4-ols (3) were in turn prepared from phenylguanidines (1) and substituted beta-ketoesters (2). Biological activities evaluated in the greenhouse indicated that compounds 5a, 6a and 7a have good fungicidal activity at 25 mg/L, comparable with that of the commercial standards, cyprodinil and azoxystrobin.

Design, synthesis and biological activity of new strobilurin derivatives with a 1H-pyrazol-5-oxy side chain.

A series of new strobilurin derivatives with a substituted pyrazole side chain (5 and 6) were designed and synthesized. The new derivatives were synthesized from substituted phenones as starting material via esterification, cyclization and condensation reactions. All compounds were identified by 1H NMR and IR spectral and elemental analyses. Preliminary biological evaluation showed that some of the compounds had good fungicidal activity against cucumber downy mildew (CDM) and wheat powdery mildew (WPM) at 6.25 and 1.56 mg L(-1), respectively. Some of the compounds showed insecticidal activity against armyworm (AW), green peach aphid (GPA) and culex mosquitoes at 600 mg L(-1).