Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive.

Lithium metal batteries with high nickel ternary (LiNixCoyMn1-x-yO2, x ≥ 0.8) as the cathode hold the promise to meet the demand of next-generation high energy density batteries. However, the unsatisfactory stability of electrode-electrolyte interfaces limits their practical applications. In this work, N-methyl-N-trimethylsilyltrifluoroacetamide (NMTFA) is suggested as a new functional electrolyte additive to stabilize the Li∥LiNi0.9Co0.05Mn0.05O2 chemistry by forming robust and effective electrode-electrolyte interphases, namely the anode-electrolyte interphase (AEI, or conventionally called SEI) and cathode-electrolyte interphase (CEI). The NMTFA-derived SEI/CEI greatly enhances the battery performance that a capacity retention of 82.1% after 200 cycles at 1C charge/discharge is achieved, significantly higher than that without NMTFA addition (52.5%). Moreover, the NMTFA also improves the thermal stability of the electrolyte and inhibits the hydrolysis of LiPF6. This work provides new clues for the optimization of electrolyte formulation for lithium-high nickel batteries through modulating interfaces.

Direct Dioxygen Radical Coupling Driven by Octahedral Ruthenium-Oxygen-Cobalt Collaborative Coordination for Acidic Oxygen Evolution Reaction.

The acidic oxygen evolution reaction (OER) has long been the bottleneck of proton exchange membrane water electrolyzers given its harsh oxidative and corrosive environments. Herein, we suggest an effective strategy to greatly enhance both the acidic OER activity and stability of Co3O4 spinel by atomic Ru selective substitution on the octahedral Co sites. The resulting highly symmetrical octahedral Ru-O-Co collaborative coordination with strong electron coupling effect enables the direct dioxygen radical coupling OER pathway. Indeed, both experiments and theoretical calculations reveal a thermodynamically breakthrough heterogeneous diatomic oxygen mechanism. Additionally, the active Ru-O-Co units are well-maintained upon the acidic OER thanks to the electron transfer from surrounding electron-enriched tetrahedral Co atoms via bridging oxygen bonds that suppresses the overoxidation and thus dissolution of active Ru and Co species. Consequently, the prepared catalyst, even with a low Ru mass loading of ca. 42.8 µg cm-2, exhibits an attractive acidic OER performance with a low overpotential of 200 mV and a low potential decay rate of 0.45 mV h-1 at 10 mA cm-2. Our work suggests an effective strategy to significantly enhance both the acidic OER activity and stability of low-cost electrocatalysts.

AgxZny Protective Coatings with Selective Zn2+/H+ Binding Enable Reversible Zn Anodes.

Zinc (Zn) metal anodes suffer from the dendrite growth and hydrogen evolution reaction (HER) in classical aqueous electrolytes, which severely limit their lifespan. We propose a rational design of AgxZny protective coatings with selective binding to Zn2+ against H+ to simultaneously regulate the Zn growth pattern and the HER kinetics. We further demonstrate that by tuning the composition of the AgxZny coating the Zn deposition behavior can be readily tuned from the conventional plating/stripping (on Zn-AgZn3 coating) to alloying/dealloying (on Ag-AgZn coating), resulting in precise control of the Zn growth pattern. Moreover, the synergy of Ag and Zn further suppresses the competitive HER. As a result, the modified Zn anodes possess a significantly enhanced lifespan. This work provides a new strategy for enhancing the stability of Zn and potentially other metal anodes by precisely manipulating the binding strength of protons and metal charge carriers in aqueous batteries.

An acid-alkaline furfural hybrid battery for furoate and bipolar hydrogen production.

We propose an acid-alkaline furfural hybrid battery that can achieve a discharging power density of 47 mW cm-2 under 100 mA cm-2 energy output with a H2 faradaic efficiency (FE) up to ca. 200% and a furoate FE of around 97% with the aid of our developed Pt-Cu electrocatalyst.

Sputtered binder-free Cu3N electrode materials for high-performance quasi-solid-state asymmetric supercapacitors.

Developing high-efficiency electrode materials is of great importance in manufacturing supercapacitor devices with superior electrochemical performance. Herein, we for the first time report a binder-free method for controllable growth of Cu3N electrode materials via magnetron sputtering for supercapacitor applications. Benefiting from their unique polyhedral structure and good electrical conductivity, Cu3N electrodes can achieve an areal capacity of 90.7 mC cm-2 at 1 mA cm-2 and outstanding cycling stability with a capacity retention of 97.4% after 20 000 cycles. In particular, the assembled Cu3N//active carbon quasi-solid-state asymmetric supercapacitor can exhibit a maximum energy density of 13.2 µW h cm-2 and a power density of 4.8 mW cm-2 with an operating voltage of 1.6 V. These remarkable performances demonstrate the great potential of sputtered Cu3N electrode materials for future energy storage applications.

Synergy of VN and Fe2O3 Enables High Performance Anodes for Asymmetric Supercapacitors.

Fe2O3 is one of the most common anode materials beyond carbons but suffers from unsatisfactory capacity and poor stability, which are associated with the insufficient utilization of active material and the structural instability caused by the phase transformation. In this work, we report an effective strategy to overcome the above issues through electronic structure optimization by constructing delicately designed Fe2O3@VN core-shell structure. The Fe2O3@VN/CC exhibits a much higher areal capacity of 254.8 mC cm-2 at 5 mA cm-2 (corresponding to 318.5 mF cm-2, or 265.4 F g-1) than the individual VN (48 mC cm-2, or 60 mF cm-2) or Fe2O3/CC (93.36 mC cm-2, or 116.7 mF cm-2), along with enhanced stability. Moreover, the assembled asymmetric supercapacitor devices based on Fe2O3@VN/CC anode and RuO2/CC cathode show a high stack energy density of 0.5 mWh cm-3 at a power density of 12.28 mW cm-3 along with good stability (80% capacitance retention after 14000 cycles at 10 mA cm-2). This work not only establishes the Fe2O3@VN as a high-performance anode material but also suggests a general strategy to enhance the electrochemical performance of traditional anodes that suffer from low capacity (capacitance) and poor stability.

A Hydrazine-Nitrate Flow Battery Catalyzed by a Bimetallic RuCo Precatalyst for Wastewater Purification along with Simultaneous Generation of Ammonia and Electricity.

The traditional technologies for industrial and agricultural effluent treatment are often energy-intensive. Herein, we suggest an electrochemical redox strategy for spontaneous and simultaneous decontamination of wastewater and generation of both fuels and electricity at low cost. Using hydrazine and nitrate effluents as a demonstration, we propose a hydrazine-nitrate flow battery (HNFB) that can efficiently purify the wastewater and meanwhile generate both ammonia fuel and electricity with the assistance of our developed bimetallic RuCo precatalyst. Specifically, the battery delivers a peak power density of 12 mW cm-2 and continuously operates for 20 h with an ammonia yield rate of ca. 0.38 mmol h-1 cm-2 under 100 mA cm-2 . The generated electricity can further drive a hydrazine electrolyzer to produce hydrogen fuel. Our work provides an alternative pathway to purify wastewater and generate high value-added fuels at low cost.

Status and Opportunities of Zinc Ion Hybrid Capacitors: Focus on Carbon Materials, Current Collectors, and Separators.

Zinc ion hybrid capacitors (ZIHCs), which integrate the features of the high power of supercapacitors and the high energy of zinc ion batteries, are promising competitors in future electrochemical energy storage applications. Carbon-based materials are deemed the competitive candidates for cathodes of ZIHC due to their cost-effectiveness, high electronic conductivity, chemical inertness, controllable surface states, and tunable pore architectures. In recent years, great research efforts have been devoted to further improving the energy density and cycling stability of ZIHCs. Reasonable modification and optimization of carbon-based materials offer a remedy for these challenges. In this review, the structural design, and electrochemical properties of carbon-based cathode materials with different dimensions, as well as the selection of compatible, robust current collectors and separators for ZIHCs are discussed. The challenges and prospects of ZIHCs are showcased to guide the innovative development of carbon-based cathode materials and the development of novel ZIHCs.

In Situ Alloying Sites Anchored on an Amorphous Aluminum Nitride Matrix for Crystallographic Reorientation of Zinc Deposits.

Secondary aqueous zinc-ion batteries (ZIBs) are considered as one of the promising energy storage devices, but their widespread application is limited by the Zn dendrite issues. In this work, we propose a rational design of surface protective coatings to solve this problem. Specifically, a silver (Ag) nanoparticle embedded amorphous AlN matrix (AlN/Ag) protective layer is developed. The former would alloy in situ with Zn to form AgZn3 alloy sites, which subsequently induce the Zn deposition with preferred (002) facets. The latter can effectively alleviate the structural expansion during repeated Zn plating/stripping. Consequently, the delicately designed AlN/Ag@Zn anode delivers an enhanced stability with a long lifespan of more than 2600 h at 1 mA cm-2 and 1 mAh cm-2. Moreover, the AlN/Ag@Zn||Mn1.4V10O24·nH2O full batteries can be operated for over 8000 cycles under 5 A g-1. Our work not only suggests a promising Zn anode protective coating but also provides a general strategy for the rational design of surface protective layers for metal anodes.

A Review on 3D Zinc Anodes for Zinc Ion Batteries.

Zinc ion batteries (ZIBs) have been gradually developed in recent years due to their abundant resources, low cost, and environmental friendliness. Therefore, ZIBs have received a great deal of attention from researchers, which are considered as the next generation of portable energy storage systems. However, poor overall performance of ZIBs restricts their development, which is attributed to zinc dendrites and a series of side reactions. Constructing 3D zinc anodes has proven to be an effective way to significantly improve their electrochemical performance. In this review, the challenges of zinc anodes in ZIBs, including zinc dendrites, hydrogen evolution and corrosion, as well as passivation, are comprehensively summarized and the energy storage mechanisms of the zinc anodes and 3D zinc anodes are discussed. 3D zinc anodes with different structures including fiberous, porous, ridge-like structures, plated zinc anodes on different substrates and other 3D zinc anodes, are subsequently discussed in detail. Finally, emerging opportunities and perspectives on the material design of 3D zinc anodes are highlighted and challenges that need to be solved in future practical applications are discussed, hopefully illuminating the way forward for the development of ZIBs.

Co-Solvent Electrolyte Engineering for Stable Anode-Free Zinc Metal Batteries.

Anode-free metal batteries can in principle offer higher energy density, but this requires them to have extraordinary Coulombic efficiency (>99.7%). Although Zn-based metal batteries are promising for stationary storage, the parasitic side reactions make anode-free batteries difficult to achieve in practice. In this work, a salting-in-effect-induced hybrid electrolyte is proposed as an effective strategy that enables both a highly reversible Zn anode and good stability and compatibility toward various cathodes. The as-prepared electrolyte can also work well under a wide temperature range (i.e., from -20 to 50 °C). It is demonstrated that in the presence of propylene carbonate, triflate anions are involved in the Zn2+ solvation sheath structure, even at a low salt concentration (2.14 M). The unique solvation structure results in the reduction of anions, thus forming a hydrophobic solid electrolyte interphase. The waterproof interphase along with the decreased water activity in the hybrid electrolyte effectively prevents side reactions, thus ensuring a stable Zn anode with an unprecedented Coulombic efficiency (99.93% over 500 cycles at 1 mA cm-2). More importantly, we design an anode-free Zn metal battery that exhibits excellent cycling stability (80% capacity retention after 275 cycles at 0.5 mA cm-2). This work provides a universal strategy to design co-solvent electrolytes for anode-free Zn metal batteries.

Recent Advances in Copper-Doped Titanium Implants.

Titanium (Ti) and its alloys have been extensively used as implant materials in clinical practice due to their high corrosion resistance, light weight and excellent biocompatibility. However, the insufficient intrinsic osteogenic capacity of Ti and its alloys impedes bone repair and regeneration, and implant-related infection or inflammation remains the leading cause of implant failure. Bacterial infections or inflammatory diseases constitute severe threats to human health. The physicochemical properties of the material are critical to the success of clinical procedures, and the doping of Cu into Ti implants has been confirmed to be capable of enhancing the bone repair/regeneration, angiogenesis and antibacterial capability. This review outlines the recent advances in the design and preparation of Cu-doped Ti and Ti alloy implants, with a special focus on various methods, including plasma immersion implantation, magnetron sputtering, galvanic deposition, microarc oxidation and sol-gel synthesis. More importantly, the antibacterial and mechanical properties as well as the corrosion resistance and biocompatibility of Cu-doped Ti implants from different methods are systematically reviewed, and their prospects and limitations are also discussed.

Hierarchical Nanocapsules of Cu-Doped MoS2@H-Substituted Graphdiyne for Magnesium Storage.

Hierarchical nanocomposites, which integrate electroactive materials into carbonaceous species, are significant in addressing the structural stability and electrical conductivity of electrode materials in post-lithium-ion batteries. Herein, a hierarchical nanocapsule that encapsulates Cu-doped MoS2 (Cu-MoS2) nanopetals with inner added skeletons in an organic-carbon-rich nanotube of hydrogen-substituted graphdiyne (HsGDY) has been developed for rechargeable magnesium batteries (RMB). Notably, both the incorporation of Cu in MoS2 and the generation of the inner added nanoboxes are developed from a dual-template of Cu-cysteine@HsGDY hybrid nanowire; the synthesis involves two morphology/composition evolutions by CuS@HsGDY intermediates both taking place sequentially in one continuous process. These Cu-doped MoS2 nanopetals with stress-release skeletons provide abundant active sites for Mg2+ storage. The microporous HsGDY enveloped with an extended π-conjugation system offers more effective electron and ion transfer channels. These advantages work together to make this nanocapsule an effective cathode material for RMB with a large reversible capacity and superior rate and cycling performance.

Surface and Interface Engineering of Zn Anodes in Aqueous Rechargeable Zn-Ion Batteries.

Rechargeable zinc-ion batteries (ZIBs) have shown great potential as an alternative to lithium-ion batteries. The ZIBs utilize Zn metal as the anode, which possesses many advantages such as low cost, high safety, eco-friendliness, and high capacity. However, on the other hand, the Zn anode also suffers from many issues, including dendritic growth, corrosion, and passivation. These issues are largely related to the surface and interface properties of the Zn anode. Many efforts have therefore been devoted to the modification of the Zn anode, aiming to eliminate the above-mentioned problems. This review gives a comprehensive summary on the mechanism behind these issues as well as the recent progress on Zn anode modification with focus on the strategies of surface and interface engineering, covering the design and application of both the Zn anode supports and surface protective layers, along with abundant examples. In addition, the promising research directions and perspective on these strategies are also presented.

Ionically Conductive Tunnels in h-WO3 Enable High-Rate NH4 + Storage.

Compared to the commonly applied metallic ion charge carriers (e.g., Li+ and Na+ ), batteries using nonmetallic charge carriers (e.g., H+ and NH4 + ) generally have much faster kinetics and high-rate capability thanks to the small hydrated ionic sizes and nondiffusion control topochemistry. However, the hosts for nonmetallic charge carriers are still limited. In this work, it is suggested that mixed ionic-electronic conductors can serve as a promising host for NH4 + storage. Using hexagonal tungsten oxide (h-WO3 ) as an example, it is shown that the existence of ionic conductive tunnels greatly promotes the high-rate NH4 + storage. Specifically, a much higher capacity of 82 mAh g-1 at 1 A g-1 is achieved on h-WO3 , in sharp contrast to 14 mAh g-1 of monoclinic tungsten oxide (m-WO3 ). In addition, unlike layered materials, the insertion and desertion of NH4 + ions are confined within the tunnels of the h-WO3 , which minimizes the damage to the crystal structure. This leads to outstanding stability of up to 200 000 cycles with 68% capacity retention at a high current of 20 A g-1 .

Electrostatic Shielding Regulation of Magnetron Sputtered Al-Based Alloy Protective Coatings Enables Highly Reversible Zinc Anodes.

The uncontrolled zinc dendrite growth during plating leads to quick battery failure, which hinders the widespread applications of aqueous zinc-ion batteries. The growth of Zn dendrites is often promoted by the "tip effect". In this work, we propose a generate strategy to eliminate the "tip effect" by utilizing the electrostatic shielding effect, which is achieved by coating Zn anodes with magnetron sputtered Al-based alloy protective layers. The Al can form a surface insulating Al2O3 layer and by manipulating the Al content of Zn-Al alloy films, we are able to control the strength of the electrostatic shield, therefore realizing a long lifespan of Zn anodes up to 3000 h at a practical operating condition of 1.0 mA cm-2 and 1.0 mAh cm-2. In addition, the concept can be extended to other Al-based systems such as Ti-Al alloy and achieve enhanced stability of Zn anodes, demonstrating the generality and efficacy of our strategy.

MXenes for Rechargeable Batteries Beyond the Lithium-Ion.

Research on next-generation battery technologies (beyond Li-ion batteries, or LIBs) has been accelerating over the past few years. A key challenge for these emerging batteries has been the lack of suitable electrode materials, which severely limits their further developments. MXenes, a new class of 2D transition metal carbides, carbonitrides, and nitrides, are proposed as electrode materials for these emerging batteries due to several desirable attributes. These attributes include large and tunable interlayer spaces, excellent hydrophilicity, extraordinary conductivity, compositional diversity, and abundant surface chemistries, making MXenes promising not only as electrode materials but also as other components in the cells of emerging batteries. Herein, an overview and assessment of the utilization of MXenes in rechargeable batteries beyond LIBs, including alkali-ion (e.g., Na+ , K+ ) storage, multivalent-ion (e.g., Mg2+ , Zn2+ , and Al3+ ) storage, and metal batteries are presented. In particular, the synthetic strategies and properties of MXenes that enable MXenes to play various roles as electrodes, metal anode protective layers, sulfur hosts, separator modification layers, and conductive additives in these emerging batteries are discussed. Moreover, a perspective on promising future research directions on MXenes and MXene-based materials, ranging from material design and processing, fundamental understanding of the reaction mechanisms, to device performance optimization strategies is provided.

MXene hydrogels: fundamentals and applications.

Hydrogels have recently garnered tremendous interest due to their potential application in soft electronics, human-machine interfaces, sensors, actuators, and flexible energy storage. Benefiting from their impressive combination of hydrophilicity, metallic conductivity, high aspect ratio morphology, and widely tuneable properties, when two-dimensional (2D) transition metal carbides/nitrides (MXenes) are incorporated into hydrogel systems, they offer exciting and versatile platforms for the design of MXene-based soft materials with tunable application-specific properties. The intriguing and, in some cases, unique properties of MXene hydrogels are governed by complex gel structures and gelation mechanisms, which require in-depth investigation and engineering at the nanoscale. On the other hand, the formulation of MXenes into hydrogels can significantly increase the stability of MXenes, which is often the limiting factor for many MXene-based applications. Moreover, through simple treatments, derivatives of MXene hydrogels, such as aerogels, can be obtained, further expanding their versatility. This tutorial review intends to show the enormous potential of MXene hydrogels in expanding the application range of both hydrogels and MXenes, as well as increasing the performance of MXene-based devices. We elucidate the existing structures of various MXene-containing hydrogel systems along with their gelation mechanisms and the interconnecting driving forces. We then discuss their distinctive properties stemming from the integration of MXenes into hydrogels, which have revealed an enhanced performance, compared to either MXenes or hydrogels alone, in many applications (energy storage/harvesting, biomedicine, catalysis, electromagnetic interference shielding, and sensing).

Made-to-order porous electrodes for supercapacitors: MOFs embedded with redox-active centers as a case study.

In this work, a pre-designed Zr-based-MOF encompassing an organic linker with a redox active core is synthesized and its structure-property relationship as a supercapacitor electrode is investigated. An enhanced performance is revealed by the combination of this MOF's high porosity and redox core incorporation, which alters its double-layer and pseudocapacitance, respectively. An increase in the capacitance performance by a factor of two is achieved via post-synthetic structure rigidification using organic pillars.