Design of Eu3+-Doped Fluoride Phosphor with Zero Thermal Quenching Property Based on Density Functional Theory.

Although being applied in various fields, white light emitting diodes (WLEDs) still have drawbacks that urgently need to be conquered: the luminescent intensity of commercial phosphors sharply decreases at working temperature. In this study, we calculated the forming energy of defects and confirmed that the VNa defect state can stably exist in ß-NaGdF4, by density functional theory (DFT) calculation. Furthermore, we predicted that the VNa vacancies would provide a zero thermal quenching (ZTQ) property for the ß-NaGdF4-based red-light phosphor. Then, a series of ß-NaGdF4:xEu3+ and ß-NaGdF4:0.25Eu3+,yYb3+ red-light phosphors were synthesized by the hydrothermal method. We found that ß-NaGdF4:0.25Eu3+ and ß-NaGdF4:0.25Eu3+,0.005Yb3+ phosphors possess ZTQ properties at a temperature range between 303-483 K and 303-523 K, respectively. The thermoluminescence (TL) spectra were employed to calculate the depth and density of the VNa vacancies in ß-NaGdF4:0.25Eu3+ and ß-NaGdF4:0.25Eu3+,0.005Yb3+. Combining the DFT calculation with characterization results of TL spectra, it is concluded that electrons stored in VNa vacancies are excited to the exited state of Eu3+ to compensate for the loss of Eu3+ luminescent intensity. This will lead to an increase of luminescent intensity at high temperatures and facilitate the samples to improve ZTQ properties. WLEDs were obtained with CRI = 83.0, 81.6 and CCT = 5393, 5149 K, respectively, when phosphors of ß-NaGdF4:0.25Eu3+ and ß-NaGdF4:0.25Eu3+,0.005Yb3+ were utilized as the red-light source. These results indicate that these two phosphors may become reliable red-light sources with high antithermal quenching properties for WLEDs.

Two QTL regions for spike length showing pleiotropic effects on Fusarium head blight resistance and thousand-grain weight in bread wheat (Triticum aestivum L.).

Spike length (SL) plays an important role in the yield improvement of wheat and is significantly associated with other traits. Here, we used a recombinant inbred line (RIL) population derived from a cross between Yangmai 12 (YM12) and Yanzhan 1 (YZ1) to construct a genetic linkage map and identify quantitative trait loci (QTL) for SL. A total of 5 QTL were identified for SL, among which QSl.yaas-3A and QSl.yaas-5B are two novel QTL for SL. The YZ1 alleles at QSl.yaas-2D and QSl.yaas-5A, and the YM12 alleles at QSl.yaas-2A, QSl.yaas-3A, and QSl.yaas-5B conferred increasing SL effects. Two major QTL QSl.yaas-5A and QSl.yaas-5B explained 9.11-15.85% and 9.01-12.85% of the phenotypic variations, respectively. Moreover, the positive alleles of QSl.yaas-5A and QSl.yaas-5B could significantly increase Fusarium head blight (FHB) resistance (soil surface inoculation and spray inoculation were used) and thousand-grain weight (TGW) in the RIL population. Kompetitive allele-specific PCR (KASP) markers for QSl.yaas-5A and QSl.yaas-5B were developed and validated in an additional panel of 180 wheat cultivars/lines. The cultivars/lines harboring both the positive alleles of QSl.yaas-5A and QSl.yaas-5B accounted for only 28.33% of the validation populations and had the longest SL, best FHB resistance (using spray inoculation), and highest TGW. A total of 358 and 200 high-confidence annotated genes in QSl.yaas-5A and QSl.yaas-5B were identified, respectively. Some of the genes in these two regions were involved in cell development, disease resistance, and so on. The results of this study will provide a basis for directional breeding of longer SL, higher TGW, and better FHB resistance varieties and a solid foundation for fine-mapping QSl.yaas-5A and QSl.yaas-5B in future. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-023-01427-8.

Changes of gut microbiota under different nutritional methods in elderly patients with severe COVID-19 and their relationship with prognosis.

Background: The clinical progression of individuals afflicted with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection exhibits significant heterogeneity, particularly affecting the elderly population to a greater extent. Consequently, the association between nutrition and microbiota has garnered considerable interest. Hence, the objective of this study was to gather clinical data pertaining to the influence of diverse nutritional support interventions on the prognosis of geriatric patients with COVID-19, while additionally examining the fecal microbiota of these individuals to assess the repercussions of microecological alterations on their prognostic outcomes. Results: A total of 71 elderly patients diagnosed with severe COVID-19 were included in this study. These patients were subsequently divided into two groups, namely the enteral nutrition (EN) group and the parenteral nutrition (PN) group, based on the type of nutritional support therapy they received after admission. The occurrence of complications was observed in 10.4% of patients in the EN group, whereas it was significantly higher at 69.6% in the PN group (P<0.001). Furthermore, the 60-day mortality rate was 2.1% (1/48) in the EN group, while it was notably higher at 30.4% (7/23) in the PN group (P=0.001). To identify the independent predictors of 60-day mortality, stepwise logistic regression analysis was employed. Among different bacterial groups, Enterococcus_faecium (18.19%) and Pseudomonas_aeruginosa (1.91%) had higher average relative abundance in the PN group (P<0.05). However, the relative abundance of Ruminococcus was higher in the EN group. Further Spearman correlation analysis showed that Enterococcus_faecium was positively correlated with poor clinical prognosis, while Ruminococcus was negatively correlated with poor clinical prognosis. Conclusions: This study shows that the changes in the composition of intestinal flora in elderly COVID-19 patients receiving different nutritional support strategies may be related to different clinical outcomes. The abundance of Enterococcus_faecium in elderly COVID-19 patients receiving PN is significantly increased and is closely related to poor clinical outcomes. It highlights the potential of microbiome-centric interventions to mitigate and manage COVID-19 in older adults with different nutritional support options.

Luminescence Enhancement of K2LiAlF6:Mn4+ Phosphors by Zn2+-Mediated Charge Compensation for Fast-Response Backlighting Applications.

Wide-spectrum displays require narrow-band red phosphors activated by Mn4+, but most of them, such as K2SiF6:Mn4+, have long fluorescence decay lifetimes (>7 ms) that hinder their use in fast-response backlights. Interestingly, K2LiAlF6:0.05Mn4+ has a shorter fluorescence lifetime (3.43 ms), but its disadvantage is that its luminescence intensity is relatively weak. So, in this study, the luminescence intensity of K2LiAlF6:0.05Mn4+ is improved by doping with Zn2+. The experimental results show that enhancement of the luminous intensity is as high as 39%, the fluorescence lifetime is only increased by 13% (3.89 ms), and it is still less than 4 ms. Through experiments and differential charge density calculations, it has been revealed that the luminescence intensity improvement is due to an increased crystalline quality during the synthesis process. Specifically, the co-doping of Zn2+ reduces the formation of impurity ions Mn2+ and Mn3+ and the generation of K+ vacancies caused by nonequivalent doping. We demonstrate the advantage of this phosphor over K2SiF6:Mn4+ in terms of response speed by using a camera. It emits only weak red light after the blue chip stops working for 5 ms, indicating its potential application in next-generation fast-response displays.

Preparation of a Transient Thermal Expansion Rock Cracking Agent by Deposition Method and Its Nonisothermal Kinetics Study with Isoconversional Procedure and DAEM.

Cracking agents are indispensable and important products for national energy exploitation and large-scale infrastructure construction. Transient thermal expansion rock cracking agent is a new cracking agent product with excellent performance that has just appeared in recent years. However, it is still prepared by mechanical ball milling, which is considered not the best choice among traditional methods for preparing energetic materials. In this paper, a transient thermal expansion rock splitting agent was prepared by the chemical deposition method using carbon black and calcium peroxide as raw materials. The TG/DTG results show that the mass loss of the sample can be divided into four stages with the increase of temperature. It is worth noting that the mass loss of the TG curve of the sample during the entire thermal decomposition process is 93.385%, and the instantaneous weight loss is 78.07% (ß = 15 °C/min). Kinetic analysis of the thermal decomposition process of the samples was performed using an isotransformation program and a distributed activation energy model (DAEM). The activation energy E α of the thermal decomposition of the sample was iteratively calculated. The results show that the a-E a curve of the sample can be divided into two stages. The pyrolysis kinetics of the first stage was successfully analyzed by the DAEM method and its thermal conversion behavior was predicted. The thermal decomposition behavior of the second stage was analyzed by a traditional kinetic analysis method.

Mn-Activated Fluoride Phosphors Modified by Surfactant with Outstanding Water Resistance and Luminescent Thermal Properties.

Although Mn4+-activated fluoride phosphors have high luminescence quality, their poor water resistance and thermal fluorescence properties significantly limit their practical applications. Here, we propose a surfactant modification strategy by adding the surfactant cetyltrimethylammonium bromide (CTAB) to the synthesis and modifying the surface of the phosphor with ethylene diamine tetraacetic acid (EDTA) to obtain a phosphor with excellent luminescence thermal properties and water resistance, K2TiF6:Mn4+-xCTAB-EDTA (KTFM-xC-E) phosphors. The experimental and X-ray diffraction Rietveld refinement results confirm that the phosphor has higher structural rigidity and thus improved thermal stability. The surface modification with EDTA resulted in the formation of a dilute Mn4+ shell layer on the phosphor surface, which prevented the inward hydrolysis of the phosphor and resulted in excellent water resistance. Therefore, we have successfully modified K2TiF6:Mn4+ (KTFM) phosphors using low-cost surfactants, which also provides new ideas for other commercial high-quality phosphors.

Exosomes derived from BMSCs ameliorate cyclophosphamide-induced testosterone deficiency by enhancing the autophagy of Leydig cells via the AMPK-mTOR signaling pathway.

Cyclophosphamide-induced testosterone deficiency (CPTD) during the treatment of cancers and autoimmune disorders severely influences the quality of life of patients. Currently, several guidelines recommend patients suffering from CPTD receive testosterone replacement therapy (TRT). However, TRT has many disadvantages underscoring the requirement for alternative, nontoxic treatment strategies. We previously reported bone marrow mesenchymal stem cells-derived exosomes (BMSCs-exos) could alleviate cyclophosphamide (CP)-induced spermatogenesis dysfunction, highlighting their role in the treatment of male reproductive disorders. Therefore, we further investigated whether BMSCs-exos affect autophagy and testosterone synthesis in Leydig cells (LCs). Here, we examined the effects and probed the molecular mechanisms of BMSCs-exos on CPTD in vivo and in vitro by detecting the expression levels of genes and proteins related to autophagy and testosterone synthesis. Furthermore, the testosterone concentration in serum and cell-conditioned medium, and the photophosphorylation protein levels of adenosine monophosphate-activated protein kinase (AMPK) and mammalian target of rapamycin (mTOR) were measured. Our results suggest that BMSCs-exos could be absorbed by LCs through the blood-testis barrier in mice, promoting autophagy in LCs and improving the CP-induced low serum testosterone levels. BMSCs-exos inhibited cell death in CP-exposed LCs, regulated the AMPK-mTOR signaling pathway to promote autophagy in LCs, and then improved the low testosterone synthesis ability of CP-induced LCs. Moreover, the autophagy inhibitor, 3-methyladenine (3-MA), significantly reversed the therapeutic effects of BMSCs-exos. These findings suggest that BMSCs-exos promote LC autophagy by regulating the AMPK-mTOR signaling pathway, thereby ameliorating CPTD. This study provides novel evidence for the clinical improvement of CPTD using BMSCs-exos.

Enhancement of emission and luminescent thermal stability of K2SiF6 : Mn4+ by synergy of co-doping with Na+ and coating with GQDs.

The luminescence properties and thermal stability of phosphors are key properties for practical applications. A series of K2SiF6: Mn4+, Na+ @ GQDs (KSF: Mn4+, Na+ @ GQDs, KSF = K2SiF6, GQDs = graphene quantum dots; here, Cl-contained graphene quantum dots are used) red light phosphors have been synthesized by using a combination of H2O2-free and hydrothermal coating methods. The fluorescence thermal stability and fluorescence intensity of the optimal phosphor are greatly improved by doping the matrix with Na+ and coating it with GQDs. The strong negative thermal quenching (NTQ) effect and the color stability of the phosphor at variable temperatures result in good thermal stability. The strong NTQ effect is attributed to the phonon-induced transition mechanism. The high thermal stability makes the optimal sample ideal for high-power light LEDs (WLEDs). The test results show that the prototype WLED with the optimal sample as the red light component produces warm white light. The light has high luminescent efficiency (101.6 lm W-1), low correlated color temperature (CCT = 3978 K), and high color rendering index (R a = 92.2).

A crystal defect led zero thermal quenching ß-NaYF4 : Eu3+,Dy3+ red emitting phosphor.

Red-light phosphors with extraordinary and stable thermal luminous properties must urgently be explored under the circumstances that commercial phosphors are suffering from serious thermal quenching effects and a lack of red-light components. Synthesized by a one-step hydrothermal method, a new type of NaYF4 : 0.065Eu3+,0.003Dy3+ phosphor with notable thermal luminous stability is reported in this study. As well as energy transfer between Dy3+ and Eu3+, this novel red-light phosphor manifests zero thermal quenching (ZTQ) performance under an increasing temperature of measurement. The ZTQ property stems from the interior defects of the crystal produced by the non-equivalence replacement between distinct ions. Density Functional Theory (DFT) calculations were utilized to verify the formation energy of two kinds of defects that make a vital contribution to the ZTQ performance of the NaYF4 : 0.065Eu3+,0.003Dy3+ phosphor. This finding could make some contributions towards research into improving thermal luminous properties and stability.

Synthesis and optical properties of Gd4Al2O9:Eu3+, a red emitting phosphor with a strong negative thermal quenching effect.

For the purpose of obtaining red-light phosphors with excellent luminescence thermal stability, a series of Gd4Al2O9:Eu3+ (GAO:Eu3+) phosphors were synthesized by combining the sol-gel method with high-temperature calcination, and a detailed series of study and analysis of their room temperature and high temperature luminescence properties was carried out. In GAO, the emission peaks corresponding to the 5D0 → 7F j (j = 0, 1, 2, 3 and 4) transitions of Eu3+ were observed at 578, 590, 610, 654, and 707 nm, with the strongest emission peak at 610 nm, and the obtained samples were red-light phosphors. The sample GAO:Eu3+ synthesized by combining the sol-gel method with high-temperature calcination has a negative thermal quenching (NTQ) effect, and the best doped sample GAO:0.16Eu3+ has an optimal luminescence temperature of 120 °C, and the corresponding integrated PL intensity is 183.2% of the initial value at 30 °C. The presence of the NTQ effect makes GAO:0.16Eu3+ have good luminescence thermal stability, which manifests as thermal-optical energy conversion at the macroscopic level. A detailed study of the thermal quenching mechanism was carried out.

Enhancement in the water resistance and thermal stability of Na3HTiF8:Mn4+ by co-doping with organic amine cations.

Mn4+-doped fluoride red light phosphors are widely utilized in various fields, and their luminous performance is influenced by their stability in high humidity and temperature environments. By incorporating TEOAH+ (TEOAH+ = (HOCH2CH2)3NH+) into the Na2TiF6 matrix, Na3HTiF8:Mn4+,TEOAH+ with improved thermal stability and water resistance was synthesized. Enhancement in the luminescence thermal stability is supported by its strong negative thermal quenching (NTQ) effect, which is attributed to the phonon-induced mechanism wherein the probability of radiative transitions increases much faster than the probability of non-radiative transitions. Additionally, the integrated emission intensity of the optimal sample Na3HTiF8:Mn4+,0.15TEOAH+ was maintained at 70.1% after being immersed in water for 360 min, which may be attributed to the addition of TEOAH+ cations in the structure, thus increasing its structural rigidity. The prototype light-emitting diode (LED) has a narrow emission band, 88.6% color gamut, and 83.1 lm W-1 light efficiency, according to the National Television Standards Committee (NTSC). The qualities of the phosphor make it an ideal candidate for back-lighting devices.

Preparation, structural characterization and prebiotic potential of mulberry leaf oligosaccharides.

The present study shows the purification of a main oligosaccharide fraction (MLO 1-2) from the enzymatic hydrolysate of mulberry leaf polysaccharides by DEAE-52 cellulose and gel column chromatography. The physicochemical properties of MLO 1-2 were characterized. The structure of MLO 1-2 was obtained as follows: α-(2-OAc)-Manp-1 → 2-ß-Glcp-1 → 4-ß-Glcp-1 → 4-α-Glcp-1 → 2-α-Glcp-1 → 2-α-Galp-1 → 2-ß-Galp-1 → 2-ß-Galp-1, which was elucidated by methylation and NMR analysis. The molecular weight of MLO 1-2 showed no significant change after simulated saliva, gastric and intestinal digestion. This indicated that MLO 1-2 could pass through the digestive system without being degraded to safely reach the colon to regulate the gut microbiota. Additionally, MLO 1-2, more than glucose or galactooligosaccharides, promoted the proliferation of Bifidobacterium bifidum, B. adolescentis, Lacticaseibacillus rhamnosus and Lactobacillus acidophilus. Furthermore, the acetic and lactic acid concentrations of bacterial cultures inoculated with MLO 1-2 were higher than those inoculated with glucose and galactooligosaccharide (GOS). These results suggest that MLO 1-2 could be an excellent prebiotic for intestinal flora regulation and the promotion of gut health.

An organic-inorganic hybrid K2TiF6 : Mn4+ red-emitting phosphor with remarkable improvement of emission and luminescent thermal stability.

A new type of monoethanolamine (MEA) and Mn4+ co-doped KTF : MEAH+, Mn4+ (K2TiF6 : 0.1MEAH+, 0.06Mn4+) red emitting phosphor was synthesized by an ion exchange method. The prepared Mn4+ co-doped organic-inorganic hybrid red phosphor exhibits sharp red emission at 632 nm and the emission intensity at room temperature is 1.43 times that of a non-hybrid control sample KTF : Mn4+ (K2TiF6 : 0.06Mn4+). It exhibits good luminescent thermal stability at high temperatures, and the maximum integrated PL intensity at 150 °C is 2.34 times that of the initial value at 30 °C. By coating a mixture of KTF : MEAH+, Mn4+, a yellow phosphor (YAG : Ce3+) and epoxy resin on a blue InGaN chip, a prototype WLED (white light-emitting diode) with CCT = 3740 K and R a = 90.7 is assembled. The good performance of the WLED shows that KTF : MEAH+, Mn4+ can provide a new choice for the synthesis of new Mn4+ doped fluoride phosphors.

High Water Resistance and Luminescent Thermal Stability of LiyNa(2-y)SiF6: Mn4+ Red-Emitting Phosphor Induced by Codoping of Li.

Mn4+-doped fluoride phosphors are efficient narrowband red-emitting phosphors for white light-emitting diodes (WLEDs) and backlight displays. However, erosion by moisture is the main obstacle that limits their application. In this work, LNSF:Mn4+ (Li0.06Na1.94Si0.94Mn0.06F6) with high quantum yield (QY), luminescent thermal stability, and waterproofness was synthesized using the H2O2-free reaction method at room temperature. Compared to NSF:Mn4+(Na2Mn0.06Si0.94F6), the QY value, luminescence thermal stability, and water resistance of LNSF:Mn4+ are obviously improved by codoping of Li+ because of the formation of charge-carrier transfer (CT) and rare-Mn4+ layer induced by codoping of Li+. The former produces the negative thermal quenching (NTQ) effect, which results in the improvement of the luminescent thermal stability. The latter can inhibit the hydrolysis of Mn4+ on the surface of the sample, which leads to the enhancement of waterproofness. The formation mechanism of the rare-Mn4+ layer is discussed. A prototype WLED emitting the ideal warm white light (CCT = 3173 K, Ra = 90.4) was assembled by coating a mixture of LNSF:Mn4+, yellow emitting phosphor (YAG:Ce3+), and epoxy resin on the blue light InGaN chip, indicating that the performance of the WLED can be improved by using LNSF:Mn4+.

Crystal defect induced zero thermal quenching ß-NaYF4: Eu3+, Sm3+ red-emitting phosphor.

Red phosphors with brilliant performance are crucial for the application of white LEDs as their red-light component. However, the thermal quenching phenomenon is an inevitable obstacle in the practical application of various types of red-light phosphors. In this study, we report the preparation of a novel type of phosphor, NaYF4: 0.065Eu3+, 0.002Sm3+, possessing not only an energy transfer effect from Sm3+ to Eu3+ but also superior negative thermal quenching (NTQ) performance. The phosphor was synthesized via a one-step hydrothermal method, resulting in a prominent improvement in its luminous thermal stability supported by NTQ. The NTQ originated from the thermal stimulation excitement of the captured electrons in electronic traps, which is attributed to the non-equivalence between the different types of ions. The shape of the emission spectrum measured at high temperature was identical to that measured at room temperature, which not only showed the remarkable thermal stability of this novel type of phosphor but also the promising prospect of its practical application. This finding will contribute to improving the thermal stability of phosphor materials doped with lanthanide elements.

[Bone marrow mesenchymal stem cell-derived exosomes protect TM3 Leydig cells from cyclophosphamide-induced injury].

OBJECTIVE: To investigate the effect of exosomes derived from mouse bone marrow mesenchymal stem cells (BMSC) on the injury of TM3 Leydig cells induced by cyclophosphamide (CP). METHODS: The exosomes from BMSCs were extracted by ultrahigh speed centrifugation, and their particle size and morphology observed under the electron microscope, and their typical marker proteins examined by Western blot. The uptake of exosomes by TM3 Leydig cells was observed by co-culturing the exosomes with the TM3 cells. The viability and apoptosis rate of the TM3 cells in the normal control, CP-induction and CP+exosomes groups were detected using the CCK-8 method and flow cytometry respectively. ELISA was used to measure the testosterone (T) level in the cell supernatant, and Western blot adopted to determine the expression level of the steroidogenic acute regulatory (StAR) protein, a key enzyme related to T synthesis. RESULTS: The viability of the TM3 Leydig cells was markedly decreased and the apoptosis rate of the cells remarkably increased in the CP-induction group compared with that in the normal control, but both significantly restored after co-culture with exosomes (P < 0.01 and P < 0.05). The T level in the supernatant and the expression of the StAR protein in the cells were lower in the CP-induction than in the normal control group, but both dramatically increased in the CP+exosomes group (P < 0.01). CONCLUSION: Exosomes from BMSCs and protect TM3 Leydig cells from cyclophosphamide-induced injury and restore the level of testosterone secreted by the TM3 cells to a certain extent.

The hypoglycemic effect of freeze-dried fermented mulberry mixed with soybean on type 2 diabetes mellitus.

Mulberry has significant hypoglycemic effect and can be used as an auxiliary food for people with type 2 diabetes. However, it is rich in carbohydrate and cannot be consumed directly by diabetic patients. In the study, we fermented the mulberry to reduce the content of glucose and fructose, and added the soybean to reduce the loss of probiotics during fermentation and then determined its hypoglycemic effect. We induced type 2 diabetes mellitus (T2DM) mice by streptozotocin and measured its blood glucose, serum biochemistry, hepatic and pancreatic histopathology, and the diversity of the gut microbiota. After 5 weeks of oral DFMS administration, the glucose tolerance was improved significantly in T2DM mice. Furthermore, there were also significant increases in superoxide dismutase activity and glutathione concentration, and marked reductions in the concentrations of malondialdehyde and free fatty acids. Moreover, DFMS also prevented histopathological changes and the increases in the activities of alanine transaminase and aspartate transaminase. DFMS treatment also markedly increased the richness of the gut microbial community. The abundance of Bacteroidetes was increased, and those of Proteobacteria, Escherichia-Shigella, and Lactobacillus were reduced. In summary, DFMS has a clear hypoglycemic effect in mice with T2DM.

Fluorescent nitrogen-doped carbon dots for high selective detecting p-nitrophenol through FRET mechanism.

A facile, friendly and one-step hydrothermal protocol was used to synthesize nitrogen-doped carbon dots (N-CDs) by utilizing hexamethylenetetramine and ethanediamine as the carbon and nitrogen sources. It demonstrated good water solubility and fluorescence properties were stable, whether in acidic or alkaline. Quantum yield (QY) of N-CDs was 8.3% at an excitation wavelength of 325 nm with maximum emission at 425 nm. The fluorescence of N-CDs achieved very high fluorescence quenching of 60% in the detection of p-nitrophenol (p-NP) in aqueous medium via fluorescence resonance energy transfer (FRET) mechanisms. Under optimum conditions, fluorescence probs of N-CDs had strong selectivity to p-NP, and the fluorescence intensity was linearly proportional to p-NP concentration from 0.5 to 70.0 µM with a detection limit of 0.201 µM. The corresponding cell experiments were also performed, indicating that the prepared N-CDs possessed low cytotoxicity and good biocompatibility. Meanwhile, the N-CDs can be used for the determination of p-NP in river water and industrial wastewater.

Effects of enzymatic hydrolysis on the structural, rheological, and functional properties of mulberry leaf polysaccharide.

Effects of enzymatic hydrolysis on the structural, rheological, and functional properties of mulberry leaf polysaccharide (MLP) were characterized in this study. The enzymatic hydrolysis of MLP raised the carbonyl, carboxyl, and hydroxyl groups from 7.21 ± 0.86 to 10.08 ± 0.28 CO/100 Glu, 9.40 ± 0.13 to 17.55 ± 0.34 COOH/100 Glu, and 5.71 ± 0.33 to 8.14 ± 0.24 OH/100 Glu, respectively. Meanwhile, an increase in thixotropic performance and structure-recovery capacities were observed in hydrolyzed MLP, while the molecular weight, surface tension, apparent viscosity, and thermal stability were decreased. An improved antioxidant activity of MLP was also achieved after the enzymatic degradation. Moreover, the hydrolyzed MLP showed greater ability to promote the growths of Bifidobacterium bifidum, Bifidobacterium adolescentis, Lactobacillus rhamnosus, and Lactobacillus acidophilus and the production of acetic acid, butyric acid, and lactic acid. The results demonstrate that enzymatic modification is a useful approach for polysaccharide processing.

Improvement in luminescent properties and thermo-optical conversion mechanism of Na2SiF6:Mn4+,K+@GQDs.

Herein, a series of NSF:0.05Mn4+,0.04K+@GQD (NSF: Na2SiF6, GQDs: Cl-containing graphene quantum dot) phosphors was prepared. Double enhancement effects on the luminescent intensity and thermal stability triggered by the GQD coating were observed for the optimal sample as follows: (a) its PL intensity was 1.72 times that of the uncoated control sample and (b) its luminescent thermal stability was greatly enhanced, with integrated PL intensities of 120, 150 and 180 °C to 179.7%, 175.8%, and 119.3% of the initial value at 25 °C, respectively. It is proposed that the above-mentioned behaviors involve a change in some of the thermal energy into light energy via a phonon-induced mechanism. The thermal stability analysis results showed that the optimal sample is suitable for application in high-power WLEDs. Specifically, warm white light with a low correlated color temperature, high luminescent efficiency and high color rendering index was obtained from the prototype WLEDs using the optimal sample as a red-emitting component.