Consensus Recommendations for Treatment of the Upper Face With LetibotulinumtoxinA.

One of the authors (K-H. Y.) convened a panel of seven aesthetic experts from South Korea and Australia to create guidelines for treating facial lines of the upper face with letibotulinumtoxinA. The panel members provided recommendations for injection sites, dosage, and injection techniques for using letibotulinumtoxinA and also considered relevant anatomy, patient assessment and selection, and individual variations to evaluate clinical strategies for minimizing complications. The panelists provided recommendations for treating forehead horizontal lines, glabellar frown lines, and lateral canthal lines. The guidelines developed by the panel will support clinical practitioners of all skill levels in providing safe and effective aesthetic treatments of the forehead, glabellar complex, and lateral canthal lines with letibotulinumtoxinA.

Lower Eyelid Dark Circles (Tear Trough and Lid-Cheek Junction): A Stepwise Assessment Framework.

BACKGROUND: Despite increasing popularity, the use of hyaluronic acid (HA) fillers for the correction of dark under-eye shadows remains challenging. Specific guidance on patient assessment is limited. OBJECTIVES: The aim of this study was to develop a stepwise assessment framework for lower eyelid dark shadows to help practitioners classify patients based on their underlying problems and facilitate a more strategic approach to treatment. METHODS: Literature review and peer collaboration informed the current availability of educational material for use by experienced injectors when assessing patients presenting with dark circles. A practitioner survey provided insight into current practices. A focus group convened to review the survey results and discuss best practice approaches to patient assessment. RESULTS: Surveyed practitioners (n = 39) reported patient concern about under-eye hollows (91%), dark eye circles (80%), and looking tired (60%). All (100%) agreed that midcheek volume was critical when treating tear-trough depression, and only 26% reported use of a tear-trough classification system. The focus group developed a framework for assessing tear-trough depression and the lid-cheek junction in patients presenting with dark circles. Key factors within this framework included the importance of appropriate lighting when conducting a visual inspection, regional inspection of the cheek and tear trough, palpation of the orbital rim and soft tissues, determination of the orbital vector, and assessment of lower eyelid pigmentation and skin quality. CONCLUSIONS: Careful step-by-step assessment can reduce the challenges of treating dark circles by identifying patients in whom dark eye circles may be improved without the need to directly inject filler into the tear trough.

Simplifying the injector's armamentarium: An international consensus regarding the use of gel science to differentiate hyaluronic acid fillers and guide treatment recommendations.

BACKGROUND: The Restylane portfolio of soft tissue fillers spans a wide range of indications, due in part to their complementary manufacturing technologies [non-animal stabilized hyaluronic acid (NASHA) and Optimal Balance Technology (OBT/XpresHAn)]. Using an array of products, injectors can achieve a holistic, natural looking effect for their patients. However, with a wide range of products it may be difficult to choose an optimal combination. AIM: Simplify and align global use recommendations for NASHA versus OBT products. METHODS: Two pre-meeting surveys were completed by 11 key opinion leaders with international representation, with the goal of collecting information regarding their current injection practices for various anatomical regions of the face (i.e., temporal region, forehead, tear trough, lateral zygoma, anteromedial cheek, nose, pyriform aperture, nasolabial fold, perioral area, lips, labiomental crease, marionette lines, chin, and jawline). The data collected from these surveys was subsequently discussed in a consensus group meeting involving 11 voting members and 3 nonvoting members. RESULTS: Top product recommendations were identified for each anatomical area, along with secondary and tertiary recommendations that can also be used under defined circumstances. Recommendations were provided based on a consideration of elements such as patient features (e.g., skin thickness, bone structure), the desired aesthetic outcome, experience of the injector, and the preferred injection technique. CONCLUSION: A majority consensus regarding the top NASHA versus OBT product choice for each anatomical region of the face was reached. These recommendations represent international agreement regarding the use of Restylane products.

Filler-based correction of tear trough depressions and eye bags in Japanese patients: A classification system and treatment algorithm.

BACKGROUND: Tear trough depressions are widely treated with fillers. However, it is questionable whether the same strategies can always be used for Caucasian and Japanese patients, owing to differences in bone and skin structures and epithelial thickness. AIMS: To assess a novel classification system and treatment algorithm for correcting tear trough depressions and eye bags in Japanese patients. METHODS: Tear trough depressions can be classified into three types according to the presence or absence of a "negative vector" based on retrusion of the maxilla relative to the anterior corneal surface, with or without eye-bag protrusion when smiling. Type 1 patients (without the negative vector) can be treated simply by filling the depression in the tear trough and the palpebromalar groove region. Type 2 patients (with a negative vector and no eye-bag protrusion on smiling) also require volume restoration in the mid-cheek (deep medial cheek fat, suborbicularis oculi fat, and pre-maxillary space); this not only enables volume recovery but also compensates for maxillary deficiency. Type 3 patients (with a negative vector and eye-bag protrusion on smiling) require an additional step, based on placing a filler in front of the eye bags and pushing orbital fat backward. RESULTS: Case presentations demonstrate the utility of the techniques involved. CONCLUSIONS: This system provides a simple and practical method for classifying and treating Japanese patients with tear trough depressions and eye bags. Further studies are warranted.

The Importance of Patient Mindset: Cosmetic Injectable Patient Experience Exploratory Study-Part 1.

Background: To meet the needs of each individual cosmetic injectable patient, focus is moving toward a detailed, patient-centered, holistic consultation with pretreatment exploration of the patient's mindset. The Cosmetic Injectables Patient Experience Exploratory Study (CIPEES) was developed to explore patient motivation, mindset, engagement, and factors impacting the patient-practitioner relationship. Objectives: In order to best meet the needs of individual aesthetic patients, the authors examine the variability and importance of mindset factors in patients seeking cosmetic injectables. Methods: A study was conducted through an online survey. Participants were asked to respond to a series of statements concerning their thoughts and feelings around appearance, treatment goals, and motivating factors. Participants were asked to select one of the following: "describes me well," "somewhat describes me," or "does not describe me." Results: In total, 1269 participants completed the relevant survey question. Respondents were 95.6% female and 4.4% male, with ages ranging from 18 to > 65 years old (median 33 years old). Responses were also analyzed according to age group. Data analysis revealed a majority of respondents seeking natural results, with a 15%-20% minority considering a "done" look to be acceptable or even ideal. High numbers of respondents reported being critical of their own appearance and concerned about a specific feature to be "fixed." Conclusions: Exploring the nuances of patient mindset will assist practitioners in meeting the unique needs of each patient and may also help them to avoid treating patients whose requirements or expectations are outside their circle of competence.

Movement of the Syringe During Filler Aspiration: An Ultrasound Study.

BACKGROUND: Aspiration prior to hyaluronic acid filler injection is often taught as a safety maneuver to minimize the risk of intravascular injection; however, the validity of this technique in aesthetic practice is being increasingly challenged. One key assumption underpinning the validity of the aspiration test is that the needle tip does not move during the aspiration and subsequent injection of filler. OBJECTIVES: The aim of this study was to visualize and measure needle tip movement in real time during aspiration and injection of filler. Secondary objectives were to assess the impact of injector experience and double-handed versus single-handed aspiration technique in maintaining stability of the syringe. METHODS: Under real-time ultrasound visualization, 3 injectors with different levels of experience injected hyaluronic acid filler into pork belly tissue utilizing both double-handed and single-handed aspiration techniques. Needle tip movements were recorded and measured by means of ultrasound and video. RESULTS: The aspiration maneuver is in all cases associated with retrograde movement of the needle tip, ranging from 1.1 to 5.3 mm (mean, 2.9 mm), whereas injection leads to anterograde movement ranging from 0.6 to 4.1 mm (mean, 1.9 mm). Double-handed aspiration is associated with less needle tip movement than single-handed aspiration (P = 0.037). Greater experience is also associated less movement of the needle tip (P < 0.0001). CONCLUSIONS: In all cases, the aspiration and injecting maneuver is associated with micromovements of the needle tip, of a magnitude consistently significant relative to the typical size of facial vessels. Although needle tip movement is only a single factor limiting the usefulness of the aspiration test, the results of this study suggest that it is not advisable to rely only on aspiration as a method to prevent intravascular injection.

Tear Trough and Lid-Cheek Junction Anatomy: Current Understanding and Nonsurgical Treatment.

The tear trough and lower eyelid are sentinel sites of facial aging and are increasingly the target of nonsurgical aesthetic procedures. This article will review the advances that have led to our current understanding of tear trough anatomy. We propose a new functional classification of the lid-cheek junction for soft tissue filler treatment, and suggest simpler stratification of patients seeking lower eyelid treatment based on the etiology of their tear trough depression. We aim to describe a stepwise approach to management, with specific technical considerations targeting the underlying causes of lower eyelid pathology. The common complications and pitfalls of nonsurgical tear trough management will be discussed.

Chin Microgenia: An Anthropometric Analysis on the Prevalence and Severity in a Chinese Population.

BACKGROUND: The chin is an important component of facial harmony, and deficient chins are associated with unattractiveness. Previous studies have reported microgenia as the most common subtype of chin deformities. OBJECTIVE: To investigate the prevalence and severity of microgenia in a Chinese population through facial anthropometric analysis. METHODS: A total of 800 Han Chinese adults from various age groups of both sexes were recruited for facial anthropometric measurements and photographic analysis. Chin deficiencies in both sagittal and vertical dimensions were evaluated using G-S-P angle, chin retrusion distance, and Sn-Vl/Sn-Me ratio criteria. RESULTS: In the sagittal dimension, microgenia was present in 60.7% of men and 68.6% of women according to the G-S-P angle criterion, and the angle significantly decreased with age in women (p < .05). According to the chin retrusion criterion, microgenia was present in 38.7% of men and 32.3% of women, and the retrusion distance significantly increased with age in both sexes (p < .05). Vertical microgenia was present in 69.6% of men and 81.9% of women according to the Sn-Vl/Sn-Me criterion, and the ratio gradually increased with age in both sexes (p < .05). CONCLUSION: Microgenia is common among Chinese, particularly in women, and the prevalence and severity increase with age.

Consensus Recommendations on the Use of Hyaluronic Acid-Based Fillers for Nonsurgical Nasal Augmentation in Asian Patients.

BACKGROUND: Nonsurgical nasal augmentation using dermal fillers such as hyaluronic acid is increasing in popularity because of its less invasive nature and shorter downtime compared with traditional surgery. However, the complexity of the nasal vasculature makes it a high-risk procedure without proper training. Appropriate patient and product selection and safer standardized injection techniques are warranted to minimize complications and to achieve reproducible aesthetic results. In this article, recommendations for nonsurgical nasal augmentation using hyaluronic acid fillers are outlined, with focus on the dorsum, tip, and columella. METHODS: A consensus meeting was conducted to develop recommendations on nonsurgical nasal augmentation in Asian patients using hyaluronic acid-based fillers. Literature review was performed using PubMed and Google Scholar. Relevant studies were included to formulate recommendations. Consensus statements were graded using the criteria outlined by the Grading of Recommendations Assessment, Development and Evaluation Working Group. RESULTS: Nonsurgical nasal augmentation is an advanced procedure that warrants in-depth knowledge of the nasal anatomy. The panel recommends thorough preinjection assessment and counseling to fully align the patient's expectations with aesthetic goals. Injections must be deep and at the level of the periosteum or perichondrium to minimize risk of intravascular injection. Aliquots of hyaluronic acid must be introduced using slow, low-pressure, and low-volume injections. Optimal aesthetic effect is achieved with hyaluronic acid dermal fillers that are highly elastic, cohesive, and with good adaptability to their environment. CONCLUSIONS: Hyaluronic acid injections are safe and effective in nonsurgical nasal augmentation. In-depth knowledge of vascular anatomy and proper injection techniques using suitable products are necessary to achieve aesthetic goals safely. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Aspiration Before Tissue Filler-An Exercise in Futility and Unsafe Practice.

BACKGROUND: Aesthetic physicians rely on certain anecdotal beliefs regarding the safe practice of filler injections. These include a presumed safety advantage of bolus injection after a negative aspiration. OBJECTIVES: The authors sought to review and summarize the published literature on inadvertent intravascular injection of hyaluronic acid and to investigate whether the technique of aspiration confers any safety to the practitioner and the patient. METHODS: Pertinent literature was analyzed and the current understanding of the safety of negative and positive aspiration outlined. RESULTS: The available studies demonstrate that aspiration cannot be relied on and should not be employed as a safety measure. It is safer to adopt injection techniques that avoid injecting an intravascular volume with embolic potential than utilize an unreliable test to permit a risky injection. CONCLUSIONS: To prevent intravascular injection, understanding "injection anatomy" and injection plane and techniques such as slow, low-pressure injection are important safety measures. Assurance of safety when delivering a bolus after negative aspiration does not appear to be borne out by the available literature. If there is any doubt about the sensitivity or reliability of a negative aspiration, there is no role for its utilization. Achieving a positive aspiration would just defer the risk to the next injection location where a negative aspiration would then be relied on.

Anatomy behind the Paramedian Platysmal Band: A Combined Cadaveric and Computed Tomographic Study.

BACKGROUND: The muscular hypothesis explanation of the pathophysiology behind paramedian platysmal bands does not seem to provide a sufficient explanation for the clinical presentation of these platysmal bands in aged individuals with cervical soft-tissue laxity. The purpose of this study was to investigate the fascial relationships of the anterior neck to enhance appropriate surgical treatment. METHODS: Retrospective analysis of computed tomographic scans of 50 Caucasian individuals (mean age, 55.84 ± 17.5 years) and anatomical dissections of 20 Caucasian and 10 Asian body donors (mean age, 75.88 ± 10.6 years) were conducted. Fascial adhesions were classified according to platysma fusion types, and platysma mobility was tested during dissection procedures. RESULTS: Fusion between the left and right platysma muscles occurred in 64 percent in the suprahyoid region and in 20 percent at the thyroid cartilage, and in 16 percent, the platysma attached to the mandible without fusion. In the absence of muscular fibers, a fascial adhesion zone with limited mobility was observed where the superficial cervical fascia fused with the investing layer of the deep cervical fascia. CONCLUSIONS: Muscular contraction of the platysma results in elevation of the most medial platysma muscle fibers, which are not attached in the fascial adhesion zone. The presence of a fatty layer deep to the platysma enables platysmal movement and anterior and inferior gliding of the skin and platysma when cervical soft-tissue laxity exists. Surgical treatments should include transection of the fascial adhesion; this could potentially prevent the recurrence of paramedian platysmal bands.

Influence of Rheological Properties and Needle Size on Extrusion Forces of Hyaluronic Acid Based Soft Tissue Fillers.

BACKGROUND: To date no precise data are available for extrusion forces related to the G-prime and G-double-prime of fillers in combination with different 27G and 30G needles. Therefore, the objective of this study was to analyze extrusion forces of various product-needle-combinations containing two different 27G and two different 30G needles in combination with fillers of a wide range of elastic moduli starting from 2.0 – 166.0 Pa. MATERIAL AND METHODS: Four different fillers with the following elastic moduli 1.87, 11.65, 61.80, 165.50 Pa were combined with four different needles: 27G ½”, internal diameter: 0.300 μm; 27G ½”, internal diameter: 0.241 μm; 30G ½”, internal diameter: 0.241 μm and 30G ½“, internal diameter: 0.240 μm. Product-needle-combination were subjected to uni-axial mechanical testing and the respective extrusion force was measured. RESULTS: The results of this study revealed that the G-prime and the G-double-prime of a product are statistically significantly related to their extrusion force, with higher G-prime/G-double-prime products requiring higher extrusion forces. The results additionally revealed that whether the size of the needle was described as 27G or 30G by the respective manufacturer statistically significant differences between the measured extrusion forces were detected. CONCLUSION: Injectors need to be aware that not every 27G/30G needle has the same extrusion force even though the external diameter is similar (27G or 30G); this might additionally influence the ability to withdraw blood during a pre-injection aspiration manoeuvre. J Drugs Dermatol. 20(5): doi:10.36849/JDD.5237.

The Facial Aging Process From the "Inside Out".

The normal course of aging alters the harmonious, symmetrical, and balanced facial features found in youth, not only impacting physical attractiveness but also influencing self-esteem and causing miscommunication of affect based on facial miscues. With this evidence-based paper, the authors aim to provide a comprehensive overview of the latest research on the etiology and progression of facial aging by explaining the aging process from the "inside out," that is, from the bony platform to the skin envelope. A general overview of the changes occurring within each of the main layers of the facial anatomy is presented, including facial skeleton remodeling, fat pad atrophy or repositioning, changes in muscle tone and thickness, and weakening and thinning of the skin. This is followed by an in-depth analysis of specific aging regions by facial thirds (upper, middle, and lower thirds). This review may help aesthetic physicians in the interpretation of the aging process and in prioritizing and rationalizing treatment decisions to establish harmonious facial balance in younger patients or to restore balance lost with age in older patients.

Comparison of Single- Versus Dual-Vector Technique Using Facial Suspension Threads: A Cadaveric Study Using Skin Vector Displacement Analysis.

BACKGROUND: Facial suspension threads have been successfully used for facial soft-tissue repositioning. When using facial suspension threads, it is unclear which technique and/or material has the greatest lifting effect for the middle and lower face or which technique/material best reduces the appearance of the jowls. MATERIAL AND METHODS: Three female and 2 male cephalic specimens of Caucasian ethnicity (65.2 ± 8.3 years; 20.72 ± 2.6 kg/m) were analyzed in an upright secured position. Polydioxanone and polycaprolactone bidirectional barbed facial suspension threads were introduced by an 18 G, 100 mm cannula. The single-vector technique aimed toward the labiomandibular sulcus, and the dual-vector technique aimed toward the labiomandibular sulcus and the mandibular angle. Computation of vertical lifting, horizontal lifting, and volume reduction at the jowls and along the jawline were calculated using 3D imaging. RESULTS: The dual-vector technique effected a greater vertical lifting effect (4.45 ± 2.78 mm vs 2.99 ± 2.23 mm) but a reduced horizontal lifting effect (0.33 ± 1.34 mm vs 0.49 ± 1.32 mm). The dual-vector technique effected less volume reduction at the jowls 0.32 ± 0.24 cc versus 0.41 ± 0.46 cc and less volume reduction along the jawline 0.46 ± 0.48 cc versus 0.87 ± 0.53 cc (dual-vector vs single-vector). CONCLUSION: This study provides evidence resulting from cadaveric observations for the overall nonsuperiority of the dual-vector technique compared with the single-vector technique.

Consensus on Changing Trends, Attitudes, and Concepts of Asian Beauty.

BACKGROUND: Asians increasingly seek non-surgical facial esthetic treatments, especially at younger ages. Published recommendations and clinical evidence mostly reference Western populations, but Asians differ from them in terms of attitudes to beauty, structural facial anatomy, and signs and rates of aging. A thorough knowledge of the key esthetic concerns and requirements for the Asian face is required to strategize appropriate facial esthetic treatments with botulinum toxin and hyaluronic acid (HA) fillers. METHODS: The Asian Facial Aesthetics Expert Consensus Group met to develop consensus statements on concepts of facial beauty, key esthetic concerns, facial anatomy, and aging in Southeastern and Eastern Asians, as a prelude to developing consensus opinions on the cosmetic facial use of botulinum toxin and HA fillers in these populations. RESULTS: Beautiful and esthetically attractive people of all races share similarities in appearance while retaining distinct ethnic features. Asians between the third and sixth decades age well compared with age-matched Caucasians. Younger Asians' increasing requests for injectable treatments to improve facial shape and three-dimensionality often reflect a desire to correct underlying facial structural deficiencies or weaknesses that detract from ideals of facial beauty. CONCLUSIONS: Facial esthetic treatments in Asians are not aimed at Westernization, but rather the optimization of intrinsic Asian ethnic features, or correction of specific underlying structural features that are perceived as deficiencies. Thus, overall facial attractiveness is enhanced while retaining esthetic characteristics of Asian ethnicity. Because Asian patients age differently than Western patients, different management and treatment planning strategies are utilized. Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Consensus on Current Injectable Treatment Strategies in the Asian Face.

BACKGROUND: The desire for and use of nonsurgical injectable esthetic facial treatments are increasing in Asia. The structural and anatomical features specific to the Asian face, and differences from Western populations in facial aging, necessitate unique esthetic treatment strategies, but published recommendations and clinical evidence for injectable treatments in Asians are scarce. METHODS: The Asian Facial Aesthetics Expert Consensus Group met to discuss current practices and consensus opinions on the cosmetic use of botulinum toxin and hyaluronic acid (HA) fillers, alone and in combination, for facial applications in Southeastern and Eastern Asians. Consensus opinions and statements on treatment aims and current practice were developed following discussions regarding pre-meeting and meeting survey outcomes, peer-reviewed literature, and the experts' clinical experience. RESULTS: The indications and patterns of use of injectable treatments vary among patients of different ages, and among Asian countries. The combination use of botulinum toxin and fillers increases as patients age. Treatment aims in Asians and current practice regarding the use of botulinum toxin and HA fillers in the upper, middle, and lower face of patients aged 18 to[55 years are presented. CONCLUSIONS: In younger Asian patients, addressing proportion and structural features and deficiencies are important to achieve desired esthetic outcomes. In older patients, maintaining facial structure and volume and addressing lines and folds are essential to reduce the appearance of aging. This paper provides guidance on treatment strategies to address the complex esthetic requirements in Asian patients of all ages. LEVEL OF EVIDENCE V: This journal requires that the authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Re Facial aesthetic injections in clinical practice: Pretreatment and post-treatment consensus recommendations to minimise adverse outcome Region-specific changes in line with the Covid-19 pandemic.

Despite the recent publication in March 2020 of guidelines for facial injectable treatments, the speed of the COVID-19 pandemic and its safety implications necessitate changes to these guidelines The authors described what would constitute safest practice in the provision of facial injectable treatments and summarised these in table form. Adherence to a high standard of asepsis and infectious disease precautions remain a key patient safety requirement when performing facial aesthetic injections. A revision and update of these guideline summary tables follows. Changes made should enhance both patient and staff safety regarding COVID-19/SARS-CoV-2, a highly infective respiratory pathogen transmitted by respiratory droplets, respiratory/mucosal secretions and contaminated fomites. Some of the additions are COVID-19 specific and are likely to evolve and change, particularly should serological tests determining acquired immunity become available. Other additions represent further tightening of our infection control precautions.

Facial aesthetic injections in clinical practice: Pretreatment and posttreatment consensus recommendations to minimise adverse outcomes.

Facial aesthetic treatment with injectable neuromodulators and hyaluronic acid fillers is well established, with favourable safety profiles and consistent outcomes. As with any medical treatment, adverse events and complications may occur. Adverse events associated with these products are typically transient and mild to moderate in severity. Serious adverse events, such as infection and intravascular occlusion, are rare. Proper patient selection, consent and counselling, preparation and impeccable injection technique are important risk reduction strategies. Both clinicians and patients must be alert to the signs and symptoms of complications so that appropriate treatment can be started promptly. In this article, the authors review the current literature and provide their consensus recommendations for minimising adverse outcomes when treating patients with botulinum toxin or hyaluronic acid fillers.

Understanding and treating different patient archetypes in aesthetic medicine.

BACKGROUND: Factors that motivate the treatment goals and expectations of the aesthetic patient reflect evolving social, cultural, and commercial influences. The aesthetic practitioner may often be faced with the challenge of first decoding the underlying motives that drive the patient to pursue their specific goals. The challenge for clinicians is further compounded by an increase in patient diversity with respect to race, ethnicity, age, and gender. AIMS: Simplify the path to patient interpretation with identification of primary patient archetypes. METHODS: The "Going Beyond Beauty" (GBB) initiative, consisting of 27 market research projects, was conducted to survey the primary goals and motives for seeking treatment aesthetic treatment. The results were stratified into predominant patient archetypes using segmentation analysis and then validated through online surveys, 1-to-1 interviews, and focus groups conducted with patients. An advisory board of internationally based aesthetic clinicians integrated the data with their own insights to further characterize each archetype. RESULTS: Data from over 54 000 participants in 17 different countries were distilled into four distinct patient archetypes based on motivating factors, aesthetic goals, initial treatment requests, and treatment opportunities and challenges. These archetypes were named Beautification, Positive Aging, Transformation, and Correction. CONCLUSION: The clinician's ability to recognize these four primary archetypes may provide a useful frame of reference to understand patient motives better, anticipate and manage their expectations, and provide the appropriate treatment guidance that best serves the long-term goals of their patients.