Improving distillation method and device of tritiated water analysis for ultra high decontamination efficiency.

It is important that monitoring environmental tritiated water for understanding the contamination dispersion of the nuclear facilities. Tritium is a pure beta radionuclide which is usually measured by Liquid Scintillation Counting (LSC). The average energy of tritum beta is only 5.658 keV that makes the LSC counting of tritium easily be interfered by the beta emitted by other radionuclides. Environmental tritiated water samples usually need to be decontaminated by distillation for reducing the interference. After Fukushima Nucleaer Accident, the highest gross beta concentration of groundwater samples obtained around Fukushima Daiichi Nuclear Power Station is over 1,000,000 Bq/l. There is a need for a distillation with ultra-high decontamination efficiency for environmental tritiated water analysis. This study is intended to improve the heating temperature control for better sub-boiling distillation control and modify the height of the container of the air cooling distillation device for better fractional distillation effect. The DF of Cs-137 of the distillation may reach 450,000 which is far better than the prior study. The average loss rate of the improved method and device is about 2.6% which is better than the bias value listed in the ASTM D4107-08. It is proven that the modified air cooling distillation device can provide an easy-handling, water-saving, low cost and effective way of purifying water samples for higher beta radionuclides contaminated water samples which need ultra-high decontamination treatment.

Performance comparison of electronic radon monitors.

The electronic radon monitors are noted for their convenience and acceptable accuracy. Even so, it is necessary to reassure their data quality regularly. We utilized a performance comparison system for this purpose. The instruments in our laboratories (Alphaguard, RAD7, RTM-2100 and Safety Siren) were tested via the comparison experiments. We conclude that by utilizing this system with the concept of calibration factor, it can be helpful to decide whether to send the monitors back to the original manufacturers for adjustment.