RESUMO
An in situ formed IrOx (x ≤ 2) layer driven by anodic bias serves as the essential active site of Ir-based materials for oxygen evolution reaction (OER) electrocatalysis. Once being confined to atomic thickness, such an IrOx layer possesses both a favorable ligand effect and maximized active Ir sites with a lower O-coordination number. However, limited by a poor understanding of surface reconstruction dynamics, obtaining atomic layers of IrOx remains experimentally challenging. Herein, we report an idea of material design using intermetallic IrVMn nanoparticles to induce in situ formation of an ultrathin IrOx layer (O-IrVMn/IrOx) to enable the ligand effect for achieving superior OER electrocatalysis. Theoretical calculations predict that a strong electronic interaction originating from an orderly atomic arrangement can effectively hamper the excessive leaching of transition metals, minimizing vacancies for oxygen coordination. Linear X-ray absorption near edge spectra analysis, extended X-ray absorption fine structure fitting outcomes, and X-ray photoelectron spectroscopy collectively confirm that Ir is present in lower oxidation states in O-IrVMn/IrOx due to the presence of unsaturated O-coordination. Consequently, the O-IrVMn/IrOx delivers excellent acidic OER performances with an overpotential of only 279 mV at 10 mA cm-2 and a high mass activity of 2.3 A mg-1 at 1.53 V (vs RHE), exceeding most Ir-based catalysts reported. Moreover, O-IrVMn/IrOx also showed excellent catalytic stability with only 0.05 at. % Ir dissolution under electrochemical oxidation, much lower than that of disordered D-IrVMn/IrOx (0.20 at. %). Density functional theory calculations unravel that the intensified ligand effect optimizes the adsorption energies of multiple intermediates involved in the OER and stabilizes the as-formed catalytic IrOx layer.
RESUMO
Alloying has proven power to upgrade metallic electrocatalysts, while the traditional alloys encounter limitation for optimizing electronic structures of surface metallic sites in a continuous manner. High-entropy alloys (HEAs) overcome this limitation by manageably tuning the adsorption/desorption energies of reaction intermediates. Recently, the marriage of nanotechnology and HEAs has made considerable progresses for renewable energy technologies, showing two important trends of size diminishment and multidimensionality. This review is dedicated to summarizing recent advances of HEAs that are rationally designed for energy electrocatalysis. We first explain the advantages of HEAs as electrocatalysts from three aspects: high entropy, nanometer, and multidimension. Then, several structural regulation methods are proposed to promote the electrocatalysis of HEAs, involving the thermodynamically nonequilibrium synthesis, regulating the (sub-)nanosize and anisotropic morphologies, as well as engineering the atomic ordering. The general relationship between the electronic structures and electrocatalytic properties of HEAs is further discussed. Finally, we outline remaining challenges of this field, aiming to inspire more sophisticated HEA-based nanocatalysts.
RESUMO
High-entropy alloys (HEAs) confine multifarious elements into the same lattice, leading to intense lattice distortion effect. The lattice distortion tends to induce local microstrain at atomic level and thus affect surface adsorptions toward different adsorbates in various electrocatalytic reactions, yet remains unexplored. Herein, this work reports a class of sub-2 nm IrRuRhMoW HEA nanoparticles (NPs) with distinct local microstrain induced by lattice distortion for boosting alkaline hydrogen oxidation (HOR) and evolution reactions (HER). This work demonstrates that the distortion-rich HEA catalysts with optimized electronic structure can downshift the d-band center and generate uncoordinated oxygen sites to enhance the surface oxophilicity. As a result, the IrRuRhMoW HEA NPs show a remarkable HOR kinetic current density of 8.09 mA µg-1 PGM at 50 mV versus RHE, 8.89, 22.47 times higher than those of IrRuRh NPs without internal strain and commercial Pt/C, respectively, which is the best value among all the reported non-Pt based catalysts. IrRuRhMoW HEA NPs also display great HER performances with a turnover frequency (TOF) value of 5.93 H2 s-1 at 70 mV versus RHE, 4.6-fold higher than that of Pt/C catalyst, exceeding most noble metal-based catalysts. Experimental characterizations and theoretical studies collectively confirm that weakened hydrogen (Had) and enhanced hydroxyl (OHad) adsorption are achieved by simultaneously modulating the hydrogen adsorption binding energy and surface oxophilicity originated from intensified ligand effect and microstrain effect over IrRuRhMoW HEA NPs, which guarantees the remarkable performances toward HOR/HER.
RESUMO
The volumetric density of the metal atomic site is decisive to the operating efficiency of the photosynthetic nanoreactor, yet its rational design and synthesis remain a grand challenge. Herein, we report a shell-regulating approach to enhance the volumetric density of Co atomic sites onto/into multishell ZnxCd1-xS for greatly improving CO2 photoreduction activity. We first establish a quantitative relation between the number of shell layers, specific surface areas, and volumetric density of atomic sites on multishell ZnxCd1-xS and conclude a positive relation between photosynthetic performance and the number of shell layers. The triple-shell ZnxCd1-xS-Co1 achieves the highest CO yield rate of 7629.7 µmol g-1 h-1, superior to those of the double-shell ZnxCd1-xS-Co1 (5882.2 µmol g-1 h-1) and single-shell ZnxCd1-xS-Co1 (4724.2 µmol g-1 h-1). Density functional theory calculations suggest that high-density Co atomic sites can promote the mobility of photogenerated electrons and enhance the adsorption of Co(bpy)32+ to increase CO2 activation (CO2 â CO2* â COOH* â CO* â CO) via the S-Co-bpy interaction, thereby enhancing the efficiency of photocatalytic CO2 reduction.
RESUMO
Industrializing water electrolyzers demands better electrocatalysts, especially for the anodic oxygen evolution reaction (OER). The prevailing OER catalysts are Ir or Ru-based nanomaterials, however, they still suffer from insufficient stability. An alternative yet considerably less explored approach is to upgrade Rh, a known stable but moderately active element for OER electrocatalysis, via rational structural engineering. Herein, a precise synthesis of assembled RhRuFe trimetallenes (RhRuFe TMs) with an average thickness of 1 nm for boosting overall water splitting catalysis is reported. Favorable mass transport and optimized electronic structure collectively render RhRuFe TMs with an improved OER activity of an overpotential of 330 mV to deliver 10 mA cm-2, which is significantly lower than the Rh/C control (by 601 mV) and reported Rh-based OER electrocatalysts. In particular, the RhRuFe TMs-based water splitting devices can achieve the current density of 10 mA cm-2 at a low voltage of 1.63 V, which is among the best in the Rh-based bifunctional catalysts for electrolyzers. The addition of Fe in RhRuFe TMs can modulate the strain/electron distribution of the multi-alloy, which regulates the binding energies of H* and OH* in hydrogen and oxygen evolution reactions for achieving the enhanced bifunctional OER and HER catalysis is further demonstrated.
RESUMO
Platinum metal (PtM, M=Ni, Fe, Co) alloys catalysts show high oxygen reduction reaction (ORR) activity due to their well-known strain and ligand effects. However, these PtM alloys usually suffer from a deficient ORR durability in acidic environment as the alloyed metal is prone to be dissolved due to its high electronegativity. Herein, we report a new class of PtMn alloy nanodendrite catalyst with low-electronegativity Mn-contraction for boosting the oxygen reduction durability of fuel cells. The moderate strain in PtMn, induced by Mn contraction, yields optimal oxygen reduction activity at 0.53â A mg-1 at 0.9â V versus reversible hydrogen electrode (RHE). Most importantly, we show that relative to well-known high-electronegativity Ni-based Pt alloy counterpart, the PtMn nanodendrite catalyst experiences less transition metals' dissolution in acidic solution and achieves an outstanding mass activity retention of 96 % after 10,000 degradation cycles. Density functional theory calculation reveals that PtMn alloys are thermodynamically more stable than PtNi alloys in terms of formation enthalpy and cohesive energy. The PtMn nanodendrite-based membrane electrode assembly delivers an outstanding peak power density of 1.36â W cm-2 at a low Pt loading and high-performance retention over 50â h operations at 0.6â V in H2 -O2 hydrogen fuel cells.
RESUMO
Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.
RESUMO
Ligand effect, induced by charge transfer between catalytic surface and substrate in core/shell structure, was widely proved to benefit Pt-catalyzed oxygen reduction reaction by tuning the position of d-band center of Pt theoretically. However, ligand effect is always convoluted by strain effect in real core/shell nanostructure; therefore, it remains experimentally unknown whether and how much the ligand effect solely contributes electrocatalytic activity improvements. Herein, we report precise synthesis of a kind of Pd3Ru1/Pt core/shell nanoplates with exclusive ligand effect for oxygen reduction reaction. Layer-by-layer growth of Pt overlayers onto Pd3Ru1 nanoplates can guarantee no lattice mismatch between core and shell because the well-designed Pd3Ru1 has the same lattice parameters as Pt. Electron transfer, due to the exclusive ligand effect, from Pd3Ru1 to Pt leads to a downshift of d-band center of Pt. The optimal Pd3Ru1/Pt1-2L nanoplates achieve excellent activity and stability for oxygen reduction reaction in alkaline/acid electrolyte.
RESUMO
Although dispersing Pt atomic clusters (ACs) on a conducting support is a promising way to minimize the Pt amount required in hydrogen evolution reaction (HER), the catalytic mass activity and durability of Pt ACs are often unsatisfactory for alkaline HER due to their unfavorable water dissociation and challenges in stabilizing them against agglomeration and detachment. Herein, we report a class of single-atom Cr-N4 sites with high oxophilicity interfaced with Pt ACs on mesoporous carbon for achieving a highly active and stable alkaline HER in an anion-exchange-membrane water electrolyzer (AEMWE). The as-made catalyst achieves the highest reported Pt mass activity (37.6 times higher than commercial Pt/C) and outstanding operational stability. Experimental and theoretical studies elucidate that the formation of a unique Pt-Cr quasi-covalent bonding interaction at the interface of Cr-N4 sites and Pt ACs effectively suppresses the migration and thermal vibration of Pt atoms to stabilize Pt ACs and contributes to the greatly enhanced catalytic stability. Moreover, oxophilic Cr-N4 sites adjacent to Pt ACs with favorable adsorption of hydroxyl species facilitate nearly barrierless water dissociation and thus enhance the HER activity. An AEMWE using this catalyst (with only 50 µgPt cm-2) can operate stably at an industrial-level current density of 500 mA cm-2 at 1.8 V for >100 h with a small degradation rate of 90 µV h-1.
RESUMO
Ruthenium chalcogenide is a highly promising catalytic system as a Pt alternative for hydrogen evolution reaction (HER). However, well-studied ruthenium selenide (RuSe2 ) still exhibits sluggish HER kinetics in alkaline media due to the inappropriate adsorption strength of H and H2 O. Herein, xx report a new design of Cu-doped Ru/RuSe2 heterogeneous nanosheets (NSs) with optimized H and H2 O adsorption strength for highly efficient HER catalysis in alkaline media. Theoretical calculations reveal that the superior HER performance is attributed to a synergistic effect of the unique heterointerfaced structure and Cu doping, which not only optimizes the electronic structure with a suitable d-band center to suppress proton overbinding but also alleviates the energy barrier with enhanced H2 O adsorption. As a result, Cu-doped heterogeneous Ru/RuSe2 NSs exhibit a small overpotential of 23 mV at 10 mA cm-2 , a low Tafel slope of 58.5 mV dec-1 and a high turnover frequency (TOF) value of 0.88 s-1 at 100 mV for HER in alkaline media, which is among the best catalysts in noble metal-based electrocatalysts toward HER. The present Cu-doped Ru/RuSe2 NSs interface catalyst is very stable for HER by showing no activity decay after 5000-cycle potential sweeps. This work heralds that heterogeneous interface modulation opens up a new strategy for the designing of more efficient electrocatalysts.
RESUMO
Advancing electrocatalysts for alkaline hydrogen oxidation/evolution reaction (HOR/HER) is essential for anion exchange membrane-based devices. The state-of-the-art Pt-based electrocatalysts for alkaline HOR suffer from low intrinsic activities and severe CO poisoning due to the challenge of simultaneously optimizing surface adsorption toward different adsorbates. Herein, this challenge is overcome by tuning an atomic MoOx layer with high oxophilicity onto PtMo nanoparticles (NPs) with optimized Had , OHad , and COad adsorption for boosting anti-CO-poisoning hydrogen-cycle electrocatalysis in alkaline media. For alkaline HOR, this catalyst exhibits high kinetics and an exchange current density of 3.19 mA µgPt -1 at 50 mV versus reversible hydrogen electrode and 0.83 mA cmPt -2 , 10.3- and 3.8-fold higher than those of commercial Pt/C, respectively. For alkaline HER, it achieves an unprecedented overpotential of 37 mV at 10 mA cm-2 . Experimental and theoretical studies show that the orchestrated electronic and oxophilic regulation of the PtMo/MoOx interface NPs simultaneously optimizes Had and OHad adsorption for boosting alkaline hydrogen electrocatalysis, whereas reactive oxygen from the amorphous MoOx atomic layer lowers the CO oxidation reaction barrier, leading to superior anti-poisoning ability even at 100 ppm CO.
RESUMO
STUDY OBJECTIVE: Any abnormality of the uterine cavity can result in reduced endometrial receptivity, which negatively affects embryo implantation and leads to lower clinical pregnancy rates. The effects of improved uterine cavity environment on in vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI)-embryo transfer (ET) treatment outcome are unclear. This study aimed to investigate the impact of improved uterine cavity abnormalities on the pregnancy outcomes of infertile patients undergoing IVF/ICSI-ET. DESIGN: Retrospective study. SETTING: Single-center. PATIENTS: Women with infertility who underwent fresh cycles of IVF/ICSI-ET. INTERVENTIONS: We retrospectively analyzed the clinical data of 31 057 cycles of women with infertility undergoing IVF/ICSI-ET with hysteroscopy and treated at the First Affiliated Hospital of Zhengzhou University Reproductive Medicine Center from August 2009 to May 2018. According to the previous condition of their uterine cavity, patients were divided into the normal uterine cavity, single uterine cavity abnormality, and complex uterine cavity abnormality groups. Differences in general conditions and pregnancy-assisted outcomes were compared among the groups, which were screened according to propensity score matching. MEASUREMENTS AND MAIN RESULTS: In 3005 cycles after propensity score matching screening, there were no statistically significant differences in the implantation and clinical pregnancy rates of patients with successfully treated uterine cavity abnormalities and lesions (p > .05). The miscarriage rate was significantly higher in the complex uterine cavity abnormality group than in the normal (p = .001) and single uterine cavity abnormality groups (p = .002). Logistic regression analysis showed that the female partner's age (adjusted odds ratio, 1.12; 95% confidence interval, 1.05-1.19; p = .001) and history of intrauterine adhesions (adjusted odds ratio, 1.44; 95% confidence interval, 1.12-1.85; p = .005) were independent risk factors for miscarriage. CONCLUSION: The age of the female partner and history of intrauterine adhesions increased the miscarriage rate in patients undergoing IVF/ICSI-ET.
Assuntos
Aborto Espontâneo , Infertilidade , Aborto Espontâneo/epidemiologia , Aborto Espontâneo/etiologia , Feminino , Fertilização in vitro , Humanos , Infertilidade/etiologia , Masculino , Gravidez , Taxa de Gravidez , Estudos Retrospectivos , Sêmen , Injeções de Esperma Intracitoplásmicas , Anormalidades Urogenitais/complicações , Útero/anormalidadesRESUMO
Moderate adsorption of oxygenated intermediates takes a significant role in rational design of high-efficiency oxygen reduction reaction (ORR) electrocatalysts. Long-serving as a reliable strategy to tune geometric structure of nanomaterials, defect engineering enjoys the great ability of adjusting the coordination environment of catalytic active sites, which enables dominant regulation of adsorption energy and kinetics of ORR catalysis. However, limited to controllable nanocrystals fabrication, inducing uniformly dispersed high-coordinated defects into ultrathin 2D nanosheets remains challenging. Herein, atomic-scale cavities (ASCs) are proposed as a new kind of high-coordinated active site and successfully introduced into suprathin Pd (111)-exposed metallene. Due to its atomic concave architecture, leading to elevated CN and moderately downshifted d-band center, the as-made Pd metallene with ASCs (c-Pd M) exhibits excellent ORR performance with mass activity of 2.76 A mgPd -1 at 0.9 V versus reversible hydrogen electrode (RHE) and half-wave potential as high as 0.947 V, which is 18.9 (2.7) times higher and 104 (46) mV larger than that of commercial Pt/C (Pd metallene without ASCs). Besides, the durability of c-Pd M exceeds its commercial counterpart with ≈30% loss after 5000 cycles. This work highlights a new-style mentality of designing fancy active sites toward efficient ORR electrocatalysis.
RESUMO
Atomically dispersed metal catalysts with well-defined structures have been the research hotspot in heterogeneous catalysis because of their high atomic utilization efficiency, outstanding activity, and selectivity. Dual-atomic-site catalysts (DASCs), as an extension of single-atom catalysts (SACs), have recently drawn surging attention. The DASCs possess higher metal loading, more sophisticated and flexible active sites, offering more chance for achieving better catalytic performance, compared with SACs. In this review, recent advances on how to design new DASCs for enhancing energy catalysis will be highlighted. It will start with the classification of marriage of two kinds of single-atom active sites, homonuclear DASCs and heteronuclear DASCs according to the configuration of active sites. Then, the state-of-the-art characterization techniques for DASCs will be discussed. Different synthetic methods and catalytic applications of the DASCs in various reactions, including oxygen reduction reaction, carbon dioxide reduction reaction, carbon monoxide oxidation reaction, and others will be followed. Finally, the major challenges and perspectives of DASCs will be provided.