RESUMO
Metal-organic framework (MOF) derivatives with tunable pore structure and improved conductivity are intensively designed as electroactive materials. Incorporating structure directing agents (SDA) is beneficial for designing MOF derivatives with excellent electrochemical performances. Ammonium fluoroborate has been reported as an effective SDA, coupled with cobalt salt and 2-methylimidazole, to synthesize zeolitic imidazolate framework-67 (ZIF-67) derivatives for charge storage. However, the synthetic environment for growing cobalt-based active materials is relatively complex. In this study, cobalt tetrafluoroborate (Co(BF4)2) is proposed as a novel cobalt precursor, supplementing cobalt ions and acting as the SDA in a single chemical, to synthesize the cobalt-based electroactive material of energy storage electrodes. Interactions between solvent molecules and solutes play significant roles on the morphology, composition, and electrochemical performance of active materials. Deionized water, methanol and ethanol are used as precursor solvents to understand their effects on material and electrochemical properties. The optimal electrode presents a specific capacitance of 608.3 F/g at 20 mV/s, attributed to the highest electrochemical surface area and evident compositions of cobalt fluoride and hydroxide. A battery supercapacitor hybrid achieves the maximum energy density of 45 Wh/kg at 429 W/kg. The CF retention of 100% and Coulombic efficiency of 99% are achieved after 10,000 cycles.
RESUMO
Sodium-ion battery (SIB) is one of potential alternatives to lithium-ion battery, because of abundant resources and lower price of sodium. High electrical conductivity and long-term durability of MXene are advantageous as the anode material of SIB, but low energy density restricts applications. Tin phosphide possesses high theoretical capacity, low redox potential, and large energy density, but volume expansion reduces its cycling stability. In this study, tin phosphide particles are in-situ encapsulated into MXene conductive networks (SnxPy/MXene) by hydrothermal and phosphorization processes as novel anode materials of SIB. MXene amounts and hydrothermal durations are investigated to evenly distribute SnxPy in MXene. After 100 cycles, SnxPy/MXene reaches high specific capacities of 438.8 and 314.1 mAh/g at 0.2 and 1.0 A/g, respectively. The capacity retentions of 6.0% and 73.6% at 0.2 A/g are respectively obtained by SnxPy and SnxPy/MXene. The better specific capacity and cycling stability of SnxPy/MXene are attributed to less volume expansion of SnxPy during charge/discharge processes and relieved self-stacking of MXene by encapsulating SnxPy particles between MXene layers. Electrochemical impedance spectroscopy and Galvanostatic intermittent titration technique are also applied to analyze the charge storage mechanism in SIB. Higher sodium ion diffusion coefficient and smaller charge-transfer resistance are obtained by SnxPy/MXene.
RESUMO
This work presents a hydrothermal method followed by a sonochemical treatment for synthesizing tantalum decorated on iron selenide (Ta/FeSe2) integrated with nitrogen-doped graphene (NGR) as a susceptible electrode material for detecting trolox (TRX) in berries samples. The surface morphology, structural characterizations, and electrochemical performances of the synthesized Ta/FeSe2/NGR composite were analyzed via spectrophotometric and voltammetry techniques. The GCE modified with Ta/FeSe2/NGR demonstrated an impressive linear range of 0.1 to 580.3 µM for TRX detection. Additionally, it achieved a remarkable limit of detection (LOD) of 0.059 µM, and it shows a high sensitivity of 2.266 µA µÐ-1 cm-2. Here, we used density functional theory (DFT) to investigate the structures of TRX and TRX quinone and the locations of energy levels and electron transfer sites. The developed sensor exhibits significant selectivity, satisfactory cyclic and storage stability, and notable reproducibility. Moreover, the practicality of TRX was assessed in different types of berries, yielding satisfactory recoveries.
Assuntos
Cromanos , Frutas , Grafite , Nitrogênio , Tantálio , Grafite/química , Frutas/química , Nitrogênio/química , Tantálio/química , Cromanos/química , Cromanos/análise , Teoria da Densidade Funcional , Técnicas Eletroquímicas , Limite de Detecção , Eletrodos , Ferro/química , Ferro/análiseRESUMO
This study involved the synthesis of a Ce2Sn2O7/Ag3PO4/V@g-C3N4 composite through hydrothermal methods, followed by mechanical grinding. The resulting heterojunction exhibited improved catalytic activity under visible light by effectively separating electrons and holes (e-/h+). The degradation of Tartrazine (TTZ) reached 93.20% within 50 min by employing a ternary composite at a concentration of 10 mg L-1, along with 6 mg L-1 of PS. The highest pseudo-first-order kinetic constant (0.1273 min-1 and R2 = 0.951) was observed in this system. The dual Z-scheme heterojunction is developed by Ce2Sn2O7, Ag3PO4, and V@g-C3N4, and it may increase the visible light absorption range while also accelerating charge carrier transfer and separation between catalysts. The analysis of the vulnerability positions and degradation pathways of TTZ involved the utilization of density functional theory (DFT) and gas chromatography-mass spectrometry (GC-MS) to examine the intermediate products. Therefore, Ce2Sn2O7/Ag3PO4/V@g-C3N4 is an excellent ternary nanocomposite for the remediation of pollutants.
Assuntos
Compostos de Prata , Tartrazina , Cinética , Catálise , Compostos de Prata/química , Tartrazina/química , Sulfatos/química , Aditivos Alimentares/química , Teoria da Densidade Funcional , Cério/química , Compostos de Nitrogênio/química , Grafite , FosfatosRESUMO
Pesticides pollute natural water reservoirs through persistent accumulation. Therefore, their toxicity and degradability are serious issues. Carbendazim (CBZ) is a pesticide used against fungal infections in agricultural crops, and its overexploitation detrimentally affects aquatic ecosystems and organisms. It is necessary to design a logical, efficient, and field-deployable method for monitoring the amount of CBZ in environmental samples. Herein, a nano-engineered bismuth selenide (Bi2Se3)/functionalized carbon nanofiber (f-CNF) nanocomposite was utilized as an electrocatalyst to fabricate an electrochemical sensing platform for CBZ. Bi2Se3/f-CNF exhibited a substantial electroactive surface area, high electrocatalytic activity, and high conductivity owing to the synergistic interaction of Bi2Se3 with f-CNF. The structural chemical compositions and morphology of the Bi2Se3/f-CNF nanocomposite were confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscopy (FESEM). Electrochemical analysis was carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The voltammetry and impedance experiments exposed that the Bi2Se3/f-CNF-modified GCE has attained adequate electrocatalytic function with amended features of electron transportation (Rct = 35.93 Ω) and improved reaction sites (0.082 cm2) accessible by CBZ moiety along with exemplary electrochemical stability (98.92%). The Bi2Se3/f-CNF nanocomposite exhibited higher sensitivity of 0.2974 µA µM-1cm-2 and a remarkably low limit of detection (LOD) of 1.04 nM at a broad linera range 0.001-100 µM. The practicability of the nanocomposite was tested in environmental (tap and pond water) samples, which supports excellent signal amplification with satisfactory recoveries. Hence, the Bi2Se3/f-CNF nanocomposite is a promising electrode modifier for detecting CBZ.
Assuntos
Benzimidazóis , Bismuto , Carbamatos , Carbono , Nanofibras , Compostos de Selênio , Carbono/química , Nanofibras/química , Ecossistema , Água , Técnicas Eletroquímicas/métodos , EletrodosRESUMO
Tailoring morphology and composition of metal organic frameworks (MOF) can improve energy storage by establishing high surface area, large porosity and multiple redox states. Structure directing agents (SDA) is functional of designing surface properties of electroactive materials. Ammonium fluoride has functional abilities for designing MOF derivatives with excellent energy storage abilities. Systematic design of MOF derivatives using ammonia fluoride-based complex as SDA can essentially create efficient electroactive materials. Metal species can also play significant roles on redox reactions, which are the main energy storage mechanism for battery-type electrodes. In this work, 2-methylimidazole, two novel SDAs of NH4BF4 and NH4HF2, and six metal species of Al, Mn, Co, Ni, Cu and Zn are coupled to synthesize MOF derivatives for energy storage. Metal species-dependent compositions including hydroxides, oxides, and hydroxide nitrates are observed. The nickel-based derivative (Ni-HBF) shows the highest specific capacitance (CF) of 698.0F/g at 20 mV/s, due to multiple redox states and advanced flower-like surface properties. The diffusion and capacitive-control contributions of MOF derivatives are also analyzed. The battery supercapacitor hybrid with Ni-HBF electrode shows a maximum energy density of 27.9 Wh/kg at 325 W/kg. The CF retention of 170.9% and Coulombic efficiency of 93.2% are achieved after 10,000 cycles.
RESUMO
The current study reports the design and construction of enzyme-free sensor using N-doped graphene quantum dots (N-GQDs)-decorated tin sulfide nanosheets (SnS2) for in situ monitoring of H2O2 secreted by human breast cancer cells. N-GQDs nanoparticles having a size of less than 1 nm were incorporated into SnS2 nanosheets to form an N-GQDs@SnS2 nanocomposite using a simple hydrothermal approach. The resulting hybrid material was an excellent electrocatalyst for the reduction of H2O2, owing to the combined properties of highly conductive N-GQDs and SnS2 nanosheets. The N-GQDs@SnS2-based sensing platform demonstrated substantial sensing ability, with a detection range of 0.0125-1128 µM and a limit of detection of 0.009 µM (S/N = 3). The sensing performance of N-GQDs@SnS2 was highly stable, selective, and reproducible. The practical application of the N-GQDs@SnS2 sensor was successfully demonstrated by quantifying H2O2 in lens cleaner, human urine, and saliva samples. Finally, the N-GQDs@SnS2 electrode was successfully applied for the real-time monitoring of H2O2 released from breast cancer cells and mouse fibroblasts. This study paves the way to designing efficient non-enzymatic electrochemical sensors for various biomolecule detection using a simple method.
Assuntos
Neoplasias da Mama , Grafite , Pontos Quânticos , Animais , Camundongos , Humanos , Feminino , Grafite/química , Pontos Quânticos/química , Peróxido de Hidrogênio , EletrodosRESUMO
The zeolitic imidazolate framework 67 (ZIF67) derivative is a potential active material of supercapacitors (SC), owing to high specific surface area and porosity and possible formation of cobalt compounds. A novel ZIF67 derivative is synthesized using a one-step solution process with cobalt precursor 2-methylimidazole (2-Melm) and ammonia fluoride in our previous work. Due to its facile synthesis and excellent electrocapacitive behavior, it is crucial to understand the competition between ammonia fluoride and 2-Melm on forming derivatives with cobalt ions and to create more efficient ZIF67 derivatives for charge storage. In this work, several ZIF67 derivatives are designed using a one-step solution process with 2-Melm and ammonia fluoride incorporated in different sequences. The reaction durations for a single ligand and two ligands are controlled. The largest capacity of 176.33 mAh/g corresponding to the specific capacitance of 1057.99 F/g is achieved for the ZIF67 derivative electrode prepared by reacting ammonia fluoride and a cobalt precursor for 0.5 h and then incorporating 2-Melm for another 23.5 h of reaction (NM0.5). This derivative composed of highly conductive CoF2, NiF2, Co(OH)F, and Ni(OH)F presents high specific surface area and porosity. The relevant SC presents a maximum energy density of 19.5 Wh/kg at 430 W/kg, a capacity retention of 92%, and Coulombic efficiency of 96% in 10000 cycles.
RESUMO
Rapid, accurate, and sensitive insulin detection is crucial for managing and treating diabetes. A simple sandwich-type electrochemical immunosensor is engineered using gold nanoparticle (AuNP)-adhered metal-organic framework-derived copper-zinc hollow porous carbon nanocubes (Au@Cu5 Zn8 /HPCNC) and AuNP-deposited nitrogen-doped holey graphene (NHG) are used as a dual functional label and sensing platform. The results show that identical morphology and size of Au@Cu5 Zn8 /HPCNC enhance the electrocatalytic active sites, conductivity, and surface area to immobilize the detection antibodies (Ab2 ). In addition, AuNP/NHG has the requisite biocompatibility and electrical conductivity, which facilitates electron transport and increases the surface area of the capture antibody (Ab1 ). Significantly, Cu5 Zn8 /HPCNC exhibits necessary catalytic activity and sensitivity for the electrochemical reduction of H2 O2 using (i-t) amperometry and improves the electrochemical response in differential pulse voltammetry. Under optimal conditions, the immunosensor for insulin demonstrates a wide linear range with a low detection limit and viable specificity, stability, and reproducibility. The platform's practicality is evaluated by detecting insulin in human serum samples. All these characteristics indicate that the Cu5 Zn8 /HPCNC-based biosensing strategy may be used for the point-of-care assay of diverse biomarkers.
Assuntos
Técnicas Biossensoriais , Grafite , Nanopartículas Metálicas , Anticorpos Imobilizados/química , Carbono , Técnicas Eletroquímicas/métodos , Ouro/química , Grafite/química , Humanos , Imunoensaio/métodos , Insulina , Limite de Detecção , Nanopartículas Metálicas/química , Nitrogênio , Porosidade , Reprodutibilidade dos Testes , ZincoRESUMO
Nickel and cobalt layered double hydroxide (NiCo-LDH) has large specific surface area and interlayer spacing, multiple redox states and high ion-exchange capability, but poor electrical conductivity, severe agglomerations and structural defect restrict energy storage ability of NiCo-LDH as active materiel of battery supercapacitor hybrids (BSH). In this study, it is the first time to design sulfur-doped NiCo-LDH and polypyrrole nanotubes composites (NiCo-LDH-S/PNTs) from zeolitic imidazolate framework-67 (ZIF-67) as the efficient active material of BSH using electrospinning and hydrothermal processes. Effects of sulfur doping amounts are investigated. The one-dimensional hollow polypyrrole decorated with NiCo-LDH-S sheets with high aspect ratio provides straight charge-transfer routes and abundant contacts with electrolyte. The highest specific capacitance (CF) of 1936.3 F/g (specific capacity of 322.8 mAh/g) is achieved for the NiCo-LDH-S/PNTs with sulfur doping amount of 7% at 10 mV/s. The BSH comprising graphene LDH negative electrode and NiCo-LDH-S/PNTs positive electrode shows the maximum energy density of 16.28 Wh/kg at 650 W/kg. The CF retention of 74% and Coulombic efficiency of 90% are also achieved after 8000 charge/discharge cycles.
RESUMO
Doping heteroatoms and decorating co-catalyst are intensively applied to improve photocatalytic ability of BiVO4. In this study, it is the first time to design W-doped BiVO4 coupling MIL-101(Fe) as photocatalyst for water oxidation using electrodeposition and hydrothermal processes. Similar system with Mo as dopant has been reported, but the dopant plays important roles on electrochemical performance. It is worthy to study the efficient system with different dopant. Doping amount of W is optimized to achieve high carrier density without creating serious recombination sites. MIL-101(Fe) is decorated on W-doped BiVO4 to suppress surface recombination, create accessible active sites and improve water oxidation kinetics. Optimized W-doped BiVO4/MIL-101(Fe) electrode shows a high photocurrent density of 4.00 mA/cm2 at 1.23 V versus reversible hydrogen electrode (VRHE) under air mass 1.5-global simulated light illumination without hole scavenger in electrolyte, due to large electrochemical surface area, high carrier density and small charge-transfer resistance. The W-doped BiVO4 and BiVO4 electrodes merely show photocurrent densities of 2.96 and 1.72 mA/cm2 at 1.23 VRHE, respectively. Photocurrent retention higher than 95.5% is obtained for W-doped BiVO4/MIL-101 (Fe) electrode under continuous illumination for 6300 s, suggesting lasting photocatalytic ability of this novel W-doped BiVO4/MIL-101(Fe) electrode.
RESUMO
Insulin, which is a hormone produced by the ß-cells of the pancreas, regulates the glucose levels in the blood and can transport glucose into cells to produce glycogen or triglycerides. Insulin deficiency can lead to hyperglycemia and diabetes. Therefore, insulin detection is critical in clinical diagnosis. In this study, disposable Au electrodes were modified with copper(II) benzene-1,3,5-tricarboxylate (Cu-BTC)/leaf-like zeolitic imidazolate framework (ZIF-L) for insulin detection. The aptamers are easily immobilized on the Cu-BTC/ZIF-L composite by physical adsorption and facilitated the specific interaction between aptamers and insulin. The Cu-BTC/ZIF-L composite-based aptasensor presented a wide linear insulin detection range (0.1 pM to 5 µM) and a low limit of detection of 0.027 pM. In addition, the aptasensor displayed high specificity, good reproducibility and stability, and favorable practicability in human serum samples. For the in vivo tests, Cu-BTC/ZIF-L composite-modified electrodes were implanted in non-diabetic and diabetic mice, and insulin was quantified using electrochemical and enzyme-linked immunosorbent assay methods.
Assuntos
Diabetes Mellitus Experimental , Estruturas Metalorgânicas , Nanofios , Zeolitas , Animais , Glucose , Insulina , Camundongos , Reprodutibilidade dos TestesRESUMO
High surface area and tunable pore size are beneficial for metal organic frameworks (MOFs) as electroactive material of energy storage devices. Novel ZIF67 derivative proposed in our previous work, nickel cobalt fluoride coupled with ammonia ions (NCNF), is synthesized using ammonia fluoride to solve poor electrical conductivity of MOFs. MXene is commonly incorporated in pseudo-capacitive materials to enhance electrical conductivity and energy storage ability. In this study, it is the first time to design MXene and NCNF composites (MXene/NCNF) with different MXene amounts via incorporating MXene in growing process of NCNF. MXene and NCNF are combined via self-assembly in a simple room temperature solution process. The optimized MXene/NCNF electrode shows a higher specific capacitance of 1020.0 F g-1 (170.0 mAh g-1) than that of NCNF electrode (574.2 F g-1 and 95.7 mAh g-1) at 20 mV s-1, due to excellent surface properties of MXene/NCNF with conductive network of MXene and high electrocapacitive performance of NCNF. A symmetric energy storage device composed of the optimized MXene/NCNF electrodes presents outstanding cycling stability with Coulombic efficiency of 100% during whole cycling process and a high capacitance retention of 99% after 6000 cycles. Excellent electrochemical performance and simple synthesis of MXene/NCNF open new blueprints for designing novel electrocapacitive materials for electrochemical applications.
RESUMO
Prolactin (PRL) is produced by the pituitary gland and plays a vital role in the production of milk after a baby is born. PRL levels are normally elevated in pregnant and nursing women, and high levels of PRL in the human body cause hyperprolactinemia, infertility, galactorrhea, infrequent or irregular periods, amenorrhea, breast pain, and loss of libido. Accordingly, herein, a novel label-free immunosensor using a bismuth sulfide/polypyrrole (Bi2S3/PPy)-modified screen-printed electrode (SPE) for the fast and facile detection of the peptide hormone PRL. Bi2S3 nanorods were synthesized via a facile hydrothermal technique, and PPy was prepared by chemical polymerization method. Subsequently, the Bi2S3/PPy/ SPE was modified with 3-mercaptopropionic acid (MPA) and EDC/NHS. Owing to the cross-linking effect of EDC/NHS, antibody-PRL (anti-PRL) was firmly stabilized on the modified SPE surface. These layer-by-layer modifications enhanced the conducting properties, anti-PRL loading capacity, and sensitivity of the developed immunosensor. Under optimized conditions, the PRL immunosensor demonstrated a broad linear range of approximately 1-250 ng/mL, a low detection limit of approximately 0.130 ng/mL (3 × SD/b), good specificity, reproducibility, and stability. PRL was successfully evaluated in human and mouse serum samples, and the corresponding outcomes were compared with those of the electrochemical and ELISA methods.
Assuntos
PolímerosRESUMO
Zeolitic imidazolate framework-67 (ZIF67) derivatives are considered as promising active materials for energy storage owing to the possible formation of cobalt oxide and N-doped graphite. Cobalt oxide has multiple redox states for generating redox reactions for charge storage, while N-doped graphite can provide high electrical conductivity for charge transfer. In this study, it is the first time to synthesize binder-free electrodes composed of cobalt oxide and N-doped graphite derived from ZIF67 on carbon cloth (CC) for supercapacitor (SC). Successive oxidation and carbonization along with additional coverage of ZIF67 derivatives are applied to synthesize ZIF67 derivatives composed of cobalt oxide, N-doped graphite and cobalt oxide/N-doped graphite composites with different layer compositions. The highest specific capacitance (CF) of 90.0F/g at 20 mV/s is obtained for the oxidized ZIF67/carbonized ZIF67/carbon cloth (O67/C67/CC) electrode, due to the large surface area and high electrical conductivity benefitted from preferable morphology and growing sequence of Co3O4 and N-doped graphite. The symmetric SC composed of O67/C67/CC electrodes shows the maximum energy density of 2.53 Wh/kg at the power density of 50 W/kg. Cycling stability with CF retention of 70% and Coulombic efficiency of 65% after 6000 times repeatedly charge/discharge process is also obtained for this symmetric SC.
RESUMO
Lithium iron phosphate (LFP) is one of the promising cathode materials of lithium ion battery (LIB), but poor electrical conductivity restricts its electrochemical performance. Carbon coating can improve electrical conductivity of LFP without changing its intrinsic property. Uniform coating of carbon on LFP is significant to avoid charge congregation and unpreferable redox reactions. It is the first time to apply the commercial organic binder, Super P® (SP), as carbon source to achieve uniform coating on LFP as cathode material of LIB. The simple and economical mechanofusion method is firstly applied to coat different amounts of SP on LFP. The LIB with the cathode material of optimized SP-coated LFP shows the highest capacity of 165.6 mAh/g at 0.1C and 59.8 mAh/g at 10C, indicating its high capacity and excellent high-rate charge/discharge capability. SP is applied on other commercial LFP materials, M121 and M23, for carbon coating. Enhanced high-rate charge/discharge capabilities are also achieved for LIB with SP-coated M121 and M23 as cathode materials. This new material and technique for carbon coating is verified to be applicable on different LFP materials. This novel carbon coating method is expected to apply on other cathode materials of LIB with outstanding electrochemical performances.
RESUMO
Zeolitic imidazolate framework-67 (ZIF67) has been regarded as an effective energy storage material due to its high surface area and electroactive cobalt center. Carbonizing ZIF67 can enhance electrical conductivity by converting 2-methylimidazole (2-melm) to carbon with cobalt doping. In this work, a novel in situ electrospinning is proposed to fabricate carbonized ZIF67 on carbon fiber (C67@PAN-OC) as a freestanding supercapacitor electrode. Polyacrylonitrile solution containing a cobalt precursor is used for electrospinning, and produced fibers are immersed in 2-melm to form ZIF67. Individually grown carbonized ZIF67 on carbon fiber is obtained using the in situ electrospinning method, while the one-body mixed carbon electrode is formed using the ex situ electrospinning method. A highest specific capacitance (CF) of 386.3 F/g at 20 mV/s is obtained for the in situ synthesized C67@PAN-OC electrode due to the largest electrochemical surface area and the smallest resistance, while the ex situ synthesized electrode only shows a CF value of 27.7 F/g. A symmetric supercapacitor (SSC) assembled using the optimized C67@PAN-OC electrodes and gel electrolytes shows a maximum energy density of 9.64 kWh/kg at 0.55 kW/kg and a CF retention of 59.5% after 1000 times charge/discharge process. A CF retention of 75.6% after bending 100 times is also obtained for SSC.
RESUMO
Matrix metalloproteinase-1 (MMP-1) is associated with many types of cancers, including oral, colorectal, and brain cancers. This paper describes the fabrication of an MMP-1 immunosensor based on a gold nanoparticle/polyethyleneimine/reduced graphene oxide (AuNP/PEI/rGO)-modified disposable screen-printed electrode (SPE). A microwave-assisted single-step method was employed for the simultaneous reduction of gold and graphene oxide in a PEI environment to avoid AuNP agglomeration. The crystal structure, chemical composition, optical properties, and interior morphology of the materials were probed by X-ray diffraction, Raman spectroscopy, UV-visible spectrometry, and transmission electron microscopy techniques. To assemble a label-free MMP-1 immunosensor layer-by-layer, 3-mercaptopropionic acid was utilized due to its strong sulfur-gold bonding ability, and its tail end was attached to a carboxyl group, allowing the MMP-1 antibody (anti-MMP-1) to be subsequently cross-linked using the traditional N-(3-dimethylaminopropyl) and N' ethylcarbodiimide hydrochloride method. Differential pulse voltammetry analysis showed a linear relationship with MMP-1 concentration in the range of 1-50 ng ml-1 with an R2 value of â¼0.996 (n = 5, RSD < 5%). This immunosensor was successfully applied for MMP-1 detection in urine, saliva, bovine serum, and cell culture media (HSC-3 & C6) of oral and brain cancers showing results comparable to those of the credible ELISA method.
Assuntos
Técnicas Biossensoriais , Grafite , Nanopartículas Metálicas , Nanocompostos , Neoplasias , Animais , Biomarcadores Tumorais , Bovinos , Técnicas Eletroquímicas , Eletrodos , Ouro , Imunoensaio , Limite de Detecção , Metaloproteinase 1 da Matriz , PolietilenoiminaRESUMO
Hematite (α-Fe2 O3 ) is one of the promising photocatalysts for water oxidation, owing to its stable, abundant and visible-light responsive features. Enhancing electrical conductivity and accelerating oxidation evolution kinetics are expected to improve photocatalytic ability of hematite toward water oxidation. In this work, strategies of doping heteroatoms and developing pn homojunction are adopted to enhance the photocatalytic ability of hematite electrodes. The Ti and Mg dopants are separately incorporated in two layers of hematite electrodes via two-step hydrothermal reaction and one-step annealing process. The effect of regrowth time for synthesizing Mg-doped hematite on the photoelectrochemical performance of Mg-doped and Ti-doped hematite (Mg-Fe2 O3 /Ti-Fe2 O3 ) electrode is studied. The size of rod-like structure and gaps in-between play important roles on the photocatalytic ability of Mg-Fe2 O3 /Ti-Fe2 O3 . The optimized Mg-Fe2 O3 /Ti-Fe2 O3 electrode is prepared by using merely 10â min for synthesizing the Mg-doped hematite top layer, which shows the highest photocurrent density of 2.83â mA/cm2 at 1.60â VRHE along with the highest carrier density of 5.89×1016 â cm-3 and the smallest charge-transfer resistance. This largely improved photoelectrochemical performance is attributed to the more donor generation with heteroatom-doping and more efficient charge cascade with homojunction establishment. Other p-type metals are encouraged to dope in hematite as the second layer to couple with the n-type Ti-doped hematite for developing efficient pn homojunction and improve the photocatalytic ability of hematite in the near future.
RESUMO
Flexible supercapacitors (SCs) always face the charging issue when they are used in some special situations (e.g., wilderness island) that cannot provide electricity, which would limit the continuous energy supply for the attached wearable electronics. Herein, a self-chargeable flexible solid-state supercapacitor (FSSSC) was creatively constructed by sandwiching a piezoelectric polyvinyl alcohol/potassium hydroxide/barium titanate electrolyte between symmetric NiCo2O4@activated carbon cloth electrodes. By virtue of the efficient synergy of each component in the FSSSC, the device exhibits integrated merits with excellent flexibility, satisfactory electrochemical properties, and considerable self-charging capability through synchronously collecting and converting mechanical energy (e.g., repeated bending) into storable electrochemical energy in a persistent way. When the devices are serially connected and self-charged, they can be used to drive typical electronics with normal working. Such a unique material and device design enables the FSSSC with combined capabilities such as energy-harvesting and conversion and storage device for self-powered wearable electronics.