Comprehensive assessment of combined inorganic and organic fertilization strategies on cotton cultivation: implications for sustainable agriculture.

BACKGROUND: The integration of inorganic and organic fertilizers is increasingly being recommended to address the demand for sustainable cotton cultivation and to mitigate the ecological impacts of reliance on inorganic fertilizers. However, the nuanced effects of this combined fertilization approach on soil quality, cotton growth, yield, and their interaction mechanisms, remain unclear. METHOD: To elucidate this, a 2-year field trial (2022-2023) was conducted, incorporating five fertilization treatments: low inorganic fertilizer (BI1), high inorganic fertilizer (BI2), organic fertilizer (BO), combined low inorganic and organic fertilizer (BIO1), and combined high inorganic and organic fertilizer (BIO2). This study aimed to evaluate the influence of these treatments on soil quality, cotton growth, and yield. RESULTS: The results indicate that the BO treatment significantly enhanced plant height growth rate, and BIO1 treatment increased leaf area index and dry matter accumulation growth rate. Critical soil parameters such as alkali-hydrolyzed nitrogen and available potassium emerged as pivotal determinants of soil quality over the trial period, corresponding to soil quality index (SQI) values of 0.482 and 0.478, and yields of 7506.19 kg ha-1 and 6788.02 kg ha-1, respectively. Water productivity reached optimum levels at SQI values of 0.461 and 0.462, with corresponding efficiencies of 13.31 kg (ha mm)-1 and 12.16 kg (ha mm)-1. Partial least squares path modeling revealed that integrating organic fertilizer with reduced inorganic fertilizer usage significantly boosts cotton yield by enhancing soil quality (path coefficient: 0.842). CONCLUSION: In conclusion, this integrated fertilization strategy not only improves soil health but also increases agricultural productivity. It presents a promising approach for optimizing crop yields while fostering sustainable agricultural practices. © 2024 Society of Chemical Industry.

The mechanism of using magnetized-ionized water in combination with organic fertilizer to enhance soil health and cotton yield.

Addressing critical challenges in sustainable agriculture, notably water scarcity and soil degradation, necessitates innovative irrigation and fertilization methods. This investigation thoroughly assessed the effects of combining inorganic and organic fertilizers under brackish water irrigation, particularly focusing on magnetized-ionized brackish water-a promising solution for these challenges. The study shows that the integration of inorganic and organic fertilizers notably enhances soil water retention and salt leaching when applied with magnetized-ionized brackish water irrigation (MIBIO treatment), with water storage rate and salt accumulation rate observed at -0.454 and -0.075, respectively. Additionally, soil microbial diversity and uniformity witnessed significant improvement, positively influencing cotton growth rates, particularly noting a dry matter accumulation rate of 9.3262 kg·(ha·°C)-1. Transcriptomic analysis revealed that the MIBIO treatment elevated gene expression during the boll period, with notable enrichment in pathways such as the MAPK signaling pathway-plant and amino sugar and nucleotide sugar metabolism. Furthermore, the partial least squares path modeling indicated that soil alkali-hydrolyzed nitrogen (AN) and available potassium (AK) positively impact cotton leaf transcription and yield, with path coefficients of 0.613 and 0.428, respectively. Specifically, AN and AK contribute to enhancing cotton growth and affect the expression of metabolism genes in cotton leaves, thereby increasing cotton yield. Our study highlights the crucial role of irrigation and fertilization in influencing the soil environment and cotton growth. We recommend the use of magnetized-ionized water irrigation in combination with organic fertilizers as a strategy to boost agricultural productivity. Through the development of these strategies, our goal is to offer farmers practical guidance that can be readily implemented to enhance crop production efficiency, reduce environmental impact, and adhere to the principles of sustainable agriculture.

Effects of Organic Fertilizer on Photosynthesis, Yield, and Quality of Pakchoi under Different Irrigation Conditions.

Water scarcity and the overuse of chemical fertilizers present significant challenges to modern agriculture, critically affecting crop photosynthesis, yield, quality, and productivity sustainability. This research assesses the impact of organic fertilizer on the photosynthetic attributes, yield, and quality of pakchoi under varying irrigation water conditions, including fresh water and brackish water. Findings reveal that the modified rectangular hyperbolic model most accurately captures the photosynthetic reaction to organic fertilization, outperforming other evaluated models. The maximum net photosynthesis rate (Pnmax), yield, soluble sugar (SS), and soluble protein content (SP) all exhibited a downward-opening quadratic parabolic trend with increasing amounts of organic fertilizer application. Specifically, under fresh-water irrigation, the optimal Pnmax, yield, SS, and SP were obtained at organic fertilizer rates of 65.77, 74.63, 45.33, and 40.79 kg/ha, respectively, achieving peak values of 20.71 µmol/(m2·s), 50,832 kg/ha, 35.63 g/kg, and 6.25 g/kg. This investigation provides a foundational basis for further research into the intricate relationship between water salinity stress and nutrient management, with the goal of crafting more sophisticated and sustainable farming methodologies. The insights gained could significantly influence organic fertilizer practices, promoting not only higher yields but also superior quality in agricultural outputs.

The Synergistic Production Effect of Water and Nitrogen on Winter Wheat in Southern Xinjiang.

Water and nitrogen management are crucial for food security and the efficient use of water and fertilizer, especially in arid regions. Three irrigation levels, namely, 80% crop water requirement (ETC) (W1), 100% ETC (W2), and 120% ETC (W3), and three nitrogen application levels, namely, 0 kg/ha (N1), 207 kg/ha (N2), and 276 kg/ha (N3), were used as the experimental treatments, and a control group, denoted as CK, was created. The results show that the maximum height achieved was 82.16 cm under W3N3. There was a single-peak variation trend throughout the growth stages of SPAD. It peaked at 58.44 under W3N3 and then at 27.9 under W2N2. The net photosynthetic and transpiration rates displayed bimodal peaks and the phenomenon of a "photosynthetic midday depression". And the prominent peaks in leaf water use efficiency occurred at 14:00 and 18:00, alongside noteworthy enhancements observed under the W3 treatment. Water and nitrogen and their interactions significantly affected the dry matter (DM) of winter wheat, with the spike accounting for the highest percentage. The W2N2 treatment demonstrated superior effectiveness in enhancing winter wheat water use efficiency, offering the potential to decrease irrigation requirements by 20% and nitrogen application by 25%. Moreover, the maximum PFPN attained under W2N2 reached 60.13, representing a noteworthy 35.25% increase compared to the control group (CK), but the HI of the W2N2 treatment only reached 0.56. The highest HI was achieved with W3N2 (0.73), and the nitrogen application of 207 kg/ha was more conducive to obtaining a higher HI. The highest yield was achieved under W3N3 (13.599 t/ha), followed by W2N2 (12.447 t/ha), and the spike proportion exceeded 60% with W2N2, and its production cost and economic benefit ratio of under 0.31 were superior to those for other treatments. Multiple regression analysis revealed that the maximum yield reached 12.944 t/ha with an irrigation amount of 3420.1 m3/ha and a nitrogen application of 251.92 kg/ha. Overall, our study suggests using an optimal water-nitrogen combination, specifically an irrigation level of 2829 m3/ha and a nitrogen application rate of 207 kg/ha, leading to increased winter wheat yields and economic benefits. These research results provide a pragmatic technique for improving winter wheat production in southern Xinjiang.

Enhancing salt tolerance and crop growth in agricultural systems: the impact of magnetized-ionized water irrigation on soil properties, microbial communities, and cotton growth.

BACKGROUND: The development of agricultural practices requires an understanding of the improvement of salt tolerance and crop growth in agricultural systems through magnetized-ionized water irrigation. METHOD: This study examined the impacts of fresh water (F), brackish water (B), magnetized-ionized fresh water (MIF), and magnetized-ionized brackish water (MIB) on soil properties and the growth of cotton seedlings through microbial analysis during the cotton seedling period. RESULTS: The results revealed that magnetized-ionized water irrigation improved soil water retention and promoted salt leaching. In comparison with F irrigation, plant height, leaf area index (LAI), dry matter accumulation (DM), and chlorophyll content (SPAD) levels increased by 3.61%, 4.07%, 5.76%, and 1.33%, respectively, under MIF irrigation. Similarly, when compared with B irrigation, LAI, DM, and SPAD increased by 5.13%, 6.12%, and 3.12% under MIB irrigation. Magnetized-ionized water irrigation also led to a notable rise in the relative abundance of beneficial soil bacterial communities, particularly Pseudomonas and Azoarcus, as well as fungal communities like Trichoderma, while reducing the prevalence of pathogenic fungi, such as Lasionectria, Gibberella, and Alternaria. Notably, this irrigation approach induced alterations in soil properties, and partial least squares path modeling revealed significant links between soil properties and both cotton growth and fungal community structure (with path coefficients of -0.884 and 0.693, respectively). CONCLUSION: This study elucidated the distinct effects of soil properties and growth indices on cotton yield during the seedling period, providing a crucial scientific foundation for enhancing future agricultural production through the use of magnetized-ionized water irrigation. © 2024 Society of Chemical Industry.

Response of cotton growth, yield, and water and nitrogen use efficiency to nitrogen application rate and ionized brackish water irrigation under film-mulched drip fertigation.

Introduction: The presence of brackish water resources is significant in addressing the scarcity of freshwater resources, particularly in the Xinjiang region. Studies focused on reducing adverse effect of brackish water irrigation based on using ionized brackish water, as well as on investigating its effects on fibre and oil plant production processes, remain incipient in the literature. Some benefits of this technique are the optimization of the quality and quantity of irrigation water, economy of water absorbed by the plants, improvement in the vegetative growth and productivity compared to irrigation using conventional brackish water. Thus, the aim of the current study is to assess the effect of different nitrogen application rates on soil water and salinity, cotton growth and water and nitrogen use efficiency. Methods: The experimental design consisted of completely randomized design with two water types (ionized and non-ionized) and six nitrogen application rates with four replications. Results: Irrigation conducted with ionized brackish water and different nitrogen application rates had significant effect on the plant height, leaf area index, shoot dry matter, boll number per plant and chlorophyll content. The study also demonstrated significant effects of ionized brackish water on soil water content and soil salinity accumulation. The highest cotton production was achieved with the use of 350 kg·ha-1 of ionized brackish water for irrigation, resulting in an average increase of 11.5% compared to the use of non-ionized brackish water. The nitrogen application exhibits a quadratic relationship with nitrogen agronomic use efficiency and apparent nitrogen use efficiency, while it shows a liner relationship with nitrogen physiological use efficiency and nitrogen partial productivity. After taking into account soil salinity, cotton yield, water and nitrogen use efficiency, the optimal nitrogen application rate for ionized brackish water was determined to be 300 kg·ha-1. Discussion: It is hoped that this study can contribute to improving water management, reducing the environmental impact without implying great costs for the producer.

Gradient phase and amplitude errors in atomic magnetic gradiometers for biomagnetic imaging systems.

The cross-axis projection error (CAPE) caused by residual magnetic fields has recently attracted widespread attention. In this study, we propose a more specific theoretical model and expand the CAPE in gradient measurements. We first report that differences in relaxation rate and residual magnetic field between optically pumped magnetometers (OPMs) introduce a significant error term in the output of OPM gradiometers, referred to as the gradient phase error. Furthermore, when the longitudinal field compensation is inadequate, the interaxial response interference of a single OPM is prominent, resulting in an amplitude distortion of the signal. This is further amplified in the gradiometer configuration, introducing the gradient amplitude error. Our experiments demonstrated that the efficacy of mitigating common-mode noise of OPM gradiometers was significantly impaired when existing the gradient errors. In addition, a simulation with a magnetoencephalography (MEG) system illustrated an induced source localization error of exceeding 2 cm, severely compromising the localization accuracy of OPM-MEG systems.

Facile Construction of Chestnut-Like Structural Fireproof PDMS/Mxene@BN for Advanced Thermal Management and Electromagnetic Shielding Applications.

Composite polymer materials featured superior thermal conductivity, flame retardancy, and electromagnetic shielding performance are increasingly in demand due to the rapid development of highly miniaturized, portable, and flexible electronic devices. Herein, a facile and green ball milling shear method is utilized for generating MXene@Boron nitride (MXene@BN). The multi-functional fillers (MXene@BN) are constructed and incorporated into polydimethylsiloxane (PDMS) to prepare a multifunctional composite (PDMS/MXene@BN) for achieving improved electromagnetic interference (EMI) shielding performance and thermal conductivity as well as flame retardancy simultaneously. When the PDMS/MXene@BN composite has a MXene@BN loading of 2.4 wt.%, it exhibits a high thermal conductivity of 0.59 W m-1K-1, which is 210% higher than that of the pure PDMS matrix. This is attributed to its unique chestnut-like double-layer structure. With a smoke production rate (SPR) of 0.04 m2 s-1 and total smoke production (TSP) of 3.51 m2, PDMS/MXene@BN 2.4 composite exhibits superb smoke suppression properties. These SPR and TSP values are 63.20% and 63.50% lower than the corresponding values of pure PDMS. Moreover, the EMI SE of the PDMS/MXene@BN 2.4 can reach 26.3 dB at 8.5 GHz. The work reported herein provides valuable insight into developing composites with multiple functions, which show strong potential for application in advanced packaging materials.

Identification and prediction of climate factors based on factor analysis and a grey prediction model in China.

Identifying and predicting the impacts of climate change are crucial for various purposes, such as maintaining biodiversity, agricultural production, ecological security, and environmental conservation in different regions. In this paper, we used the surface pressure (SP), surface temperature (ST), 2-m air temperature (AT), 2-m dewpoint temperature (DT), 10-m wind speed (WS), precipitation (PRE), relative humidity (RH), actual evapotranspiration (ETa), potential evapotranspiration (ETP), total solar radiation (TRs), net solar radiation (NRs), UV intensity (UVI), sunshine duration (SD), convective available potential energy (CAPE) as factors in our climate modeling. The spatiotemporal distribution characteristics of the climate factors were analyzed and identified based on historical data for China from 1950 to 2020 using factor analysis and a grey model (GM (1,1)), and their future change characteristics were predicted. The results show that there is a strong correlation between climate factors. ST, AT, DT, PRE, RH, and ETa are the main factors that have the potential to cause heavy rain, thunderstorms, and other severe weather. Meanwhile, PRE, RH, TRs, NRs, UVI, and SD are among the major factors linked to climate change. Specifically, SP, ST, AT, and WS are among the minor factors in most areas. The top ten provinces in terms of combined factor scores are Heilongjiang, Neimenggu, Qinghai, Beijing, Shandong, Xizang, Shanxi, Tianjin, Guangdong, and Henan. The trend of climate factors in China is expected to remain relatively stable over the next 30 years, with a noteworthy decrease observed in CAPE compared to the past 71 years. Our findings can help to better mitigate the risks associated with climate change and enhance resilience; they also provide a scientific basis for environmental, ecological, and agricultural systems to cope with climate change.

A new regional cotton growth model based on reference crop evapotranspiration for predicting growth processes.

Meteorological conditions and irrigation amounts are key factors that affect crop growth processes. Typically, crop growth and development are modeled as a function of time or growing degree days (GDD). Although the most important component of GDD is temperature, it can vary significantly year to year while also gradually shifting due to climate changes. However, cotton is highly sensitive to various meteorological factors, and reference crop evapotranspiration (ETO) integrates the primary meteorological factors responsible for global dryland extension and aridity changes. This paper constructs a cotton growth model using ETO, which improves the accuracy of crop growth simulation. Two cotton growth models based on the logistic model established using GDD or ETO as independent factors are evaluated in this paper. Additionally, this paper examines mathematical models that relate irrigation amount and irrigation water utilization efficiency (IWUE) to the maximum leaf area index (LAImax) and cotton yield, revealing some key findings. First, the model using cumulative reference crop evapotranspiration (CETO) as the independent variable is more accurate than the one using cumulative growing degree days. To better reflect the effects of meteorological conditions on cotton growth, this paper recommends using CETO as the independent variable to establish cotton growth models. Secondly, the maximum cotton yield is 7171.7 kg/ha when LAImax is 6.043 cm2/cm2, the corresponding required irrigation amount is 518.793 mm, and IWUE is 21.153 kg/(ha·mm). Future studies should consider multiple associated meteorological factors and use ETO crop growth models to simulate and predict crop growth and yield.

Research Progress with Membrane Shielding Materials for Electromagnetic/Radiation Contamination.

As technology develops at a rapid pace, electromagnetic and radiation pollution have become significant issues. These forms of pollution can cause many important environmental issues. If they are not properly managed and addressed, they will be everywhere in the global biosphere, and they will have devastating impacts on human health. In addition to minimizing sources of electromagnetic radiation, the development of lightweight composite shielding materials to address interference from radiation has become an important area of research. A suitable shielding material can effectively reduce the harm caused by electromagnetic interference/radiation. However, membrane shielding materials with general functions cannot effectively exert their shielding performance in all fields, and membrane shielding materials used in different fields must have specific functions under their use conditions. The aim of this review was to provide a comprehensive review of these issues. Firstly, the causes of electromagnetic/radiation pollution were briefly introduced and comprehensively identified and analyzed. Secondly, the strategic solutions offered by membrane shielding materials to address electromagnetic/radiation problems were discussed. Then, the design concept, technical innovation, and related mechanisms of the existing membrane shielding materials were expounded, the treatment methods adopted by scholars to study the environment and performance change laws were introduced, and the main difficulties encountered in this area of research were summarized. Finally, on the basis of a comprehensive analysis of the protection provided by membrane shielding materials against electromagnetic/radiation pollution, the action mechanism of membrane shielding materials was expounded in detail, and the research progress, structural design and performance characterization techniques for these materials were summarized. In addition, the future challenges were prospected. This review will help universities, research institutes, as well as scientific and technological enterprises engaged in related fields to fully understand the design concept and research progress of electromagnetic/radiation-contaminated membrane shielding materials. In addition, it is hoped that this review will facilitate efforts to accelerate the research and development of membrane shielding materials and offer potential applications in areas such as electronics, nuclear medicine, agriculture, and other areas of industry.

Synergistic effects of biochar and carboxymethyl cellulose sodium (CMC) applications on improving water retention and aggregate stability in desert soils.

Making improvements to the water-holding characteristics and water-erosion resistance of desert soils, particularly in inland extremely arid areas, is vital for achieving both sustainable water resource utilisation and food security. The aim of this study is to evaluate the effects of the co-application of biochar and carboxymethyl cellulose sodium (CMC) on the physical properties of sandy desert soil, including infiltration rate, saturated water conductivity, field water-holding capacity and aggregate stability. Sandy desert soil samples were collected from jujube plantations on the southern edge of the Taklimakan Desert in the Hotan Prefecture, Xinjiang, China. Five CMC application ratios (C0:0, C1:0.01 g/kg, C2:0.02 g/kg, C3:0.04 g/kg and C4:0.08 g/kg) and five biochar application ratios (B0:0, B1:1.0 g/kg, B2:2.0 g/kg, B3:4.0 g/kg and B4:8.0 g/kg) were designed and a total of 11 experimental treatments were performed, which were labelled as CK (control group), B2C0, B2C1, B2C2, B2C3, B2C4, B4C4, B0C2, B1C2, B3C2 and B4C2. Compared with CK, the combined application of biochar and CMC reduced the soil bulk density (BD) by 1.29-9.41% and the saturated hydraulic conductivity (Ks) by 29.64-94.98%, and increased the soil saturated water content (SSWC) by 8.81-30.74% and the water holding capacity (WHC) by 13.91-36.87%. Similarly, the water-stable aggregates that were co-applied with biochar and CMC increased by 29.10-256.86%. This resulted in significant improvement in the stability of sandy desert soil against water erosion. The principal component analysis (PCA) results found B4C4 to have the best comprehensive improvement effect. Therefore, 0.08 g/kg of CMC and 8.0 g/kg of biochar were used as recommended for improving the hydraulic properties of desert soils. Generally, CMC and biochar have a mutually complementary effect on improving sandy desert soil, providing new ideas and approaches for the improvement of soil and the sustainable development of agriculture in desert areas.

Combined effects of the earthworm casts application and fallow time on runoff and sediment loss by raindrop splashing in the Loess Plateau, China.

The importing of sources of exogenous organic carbon is an effective method for the prevention of soil degradation in sloping soils. Earthworm casts (ECs) have been recognised as a contributor to long-term carbon protection, but relatively few studies have examined the temporal impact ECs have on the achievement of this goal and its efficacy in the mitigation of soil erosion challenges in the Loess Plateau region in China. This study conducted field simulated rainfall experiments as a means of investigating the effects of five ECs (0, 200, 400, 600 and 800 g/m2, labelled CG, E1, E2, E3 and E4) on runoff, sediment and soil aggregate composition after 60, 90 and 150 days of fallow. As E4 was fallow for 150 days, the total runoff, runoff coefficient and total sediment amount decreased by 34.0%, 37.6% and 82.80% in comparison to CG. The runoff and sediment analytical models were able to accurately simulate the runoff and sediment yield processes through ECs application (R2≥0.704, RMSE≤1.108, NSE≥0.513). After being fallow for 150 days, soil sorptivity (S) increased from 0.151 cm/min0.5 to 0.310 cm/min0.5 as ECs application quantity increased. In contrast, the calibration constants of splash erosion (Cr) decreased from 0.150 to 0.090 and runoff erosion (Cf) decreased from 0.120 to 0.081. ECs were found to considerably enhance the number of aggregates that were more prominent than 0.25 mm in size. When E4 was fallow for 150 days, the fraction of >0.25 mm aggregate (WSA0.25) increased by 120.69% in comparison to CG. The mean weight diameter (MWD) grew by 105.96%, the geometric mean diameter (GMD) increased by 98.81% and the soil erodibility value K improved by 43.78%. When the amount of ECs was 800 g/m2, the stability of soil aggregates was effectively improved against water erosion while runoff and sediment transport were controlled. This can help improve the current soil and water loss situation in the Loess Plateau while also improving cultivated land soil quality. At the same time, a longer fallow period time promotes soil aggregate formation. This study is focused on the exceptional performance of ECs in limiting soil erosion on the Loess Plateau in China, which may provide novel solutions for soil and water conservation and the prevention of non-point source pollution.

Hybrid algorithm for predicting the temperature-variation-induced wavelength drift of DBR semiconductor lasers.

In this paper, a hybrid algorithm to predict the wavelength drift induced by ambient temperature variation in distributed Bragg reflector semiconductor lasers is proposed. This algorithm combines the global search capability of a genetic algorithm (GA) and the supermapping ability of an extreme learning machine (ELM), which not only avoids the randomness of ELM but also improves its generalization performance. In addition, a tenfold cross-validation method is employed to determine the optimal activation function and the number of hidden layer nodes for ELM to construct the most suitable model. After applying multiple sets of test data, the results demonstrate that GA-ELM can quickly and accurately predict the wavelength drift, with an average rms error of 4.09×10-4nm and average mean absolute percentage error of 0.21 %. This model is expected to combine the temperature and current tuning models for a wavelength in follow-up research to achieve rapid tuning and high stability of a wavelength without additional devices.

An Ultra-Stretchable Polyvinyl Alcohol Hydrogel Based on Tannic Acid Modified Aramid Nanofibers for Use as a Strain Sensor.

The mechanical performance is critical for hydrogels that are used as strain sensors. p-Aramid nanofiber (ANF) is preferable as an additive to the reinforce the mechanical performance of a poly(vinyl alcohol) (PVA). However, due to the limited hydrogen bond sites, the preparation of ultra-stretchable, ANF-based hydrogel strain sensor is still a challenge. Herein, we reported an ultra-stretchable PVA hydrogel sensor based on tea stain-inspired ANFs. Due to the presence of numerous phenol groups in the tannic acid (TA) layer, the interaction between PVA and the ANFs was significantly enhanced even though the mass ratio of TA@ANF in the hydrogel was 2.8 wt‱. The tensile breaking modulus of the PVA/TA@ANF/Ag hydrogel sensor was increased from 86 kPa to 326 kPa, and the tensile breaking elongation was increased from 356% to 602%. Meanwhile, the hydrogel became much softer, and no obvious deterioration of the flexibility was observed after repeated use. Moreover, Ag NPs were formed in situ on the surfaces of the ANFs, which imparted the sensor with electrical conductivity. The hydrogel-based strain sensor could be used to detect the joint movements of a finger, an elbow, a wrist, and a knee, respectively. This ultra-stretchable hydrogel described herein was a promising candidate for detecting large-scale motions.

Clinical value of lncRNA SOX2-OT in pulmonary arterial hypertension and its role in pulmonary artery smooth muscle cell proliferation, migration, apoptosis, and inflammatory.

BACKGROUND: Non-coding RNA is confirmed to be involved in pulmonary arterial hypertension (PAH). OBJECTIVES: This study investigated the clinical value and potential mechanisms of the long noncoding RNA (lncRNA) SRY-box transcription factor 2 overlapping transcript (SOX2-OT) in PAH. METHODS: SOX2-OT levels were measured by quantitative real-time polymerase chain reaction (qRT-PCR) in serum of 82 patients with PAH and 76 healthy controls. Receiver operating characteristic (ROC) analysis was performed to assess the diagnostic value of SOX2-OT. Human pulmonary arterial smooth muscle cells (hPASMCs) were treated by hypoxia to construct PAH cell models. Proliferation, migration, apoptosis, and inflammatory cytokines levels of hPASMCs were examined by CCK-8, Transwell, flow cytometry, and ELISA assay. Dual-luciferase reporter gene assays were performed to verify the target relationships between miR-455-3p and SOX2-OT, as well as small ubiquitin-related modifier 1 (SUMO1). RESULTS: Serum SOX2-OT was highly expressed in patients with PAH (P < 0.05). And elevated SOX2-OT levels significantly differentiated PAH patients from healthy controls, confirming high diagnostic feasibility. What's more, SOX2-OT was increased in hypoxia-induced hPASMCs in a time-dependent manner. Silencing SOX2-OT could reverse hypoxia-induced proliferation, migration, anti-apoptosis, and inflammation of hPASMCs (P < 0.05). However, rescue experiments showed that this reversal effect of silencing SOX2-OT was attenuated by suppressed miR-455-3p, which was presumably achieved by SUMO1 (P < 0.05). CONCLUSIONS: Elevated SOX2-OT is a feasible diagnostic marker for PAH, and its silencing may attenuated hypoxia-induced hPASMCs proliferation, migration, anti-apoptosis, and inflammation by modulating the miR-455-3p/SUMO1 axis, preventing vascular remodeling and PAH progression. Our research provided new insights for PAH treatment.

Terraced and 3D Pyramid-Shaped Polymer Single Crystal via Low Temperature-Assisted Microfluidic Technology.

3D pyramidal polymer single crystals provide spatial gradient variations within the crystal molecules, and these variations facilitate the study of the relationship between structure and properties within the molecules of various complexes with anisotropic structures. As described herein, a low-temperature-assisted microfluidic pore channeling approach is proposed to prepare structurally ordered polymer single crystals. A mixture of dichloromethane and dimethyl sulfoxide is used as a prepolymer, and a liquid microfluidic technique is employed to grow the end-functionalized polymers into 3D polymer single crystals. Through the ordered growth of single crystals, a personalized pyramidal pattern with a homogeneous structure is formed. To evaluate the mesh node density, low-temperature growth time and substrate type are also investigated. Rectangular, pyramidal, and dendritic patterns are synthesized via low-temperature single crystal growth. This work shows that low temperature-assisted microfluidics provides a novel means to tune the 3D structure of polymer single crystals.

Compact Design of Annular-Microstrip-Fed mmW Antenna Arrays.

In this paper, a series of four novel microstrip antenna array designs based on different annular-microstrip feeding lines at 60-GHz millimeter wave (mmW) band are proposed, aiming at the potential usage of the mmW coverage antenna with multi-directional property. As the feeding network, the annular contour microstrip lines are employed to connect the patch units so as to form a more compact array. Our first design is to use an outer contour annular microstrip line to connect four-direction linear arrays composed of 1 × 3 rectangular patches, thus the gain of 8.4 dBi and bandwidth of over 300 MHz are obtained. Our second design is to apply the two-direction pitchfork-shaped array each made up of two same linear arrays as the above, therefore the gain of 9.65 dBi and bandwidth of around 250 MHz are achieved. Our third design is to employ dual (inner and outer contour) annular-microstrip feeding lines to interconnect the above four-direction linear arrays, while our fourth design is to bring bridged annular-microstrip feeding lines, both of which can realize the goal of multi-directional radiation characteristic and higher gain of over 10 dBi.

Composite Aramid Membranes with High Strength and pH-Response.

The pH-responsive membrane is a new wastewater treatment technology developed in recent years. In this paper, a novel film with intelligent pH-responsiveness was first prepared by blending functional gates comprised of hydrolyzed aramid nanofibers (HANFs) into aramid nanofiber (ANF) membranes via a vacuum filtration method. Those as-prepared membranes exhibited dual pH-responsive characteristics, which were featured with a negative pH-responsiveness in an acidic environment and a positive pH-responsiveness in basic media. These dual pH-responsive membranes also exhibited a high tensile strength which could still reach 55.74 MPa (even when the HANFs content was as high as 50 wt%), a high decomposition temperature at ~363 °C, and good solvent resistance. The membranes described herein may be promising candidates for a myriad of applications, such as the controlled release of drugs, sensors, sewage treatment, etc.

Controllable antibacterial and bacterially anti-adhesive surface fabricated by a bio-inspired beetle-like macromolecule.

Drug resistance to bacteria becomes an emerging intractable problem, therefore, developing novel antibacterial agents has become urgently needed. Herein, a bio-inspired design strategy was adopted to synthesize a series of beetle-like macromolecule of multiple quaternary ammonium salts (QASs), which was designed with different cationic charge densities and numbers of hexadecane chains by adjusting their different quaternization degree (QD). It was found that the fabricated fabric surface with them exhibited controllable and outstanding antibacterial and bacterially anti-adhesive properties. More importantly, the antibacterial efficiency was demonstrated to be enhanced with the increasing of QD, and related to the zeta potential, and surface tension. Additionally, the proposed bacterially anti-adhesive model of action revealed the "resisting effect" of hydration layer which greatly resisted the adhesion of bacteria.