Arsenic and antimony geochemistry of historical roaster waste from the Giant Mine, Yellowknife, Canada.

Historical mining and mineral processing at the former Giant Mine (Yellowknife, NT, Canada) created an enduring legacy of arsenic (As) and antimony (Sb) contamination. Approximately 237,000 tonnes of arsenic trioxide roaster waste (ATRW) generated between 1948 and 1999 remains stored on-site in underground chambers. We studied the chemical forms and phase associations of As and Sb to improve understanding of ATRW environmental behavior. Although arsenolite [As2O3] is the principal As and Sb host, we also observed minor associations of As with Fe oxides. Arsenic K-edge X-ray absorption spectroscopy (XAS) revealed As(III) dominated ATRW, with some As(V) and As(-I) also present. Arsenic coordination and bonding is consistent with arsenolite, while scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) showed minor As association with Fe oxides and arsenopyrite [FeAsS]. Antimony K-edge XAS revealed variable proportions of Sb(III) and Sb(V), with Sb-O, Sb-Sb and Sb-As bonding consistent with stibioclaudetite [AsSbO3] or Sb-substituted arsenolite. Electron microprobe analysis (EMPA) results showed variable but quantitative Sb substitution for As in arsenolite grains, possibly influencing ATRW solubility and reactivity under environmental conditions. Overall, our results reveal complex As and Sb phase associations with important implications for ongoing remediation efforts and long-term environmental fate of ATRW solids.

X-ray absorption spectroscopy and X-ray diffraction data for molybdenum minerals and compounds.

We report Mo K- and LIII-edge X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) data collected for 15 molybdenum minerals and compounds sourced from museum collections, mineral dealers, and chemical suppliers. The samples were finely ground and analyzed at the Canadian Light Source synchrotron (Saskatoon, Canada). The LIII-edge XAS data were collected in fluorescence and total electron yield mode, while the K-edge XAS data were collected in transmission and fluorescence modes. Molybdenum LIII-edge spectra cover the X-ray absorption near edge structure (XANES) region and Mo K-edge spectra cover the extended X-ray absorption fine structure (EXAFS) region. Tabulated XAS data are provided to support analysis of XAS data obtained for geological or environmental research. Furthermore, Mo K-edge EXAFS and LIII-edge XANES spectra, the k3 weighted oscillatory χ(k) functions, and the Fourier-transforms in χ(R) of these K-edge data are presented graphically. Corresponding XRD data were collected as two-dimensional images against an area detector and integrated to form line scans. The data were collected at a wavelength of 0.68866 Å (18 keV) and is tabulated and presented graphically over a 0-40 °2Θ range. This dataset is intended to be used as reference material for a variety of rare and common Mo phases.

Alum Addition Triggers Hypoxia in an Engineered Pit Lake.

Here, we examine the geobiological response to a whole-lake alum (aluminum sulfate) treatment (2016) of Base Mine Lake (BML), the first pilot-scale pit lake established in the Alberta oil sands region. The rationale for trialing this management amendment was based on its successful use to reduce internal phosphorus loading to eutrophying lakes. Modest increases in water cap epilimnetic oxygen concentrations, associated with increased Secchi depths and chlorophyll-a concentrations, were co-incident with anoxic waters immediately above the fluid fine tailings (FFT) layer post alum. Decreased water cap nitrate and detectable sulfide concentrations, as well as increased hypolimnetic phospholipid fatty acid abundances, signaled greater anaerobic heterotrophic activity. Shifts in microbial community to groups associated with greater organic carbon degradation (i.e., SAR11-LD12 subclade) and the SRB group Desulfuromonodales emerged post alum and the loss of specialist groups associated with carbon-limited, ammonia-rich restricted niches (i.e., MBAE14) also occurred. Alum treatment resulted in additional oxygen consumption associated with increased autochthonous carbon production, watercap anoxia and sulfide generation, which further exacerbate oxygen consumption associated with on-going FFT mobilized reductants. The results illustrate the importance of understanding the broader biogeochemical implications of adaptive management interventions to avoid unanticipated outcomes that pose greater risks and improve tailings reclamation for oil sands operations and, more broadly, the global mining sector.

Geochemical conditions influence vanadium, nickel, and molybdenum release from oil sands fluid petroleum coke.

Petroleum coke is a potential source of vanadium (V), nickel (Ni), and molybdenum (Mo) to water resources in Athabasca Oil Sands Region (AOSR) of northern Alberta, Canada. Large stockpiles of this bitumen upgrading byproduct will be incorporated into mine closure landscapes and understanding the processes and conditions controlling the release and transport of these transition metals is critical for effective reclamation. We performed a series of laboratory column experiments to quantify V, Ni, and Mo release from fluid petroleum coke receiving meteoric water (MW), oil sands process-affected water (OSPW), and acid rock drainage (ARD) influents. We found that influent water chemistry strongly influences metal release, with variations among metals largely attributed to pH-dependent aqueous speciation and surface reactions. Cumulative V, Ni, and Mo mass release was greatest for columns receiving the low-pH ARD influent. Additionally, cumulative V and Mo mass release were greater in columns receiving OSPW compared to MW influent, whereas cumulative Ni mass release was greater in columns receiving MW compared to OSPW influent. Nevertheless, only a small proportion of total V, Ni, and Mo was released during the experiments, with the majority occurring during the first 10 pore volumes (PVs). This study offers insight into geochemical controls on V, Ni, and Mo release from fluid petroleum coke that supports ongoing development of oil sands mine reclamation strategies for landscapes that contain petroleum coke.

Seasonal Dynamics of Methanotrophic Bacteria in a Boreal Oil Sands End Pit Lake.

Base Mine Lake (BML) is the first full-scale demonstration end pit lake for the oil sands mining industry in Canada. We examined aerobic methanotrophic bacteria over all seasons for 5 years in this dimictic lake. Methanotrophs comprised up to 58% of all bacterial reads in 16S rRNA gene amplicon sequencing analyses (median 2.8%), and up to 2.7 × 104 cells mL-1 of water (median 0.5 × 103) based on qPCR of pmoA genes. Methanotrophic activity and populations in the lake water were highest during fall turnover and remained high through the winter ice-covered period into spring turnover. They declined during summer stratification, especially in the epilimnion. Three methanotroph genera (Methylobacter, Methylovulum, and Methyloparacoccus) cycled seasonally, based on both relative and absolute abundance measurements. Methylobacter and Methylovulum populations peaked in winter/spring, when methane oxidation activity was psychrophilic. Methyloparacoccus populations increased in the water column through summer and fall, when methane oxidation was mesophilic, and also predominated in the underlying tailings sediment. Other, less abundant genera grew primarily during summer, possibly due to distinct CH4/O2 microniches created during thermal stratification. These data are consistent with temporal and spatial niche differentiation based on temperature, CH4 and O2. This pit lake displays methane cycling and methanotroph population dynamics similar to natural boreal lakes. IMPORTANCE The study examined methanotrophic bacteria in an industrial end pit lake, combining molecular DNA methods (both quantitative and descriptive) with biogeochemical measurements. The lake was sampled over 5 years, in all four seasons, as often as weekly, and included sub-ice samples. The resulting multiseason and multiyear data set is unique in its size and intensity, and allowed us to document clear and consistent seasonal patterns of growth and decline of three methanotroph genera (Methylobacter, Methylovulum, and Methyloparacoccus). Laboratory experiments suggested that one major control of this succession was niche partitioning based on temperature. The study helps to understand microbial dynamics in engineered end pit lakes, but we propose that the dynamics are typical of boreal stratified lakes and widely applicable in microbial ecology and limnology. Methane-oxidizing bacteria are important model organisms in microbial ecology and have implications for global climate change.

Ebullition enhances chemical mass transport across the tailings-water interface of oil sands pit lakes.

Base Mine Lake (BML) was the first commercial-scale demonstration oil sands pit lake established in northern Alberta, Canada. Recent studies indicate that ebullition enhances internal mass loading of dissolved constituents during settlement and dewatering of methanogenic fluid fine tailings (FFT) below the overlying water cap. Here, we describe results of integrated field measurements and numerical modelling to (i) determine potential for ebullition and enhanced mixing within BML, and (ii) assess impacts on chemical mass transport across the tailings-water interface. We observed sharp increases in [CH4(aq)] with depth from <0.1 mg L-1 immediately above the interface to >60 mg L-1 over the upper 1.5 to 3.0 m of FTT. Thermodynamic modelling revealed that maximum [CH4(aq)] values represent 60 to 80% of theoretical saturation, and corresponding total dissolved gas pressures approach or exceed fluid pressures. These findings supported integration of enhanced mixing into one-dimensional (1-D) advective-dispersive transport models, which substantially improved upon previous simulations of conservative tracer (i.e., Cl-) profiles and chemical mass fluxes. The models revealed a positive relationship between CH4(aq) saturation and enhanced mixing, showing that ebullition enhances internal mass loading. This information has potential to inform ongoing assessments of pit lake performance and support improved closure and reclamation planning at oil sands mines.

Isotopic and Chemical Assessment of the Dynamics of Methane Sources and Microbial Cycling during Early Development of an Oil Sands Pit Lake.

Water-capped tailings technology (WCTT) is a key component of the reclamation strategies in the Athabasca oil sands region (AOSR) of northeastern Alberta, Canada. The release of microbial methane from tailings emplaced within oil sands pit lakes, and its subsequent microbial oxidation, could inhibit the development of persistent oxygen concentrations within the water column, which are critical to the success of this reclamation approach. Here, we describe the results of a four-year (2015-2018) chemical and isotopic (δ13C) investigation into the dynamics of microbial methane cycling within Base Mine Lake (BML), the first full-scale pit lake commissioned in the AOSR. Overall, the water-column methane concentrations decreased over the course of the study, though this was dynamic both seasonally and annually. Phospholipid fatty acid (PLFA) distributions and δ13C demonstrated that dissolved methane, primarily input via fluid fine tailings (FFT) porewater advection, was oxidized by the water column microbial community at all sampling times. Modeling and under-ice observations indicated that the dissolution of methane from bubbles during ebullition, or when trapped beneath ice, was also an important source of dissolved methane. The addition of alum to BML in the fall of 2016 impacted the microbial cycling in BML, leading to decreased methane oxidation rates, the short-term dominance of a phototrophic community, and longer-term shifts in the microbial community metabolism. Overall, our results highlight a need to understand the dynamic nature of these microbial communities and the impact of perturbations on the associated biogeochemical cycling within oil sands pit lakes.

Aqueous Vanadate Removal by Iron(II)-Bearing Phases under Anoxic Conditions.

Vanadium contamination is a growing environmental hazard worldwide. Aqueous vanadate (HxVVO4(3-x)-(aq)) concentrations are often controlled by surface complexation with metal (oxyhydr)oxides in oxic environments. However, the geochemical behavior of this toxic redox-sensitive oxyanion in anoxic environments is poorly constrained. Here, we describe results of batch experiments to determine kinetics and mechanisms of aqueous H2VVO4- (100 µM) removal under anoxic conditions in suspensions (2.0 g L-1) of magnetite, siderite, pyrite, and mackinawite. We present results of parallel experiments using ferrihydrite (2.0 g L-1) and Fe2+(aq) (200 µM) for comparison. Siderite and mackinawite reached near complete removal (46 µmol g-1) of aqueous vanadate after 3 h and rates were generally consistent with ferrihydrite, whereas magnetite removed 18 µmol g-1 of aqueous vanadate after 48 h and uptake by pyrite was limited. Removal during reaction with Fe2+(aq) was observed after 8 h, concomitant with precipitation of secondary Fe phases. X-ray absorption spectroscopy revealed V(V) reduction to V(IV) and formation of bidentate corner-sharing surface complexes on magnetite and siderite, and with Fe2+(aq) reaction products. These data also suggest that V(IV) is incorporated into the mackinawite structure. Overall, we demonstrate that Fe(II)-bearing phases can promote aqueous vanadate attenuation and, therefore, limit dissolved V concentrations in anoxic environments.

Putative Mixotrophic Nitrifying-Denitrifying Gammaproteobacteria Implicated in Nitrogen Cycling Within the Ammonia/Oxygen Transition Zone of an Oil Sands Pit Lake.

Anthropogenically-impacted environments offer the opportunity to discover novel microbial species and metabolisms, which may be undetectable in natural systems. Here, a combined metagenomic and geochemical study in Base Mine Lake, Alberta, Canada, which is the only oil sands end pit lake to date, revealed that nitrification was performed by members from Nitrosomonadaceae, Chloroflexi and unclassified Gammaproteobacteria "MBAE14." While Nitrosomonadaceae and Chloroflexi groups were relatively abundant in the upper oxygenated zones, MBAE14 dominated the hypoxic hypolimnetic zones (approximately 30% of total microbial communities); MBAE14 was not detected in the underlying anoxic tailings. Replication rate analyses indicate that MBAE14 grew in metalimnetic and hypolimnetic water cap regions, most actively at the metalimnetic, ammonia/oxygen transition zone consistent with it putatively conducting nitrification. Detailed genomic analyses of MBAE14 evidenced both ammonia oxidation and denitrification into dinitrogen capabilities. However, the absence of known CO2-fixation genes suggests a heterotrophic denitrifying metabolism. Functional marker genes of ammonia oxidation (amo and hao) in the MBAE14 genome are homologous with those conserved in autotrophic nitrifiers, but not with those of known heterotrophic nitrifiers. We propose that this novel MBAE14 inhabits the specific ammonia-rich, oxygen and labile organic matter-limited conditions occurring in Base Mine Lake which selectively favors mixotrophic coupled nitrifier denitrification metabolism. Our results highlight the opportunities to better constrain biogeochemical cycles from the application of metagenomics to engineered systems associated with extractive resource sectors.

Tracing Molybdenum Attenuation in Mining Environments Using Molybdenum Stable Isotopes.

Molybdenum contamination is a concern in mining regions worldwide. Better understanding of processes controlling Mo mobility in mine wastes is critical for assessing potential impacts and developing water-quality management strategies associated with this element. Here, we used Mo stable isotope (δ98/95Mo) analyses to investigate geochemical controls on Mo mobility within a tailings management facility (TMF) featuring oxic and anoxic environments. These isotopic analyses were integrated with X-ray absorption spectroscopy, X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and aqueous chemical data. Dissolved Mo concentrations were inversely correlated with δ98/95Mo values such that enrichment of heavy Mo isotopes in solution reflected attenuation processes. Inner-sphere complexation of Mo(VI) with ferrihydrite was the primary driver of Mo removal and was accompanied by a ca. 1‰ isotope fractionation. Limited Mo attenuation and isotope fractionation were observed in Fe(II)- and Mo-rich anoxic TMF seepage, while attenuation and isotope fractionation were greatest during discharge and oxidation of this seepage after discharge into a pond where Fe-(oxyhydr)oxide precipitation promoted Mo sorption. Overall, this study highlights the role of sorption onto Fe-(oxyhydr)oxides in attenuating Mo in oxic environments, a process which can be traced by Mo isotope analyses.

Aqueous- and solid-phase molybdenum geochemistry of oil sands fluid petroleum coke deposits, Alberta, Canada.

Fluid petroleum coke generated at oil sands operations in the Athabasca Oil Sands Region of northern Alberta, Canada, contains elevated concentrations of molybdenum (Mo) and other metals including nickel (Ni) and vanadium (V). Solid-phase Mo concentrations in fluid petroleum coke are typically 10 to 100 times lower than V and Ni, yet dissolved Mo concentrations in associated pore waters are often comparable with these metals. We collected pore water and solids from fluid petroleum coke deposits in the AOSR to examine geochemical controls on Mo mobility. Dissolved Mo concentrations increased with depth below the water table, reaching maxima of 1.4-2.2 mg L-1, within a mixing zone between slightly acidic and oxic meteoric water and mildly alkaline and anoxic oil sands process-affected water (OSPW). Dissolved Mo concentrations decreased slightly with depth below the mixing zone. X-ray absorption spectroscopy revealed that Mo(VI) and Mo(IV) species were present in coke solids. The Mo(VI) occurred as tetrahedrally coordinated MoO42- adsorbed via inner- and outer-sphere complexation, and was coordinated in an environment similar to Fe-(hydr)oxide surface complexes. The OSPW likely promoted desorption of outer-sphere Mo(VI) complexes, resulting in higher dissolved Mo concentrations in the mixing zone. The principal Mo(IV) species was MoS2, which originated as a catalyst added upstream of the fluid coking process. Although MoS2 is likely stable under anoxic conditions below the mixing zone, oxidative weathering in the presence of meteoric water may promote long-term Mo release.

Vanadium Geochemistry of Oil Sands Fluid Petroleum Coke.

Vanadium has previously been linked to elevated toxicity of leachates derived from oil sands petroleum coke. However, geochemical controls on V mobility within coke deposits remain poorly constrained. Detailed examinations of porewater and solid-phase V geochemistry were therefore performed on oil sands fluid petroleum coke deposits in Alberta, Canada. Sample collection focused on both active and reclaimed deposits, which contained more than 3 × 107 m3 of fluid petroleum coke. Dissolved V concentrations were highest (up to 3.0 mg L-1) immediately below the water table but decreased rapidly with increasing depth. This trend corresponded to a transition from mildly acidic (pH 6-7) and oxic conditions to mildly alkaline (pH 7-8.5) and anoxic conditions. Scanning electron microscopy (SEM), electron microprobe analysis (EMPA), and micro-X-ray fluorescence (µXRF) mapping revealed coke particles exhibited an internal structure characterized by successive concentric layers. The outer margins of these layers were characterized by elevated V, Fe, Si, and Al concentrations, indicating the presence of inorganic phases. Micro-X-ray absorption near-edge structure (µXANES) spectroscopy revealed that V speciation was dominated by V(IV) porphyrins except at outer margins of layers, where octahedrally coordinated V(III) was a major component. Minor to trace V(V) was also detected within fluid petroleum coke particles.

Dissolved Selenium(VI) Removal by Zero-Valent Iron under Oxic Conditions: Influence of Sulfate and Nitrate.

Dissolved Se(VI) removal by three commercially available zero-valent irons (ZVIs) was examined in oxic batch experiments under circumneutral pH conditions in the presence and absence of NO3 - and SO4 2-. Environmentally relevant Se(VI) (1 mg L-1), NO3 - ([NO3-N] = 15 mg L-1), and SO4 2- (1800 mg L-1) were employed to simulate mining-impacted waters. Ninety percent of Se(VI) removal was achieved within 4-8 h in the absence of SO4 2- and NO3 -. A similar Se(VI) removal rate was observed after 10-32 h in the presence of NO3 -. Dissolved Se(VI) removal rates exhibited the highest decrease in the presence of SO4 2-; 90% of Se(VI) removal was measured after 50-191 h for SO4 2- and after 150-194 h for SO4 2- plus NO3 - depending on the ZVI tested. Despite differences in removal rates among batches and ZVI materials, Se(VI) removal consistently followed first-order reaction kinetics. Scanning electron microscopy, Raman spectroscopy, and X-ray diffraction analyses of reacted solids showed that Fe(0) present in ZVI undergoes oxidation to magnetite [Fe3O4], wüstite [FeO], lepidocrocite [γ-FeOOH], and goethite [α-FeOOH] over time. X-ray absorption near-edge structure spectroscopy indicated that Se(VI) was reduced to Se(IV) and Se(0) during removal. These results demonstrate that ZVI can be effectively used to control Se(VI) concentrations in mining-impacted waters.

Initial geochemical characteristics of fluid fine tailings in an oil sands end pit lake.

Geochemical characteristics of fluid fine tailings (FFT) were examined in Base Mine Lake (BML), which is the first full-scale demonstration oil sands end pit lake (EPL) in northern Alberta, Canada. Approximately 186Mm(3) of FFT was deposited between 1994 and 2012, before BML was established on December 31, 2012. Bulk FFT samples (n=588) were collected in July and August 2013 at various depths at 15 sampling sites. Temperature, solid content, electrical conductivity (EC), pH, Eh and alkalinity were measured for all samples. Detailed geochemical analyses were performed on a subset of samples (n=284). Pore-water pH decreased with depth by approximately 0.5 within the upper 10m of the FFT. Major pore-water constituents included Na (880±96mgL(-1)) and Cl (560±95mgL(-1)); Ca (19±4.1mgL(-1)), Mg (11±2.0mgL(-1)), K (16±2.3mgL(-1)) and NH3 (9.9±4.7mgL(-1)) were consistently observed. Iron and Mn concentrations were low within FFT pore water, whereas SO4 concentrations decreased sharply across the FFT-water interface. Geochemical modeling indicated that FeS(s) precipitation was favoured under SO4-reducing conditions. Pore water was also under-saturated with respect to gypsum [CaSO4·2H2O], and near saturation with respect to calcite [CaCO3], dolomite [CaMg(CO3)2] and siderite [FeCO3]. X-ray diffraction (XRD) suggested that carbonate-mineral dissolution largely depleted calcite and dolomite. X-ray absorption near edge structure (XANES) spectroscopy revealed the presence of FeS(s), pyrite [FeS2], and siderite. Carbonate-mineral dissolution and secondary mineral precipitation have likely contributed to FFT dewatering and settlement. However, the long-term importance of these processes within EPLs remains unknown. These results provide a reference for assessing the long-term geochemical evolution of oil sands EPLs, and offer insight into the chemistry of pore water released from FFT to the overlying water cover.

Assessing cellulolysis in passive treatment systems for mine drainage: a modified enzyme assay.

A modified cellulase enzyme assay was developed to monitor organic matter degradation in passive treatment systems for mine drainage. This fluorogenic substrate method facilitates assessment of exo-(1,4)-ß-D-glucanase, endo-(1,4)-ß-D-glucanase, and ß-glucosidase, which compose an important cellulase enzyme system. The modified method was developed and refined using samples of organic carbon-amended mine tailings from field experiments where sulfate reduction was induced as a strategy for managing water quality. Sample masses (3 g) and the number of replicates ( ≥ 3) were optimized. Matrix interferences within these metal-rich samples were found to be insignificant. Application of this modified cellulase assay method provided insight into the availability and degradation of organic carbon within the amended tailings. Results of this study indicate that cellulase enzyme assays can be applied to passive treatment systems for mine drainage, which commonly contain elevated concentrations of metals.

Mechanistic investigations of Se(VI) treatment in anoxic groundwater using granular iron and organic carbon: an EXAFS study.

The removal of aqueous Se(VI) from a simulated groundwater by granular iron (GI), organic carbon (OC), and a mixture of these reactive materials (GI-OC) was evaluated in laboratory batch experiments. The experiments were performed under anoxic conditions to simulate subsurface treatment. A total reaction time of 120 h (5 d) was chosen to investigate the rapid changes in speciation occurring over reaction times that are reasonable for permeable reactive barrier (PRB) systems. After 120 h, concentrations of Se decreased by >90% in the GI system, 15% in the OC system and 35% in the GI-OC mixture. Analysis of the materials after contact with Se using synchrotron-radiation based X-ray absorption spectroscopy (XAS) indicated the presence of Se(IV) and Se(0) on the margins of GI grains after 6h with evidence of SeO and SeSe bonding, whereas Se(VI) was not observed. After 72 h, Se(0) was the only form of Se present in the GI experiments. In the OC batches, the XAS analysis indicated binding consistent with sorption of aqueous Se(VI) onto the OC with only minor reduction to Se(IV) and Se(0) after 120 h. Selenium XAS spectra collected for the GI-OC mixture were consistent with spectra for Se(IV) and Se(0) on both the margins of GI grains and OC particles, suggesting that the presence of dissolved Fe may have mediated the reduction of sorbed Se(VI). The results suggest that the application of granular Fe is effective at inducing aqueous Se removal in anoxic conditions through reductive precipitation processes.

Chromium isotope fractionation during reduction of Cr(VI) under saturated flow conditions.

Chromium isotopes are potentially useful indicators of Cr(VI) reduction reactions in groundwater flow systems; however, the influence of transport on Cr isotope fractionation has not been fully examined. Laboratory batch and column experiments were conducted to evaluate isotopic fractionation of Cr during Cr(VI) reduction under both static and controlled flow conditions. Organic carbon was used to reduce Cr(VI) in simulated groundwater containing 20 mg L(-1) Cr(VI) in both batch and column experiments. Isotope measurements were performed on dissolved Cr on samples from the batch experiments, and on effluent and profile samples from the column experiment. Analysis of the residual solid-phase materials by scanning electron microscopy (SEM) and by X-ray absorption near edge structure (XANES) spectroscopy confirmed association of Cr(III) with organic carbon in the column solids. Decreases in dissolved Cr(VI) concentrations were coupled with increases in δ(53)Cr, indicating that Cr isotope enrichment occurred during reduction of Cr(VI). The δ(53)Cr data from the column experiment was fit by linear regression yielding a fractionation factor (α) of 0.9979, whereas the batch experiments exhibited Rayleigh-type isotope fractionation (α = 0.9965). The linear characteristic of the column δ(53)Cr data may reflect the contribution of transport on Cr isotope fractionation.

Examining mechanisms of groundwater Hg(II) treatment by reactive materials: an EXAFS study.

Laboratory batch experiments were conducted to examine mechanisms of Hg(II) removal by reactive materials proposed for groundwater treatment. These materials included granular iron filings (GIF), 1:1 (w/w) mixtures of metallurgical granular Fe powder + elemental S (MGI+S) and elemental Cu + elemental S (Cu+S), granular activated carbon (GAC), attapulgite clay (ATP), ATP treated with 2-amino-5-thiol-1,3,4-thiadiazole (ATP-a), and ATP treated with 2,5-dimercapto-1,3,4-thiadiazole (ATP-d). Following treatment of simulated groundwater containing 4 mg L(-1) Hg for 8 or 16 days, the solution pH values ranged from 6.8 to 8.8 and Eh values ranged from +400 to -400 mV. Large decreases in aqueous Hg concentrations were observed for ATP-d (>99%), GIF (95%), MGI+S (94%), and Cu+S (90%). Treatment of Hg was less effective using ATP (29%), ATP-a (69%), and GAC (78%). Extended X-ray absorption fine structure (EXAFS) spectra of Hg on GIF, MGI+S, and GAC indicated the presence of an Hg-O bond at 2.04-2.07 Å, suggesting that Hg was bound to GIF corrosion products or to oxygen complexes associated with water sorbed to activated carbon. In contrast, bond lengths ranging from 2.35 to 2.48 Å were observed for Hg in Cu+S, ATP-a, and ATP-d treatments, suggesting the formation of Hg-S bonds.

Transport and attenuation of metal(loid)s in mine tailings amended with organic carbon: Column experiments.

A laboratory-scale column experiment was conducted to evaluate the effect of organic carbon amendments on the mobility of As, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Tl and Zn in mine tailings. Three columns were packed with sulfide- and carbonate-rich tailings, which were amended with a 1:1 (vol.) mixture of peat and spent brewing grain at proportions of 0, 2 and 5vol.%. A simulated input solution characterized by circumneutral pH and elevated concentrations of SO(4) and S(2)O(3) was passed through the columns for 540 days. The input solution contained low concentrations of metal(loid)s during the initial 300 days and elevated concentrations thereafter. Decreases in mass transport of S(2)O(3) were observed in all columns; with increased attenuation observed at 5 vol. % organic carbon content. Removal of Mn, Ni, Cu, Sb and Mo was observed in all columns during the initial 300 days. However, during this time, mobilization of Fe, As, Zn and Pb was observed, with the greatest increases in concentration observed at the higher organic carbon content. During the final 240 days, S(2)O(3) removal was enhanced in columns containing organic carbon, and Fe, Mn, Ni, Tl, As and Sb removal also was observed. This study demonstrates the influence of organic carbon amendments on metal(loid) mobility in mine tailings. Decreases in mass discharge of metal(loid)s may be achieved using this technique; however, site-specific geochemical conditions must be considered before field-scale implementation.

Managing pore-water quality in mine tailings by inducing microbial sulfate reduction.

A field-scale experiment was conducted to evaluate the potential for inducing microbial sulfate reduction as a passive in situ technique for managing water quality in mine tailings deposits. Sulfide- and carbonate-rich minetailings, characterized by near-neutral pH pore water, were amended with < 1 dry wt. % organic carbon. The geochemical evolution of pore water was monitored for four years. The results demonstrate that organic carbon supported dissimilatory sulfate reduction (DSR) in the vadose zone. Decreases in dissolved SO4 and S2O3 were accompanied by H2S production, increased populations of sulfate-reducing bacteria (SRB), 34S-SO4 enrichment, and undersaturation of pore water with respect to gypsum [CaSO4 x 2H2O]. The mass of dissolved S decreased by > 45% during the monitoring period, which coincided with the removal of Zn, Sb, and Tl. Mobilization of Fe and As occurred initially; however, subsequent decreases in aqueous concentrations were observed. Mineralogical investigation confirmed the presence of secondary Fe-S and Zn-Fe-S phases. Amendment of tailings with a small and dispersed mass of organic carbon resulted in a general decrease in mass transport of sulfide oxidation products.