Carbon-metal versus metal-metal synergistic mechanism of ethylene electro-oxidation via electrolysis of water on TM2N6 sites in graphene.

Acetaldehyde (AA) and ethylene oxide (EO) are important fine chemicals, and are also substrates with wide applications for high-value chemical products. Direct electrocatalytic oxidation of ethylene to AA and EO can avoid the untoward effects from harmful byproducts and high energy emissions. The most central intermediate state is the co-adsorption and coupling of ethylene and active oxygen intermediates (*O) at the active site(s), which is restricted by two factors: the stability of the *O intermediate generated during the electrolysis of water on the active site at a certain applied potential and pH range; and the lower kinetic energy barriers of the oxidation process based on the thermo-migration barrier from the *O intermediate to produce AA/EO. The benefit of two adjacent active atoms is more promising, since diverse adsorption and flexible catalytic sites may be provided for elementary reaction steps. Motivated by this strategy, we explored the feasibility of various homonuclear TM2N6@graphenes with dual-atomic-site catalysts (DASCs) for ethylene electro-oxidation through first-principles calculations via thermodynamic evaluation, analysis of the surface Pourbaix diagram, and kinetic evaluation. Two reaction mechanisms through C-TM versus TM-TM synergism were determined. Between them, a TM-TM mechanism on 4 TM2N6@graphenes and a C-TM mechanism on 5 TM2N6@graphenes are built. All 5 TM2N6@graphenes through the C-TM mechanism exhibit lower kinetic energy barriers for AA and EO generation than the 4 TM2N6@graphenes through the TM-TM mechanism. In particular, Pd2N6@graphene exhibits the most excellent catalytic activity, with energy barriers for generating AA and EO of only 0.02 and 0.65 eV at an applied potential of 1.77 V vs. RHE for the generation of an active oxygen intermediate. Electronic structure analysis indicates that the intrinsic C-TM mechanism is more advantageous than the TM-TM mechanism for ethylene electro-oxidation, and this study also provides valuable clues for further experimental exploration.

Adverse effect of TWPs on soil fungi and the contribution of benzothiazole rubber additives.

Tire wear particles (TWPs) pollution is widely present in soil, especially in areas severely affected by traffic. Herein, regular variation of fungal biomass with TWPs was found in soils with different distances from the highway. In addition, the concentrations of benzothiazole compounds (BTHs), an important class of rubber vulcanization accelerators, were found to be positively correlated to the TWPs abundance. Sixty days' soil microcosm experiments were conducted to further confirm the adverse effect of TWPs and BTHs on soil fungi. TWPs spiking at 1000 mg/kg, a detectable level in the roadside, resulted in significant reduction of biomass and significant changes of soil fungal community structure, with Eurotium and Polyporales being the sensitive species. BTH+ 2-hydroxybenzothiazole (OHBT) (the dominant BTHs in soil) spiking at 200 ng/kg, the dose equivalent to 1000 mg/kg TWPs pollution, also caused a similar magnitude of soil fungal biomass reduction. Adonis demonstrated no significant difference of fungal community structure between TWPs and BTH+OHBT spiked soil, suggesting the adverse effect of TWPs on soil fungi may be explained by the act of BTHs. Pure culture using the representative soil fungi Eurotium and Polyporales also confirmed that BTHs were the main contributors to the adverse effect of TWPs on soil fungi.

Cd2+ enhancing the bromination of bisphenol A in Brassica chinensis L.: Pathways and mechanisms.

Traditional heavy metal pollution, such as cadmium, impacts the transformation and risks of bisphenol pollutants (like bisphenol A, BPA), in plants, especially due to the ubiquitous presence of bromide ion. Although it has been discovered that the bromination of phenolic pollutants occurs in plants, thereby increasing the associated risks, the influence and mechanisms of bromination under complex contamination conditions involving both heavy metals and phenolic compounds remain poorly understood. This study addresses the issue by exposing Brassica chinensis L. to cadmium ion (Cd2+, 25-100 µM), with the hydroponic solution containing BPA (15 mg/L) and bromide ion (0.5 mM) in this work. It was observed that Cd2+ primarily enhanced the bromination of BPA by elevating the levels of reactive oxygen species (ROS) and the activity of peroxidase (POD) in Brassica chinensis L. The variety of bromination products within Brassica chinensis L. increased as the concentration of Cd2+ rose from 25 to 100 µM. The substitution positions of bromine were determined using Gaussian calculations and mass spectrometry analysis. The toxicity of bromination products derived from BPA was observed to increase based on Ecological Structure-Activity Relationships analysis and HepG2 cytotoxicity assays. This study provides new insights into the risks and health hazards associated with cadmium pollution, particularly its role in enhancing the bromination of bisphenol pollutants in plants.

Effect of Glycolipids Application Combined with Nitrogen Fertilizer Reduction on Maize Nitrogen Use Efficiency and Yield.

Microbial-driven N turnover is important in regulating N fertilizer use efficiency through the secretion of metabolites like glycolipids. Currently, our understanding of the potential of glycolipids to partially reduce N fertilizer use and the effects of glycolipids on crop yield and N use efficiency is still limited. Here, a three-year in situ field experiment was conducted with seven treatments: no fertilization (CK); chemical N, phosphorus and potassium (NPK); NPK plus glycolipids (N+PKT); and PK plus glycolipids with 10% (0.9 N+PKT), 20% (0.8 N+PKT), 30% (0.7 N+PKT), and 100% (PKT) N reduction. Compared with NPK, glycolipids with 0-20% N reduction did not significantly reduce maize yields, and also increased N uptake by 6.26-11.07%, but no significant changes in grain or straw N uptake. The N resorption efficiency under 0.9 N+PKT was significantly greater than that under NPK, while the apparent utilization rates of N fertilizer and partial factor productivity of N under 0.9 N+PKT were significantly greater than those under NPK. Although 0.9 N+PKT led to additional labor and input costs, compared with NPK, it had a greater net economic benefit. Our study demonstrates the potential for using glycolipids in agroecosystem management and provides theoretical support for optimizing fertilization strategies.

Biochar alters the selectivity of MnFe2O4-activated periodate process through serving as the electron-transfer mediator.

Constructing green and sustainable advanced oxidation processes (AOPs) for the degradation of organic contaminants is of great importance but still remains big challenge. In this work, an effective AOP (MnFe2O4-activated periodate, MnFe2O4/PI) was established and investigated for the oxidation of organic contaminants. To avoid the severe aggregation of MnFe2O4 nanoparticles, a hybrid MnFe2O4-biochar catalyst (MnFe2O4-BC) was further synthesized by anchoring MnFe2O4 nanoparticles on chemically inert biochar substrate. Intriguingly, MnFe2O4-BC/PI exhibited different selectivity towards organic contaminants compared with MnFe2O4/PI, revealing that biochar not only served as the substrate, but also directly participated into the oxidation process. Electron-transfer mechanism was comprehensively elucidated to be responsible for the abatement of pollutants in both MnFe2O4/PI and MnFe2O4-BC/PI. The surface oxygen vacancies (OVs) of MnFe2O4 were identified as the active sites for the formation of high potential complexes MnFe2O4-PI*, which could directly and indirectly degrade the organic pollutants. For the hybrid MnFe2O4-BC catalyst, biochar played multiple roles: (i) substrate, (ii) provided massive adsorption sites, (iii) electron-transfer mediator. The differences in selectivity of MnFe2O4/PI and MnFe2O4-BC/PI were determined by the adsorption affinity between biochar substrate and organics. Overall, the findings of this study expand the knowledge on the selectivity of PI-triggered AOPs.

A fresh perspective on dissociation mechanism of cellulose in DMAc/LiCl system based on Li bond theory.

In this case, various characterization technologies have been employed to probe dissociation mechanism of cellulose in N,N-dimethylacetamide/lithium chloride (DMAc/LiCl) system. These results indicate that coordination of DMAc ligands to the Li+-Cl- ion pair results in the formation of a series of Lix(DMAc)yClz (x = 1, 2; y = 1, 2, 3, 4; z = 1, 2) complexes. Analysis of interaction between DMAc ligand and Li center indicate that Li bond plays a major role for the formation of these Lix(DMAc)yClz complexes. And the saturation and directionality of Li bond in these Lix(DMAc)yClz complexes are found to be a tetrahedral structure. The hydrogen bonds between two cellulose chains could be broken at the nonreduced end of cellulose molecule via combined effects of basicity of Cl- ion and steric hindrance of [Li (DMAc)4]+ unit. The unique feature of Li bond in Lix(DMAc)yClz complexes is a key factor in determination of the dissociation mechanism.

Influencing mechanisms of microplastics existence on soil heavy metals accumulated by plants.

Microplastics (MPs) and heavy metals often coexist in soil, drawing significant attention to their interactions and the potential risks of biological accumulation in the soil-plant system. This paper comprehensively reviews the factors and biochemical mechanisms that influence the uptake of heavy metals by plants, in the existence of MPs, spanning from rhizospheric soil to the processes of root absorption and transport. The paper begins by introducing the origins and current situation of soil contamination with both heavy metals and MPs. It then discusses how MPs alter the physicochemical properties of rhizospheric soil, with a focus on parameters that affect the bioavailability of heavy metals such as aggregates, pH, Eh, and soil organic carbon (SOC). The paper also examines the effect of this pollution on soil organisms and plant growth and reviews the mechanisms by which MPs affect the bioavailability and movement-transformation of heavy metals in rhizospheric soil. This examination emphasizes the roles of rhizospheric microbes, soil fauna, and root physiological metabolism. Finally, the paper outlines the research progress on the mechanisms by which MPs influence the uptake and transport of heavy metals by plant roots. Through this comprehensive review, this paper provides aims to provide environmental managers with a detailed understanding of the potential impact of the coexistence of MPs and heavy metals on the soil-plant ecosystem.

Revealing the Development Patterns of the Mandibular Glands of Apis mellifera carnica Based on Transcriptomics and Morphology.

The mandibular gland in worker bees synthesizes and secretes the organic acids present in royal jelly, and its development directly affects yield and quality. Therefore, we aimed to analyze the differences in morphology and gene expression in the mandibular glands of Apis mellifera carnica worker bees of different ages (3, 6, 9, 12, and 16 d). We dissected their mandibular glands and performed morphological and transcriptomic analyses to investigate the development of the mandibular gland and the molecular regulatory mechanisms involved in royal jelly secretion. Microscopy revealed that mandibular gland development is likely completed in the early stages. There were no significant differences in the structural morphology or organelles involved in the secretion of royal jelly at different ages. Transcriptomics revealed a total of 1554 differentially expressed genes, which were mainly involved in fat metabolism, lipid transport, and energy metabolism. The extracellular matrix-receptor interaction pathway was significantly enriched and contributed to the royal jelly secretion process. These results elucidate the genetic basis of the role of the mandibular gland in royal jelly secretion in A. mellifera and provide a reference for the genetic improvement of bees with high royal jelly production in the future.

Microplastics release from face masks: Characteristics, influential factors, and potential risks.

Since the COVID-19 pandemic, face masks have been used popularly and disposed of improperly, leading to the generation of a large amount of microplastics. The objective of this review is to provide a comprehensive insight into the characteristics of mask-derived microplastics, the influential factors of microplastics release, and the potential risks of these microplastics to the environment and organisms. Mask-derived microplastics were predominantly transparent fibers, with a length of <1 mm. The release of microplastics from masks is mainly influenced by mask types, use habits, and weathering conditions. Under the same conditions, surgical masks release more microplastics than other types of masks. Long-term wearing of masks and the disinfection for reuse can promote the release of microplastics. Environmental media, UV irradiation, temperature, pH value, and mechanical shear can also influence the microplastics release. The risks of mask-derived microplastics to human health via inhalation cannot be neglected. Future studies should pay more attention to the release of microplastics from the masks with alternative materials and under more weathering conditions.

Mechanisms of low cadmium accumulation in crops: A comprehensive overview from rhizosphere soil to edible parts.

Cadmium (Cd) is a toxic heavy metal often found in soil and agricultural products. Due to its high mobility, Cd poses a significant health risk when absorbed by crops, a crucial component of the human diet. This absorption primarily occurs through roots and leaves, leading to Cd accumulation in edible parts of the plant. Our research aimed to understand the mechanisms behind the reduced Cd accumulation in certain crop cultivars through an extensive review of the literature. Crops employ various strategies to limit Cd influx from the soil, including rhizosphere microbial fixation and altering root cell metabolism. Additional mechanisms include membrane efflux, specific transport, chelation, and detoxification, facilitated by metalloproteins such as the natural resistance-associated macrophage protein (Nramp) family, heavy metal P-type ATPases (HMA), zinc-iron permease (ZIP), and ATP-binding cassette (ABC) transporters. This paper synthesizes differences in Cd accumulation among plant varieties, presents methods for identifying cultivars with low Cd accumulation, and explores the unique molecular biology of Cd accumulation. Overall, this review provides a comprehensive resource for managing agricultural lands with lower contamination levels and supports the development of crops engineered to accumulate minimal amounts of Cd.

Source apportionment of microplastics in indoor dust: Two strategies based on shape and composition.

Microplastic (MP) pollution is widely distributed in the environment. However, methods for source apportionment of MPs are still lacking. In this study, the shape and size of 102,860 MPs in indoor dust from 39 cities of China were analyzed by laser direct infrared, and accordingly, a shape index (fshape) based on MP's aspect ratio was developed to assess the contribution of textiles release. In addition, a composition index (fcomp) based on the ratio of the mass concentration of polyethylene terephthalate (PET) to polyamide (PA), which were detected by liquid chromatography-tandem mass spectrometry, was proposed. The contribution of textile source and non-textile source to the indoor MPs were also estimated based on fcomp. It is estimated by fshape that 43% of MPs in indoor dust was released from textiles. Among the most abundant MPs in indoor dust, 98% of polyurethane, 94% of PA and 92% of PET come from the textile source, 76% of polypropylene and almost all of polyethylene come from the non-textile source. fcomp indicates that 83% of PET MPs comes from textile source, i.e., polyester. Considering the application proportion of PET in textile and non-textile industry, it is estimated that 59% of MPs in indoor dust comes from textile source, which is similar to the result obtained by fshape.

Dynamic Weighting Network for Person Re-Identification.

Recently, hybrid Convolution-Transformer architectures have become popular due to their ability to capture both local and global image features and the advantage of lower computational cost over pure Transformer models. However, directly embedding a Transformer can result in the loss of convolution-based features, particularly fine-grained features. Therefore, using these architectures as the backbone of a re-identification task is not an effective approach. To address this challenge, we propose a feature fusion gate unit that dynamically adjusts the ratio of local and global features. The feature fusion gate unit fuses the convolution and self-attentive branches of the network with dynamic parameters based on the input information. This unit can be integrated into different layers or multiple residual blocks, which will have varying effects on the accuracy of the model. Using feature fusion gate units, we propose a simple and portable model called the dynamic weighting network or DWNet, which supports two backbones, ResNet and OSNet, called DWNet-R and DWNet-O, respectively. DWNet significantly improves re-identification performance over the original baseline, while maintaining reasonable computational consumption and number of parameters. Finally, our DWNet-R achieves an mAP of 87.53%, 79.18%, 50.03%, on the Market1501, DukeMTMC-reID, and MSMT17 datasets. Our DWNet-O achieves an mAP of 86.83%, 78.68%, 55.66%, on the Market1501, DukeMTMC-reID, and MSMT17 datasets.

Low concentration of bromide ions improves sulfadiazine phytoremoval and attenuates its phytotoxicity.

Sulfonamide antibiotics (SAs) are ubiquitous in surface water and soil environments, raising considerable concerns about their risk and removal. However, the impacts of various bromide ion (Br-) concentrations on the phytotoxicity, uptake and fate of SAs in plant growth and physiological metabolism of plants have not been well understood. Our research demonstrated that low concentrations of Br- (0.1, 0.5 mM) promoted the uptake and degradation of sulfadiazine (SDZ) in wheat and attenuated the phytotoxicity of SDZ. Additionally, we proposed a degradation pathway and identified the brominated product of SDZ (SDZBr), which attenuated the dihydrofolate synthesis inhibition by SDZ. The primary mechanism was that Br- reduced the level of reactive oxygen radicals (ROS) and alleviated oxidative damage. The production of SDZBr and the high consumption of H2O2 suggest the potential generation of reactive bromine species, contributing to the degradation of the electron-rich SDZ and thus reducing its toxicity. Moreover, metabolome analysis of wheat roots indicated that low concentrations of Br- stimulated the production of indoleacetic acid under SDZ stress, promoting growth and enhancing the uptake and degradation of SDZ. Conversely, high Br- (1 mM) concentration produced a deleterious effect. These findings provide valuable insights into the mechanisms of antibiotic removal, suggesting a potentially novel approach to plant-based antibiotic remediation.

Combined effects of microplastics and excess boron on Microcystis aeruginosa.

Both microplastics (MPs) and excess boron (B) have adverse effects on microalgae. However, the combined toxic effects of MPs and excess B on microalgae have not been studied. The aim of this study was to investigate the combined effects of excess B and three types of surface-modified microplastics, including plain polystyrene (PS-Plain), amino-modified polystyrene (PS-NH2), and carboxyl-modified polystyrene (PS-COOH), on chlorophyll a content, oxidative damage, photosynthetic activity and microcystin (MC) production in Microcystis aeruginosa. The results showed that PS-NH2 inhibited the growth of M. aeruginosa, with the maximum inhibition rate of 18.84 %, while PS-COOH and PS-Plain showed stimulatory effects with the maximum inhibition rates of -2.56 % and - 8.03 % respectively. PS-NH2 aggravated the inhibition effects of B, while PS-COOH and PS-Plain alleviated the inhibition effects. Furthermore, the combined exposure of PS-NH2 and excess B had a much greater effect on oxidative damage, cell structure, and production of MCs in algal cells than the combined effects of PS-COOH and PS-Plain. The charges on microplastics affected both B adsorption on microplastics and the aggregation of microplastics with algal cells, indicating that the charge on microplastics is a dominant factor influencing the combined effects of microplastics and excess B on microalgae. Our findings can provide direct evidence for the combined effects of microplastics and B on freshwater algae and improve the understanding of the potential risks of microplastics in aquatic ecosystems.

Prediction of microplastic abundance in surface water of the ocean and influencing factors based on ensemble learning.

Microplastics are regarded as emergent contaminants posing a serious threat to the marine ecosystem. It is time-consuming and labor-intensive to determine the number of microplastics in different seas using traditional sampling and detection methods. Machine learning can provide a promising tool for prediction, but there is a lack of research on this. To screen high-performance models for the prediction of microplastic abundance in the marine surface water and explore the influencing factors, three ensemble learning models, random forest (RF), gradient boosted decision tree (GBDT), and extreme gradient boosting (XGBoost), were developed and compared. A total of 1169 samples were collected, and multi-classification prediction models were constructed with 16 features of the data as inputs and six classes of microplastic abundance intervals as outputs. Our results show that the XGBoost model has the best performance of prediction, with a total accuracy rate of 0.719 and an ROC AUC (Receiver Operating Characteristic curve, Area Under Curve) value of 0.914. Seawater phosphate (PHOS) and seawater temperature (TEMP) have negative effects on the abundance of microplastics in surface seawater, while the distance between the sampling point and the coast (DIS), wind stress (WS), human development index (HDI), and sampling latitude (LAT) have positive effects. This work not only predicts the abundance of microplastics in different seas but also offers a framework for the use of machine learning in the study of marine microplastics.

Two tests of peripheral blood by standard methods were negative for Von Hippel-Lindau mutations: A case report.

BACKGROUND: Von Hippel-Lindau disease (VHL) is an autosomal dominant, inherited syndrome with variants in the VHL gene causing predisposition to multi-organ benign and malignant neoplasms. Approximately 95-100% of individuals with clinical VHL receive a positive result when they undergo standard genetic testing on DNA extracted from blood. Here, we present the case of an individual with a clinical diagnosis of VHL disease where peripheral blood DNA analysis did not detect a VHL variant. CASE PRESENTATION: Our patient is a-38-year-old male whose chief complaints are right shoulder and back pain for almost a year. Cranial Magnetic Resonance Imaging (MRI) showed multiple space occupying lesions in cerebellar hemisphere. Spine MRI showed the formation of intraspinal cavities in cervical 5 to thoracic 10 plane, enhanced lesions in the thoracic 8 vertebral plane. Abdominal MRI showed very weakly enhanced nodules on the left kidney and multiple cystic lesions of pancreas. Our case, without a family history, fulfilled clinical criteria for VHL but initially received negative germline VHL results through multigene panel testing on DNA extracted from peripheral blood leukocytes. One year later, the second peripheral blood send for germline molecular genetic testing was also negative. CONCLUSION: Although the patient tested negative for the classic VHL gene, the possibility of somatic mosaicism could not be ruled out. Instead of repeating classic testing, next-generation sequencing, multi-tissue analysis or/and genetic testing of offspring is an efficient tool to identify VHL mosaic mutation.

Glyoxylate cycle maintains the metabolic homeostasis of Pseudomonas aeruginosa in viable but nonculturable state induced by chlorine stress.

Bacteria enter a viable but non-culturable (VBNC) state with low metabolic activity to cope with environmental stress (e.g., chlorine disinfection). Elucidating the mechanism and key pathway of VBNC bacteria maintaining low metabolic competence is of great significance to realize their effective control and reduce their environmental and health risks. This study discovered that the glyoxylate cycle is a key metabolic pathway for VBNC bacteria, but not for culturable bacteria. And blocking the glyoxylate cycle pathway inhibited the reactivation and led to the death of VBNC bacteria. The main mechanisms involved the breakdown of material and energy metabolism and the antioxidant system. Gas chromatography-tandem mass spectrometry analysis showed that blocking the glyoxylate cycle led to a disruption of carbohydrate metabolism and fatty acid catabolism in VBNC bacteria. As a result, the energy metabolism system of VBNC bacteria collapsed and the abundance of energy metabolites (ATP, NAD+ and NADP+) decreased significantly. Moreover, the decrease in the level of quorum sensing signaling molecules (quinolinone and N-Butanoyl-D-homoserine lactone) inhibited the synthesis of extracellular polymeric substances (EPSs) and biofilm formation. And the downregulation of glycerophospholipid metabolic competence increased the permeability of cell membranes, leading to the entry of large amounts of hypochlorous acid (HClO) into the bacteria. In addition, the down-regulation of nucleotide metabolism, glutathione metabolism, and the reduction of antioxidant enzyme content resulted in the inability to scavenge reactive oxygen species (ROS) generated by chlorine stress. The large production of ROS and the reduction of antioxidants together led to the breakdown of the antioxidant system of VBNC bacteria. In short, the glyoxylate cycle is the key metabolism pathway of VBNC bacteria for stress resistance and maintaining cellular metabolic balance, and targeting the glyoxylate cycle represents an attractive strategy for developing new and efficient disinfection methods for the control of VBNC bacteria.

Systematical analysis of sludge treatment and disposal technologies for carbon footprint reduction.

This study aims to comprehensively analyze the Greenhouse Gases (GHGs) emissions from current sewage sludge treatment and disposal technologies (building material, landfill, land spreading, anaerobic digestion, and thermochemical processes) based on the database of Science Citation Index (SCI) and Social Science Citation Index (SSCI) from 1998 to 2020. The general patterns, spatial distribution, and hotspots were provided by bibliometric analysis. A comparative quantitative analysis based on life cycle assessment (LCA) put forward the current emission situation and the key influencing factors of different technologies. The effective GHG emissions reduction methods were proposed to mitigate climate change. Results showed that incineration or building materials manufacturing of highly dewatered sludge, and land spreading after anaerobic digestion have the best GHG emissions reduction benefits. Biological treatment technologies and thermochemical processes have great potential for reducing GHGs. Enhancement of pretreatment effect, co-digestion, and new technologies (e.g., injection of carbon dioxide, directional acidification) are major approaches to facilitate substitution emissions in sludge anaerobic digestion. The relationship between the quality and efficiency of secondary energy in thermochemical process and GHGs emission still needs further study. Solid sludge products generated by bio-stabilization or thermochemical processes are considered to have a certain carbon sequestration value and can improve the soil environment to control GHG emissions. The findings are useful for future development and processes selection of sludge treatment and disposal facing carbon footprint reduction.

Evaluation of the disinfection effect and mechanism of SO4•- and HO• UV/persulfate salts.

Although ultraviolet (UV) and persulfate (PS) have been widely used in water disinfection process, their incompleteness of disinfection, such as inducing the production of viable but non-culturable cells (VBNC), has attracted extensive attention. In this study, the disinfection effect of combined UV and PS was evaluated, and the roles of SO4•- and HO• radicals in UV/PS disinfection were also analyzed. UV/PS more effectively inactivated cells and reduced the number of culturable cells. Also, the test of bacterial dark activation suggested that UV/PS disinfection inhibited the recovery of VBNC bacteria. The mechanisms of UV/PS disinfection were the increase of membrane permeability and oxidative stress, where SO4•- radicals played more role than HO• radicals. Furthermore, UV/PS disinfection more significantly perturbed the metabolism of Pseudomonas aeruginosa (p < 0.05), mainly involving glyoxylate and dicarboxylic acid metabolism, aminoacyl-tRNA biosynthesis, Alanine, aspartate and glutamate metabolism, and citric acid cycle (TCA cycle). In short, UV/PS disinfection can not only significantly reduce the number of culturable bacteria (kill bacteria) but also inhibits the recovery of VBNC bacteria.

Oxidative potential of heavy-metal contaminated soil reflects its ecological risk on earthworm.

The ecological risk of heavy metal-contaminated soil is usually evaluated by its oxidative stress on terrestrial animals, which are vulnerable to the impact of individual differences of animals and environmental conditions. Oxidative potential (OP) is the potential of particles to induce the formation of reactive oxygen species (ROS). In this study, OP of the in situ contaminated soils collected from an industrial site (i.e., 64.5-7783 mg/kg of Cu, 54.9-397 mg/kg of Pb, 278-2085 mg/kg of Zn and 0.615-121 mg/kg of Cd) were measured as 38.0-60.1 pmol/min/mg, and the water extractable Cu, Pb, Zn, and Cd in soils have been proved to contribute 89%-98% to OP. Oxidative stress in earthworms (Eisenia fetida) caused by the industrial contaminated soils can be reflected by the biomarkers such as 8-hydroxy-2'-deoxyguanosine, metallothionein, and antioxidant enzymes, and a negative correlation presents between the comprehensive biomarker response index and the OP of soils (r = -0.979, p < 0.01). This is the first time to propose a dose-response relationship between OP and oxidative stress. Metabolomic analysis also verified that the regulation of four ROS-related metabolites (i.e., l-pipecolate, 1-methylhistidine, 5-methoxytryptamine, and xanthosine) in earthworms treated with contaminated soil were directly correlated with OP values. These results indicate that OP can be used as an indicator for ecological risk assessment of heavy metal-contaminated soil, which provides a fast, stable and easily testable chemical method.