Probing structural superlubricity of two-dimensional water transport with atomic resolution.

Low-dimensional water transport can be drastically enhanced under atomic-scale confinement. However, its microscopic origin is still under debate. In this work, we directly imaged the atomic structure and transport of two-dimensional water islands on graphene and hexagonal boron nitride surfaces using qPlus-based atomic force microscopy. The lattice of the water island was incommensurate with the graphene surface but commensurate with the boron nitride surface owing to different surface electrostatics. The area-normalized static friction on the graphene diminished as the island area was increased by a power of ~-0.58, suggesting superlubricity behavior. By contrast, the friction on the boron nitride appeared insensitive to the area. Molecular dynamic simulations further showed that the friction coefficient of the water islands on the graphene could reduce to <0.01.

Identification of Human Body Fluid Stains and Non-Biological Stains by Three-Dimensional Fluorescence Spectroscopy.

OBJECTIVES: To establish a rapid and nondestructive identification method for human body fluid stains and non-biological stains using three-dimensional fluorescence spectroscopy. METHODS: The collected three-dimensional fluorescence spectrum data of human saliva, 3% blood, coffee and Fanta® stains were processed with dimensionality reduction. After wavelet transform, spectral denoising and feature extraction, the classification formula was established. The Fisher discriminant was used for spectrum matching and recognition to establish the analysis method to distinguish stain types. RESULTS: According to the results of data training and comparison, all the recognition accuracies of Fanta®, coffee, saliva and blood were more than 91.39%. Among them, saliva reached 100% recognition accuracy. CONCLUSIONS: Three-dimensional fluorescence spectroscopy is a potential method for rapid and nondestructive identification of biological and non-biological stains.

Application of transcriptome in time analysis and donor characterization in blood samples.

As an effective supplement to the current forensic DNA typing and one of the research hotpots in forensic science, the in-depth mining and characterization of biological evidence can provide rich and reliable clues for case investigation. In this study, the time-dependent variations of transcriptome were confirmed in in vitro blood samples within 0-168 days and a random forest model was established to realize the classification of blood samples with different TSD (time since deposition). Meanwhile, significant differences were observed in the transcripts of blood samples with different smoking habits and genders within a certain time period. HLA-DRB1, HLA-DQB1 and HLA-DQA2 were identified as markers for smoking habit identification, while the transcripts for RPS4Y1 and EIF1AY from the non-recombining region of the Y chromosome (NRY) were identified as markers for male sex identification. Thus, this study provides a theoretical foundation and experimental strategy for establishing a transcriptome-based method for characterizing blood sample retention time and donor characteristics in the field of forensic investigation.

Synthesis of ß-Deuterated Amino Acids via Palladium-Catalyzed H/D Exchange.

Despite several synthetic approaches that have been developed for α-deuterated amino acids, the synthesis of ß-deuterated amino acids has remained a challenge. Herein, we disclose a palladium catalyzed H/D exchange protocol for a ß-deuterated N-protected amino amide, which can be converted to a ß-deuterated amino acid simply by removal of protecting groups. This protocol is highly efficient, simply manipulated, and appliable for deuterium-labeling of many amino amides. In addition, deuterium labeling of phenylalanine derivatives was also successful when pivalic acid served as an additive to promote the H/D exchange process.

Silver salt enabled H/D exchange at the ß-position of thiophene rings: synthesis of fully deuterated thiophene derivatives.

We disclose a silver catalyzed H/D exchange reaction, which can introduce the deuterium atom at the ß position of thiophene rings without the assistance of any coordinating groups. The advantages of this reaction include operation in open air, usage of D2O as the deuterium source, good tolerance to a range of functional groups and obtaining high atom% deuterium incorporation. In addition, this H/D exchange reaction is employed for direct deuteration of a thiophene based monomer, which is usually prepared by multistep synthesis from expensive deuterated starting materials.

C-H Bond Functionalization of (Hetero)aryl Bromide Enabled Synthesis of Brominated Biaryl Compounds.

Aryl bromide is one of the most important compounds in organic chemistry, because it is widely used as synthetic building blocks enabling quick access to a wide array of bioactive molecules, organic materials, and polymers via the versatile cutting-edge transformations of C-Br bond. Direct C-H bond functionalization of aryl bromide is considered to be an efficient way to prepare functionalized aryl bromides; however, it is rarely explored possibly due to the relatively low reactivity of aryl bromide toward C-H bond activation. We herein report a palladium-catalyzed coupling reaction between aryl iodide and aryl bromide for preparing brominated biaryl compounds via a silver-mediated C-H bond activation pathway.

Synthesis of Multideuterated (Hetero)aryl Bromides by Ag(I)-Catalyzed H/D Exchange.

Deterium-labeled (hetero)aryl bromide is one of the most widespread applicable motifs to achieve important deuterated architectures for various scientific applications. Traditionally, these deterium-labeled (hetero)aryl bromides are commonly prepared via multistep syntheses. Herein, we disclose a direct H/D exchange protocol for deuteration of (hetero)aryl bromides using Ag2CO3 as catalyst and D2O as deuterium source. This protocol is highly efficient, simply manipulated, and appliable for deuterium-labeling of over 55 (hetero)aryl bromides including bioactive druglike molecules and key intermediates of functional materials. In addition, this method showed distinguishing site-selectivity toward the existing transition-metal-catalyzed HIE process, leading to multideuterated (hetero)aryl bromides in one step.

Moiré Phonons in Twisted Bilayer MoS2.

The material choice, layer thickness, and twist angle widely enrich the family of van der Waals heterostructures (vdWHs), providing multiple degrees of freedom to engineer their optical and electronic properties. The moiré patterns in vdWHs create a periodic potential for electrons and excitons to yield many interesting phenomena, such as Hofstadter butterfly spectrum and moiré excitons. Here, in the as-grown/transferred twisted bilayer MoS2 (tBLMs), one of the simplest prototypes of vdWHs, we show that the periodic potentials of moiré patterns also modify the properties of phonons of its monolayer MoS2 constituent to generate Raman modes related to moiré phonons. These Raman modes correspond to zone-center phonons in tBLMs, which are folded from the off-center phonons in monolayer MoS2. However, the folded phonons related to crystallographic superlattices are not observed in the Raman spectra. By varying the twist angle, the moiré phonons of tBLM can be exploited to map the phonon dispersions of the monolayer constituent. The lattice dynamics of the moiré phonons are modulated by the patterned interlayer coupling resulting from periodic potential of moiré patterns, as confirmed by density functional theory calculations. The Raman intensity related to moiré phonons in all tBLMs are strongly enhanced when the excitation energy approaches the C exciton energy. This study can be extended to various vdWHs to deeply understand their Raman spectra, moiré phonons, lattice dynamics, excitonic effects, and interlayer coupling.

Unexpected fungal communities in the Rehai thermal springs of Tengchong influenced by abiotic factors.

Fungal communities represent an indispensable part of the geothermal spring ecosystem; however, studies on fungal community within hot springs are still scant. Here, we used Illumina HiSeq 2500 sequencing to detect fungal community diversity in extremely acidic hot springs (pH < 4) and neutral and alkaline springs (pH > 6) of Tengchong-indicated by the presence of over 0.75 million valid reads. These sequences were phylogenetically assigned to 5 fungal phyla, 67 order, and 375 genera, indicating unexpected fungal diversity in the hot springs. The genera such as Penicillium, Entyloma, and Cladosporium dominated the fungal community in the acidic geothermal springs, while the groups such as Penicillium, Engyodontium, and Schizophyllum controlled the fungal assemblages in the alkaline hot springs. The alpha-diversity indices and the abundant fungal taxa were significantly correlated with physicochemical factors of the hot springs particularly pH, temperature, and concentrations of Fe2+, NH4+, NO 2-, and S2-, suggesting that the diversity and distribution of fungal assemblages can be influenced by the complex environmental factors of hot springs.

Morphological and Transcriptomic Analysis Reveals the Osmoadaptive Response of Endophytic Fungus Aspergillus montevidensis ZYD4 to High Salt Stress.

Halophilic fungi have evolved unique osmoadaptive strategies, enabling them to thrive in hypersaline habitats. Here, we conduct morphological and transcriptomic response of endophytic fungus (Aspergillus montevidensis ZYD4) in both the presence and absence of salt stress. Under salt stress, the colony morphology of the A. montevidensis ZYD4 changed drastically and exhibited decreased colony pigmentation. Extensive conidiophores development was observed under salt stress; conidiophores rarely developed in the absence of salt stress. Under salt stress, yellow cleistothecium formation was inhibited, while glycerol and compatible sugars continued to accumulate. Among differentially expressed unigenes (DEGs), 733 of them were up-regulated while 1,619 unigenes were down-regulated. We discovered that genes involved in the accumulation of glycerol, the storage of compatible sugars, organic acids, pigment production, and asexual sporulation were differentially regulated under salt stress. These results provide further understanding of the molecular basis of osmoadaptive mechanisms of halophilic endophytic fungi.

Quantification of light-enhanced ionic transport in lead iodide perovskite thin films and its solar cell applications.

Ionic transport in organometal halide perovskites is of vital importance because it dominates anomalous phenomena in perovskite solar cells, from hysteresis to switchable photovoltaic effects. However, excited state ionic transport under illumination has remained elusive, although it is essential for understanding the unusual light-induced effects (light-induced self-poling, photo-induced halide segregation and slow photoconductivity response) in organometal halide perovskites for optoelectronic applications. Here, we quantitatively demonstrate light-enhanced ionic transport in CH3NH3PbI3 over a wide temperature range of 17-295 K, which reveals a reduction in ionic transport activation energy by approximately a factor of five (from 0.82 to 0.15 eV) under illumination. The pure ionic conductance is obtained by separating it from the electronic contribution in cryogenic galvanostatic and voltage-current measurements. On the basis of these findings, we design a novel light-assisted method of catalyzing ionic interdiffusion between CH3NH3I and PbI2 stacking layers in sequential deposition perovskite synthesis. X-ray diffraction patterns indicate a significant reduction of PbI2 residue in the optimized CH3NH3PbI3 thin film produced via light-assisted sequential deposition, and the resulting solar cell efficiency is increased by over 100% (7.5%-15.7%) with little PbI2 residue. This new method enables fine control of the reaction depth in perovskite synthesis and, in turn, supports light-enhanced ionic transport.

[The application of three methods combined for extracting DNA from human epithelium].

OBJECTIVE: To improve DNA extraction from human epithelium. METHODS: Chelex-100, Chelex-100 organic combined and Chelex-100 magnetism pearl combined methods were adopted according to the situation of each case. RESULTS: With the stepwise extracting protocol, the trace amount of DNA was analyzed most efficiently and the success rate of DNA extracting was better improved. CONCLUSION: The efficiency of DNA extraction from human epithelium could be greatly improved by modifying the extracting protocol such as purification and concentration based on previous results.