RESUMO
Biodegradable subacromial spacer implantation has become practicable for the treatment of irreparable rotator cuff tears (IRCT). However, the relative high degradation rate and inferior tissue regeneration properties of current subacromial spacer may lead to failure regards to long-term survival. It is reported that satisfactory clinical results lie in the surrounding extracellular matrix (ECM) deposition after implantation. This study aims to develop a biological subacromial spacer that would enhance tissue regeneration properties and results in better ECM deposition. Physicochemical properties were characterized on both poly-l-lactide-co-ε-caprolactone (PLCL) dip-coating spacer (monolayer spacer, MS) and PLCL dip-coating + Poly-l-Lactic Acid (PLLA)/Gelatin electrospun spacer (Bilayer Spacer, BS). Cytocompatibility, angiogenesis, and collagen inducibility were evaluated with tendon fibroblasts and endothelial cells. Ultrasonography and histomorphology were used to analyze biodegradability and surrounding ECM deposition after the implantation in vivo. BS was successfully fabricated with the dip-coating and electrospinning technique, based on the human humeral head data. In vitro studies demonstrated that BS showed a greater cytocompatibility, and increased secretion of ECM proteins comparing to MS. In vivo studies indicated that BS promoted ECM deposition and angiogenesis in the surrounding tissue. Our research highlights that BS exhibits better ECM deposition and reveals a potential candidate for the treatment of IRCT in future.
Assuntos
Lesões do Manguito Rotador , Humanos , Lesões do Manguito Rotador/tratamento farmacológico , Gelatina , Células Endoteliais , Matriz ExtracelularRESUMO
Failing to regenerate native tendon tissue in chronic massive rotator cuff tears (CMRCTs) results in high retear rates after surgery. Gelatin is a hydrolyzed form of collagen which is bioactive and biocompatible. This study intends to investigate the suitability of integrating gelatin to poly (l-lactic acid) (PLLA) fibrous membranes for promoting the healing of CMRCTs. PLLA/Gelatin electrospun membranes (PGEM) are fabricated using electrospinning technology. The fourier transform infrared, static contact angles are tested sequentially. Cytocompatibility is evaluated with rat tendon fibroblasts and human umbilical endothelial cells (HUEVCs) lines. CMRCTs rat models are established and assigned into three groups (the sham group, the repaired group, and the augmentation group) to perform histomorphological and biomechanical evaluations. Gelatin is successfully integrated into PLLA fibrous membranes by the electrospinning technique. In vitro studies indicate that PGEM shows a great cytocompatibility for rat tendon fibroblasts and HUEVCs. In vivo studies find that applications of PGEM significantly promote well-aligned collagen I fibers formation and enhance biomechanical properties of the repaired tendon in CMRCTs rat models. In summary, gelatin promotes tendon fibroblasts and HUEVCs adhesion, migration, and proliferation on the PLLA fibrous membranes, and PGEM may provide a great prospect for clinical application.
Assuntos
Lesões do Manguito Rotador , Animais , Células Endoteliais , Gelatina/farmacologia , Ratos , Regeneração , Lesões do Manguito Rotador/cirurgia , CicatrizaçãoRESUMO
Background: This study aims to design a 3D printed handheld electrospinning device and evaluate its effect on the rapid repair of mouse skin wounds. Methods: The device was developed by Solidworks and printed by Object 350 photosensitive resin printer. The polylactic acid (PLA)/gelatin blend was used as the raw material to fabricate in-situ degradable nanofiber scaffolds. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and water vapor permeability test were used to evaluate the material properties of the scaffolds; cytotoxicity test was performed to evaluate material/residual solvent toxicity, and in situ tissue repair experiments in Balb/c mouse were performed. Results: The 3D printed handheld electrospinning device successfully fabricates PLA/gelatin nanofibrous membrane with uniformly layered nanofibers and good biocompatibility. Animal experiments showed that the mice in the experimental group had complete skin repair. Conclusions: The 3D printed handheld device can achieve in situ repair of full-thickness defects in mouse skin.
RESUMO
Both of the long-term fidelity and cell viability of three-dimensional (3D)-bioprinted constructs are essential to precise soft tissue repair. However, the shrinking/swelling behavior of hydrogels brings about inadequate long-term fidelity of constructs, and bioinks containing excessive polymer are detrimental to cell viability. Here, we obtained a facile hydrogel by introducing 1% aldehyde hyaluronic acid (AHA) and 0.375% N-carboxymethyl chitosan (CMC), two polysaccharides with strong water absorption and water retention capacity, into classic gelatin (GEL, 5%)-alginate (ALG, 1%) ink. This GEL-ALG/CMC/AHA bioink possesses weak temperature dependence due to the Schiff base linkage of CMC/AHA and electrostatic interaction of CMC/ALG. We fabricated integrated constructs through traditional printing at room temperature and in vivo simulation printing at 37°C. The printed cell-laden constructs can maintain subaqueous fidelity for 30 days after being reinforced by 3% calcium chloride for only 20 s. Flow cytometry results showed that the cell viability was 91.38 ± 1.55% on day 29, and the cells in the proliferation plateau at this time still maintained their dynamic renewal with a DNA replication rate of 6.06 ± 1.24%. This work provides a convenient and practical bioink option for 3D bioprinting in precise soft tissue repair.
RESUMO
The ready-to-use, structure-supporting hydrogel bioink can shorten the time for ink preparation, ensure cell dispersion, and maintain the preset shape/microstructure without additional assistance during printing. Meanwhile, ink with high permeability might facilitate uniform cell growth in biological constructs, which is beneficial to homogeneous tissue repair. Unfortunately, current bioinks are hard to meet these requirements simultaneously in a simple way. Here, based on the fast dynamic crosslinking of aldehyde hyaluronic acid (AHA)/N-carboxymethyl chitosan (CMC) and the slow stable crosslinking of gelatin (GEL)/4-arm poly(ethylene glycol) succinimidyl glutarate (PEG-SG), we present a time-sharing structure-supporting (TSHSP) hydrogel bioink with high permeability, containing 1% AHA, 0.75% CMC, 1% GEL and 0.5% PEG-SG. The TSHSP hydrogel can facilitate printing with proper viscoelastic property and self-healing behavior. By crosslinking with 4% PEG-SG for only 3 min, the integrity of the cell-laden construct can last for 21 days due to the stable internal and external GEL/PEG-SG networks, and cells manifested long-term viability and spreading morphology. Nerve-like, muscle-like, and cartilage-like in vitro constructs exhibited homogeneous cell growth and remarkable biological specificities. This work provides not only a convenient and practical bioink for tissue engineering, targeted cell therapy, but also a new direction for hydrogel bioink development.
RESUMO
A glioma is a malignant tumor that severely threatens human health. However, it is difficult for most therapeutic agents to penetrate through the blood-brain barrier (BBB) and exhibit their antineoplastic activity in the brain. In this article, a biomimetic in vitro BBB model was created by a composite process, this model can provide a significant foundation for the research of drug transport, tumor treatment, tumor microenvironment and other fields. A series of tests and comparative experiments were performed to evaluate this model. The tests showed that the model enabled preliminary simulation of the structure and function of the BBB. Experimental results demonstrated: (1) the new technology enabled controlled release of growth factors and successfully induced endothelial progenitor cells into endothelial cells. Compared with the traditional gold standard, the Transwell model, the expression of four specific proteins that are related to the BBB characteristics was significantly increased (alkaline phosphatase(ALP) by 89.82%, γ-GT by 88.86%, zonula occludens-1 (ZO-1) by 57.40%, and Claudin-5 by 102.32%) in this model; (2) astrocytes had a promoting effect on the microvascular endothelial cells to form tight junction (ZO-1 increased by 249.35%, Claudin-5 increased by 184.99%), and there was a great difference between whether these two types of cells were contact cultured or not; (3) the gelatinous cell U118 had a destructive effect on the tight junction of BBB (ZO-1 decreased by 55.86%, Claudin-5 decreased by 37.84%).
Assuntos
Materiais Biomiméticos/farmacologia , Barreira Hematoencefálica/fisiologia , Modelos Biológicos , Engenharia Tecidual , Animais , Barreira Hematoencefálica/efeitos dos fármacos , Barreira Hematoencefálica/ultraestrutura , Linhagem Celular Tumoral , Forma Celular/efeitos dos fármacos , Preparações de Ação Retardada/farmacologia , Células Progenitoras Endoteliais/efeitos dos fármacos , Células Progenitoras Endoteliais/metabolismo , Humanos , Peptídeos e Proteínas de Sinalização Intercelular/farmacologia , RatosRESUMO
Three-dimensional (3D) printing of decellularized extracellular matrix (ECM) has been achieved to ensure real physiological environments for tissue engineering. However, the limited source, biocompatibility, and biosafety of decellularized ECM are deficiencies in its large clinical use. Autogenous ECM is biocompatible, bioactive, and biosafe, making it an optimal choice for future clinical applications of 3D printing. Here, we developed a multi-level customized 3D printing (MLC-3DP) strategy applying autogenous bone matrix (Auto-BM). This MLC-3DP includes shape specificity (shape), material specificity (Auto-BM), and cell specificity (autogenous cells) for true patient-specific repairs. Auto-BM (skull flaps) is readily accessible for specific patients after craniectomy, providing sufficient autogenous materials for MLC-3DP. Under mild conditions of this strategy, human-scale 3D printed samples can be fabricated using bioactive micron-sized Auto-BM particles. Multi-level customized autogenous bones (MLC-Auto-Bones) are finally obtained by combining autogenous bone marrow-derived mesenchymal stem cells (Auto-BMSCs). With autogenous materials and cells, MLC-Auto-Bones are inherently biocompatible and biosafe, providing good bioactivity for osteogenesis. In this implant, Auto-BMSCs can spontaneously differentiate into osteoblasts in vitro without additional osteogenic factors. In critical-sized skull defect models in vivo (3 months), implants integrate tightly to the defects' margin, facilitate mineralization, and generate vascularized mature bone. This work provides not only feasibility for patient-specific implants for skull defects, but also potential patient-specific solutions for other similar clinical requirements.
Assuntos
Implantes Experimentais , Impressão Tridimensional , Crânio/fisiologia , Engenharia Tecidual , Fosfatase Alcalina/metabolismo , Animais , Matriz Óssea/fisiologia , Regeneração Óssea , Diferenciação Celular , Células Cultivadas , Estudos de Viabilidade , Regulação da Expressão Gênica , Osteogênese/genética , Coelhos , Microtomografia por Raio-XRESUMO
Artificial blood vessels must be strong, flexible, and must not lead to blockage after implantation. It is therefore important to select an appropriate fabrication process for products to meet these requirements. This review discusses the current methods for making artificial blood vessels, focusing on fabrication principle, materials, and applications. Among these methods, 3D printing is very promising since it has the unique capability to make complicated three-dimensional structures with multiple types of materials, and can be completely digitalized. Therefore, new developments in 3D printing of artificial blood vessels are also summarized here. This review provides a reference for the fusion of multiple processes and further improvement of artificial blood vessel fabrication.
Assuntos
Vasos Sanguíneos , Modelos Cardiovasculares , Impressão Tridimensional , Engenharia Tecidual , Alicerces Teciduais , Vasos Sanguíneos/citologia , Vasos Sanguíneos/fisiologia , Células Cultivadas , Células Endoteliais da Veia Umbilical Humana , HumanosRESUMO
Three-dimensional (3D) bioprinting of living structures with cell-laden biomaterials has been achieved in vitro, however, some cell-cell interactions are limited by the existing hydrogel. To better mimic tumor microenvironment, self-assembled multicellular heterogeneous brain tumor fibers have been fabricated by a custom-made coaxial extrusion 3D bioprinting system, with high viability, proliferative activity and efficient tumor-stromal interactions. Therein, in order to further verify the sufficient interactions between tumor cells and stroma MSCs, CRE-LOXP switch gene system which contained GSCs transfected with "LOXP-STOP-LOXP-RFP" genes and MSCs transfected with "CRE recombinase" gene was used. Results showed that tumor-stroma cells interacted with each other and fused, the transcription of RFP was higher than that of 2D culture model and control group with cells mixed directly into alginate, respectively. RFP expression was observed only in the cell fibers but not in the control group under confocal microscope. In conclusion, coaxial 3D bioprinted multicellular self-assembled heterogeneous tumor tissue-like fibers provided preferable 3D models for studying tumor microenvironment in vitro, especially for tumor-stromal interactions.
Assuntos
Bioimpressão/métodos , Neoplasias Encefálicas/patologia , Regulação Neoplásica da Expressão Gênica , Organoides/patologia , Impressão Tridimensional/instrumentação , Engenharia Tecidual/métodos , Alicerces Teciduais , Alginatos/química , Bioimpressão/instrumentação , Neoplasias Encefálicas/genética , Neoplasias Encefálicas/metabolismo , Fusão Celular , Genes Reporter , Humanos , Hidrogéis/química , Integrases/genética , Integrases/metabolismo , Proteínas Luminescentes/genética , Proteínas Luminescentes/metabolismo , Células-Tronco Mesenquimais , Organoides/metabolismo , Células Tumorais Cultivadas , Microambiente Tumoral , Proteína Vermelha FluorescenteRESUMO
A vital challenge in complex organ manufacturing is to vascularize large combined tissues. The aim of this study is to vascularize in vitro an adipose-derived stem cell (ADSC)/fibrin/collagen incorporated three-dimensional (3D) poly(d,l-lactic-co-glycolic acid) (PLGA) scaffold (10 × 10 × 10 mm3 ) with interconnected channels. A low-temperature 3D printing technique was employed to build the PLGA scaffold. A step-by-step cocktail procedure was designed to engage or steer the ADSCs in the PLGA channels towards both endothelial and smooth muscle cell lineages. The combined system had sufficient mechanical properties to support the cell/fibrin/collagen hydrogel inside the predefined PLGA channels. The ADSCs encapsulated in the fibrin/collagen hydrogel differentiated to endothelial and smooth muscle cell lineage, respectively, corresponding to their respective locations in the construct and formed vascular-like structures. This technique allows in vitro vascularization of the predefined PLGA channels and provides a choice for complex organ manufacture. Copyright © 2014 John Wiley & Sons, Ltd.
Assuntos
Tecido Adiposo/metabolismo , Colágeno/química , Fibrina/química , Ácido Láctico/química , Neovascularização Fisiológica , Ácido Poliglicólico/química , Células-Tronco/metabolismo , Alicerces Teciduais/química , Tecido Adiposo/citologia , Animais , Diferenciação Celular , Células Endoteliais/citologia , Células Endoteliais/metabolismo , Masculino , Músculo Liso Vascular/citologia , Músculo Liso Vascular/metabolismo , Miócitos de Músculo Liso/citologia , Miócitos de Músculo Liso/metabolismo , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Impressão Tridimensional , Ratos , Ratos Sprague-Dawley , Células-Tronco/citologiaRESUMO
How to release growth factors (GFs) scientifically to promote stem cell proliferation and differentiation is one of the most significant research focuses in the field of regenerative medicine. In a controlled release system, growth factors, extracellular matrices or biomaterial carriers, and sometimes stem cells together form a geometric entirety. Biomaterial carriers provide GFs with a support structure to be adhered, immobilized, encapsulated or/and protected. As a unity, the release rate and rhythm of GFs on cells are normally very delicate and precise. Up to now, the best strategy for clinical applications is the combination systems that encapsulate GFs in microspheres, particularly the nano- or micro-encapsulation techniques integrated GFs with biomaterial carriers. In this mini review, we summarize the current progress in GF delivery systems for regenerative medicine and provide an outlook on two main aspects: one is the classes of stem cells and GFs that have been used frequently in regenerative medicine, including their respective application conditions and functions; the other is the controlled GF release systems, in which various GFs are released orderly and continuously without diffusing simply and rapidly, including their respective opportunities and challenges.