Antibacterial mechanism of the methanol extract of Thamnolia subuliformis (Ehrh.) W. Culb against Staphylococcus aureus.

Thamnolia subuliformis (Ehrh.) W. Culb is a species of lichen with edible and medicinal applications in China. Our previous studies demonstrated that the methanol extract of Thamnolia subuliformis (METS) exhibits broad antibacterial activity and stability against foodborne pathogens. This study aimed to investigate the antibacterial mechanism of METS against Staphylococcus aureus using nontargeted metabolomics, focusing on cell wall and membrane damage. The results revealed that the minimum inhibitory concentration (MIC) was 0.625 mg ml-1 and that METS had good biosafety at this concentration. METS caused significant damage to the cell wall and membrane integrity, based on both morphological observation by electron microscopy and the leakage of alkaline phosphatase, protein, and nucleic acid in the cell cultures. Treatment with METS at the MIC disrupted the lipid metabolism of S. aureus, causing a decrease in the metabolism of various phospholipids and sphingolipids in the cell membrane and an increase in the ratio of saturated fatty acids to unsaturated fatty acids. Moreover, it influenced intracellular amino acid and energy metabolism. These results shed light on the antibacterial mechanism of METS against S. aureus while also serving as a reference for the further development of natural antibacterial compounds derived from Thamnolia subuliformis.

Research on regenerative braking control of electric vehicles based on game theory optimization.

The energy-efficient, clean, and quiet attributes of electric vehicles offer solutions to conventional challenges related to resource scarcity and environmental pollution. Consequently, thorough research into harmonizing energy recuperation during braking, enhancing vehicle stability, and ensuring occupant comfort in electric vehicles is imperative for their effective advancement. The study introduces a regenerative braking control strategy for electric vehicles founded on game theory optimization to enhance braking performance and optimize braking energy utilization. Develop a regenerative braking control approach based on the dynamic model of an electric vehicle equipped with hub motors. Employing game theory, we establish participants, control variables, strategy sets, benefit functions, and constraints to optimize the coefficient K for regenerative braking. The efficacy and superiority of the control strategy model are validated through joint simulations using Matlab/Simulink and AVL Cruise. Research findings indicate: (1) Speed tracking error remains below 3% in both NEDC and CLTC-P simulations, underscoring the effectiveness of the dynamic model and control strategy devised in this study. (2) The energy recovery rate achieved by the game theory-based optimization strategy surpasses that of the Cruise self-contained strategy and fuzzy control strategy by 18.06% and 4.5% in the NEDC simulation, and by 13.48% and 3.85% in the CLTC-P simulation, respectively. The adhesion coefficient curves implemented on the front and rear axles, derived from the game theory optimization control strategy, closely approximate the ideal adhesion coefficient curve, leading to a substantial enhancement in the car's braking stability. The degree of jerk magnitude regulated by the game theory optimization strategy consistently falls within the ±3 m/s³ threshold, resulting in a considerable enhancement in the comfort of vehicle occupants. These outcomes underscore the efficacy of the game theory-based optimized control strategy in enhancing energy recovery, braking stability, and comfort throughout the braking process of the vehicle.

Hybrid Membrane of Sulfonated Poly(aryl ether ketone sulfone) Modified by Molybdenum Clusters with Enhanced Proton Conductivity.

Developing novel proton exchange membranes (PEMs) with low cost and superior performance to replace Nafion is of great significance. Polyoxometalate-doped sulfonated poly(aryl ether ketone sulfone) (SPAEKS) allows for the amalgamation of the advantages in each constituent, thereby achieving an optimized performance for the hybrid PEMs. Herein, the hybrid membranes by introducing 2MeIm-{Mo132} into SPAEKS are obtained. Excellent hydrophilic properties of 2MeIm-{Mo132} can help more water molecules be retained in the hybrid membrane, providing abundant carriers for proton transport and proton hopping sites to build successive hydrophilic channels, thus lowering the energy barrier, accelerating the proton migration, and significantly fostering the proton conductivity of hybrid membranes. Especially, SP-2MIMo132-5 exhibits an enhanced proton conductivity of 75 mS cm-1 at 80 °C, which is 82.9% higher than pristine SPAEKS membrane. Additionally, this membrane is suitable for application in proton exchange membrane fuel cells, and a maximum power density of 266.2 mW cm-2 can be achieved at 80 °C, which far exceeds that of pristine SPAEKS membrane (54.6 mW cm-2). This work demonstrates that polyoxometalate-based clusters can serve as excellent proton conduction sites, opening up the choice of proton conduction carriers in hybrid membrane design and providing a novel idea to manufacture high-performance PEMs.

Hyaluronidase-Responsive Bactericidal Cryogel for Promoting Healing of Infected Wounds: Inflammatory Attenuation, ROS Scavenging, and Immune Regulation.

Wounds infected with multidrug-resistant (MDR) bacteria are increasingly threatening public health and challenging clinical treatments because of intensive bacterial colonization, excessive inflammatory responses, and superabundant oxidative stress. To overcome this malignant burden and promote wound healing, a multifunctional cryogel (HA/TA2/KR2) composed of hyaluronic acid (HA), tannic acid (TA), and KR-12 peptides is designed. The cryogel exhibited excellent shape-memory properties, strong absorption performance, and hemostatic capacity. In vitro experiments demonstrated that KR-12 in the cryogel can be responsively released by stimulation with hyaluronidase produced by bacteria, reaching robust antibacterial activity against Escherichia coli (E. coli), MDR Pseudomonas aeruginosa (MDR-PA), and methicillin-resistant Staphylococcus aureus (MRSA) by disrupting bacterial cell membranes. Furthermore, the synergetic effect of KR-12 and TA can efficiently scavenge ROS and decrease expression of pro-inflammatory cytokines (tumor necrosis factor (TNF)-α & interleukin (IL)-6), as well as modulate the macrophage phenotype toward the M2 type. In vivo animal tests indicated that the cryogel can effectively destroy bacteria in the wound and promote healing process via accelerating angiogenesis and re-epithelialization. Proteomic analysis revealed the underlying mechanism by which the cryogel mainly reshaped the infected wound microenvironment by inhibiting the Nuclear factor kappa B (NF-κB) signaling pathway and activating the Janus kinase-Signal transducer and activator of transcription (JAK-STAT6) signaling pathway. Therefore, the HA/TA2/KR2 cryogel is a promising dressing candidate for MDR bacteria-infected wound healing.

Clinical profile, management and risk factors for seizure-related burn injuries among patients with epilepsy in southwest China.

Objective: The epidemiological information associated with seizure-related burn injuries is lacking in China. Therefore, this study aims to analyze the clinical profile, management, outcome, and risk factors of burns that are directly caused by seizures among epileptic patients, and identify the epidemiological characteristics to develop effective preventive strategies. Methods: This study was conducted between January 2002 and December 2022 in a large Chinese burn center. Data including clinical profile, wound treatment, and outcome were analyzed. A multiple linear regression was used to screen the risk factors for the length of hospital stay (LOS), and a multiple logistic regression was used to screen the contributory factors for the amputation. Results: A total of 184 burn patients (55.98 % females) were enrolled, with a 0.78 % incidence rate during the study period. The mean age of the patients was 36.16 years (SD: 17.93). Patients aged 20-29 were the most affected age groups (23.37 %). Most burns were caused by flame, accounting for 60.33 % (111/184) of all cases. In total, 76.09 % of the 184 patients underwent at least one operation, and 35 patients (19.02 %) still required amputation during the study period. Burn sites (hands) had the greatest impact on amputation (OR = 3.799), followed by flame burns (OR = 3.723). The mean LOS/TBSA was 6.90 ± 8.53 d, and a larger TBSA, full-thickness burns, and a higher number of operations were identified as the risk factors for a longer LOS. There was one death among the 184 patients, with a mortality rate of 0.54 %. Conclusion: This study demonstrates that burn injuries are extremely harmful to individuals with epilepsy in China because they are at high risk of amputation and disability. Effective healthcare education and preventive programs that focus on lifestyle modifications and seizure control should be implemented to reduce the burn incidence in these populations.

Mannitol inhibits the proliferation of neural stem cell by a p38 mitogen-activated protein kinase-dependent signaling pathway.

PURPOSE: Mannitol is one of the first-line drugs for reducing cerebral edema through increasing the extracellular osmotic pressure. However, long-term administration of mannitol in the treatment of cerebral edema triggers damage to neurons and astrocytes. Given that neural stem cell (NSC) is a subpopulation of main regenerative cells in the central nervous system after injury, the effect of mannitol on NSC is still elusive. The present study aims to elucidate the role of mannitol in NSC proliferation. METHODS: C57 mice were derived from the animal house of Zunyi Medical University. A total of 15 pregnant mice were employed for the purpose of isolating NSCs in this investigation. Initially, mouse primary NSCs were isolated from the embryonic cortex of mice and subsequently identified through immunofluorescence staining. In order to investigate the impact of mannitol on NSC proliferation, both cell counting kit-8 assays and neurospheres formation assays were conducted. The in vitro effects of mannitol were examined at various doses and time points. In order to elucidate the role of Aquaporin 4 (AQP4) in the suppressive effect of mannitol on NSC proliferation, various assays including reverse transcription polymerase chain reaction, western blotting, and immunocytochemistry were conducted on control and mannitol-treated groups. Additionally, the phosphorylated p38 (p-p38) was examined to explore the potential mechanism underlying the inhibitory effect of mannitol on NSC proliferation. Finally, to further confirm the involvement of the p38 mitogen-activated protein kinase-dependent (MAPK) signaling pathway in the observed inhibition of NSC proliferation by mannitol, SB203580 was employed. All data were analyzed using SPSS 20.0 software (SPSS, Inc., Chicago, IL). The statistical analysis among multiple comparisons was performed using one-way analysis of variance (ANOVA), followed by Turkey's post hoc test in case of the data following a normal distribution using a Shapiro-Wilk normality test. Comparisons between 2 groups were determined using Student's t-test, if the data exhibited a normal distribution using a Shapiro-Wilk normality test. Meanwhile, data were shown as median and interquartile range and analyzed using the Mann-Whitney U test, if the data failed the normality test. A p < 0.05 was considered as significant difference. RESULTS: Primary NSC were isolated from the mice, and the characteristics were identified using immunostaining analysis. Thereafter, the results indicated that mannitol held the capability of inhibiting NSC proliferation in a dose-dependent and time-dependent manner using cell counting kit-8, neurospheres formation, and immunostaining of Nestin and Ki67 assays. During the process of mannitol suppressing NSC proliferation, the expression of AQP4 mRNA and protein was downregulated, while the gene expression of p-p38 was elevated by reverse transcription polymerase chain reaction, immunostaining, and western blotting assays. Subsequently, the administration of SB203580, one of the p38 MAPK signaling pathway inhibitors, partially abrogated this inhibitory effect resulting from mannitol, supporting the fact that the p38 MAPK signaling pathway participated in curbing NSC proliferation induced by mannitol. CONCLUSIONS: Mannitol inhibits NSC proliferation through downregulating AQP4, while upregulating the expression of p-p38 MAPK.

Grapevine plantlets respond to different monochromatic lights by tuning photosynthesis and carbon allocation.

The quality of planting materials is the foundation for productivity, longevity, and berry quality of perennial grapevines with a long lifespan. Manipulating the nursery light spectrum may speed up the production of healthy and high-quality planting vines but the underlying mechanisms remain elusive. Herein, the effects of different monochromatic lights (green, blue, and red) on grapevine growth, leaf photosynthesis, whole-plant carbon allocation, and transcriptome reprograming were investigated with white light as control. Results showed that blue and red lights were favorable for plantlet growth in comparison with white light. Blue light repressed excessive growth, significantly increased the maximum net photosynthetic rate (Pn) of leaves by 39.58% and leaf specific weight by 38.29%. Red light increased the dry weight of the stem by 53.60%, the starch content of the leaf by 53.63%, and the sucrose content of the stem by 230%. Green light reduced all photosynthetic indexes of the grape plantlet. Photosynthetic photon flux density (PPFD)/Ci-Pn curves indicated that blue light affected photosynthetic rate depending on the light intensity and CO2 concentration. RNA-seq analysis of different organs (leaf, stem, and root) revealed a systematic transcriptome remodeling and VvCOP1 (CONSTITUTIVELY PHOTOMORPHOGENIC 1), VvHY5 (ELONGATED HYPOCOTYL5), VvHYH (HY5 HOMOLOG), VvELIP (early light-induced protein) and VvPIF3 (PHYTOCHROME INTERACTING FACTOR 3) may play important roles in this shoot-to-root signaling. Furthermore, the correlation network between differential expression genes and physiological traits indicated that VvpsbS (photosystem II subunit S), Vvpsb28 (photosystem II subunit 28), VvHYH, VvSUS4 (sucrose synthase 4), and VvALDA (fructose-bisphosphate aldolase) were pertinent candidate genes in responses to different light qualities. Our results provide a foundation for optimizing the light recipe of grape plantlets and strengthen the understanding of light signaling and carbon metabolism under different monochromatic lights.

Ultrasonic defect detection of high-density polyethylene pipe materials using FIR filtering and block-wise singular value decomposition.

Condition monitoring of high-density polyethylene (HDPE) pipes used for fluid and gas transfer is important for the safety of energy conservation and the environment. Ultrasonic phased array imaging methods provide a solution to detect and assess defects in HDPE pipes. However, ultrasonic bulk waves propagating in these viscoelastic media are strongly attenuated, resulting in reduced signal amplitude. In this study, a linear-phase Finite Impulse Response (FIR) filter is used to remove unwanted frequency components from the measured ultrasonic signals to improve the signal-to-noise ratio before applying the imaging algorithm of the total focusing method (TFM). Building upon this, a block-wise singular value decomposition (SVD) technique, which can adaptively determine the singular value cutoff threshold based on each block in the whole TFM image, is used to enhance the obtained TFM image quality. The performance of the combination of FIR filtering and block-wise SVD technique is validated by experimental data of HDPE pipe materials. Results demonstrate that the proposed approach generates good images to provide the detection and characterization of side-drilled holes in HDPE pipe materials.

High-throughput profiling the effects of zinc on antibiotic resistance genes in the anaerobic digestion of swine manure.

The problem of antibiotic resistance genes (ARGs) caused by heavy metals has attracted extensive attention of human beings. Zn, a widely used feed additive, has a very high residue in swine manure, but the distribution characteristics of ARGs imposed by Zn in anaerobic digestion (AD) products are not clear. In this study, the behaviour of mobile genetic elements (MGEs), bacterial community, and their association with ARGs were determined in the presence of 125 and 1250 mg L-1 Zn in AD system of swine manure. Zn-treated enriched the abundance of ARGs, and produced some new genotypes that were not detected in CK treatment. In addition, low concentration of Zn significantly increased the relative abundance of ARGs, as compared to higher Zn and CK group. Correspondingly, the abundances of most top30 genus were highest in ZnL (125 mg L-1 Zn), followed by CK and ZnH (1250 mg L-1 Zn). Notably, network analysis showed that the relationship between ARGs and MGEs is closer than that ARGs and bacteria, suggesting that ARGs increased in Zn-treated, especially low level Zn, may be due to the amplification transfer of ARGs among varied microorganisms by horizontal transfer with MGEs. Therefore, strengthen the management of in livestock manure is crucial to control the spread of ARGs in organic fertilizers.

Clinical epidemiology and a novel predicting nomogram of central line associated bloodstream infection in burn patients.

Burn patients are at high risk of central line-associated bloodstream infection (CLABSI). However, the diagnosis of such infections is complex, resource-intensive, and often delayed. This study aimed to investigate the epidemiology of CLABSI and develop a prediction model for the infection in burn patients. The study analysed the infection profiles, clinical epidemiology, and central venous catheter (CVC) management of patients in a large burn centre in China from January 2018 to December 2021. In total, 222 burn patients with a cumulative 630 CVCs and 5,431 line-days were included. The CLABSI rate was 23.02 CVCs per 1000 line-days. The three most common bacterial species were Acinetobacter baumannii, Staphylococcus aureus, and Pseudomonas aeruginosa; 76.09% of isolates were multidrug resistant. Compared with a non-CLABSI cohort, CLABSI patients were significantly older, with more severe burns, more CVC insertion times, and longer total line-days, as well as higher mortality. Regression analysis found longer line-days, more catheterisation times, and higher burn wounds index to be independent risk factors for CLABSI. A novel nomogram based on three risk factors was constructed with an area under the receiver operating characteristic curve (AUROC) value of 0.84 (95% CI: 0.782-0.898) with a mean absolute error of calibration curve of 0.023. The nomogram showed excellent predictive ability and clinical applicability, and provided a simple, practical, and quantitative strategy to predict CLABSI in burn patients.

Investigation and Characterization of Pickering Emulsion Stabilized by Alkali-Treated Zein (AZ)/Sodium Alginate (SA) Composite Particles.

Pickering emulsions stabilized by food-grade colloidal particles have attracted increasing attention in recent years due to their "surfactant-free" nature. In this study, the alkali-treated zein (AZ) was prepared via restricted alkali deamidation and then combined with sodium alginate (SA) in different ratios to obtain AZ/SA composite particles (ZS), which were used to stabilize Pickering emulsion. The degree of deamidation (DD) and degree of hydrolysis (DH) of AZ were 12.74% and 6.58% respectively, indicating the deamidation occurred mainly in glutamine on the side chain of the protein. After the treatment with alkali, AZ particle size decreased significantly. Moreover, the particle size of ZS with different ratios was all less than 80 nm. when the AZ/SA ratio was 2:1(Z2S1) and 3:1(Z3S1), the three-phase contact angle (θo/w) were close to 90°, which was favorable for stabilizing the Pickering emulsion. Furthermore, at a high oil phase fraction (75%), Z3S1-stabilized Pickering emulsions showed the best long-term storage stability within 60 days. Confocal laser scanning microscope (CLSM) observations showed that the water-oil interface was wrapped by a dense layer of Z3S1 particles with non-agglomeration between independent oil droplets. At constant particle concentration, the apparent viscosity of the Pickering emulsions stabilized by Z3S1 gradually decreased with increasing oil phase fraction, and the oil-droplet size and the Turbiscan stability index (TSI) also gradually decreased, exhibiting solid-like behavior. This study provides new ideas for the fabrication of food-grade Pickering emulsions and will extend the future applications of zein-based Pickering emulsions as bioactive ingredient delivery systems.

Effective perspiration is essential to uphold the stability of zero-gap MEA-based cathodes used in CO2 electrolysers.

The application of gas diffusion electrodes (GDEs) for the electrochemical reduction of CO2 to value-added products creates the possibility of achieving current densities of a few hundred mA cm-2. To achieve stable operation at such high reaction rates remains, however, a challenging task, due to the flooding of the GDE. In order to mitigate flooding in a zero-gap membrane-electrode assembly (MEA) configuration, paths for effective electrolyte perspiration inside the GDE structure have to be kept open during the electrolysis process. Here we demonstrate that apart from the operational parameters of the electrolysis and the structural properties of the supporting gas diffusion layers, also the chemical composition of the applied catalyst inks can play a decisive role in the electrolyte management of GDEs used for CO2 electroreduction. In particular, the presence of excess amounts of polymeric capping agents (used to stabilize the catalyst nanoparticles) can lead to a blockage of micropores, which hinders perspiration and initiates the flooding of the microporous layer. Here we use a novel ICP-MS analysis-based approach to quantitatively monitor the amount of perspired electrolyte that exits a GDE-based CO2 electrolyser, and we show a direct correlation between the break-down of effective perspiration and the appearance of flooding-the latter ultimately leading to a loss of electrolyser stability. We recommend the use of an ultracentrifugation-based approach by which catalyst inks containing no excess amount of polymeric capping agents can be formulated. Using these inks, the stability of electrolyses can be ensured for much longer times.

Study on the Influence of the Preparation Method of Konjac Glucomannan-Silica Aerogels on the Microstructure, Thermal Insulation, and Flame-Retardant Properties.

Natural polysaccharides with high viscosity, good thermal stability, and biocompatibility can improve the mechanical properties of inorganic silica aerogels and enhance their application safety. However, the effects of the preparation methods of polysaccharide-silica aerogels on their microstructure and application properties have not been systematically studied. To better investigate the effect of the microstructure on the properties of aerogel materials, two aerogels with different structures were prepared using Konjac glucomannan (KGM) and tetraethoxysilane (TEOS) via physical blending (KTB) and co-precursor methods (KTC), respectively. The structural differences between the KTB and KTC aerogels were characterized, and the thermal insulation and fire-retardant properties were further investigated. The compressive strength of the KTC aerogels with a cross-linked interpenetrating network (IPN) structure was three times higher than that of the KTB aerogels, while their thermal conductivity was 1/3 of that of the KTB aerogels. The maximum limiting oxygen index (LOI) of the KTC aerogels was 1.4 times, the low peak heat release rate (PHRR) was reduced by 61.45%, and the lowest total heat release (THR) was reduced by 41.35% compared with the KTB aerogels. The results showed that the KTC aerogels with the IPN have better mechanical properties, thermal insulation, and fire-retardant properties than the simple physically blending KTB aerogels. This may be due to the stronger hydrogen-bonding interactions between KGM and silica molecules in the KTC aerogels under the unique forcing effect of the IPN, thus enhancing their structural stability and achieving complementary properties. This work will provide new ideas for the microstructure design of aerogels and the research of new thermal insulation and fire-retardant aerogels.

Robust and quantitative characterization of aircraft icing with mode and frequency selective ultrasonic guided wave.

The aircraft flight safety and efficiency are largely affected by the aircraft icing, whose characterization is of great significance to guiding the de-icing operation. This study targets a robust and quantitative characterization of icing with ultrasonic guided wave (UGW) of selective frequency-mode pair. Firstly, the frequency domain finite element (FDFE) model is developed to quantitatively analyze the reflection, transmission, and mode conversion of UGW with icing aluminum plate of different lengths and thickness, in order to pick the UGW with appropriate frequency-mode pair sensitive to icing. With the candidate UGW frequency-mode pair, the time domain finite element (TDFE) analysis is further performed to validate the effectiveness of FDFE and to optimize the pulse duration cycle for icing detection. Finally, based on the performed FDFE and TDFE analysis, experimental icing characterization is carried out with the UGW of the selected frequency-mode pair. Results show that the selected UGW at (1239 kHz, mode A1) with ice (0.5 mm thick) has achieved a high detection sensitivity based on the time-of-flight and good robustness against the random error, showing the great potential for the application of UGW to aircraft icing characterization.

Reconstruction of Composite Stiffness Matrix with Array-Guided Wave-Based Genetic Algorithm.

Accurate measurement of the material parameters of composite in a nondestructive manner is of great significance for evaluating mechanical performance. This study proposes to use a genetic algorithm (GA) to reconstruct the stiffness matrix of carbon fiber reinforced polymer (CFRP) with array-guided wave (GW)-based GA. By comparing the numerically calculated GW dispersion curves with the experimental wave number-frequency contour calculated with a two-dimensional Fourier transform (2D-FFT), the matching coefficient is directly obtained as the objective function of the GA, avoiding the overhead of sorting out the respective GW modes. Then the measured stiffness matrix with tensile testing and the longitudinal wave in the unidirectional CFRP is compared with the reconstructed parameters from unidirectional, cross-ply, and quasi-isotropic CFRPs with the GA. For the four independent parameters, excluding C12, an average value of 11.62% for the maximum deviation is achieved among the CFRPs with three stacking sequences, and an average deviation of 11.03% in unidirectional CFRPs is achieved for the parameters measured with different methods. A further correction of fiber orientation results in a relative deviation of only 2.72% for the elastic modulus along the tensile direction, and an expansion of the GW frequency range for the GA narrows down the relative deviation of C12 to 3.9%. The proposed GW-based GA opens up a way of in situ and nondestructive measurement for the composite stiffness matrix.

Cracks as Efficient Tools to Mitigate Flooding in Gas Diffusion Electrodes Used for the Electrochemical Reduction of Carbon Dioxide.

The advantage of employing gas diffusion electrodes (GDEs) in carbon dioxide reduction electrolyzers is that they allow CO2 to reach the catalyst in gaseous state, enabling current densities that are orders of magnitude larger than what is achievable in standard H-type cells. The gain in the reaction rate comes, however, at the cost of stability issues related to flooding that occurs when excess electrolyte permeates the micropores of the GDE, effectively blocking the access of CO2 to the catalyst. For electrolyzers operated with alkaline electrolytes, flooding leaves clear traces within the GDE in the form of precipitated potassium (hydrogen)carbonates. By analyzing the amount and distribution of precipitates, and by quantifying potassium salts transported through the GDE during operation (electrolyte perspiration), important information can be gained with regard to the extent and means of flooding. In this work, a novel combination of energy dispersive X-ray and inductively coupled plasma mass spectrometry based methods is employed to study flooding-related phenomena in GDEs differing in the abundance of cracks in the microporous layer. It is concluded that cracks play an important role in the electrolyte management of CO2 electrolyzers, and that electrolyte perspiration through cracks is paramount in avoiding flooding-related performance drops.

Through transmission ultrasonic inspection of fiber waviness for thickness-tapered composites using ultrasound non-reciprocity: Simulation and experiment.

This study proposed the use of ultrasound non-reciprocity in periodic structures to inspect fiber waviness in thickness-tapered composites. Ultrasound propagation in plain and thickness-tapered composites with complex microstructure were precisely modelled using TexGen® and OnScale® simulation software. Ultrasound non-reciprocity and attenuation was comparatively calculated to inspect fiber waviness through both simulation and experiment. After comparison, energy of transmitted waves was found to be sensitive to the presence of fiber waviness in plain composites, however, thickness-dependent ultrasound attenuation introduces difficulties in determining the diagnosis baseline for thickness-tapered composites. On the other hand, fiber waviness introduces direction-dependent nonlinearity in the wavy region, which introduces a disparity between the two transmitted signals when the propagation direction is reversed. Ultrasound non-reciprocity, defined by the time-of-flight difference between the two transmitted signals, demonstrated its efficiency for fiber waviness inspection in both plain and thickness-tapered composites regardless of variations in the thickness.

Correction: Threading of three rings on two stations: a convergent approach to [4]rotaxane.

Correction for 'Threading of three rings on two stations: a convergent approach to [4]rotaxane' by Yidan Zhou et al., Chem. Commun., 2021, 57, 13506-13509, DOI: 10.1039/D1CC05501A.

Threading of three rings on two stations: a convergent approach to [4]rotaxane.

A novel approach to efficient and selective construction of [4]rotaxane was proposed to demonstrate the superiority of H-bonded azo-macrocycles in forging higher order rotaxanes. The single crystal structure reveals the importance of the interplay of multiple non-covalent bonding interactions, particularly π-stacking interactions, in stabilizing the host-guest complex. This may open an avenue to the synthesis of oligomeric mechanically interlocked molecules containing fewer stations but more rings.