Skin organoid transplantation promotes tissue repair with scarless in frostbite.

Frostbite is the most common cold injury and is caused by both immediate cold-induced cell death and the gradual development of localized inflammation and tissue ischemia. Delayed healing of frostbite often leads to scar formation, which not only causes psychological distress but also tends to result in the development of secondary malignant tumors. Therefore, a rapid healing method for frostbite wounds is urgently needed. Herein, we used a mouse skin model of frostbite injury to evaluate the recovery process after frostbite. Moreover, single-cell transcriptomics was used to determine the patterns of changes in monocytes, macrophages, epidermal cells and fibroblasts during frostbite. Most importantly, human-induced pluripotent stem cell (hiPSC) -derived skin organoids combining with gelatin-hydrogel were constructed for the treatment of frostbite. The results showed that skin organoid treatment significantly accelerated wound healing by reducing early inflammation after frostbite and increasing the proportions of epidermal stem cells. Moreover, in the later stage of wound healing, skin organoids reduced the overall proportions of fibroblasts, significantly reduced fibroblast-to-myofibroblast transition by regulating the integrin α5ß1-FAK pathway, and remodeled the extracellular matrix (ECM) through degradation and reassembly mechanisms, facilitating the restoration of physiological ECM and reducing the abundance of ECM associated with abnormal scar formation. These results highlight the potential application of organoids for promoting the reversal of frostbite-related injury and the recovery of skin functions. This study provides a new therapeutic alternative for patients suffering from disfigurement and skin dysfunction caused by frostbite.

Peroxisomal homeostasis in metabolic diseases and its implication in ferroptosis.

Peroxisomes are dynamic organelles involved in various cellular processes, including lipid metabolism, redox homeostasis, and intracellular metabolite transfer. Accumulating evidence suggests that peroxisomal homeostasis plays a crucial role in human health and disease, particularly in metabolic disorders and ferroptosis. The abundance and function of peroxisomes are regulated by a complex interplay between biogenesis and degradation pathways, involving peroxins, membrane proteins, and pexophagy. Peroxisome-dependent lipid metabolism, especially the synthesis of ether-linked phospholipids, has been implicated in modulating cellular susceptibility to ferroptosis, a newly discovered form of iron-dependent cell death. This review discusses the current understanding of peroxisome homeostasis, its roles in redox regulation and lipid metabolism, and its implications in human diseases. We also summarize the main mechanisms of ferroptosis and highlight recent discoveries on how peroxisome-dependent metabolism and signaling influence ferroptosis sensitivity. A better understanding of the interplay between peroxisomal homeostasis and ferroptosis may provide new insights into disease pathogenesis and reveal novel therapeutic strategies for peroxisome-related metabolic disorders and ferroptosis-associated diseases.

Novel Feruloyl Esterase for the Degradation of Polyethylene Terephthalate (PET) Screened from the Gut Microbiome of Plastic-Degrading Mealworms (Tenebrio Molitor Larvae).

Mealworms (Tenebrio molitor) larvae can degrade both plastics and lignocellulose through synergistic biological activities of their gut microbiota because they share similarities in chemical and physical properties. Here, a total of 428 genes encoding lignocellulose-degrading enzymes were screened from the gut microbiome of T. molitor larvae to identify poly(ethylene terephthalate) (PET)-degrading activities. Five genes were successfully expressed in E. coli, among which a feruloyl esterase-like enzyme named TmFae-PETase demonstrated the highest PET degradation activity, converting PET into MHET (0.7 mgMHETeq ·h-1·mgenzyme-1) and TPA (0.2 mgTPAeq ·h-1·mgenzyme-1) at 50 °C. TmFae-PETase showed a preference for the hydrolysis of ferulic acid methyl ester (MFA) in the presence of both PET and MFA. Site-directed mutagenesis and molecular dynamics simulations of TmFae-PETase revealed similar catalytic mechanisms for both PET and MFA. TmFae-PETase effectively depolymerized commercial PET, making it a promising candidate for application. Additionally, the known PET hydrolases IsPETase, FsC, and LCC also hydrolyzed MFA, indicating a potential origin of PET hydrolytic activity from its lignocellulosic-degrading abilities. This study provides an innovative strategy for screening PET-degrading enzymes identified from lignocellulose degradation-related enzymes within the gut microbiome of plastic-degrading mealworms. This discovery expands the existing pool of plastic-degrading enzymes available for resource recovery and bioremediation applications.

Complete genome sequence analysis of Pestalotiopsis microspora, a fungal pathogen causing kiwifruit postharvest rots.

BACKGROUND: The postharvest rot of kiwifruit is one of the most devastating diseases affecting kiwifruit quality worldwide. However, the genomic basis and pathogenicity mechanisms of kiwifruit rot pathogens are lacking. Here we report the first whole genome sequence of Pestalotiopsis microspora, one of the main pathogens causing postharvest kiwifruit rot in China. The genome of strain KFRD-2 was sequenced, de novo assembled, and analyzed. RESULTS: The genome of KFRD-2 was estimated to be approximately 50.31 Mb in size, with an overall GC content of 50.25%. Among 14,711 predicted genes, 14,423 (98.04%) exhibited significant matches to genes in the NCBI nr database. A phylogenetic analysis of 26 known pathogenic fungi, including P. microspora KFRD-2, based on conserved orthologous genes, revealed that KFRD-2's closest evolutionary relationships were to Neopestalotiopsis spp. Among KFRD-2's coding genes, 870 putative CAZy genes spanned six classes of CAZys, which play roles in degrading plant cell walls. Out of the 25 other plant pathogenic fungi, P. microspora possessed a greater number of CAZy genes than 22 and was especially enriched in GH and AA genes. A total of 845 transcription factors and 86 secondary metabolism gene clusters were predicted, representing various types. Furthermore, 28 effectors and 109 virulence-enhanced factors were identified using the PHI (pathogen host-interacting) database. CONCLUSION: This complete genome sequence analysis of the kiwifruit postharvest rot pathogen P. microspora enriches our understanding its disease pathogenesis and virulence. This study establishes a theoretical foundation for future investigations into the pathogenic mechanisms of P. microspora and the development of enhanced strategies for the efficient management of kiwifruit postharvest rots.

Contactless ultrasound droplet manipulation system for mixing chemical reagents.

Green chemistry has been a rising topic in environmental sustainability, with a focus on the waste and consumption reduction of chemical and biomedical industries. Traditional chemical handling processes require tools that contact chemical reagents to produce vast amounts of residues and disposals. This study presents a contactless chemical mixing system that integrates acoustic droplet ejection and levitation techniques. First, the acoustic droplet ejection system creates a droplet in mid-air from a designated liquid reservoir by focusing acoustic energy at the liquid-air junction. The droplet levitation system captures and transports the droplet along a predetermined path by shifting the focal points of the acoustic standing waves. This facilitates contactless mixing of chemicals in a defined ratio. Notably, this study employs piezoelectric discs in an acoustic droplet ejection system to eject droplets from liquids. The relationship between the duration of the driving bursts and height and size of ejected droplets was also investigated. The proposed acoustic standing wave levitation system captures droplets with weights between 2.8 and 5.2 mg. To assess the reliability of the proposed system, 25 droplets were sequentially generated and transported to the mixing well without failure. The root mean square error between the collected and expected liquid weights was only 0.098 mg. The proposed system offers a promising solution for reducing waste and promoting environmentally friendly practices in chemical and biomedical laboratories.

Triptolide-induced cuproptosis is a novel antitumor strategy for the treatment of cervical cancer.

BACKGROUND: Cuproptosis is a unique copper-dependent form of cell death that is highly correlated with the metabolic state of cells. Triptolide exerts pharmacological activity by altering the regulation of metal ions. Cuproptosis is poorly understood in cancer, so in this study, we explored whether triptolide could induce cuproptosis in cervical cancer cells. METHODS: The human cervical cancer cell lines HeLa and SiHa, which primarily rely on oxidative phosphorylation, were treated with triptolide. Cell viability, proliferation and migration, copper levels and cuproptosis-related protein levels were evaluated in these cell lines. The copper ion chelator tetrathiomolybdate (TTM) was administered to determine whether it could reverse the cuproptosis induced by triptolide. In addition, a nude mouse cervical cancer xenograft model was established to determine the effects of triptolide on cuproptosis in isolated tumor tissues. RESULTS: The copper concentration increased with triptolide treatment. The levels of cuproptosis -related proteins, such as FDX1, LIAS, and DLAT, in the HeLa and SiHa cell lines decreased with triptolide treatment. XIAP, the target of triptolide, played a role in cuproptosis by regulating COMMD1. The level of copper exporters (ATP7A/B) decreased, but the level of the copper importer (CTR1) did not change with triptolide treatment. Furthermore, triptolide inhibited cervical cancer growth and induced cuproptosis in vivo. CONCLUSIONS: In summary, we report a new antitumor mechanism by which triptolide disrupted intracellular copper homeostasis and induced cuproptosis in cervical cancer by regulating the XIAP/COMMD1/ATP7A/B axis.

Establishment of a CD8+ T cells-related prognostic risk model for acral melanoma based on single-cell and bulk RNA sequencing.

BACKGROUND: CD8+ T cells have been recognized as crucial factors in the prognosis of melanoma. However, there is currently a lack of gene markers that accurately describe their characteristics and functions in acral melanoma (AM), which hinders the development of personalized medicine. METHODS: Firstly, we explored the composition differences of immune cells in AM using single-cell RNA sequencing (scRNA-seq) data and comprehensively characterized the immune microenvironment of AM in terms of composition, developmental differentiation, function, and cell communication. Subsequently, we constructed and validated a prognostic risk scoring model based on differentially expressed genes (DEGs) of CD8+ T cells using the TCGA-SKCM cohort through Lasso-Cox method. Lastly, immunofluorescence staining was performed to validate the expression of four genes (ISG20, CCL4, LPAR6, DDIT3) in AM and healthy skin tissues as included in the prognostic model. RESULTS: The scRNA-seq data revealed that memory CD8+ T cells accounted for the highest proportion in the immune microenvironment of AM, reaching 70.5%. Cell-cell communication analysis showed extensive communication relationships among effector CD8+ T cells. Subsequently, we constructed a prognostic scoring model based on DEGs derived from CD8+ T cell sources. Four CD8+ T cell-related genes were included in the construction and validation of the prognostic model. Additionally, immunofluorescence results demonstrated that ISG20 and CCL4 were downregulated, while LPAR6 and DDIT3 were upregulated in AM tissues compared to normal skin tissues. CONCLUSION: Identifying biomarkers based on the expression levels of CD8+ T cell-related genes may be an effective approach for establishing prognostic models in AM patients. The independently prognostic risk evaluation model we constructed provides new insights and theoretical support for immunotherapy in AM.

Effect of liquid level monitor gas injection point size on information source amplitude-frequency characteristics.

In order to analyse the effect of the injection point size of the CBM (Coalbed Methane) well level monitor on the amplitude and frequency of pressure pulsations in the wellhead manifold, numerical simulations and experiments were carried out to investigate the effect of different injection point sizes on the amplitude and frequency of pressure pulsations downstream of the sudden expansion structure. Using compressed air as the fluid and the size of the injection point as the variable, the amplitude and frequency of pressure pulsations at different locations downstream of the sudden expansion structure were tested. The results show that the pressure pulsation amplitude is affected by the size of the injection point, and the larger the injection point is, the larger the pressure pulsation amplitude is; the size of the injection point has less influence on the pressure pulsation frequency downstream of the protruding and expanding structure, and the pressure pulsation frequency at 0.5 m and 1 m downstream of the protruding and expanding structure is in the vicinity of 76 Hz. Therefore, the echo signal processing should be filtered around this frequency to obtain accurate liquid level echo signals, so as to improve the accuracy of liquid level monitoring and realise the efficient development of coalbed methane wells.

Detecting cell types and densities in the tumor microenvironment improves prognostic risk assessment for breast cancer.

A comprehensive evaluation of the relationship between the densities of various cell types in the breast cancer tumor microenvironment and patient prognosis is currently lacking. Additionally, the absence of a large patch-level whole slide imaging (WSI) dataset of breast cancer with annotated cell types hinders the ability of artificial intelligence to evaluate cell density in breast cancer WSI. We first employed Lasso-Cox regression to build a breast cancer prognosis assessment model based on cell density in a population study. Pathology experts manually annotated a dataset containing over 70,000 patches and used transfer learning based on ResNet152 to develop an artificial intelligence model for identifying different cell types in these patches. The results showed that significant prognostic differences were observed among breast cancer patients stratified by cell density score (P = 0.0018), with the cell density score identified as an independent prognostic factor for breast cancer patients (P < 0.05). In the validation cohort, the predictive performance for overall survival (OS) was satisfactory, with area under the curve (AUC) values of 0.893 (OS) at 1-year, 0.823 (OS) at 3-year, and 0.861 (OS) at 5-year intervals. We trained a robust model based on ResNet152, achieving over 99% classification accuracy for different cell types in patches. These achievements offer new public resources and tools for personalized treatment and prognosis assessment.

An Evaluation of the Corrosion Inhibition Performance of Chitosan Modified by Quaternary Ammonium Salt for Carbon Steel in Stone Processing Wastewater.

Chitosan was used as the raw material. A quaternization reaction was carried out between 2,3-epoxypropyltrimethylammonium chloride and water-soluble chitosan to prepare quaternary ammonium salt water-soluble chitosan (QWSC), and its corrosion inhibition performance against the corrosion of carbon steel in stone processing wastewater was evaluated. The corrosion inhibition efficiencies of QWSC on carbon steel in stone processing wastewater were investigated through weight loss, as well as electrochemical and surface morphology characterization techniques. The results show that QWSC has superior corrosion inhibition performance for A3 carbon steel. When an amount of 60 mL·L-1 is added, the corrosion inhibition efficiency can reach 59.51%. Electrochemical research has shown that a QWSC inhibitor is a mixed-type corrosion inhibitor. The inhibition mechanisms of the QWSC inhibitor revealed that the positive charge on the surface of carbon steel in stone wastewater was conducive to the adsorption of Cl- in the medium, which produced an excessive negative charge on the metal's surface. At the same time, the quaternary ammonium cation and amino cation formed in QWSC in stone processing wastewater can be physically absorbed on the surface of A3 carbon steel, forming a thin-film inhibitor to prevent metal corrosion.

Targeting ferroptosis by natural products in pathophysiological conditions.

Ferroptosis is a form of cell death that is induced by iron-mediated accumulation of lipid peroxidation. The involvement of ferroptosis in different pathophysiological conditions has offered new perspectives on potential therapeutic interventions. Natural products, which are widely recognized for their significance in drug discovery and repurposing, have shown great promise in regulating ferroptosis by targeting various ferroptosis players. In this review, we discuss the regulatory mechanisms of ferroptosis and its implications in different pathological conditions. We dissect the interactions between natural products and ferroptosis in cancer, ischemia/reperfusion, neurodegenerative diseases, acute kidney injury, liver injury, and cardiomyopathy, with an emphasis on the relevance of ferroptosis players to disease targetability.

Environmental risks of mask wastes binding pollutants: Phytotoxicity, microbial community, nitrogen and carbon cycles.

The increasing contamination of mask wastes presents a significant global challenge to ecological health. However, there is a lack of comprehensive understanding regarding the environmental risks that mask wastes pose to soil. In this study, a total of 12 mask wastes were collected from landfills. Mask wastes exhibited negligible morphological changes, and bound eight metals and four types of organic pollutants. Masks combined with pollutants inhibited the growth of alfalfa and Elymus nutans, reducing underground biomass by 84.6 %. Mask wastes decreased the Chao1 index and the relative abundances (RAs) of functional bacteria (Micrococcales, Gemmatimonadales, and Sphingomonadales). Metagenomic analysis showed that mask wastes diminished the RAs of functional genes associated with nitrification (amoABC and HAO), denitrification (nirKS and nosZ), glycolysis (gap2), and TCA cycle (aclAB and mdh), thereby inhibiting the nitrogen transformation and ATP production. Furthermore, some pathogenic viruses (Herpesviridae and Tunggulvirus) were also found on the mask wastes. Structural equation models demonstrated that mask wastes restrained soil enzyme activities, ultimately affecting nitrogen and carbon cycles. Collectively, these evidences indicate that mask wastes contribute to soil health and metabolic function disturbances. This study offers a new perspective on the potential environmental risks associated with the improper disposal of masks.

Association between rheumatoid arthritis and serum vitamin C levels in Adults: Based on the National health and Nutrition Examination survey database.

This study attempted to investigate relationship between rheumatoid arthritis and serum vitamin C levels using data from National Health and Nutrition Examination Survey (NHANES). The NHANES database aims to collect health, nutrition, biological, and behavioral data from a nationally representative sample of the population. This study utilizes NHANES data from three cycles: 2003-2004, 2005-2006, and 2017-2018, extracting data on the prevalence of rheumatoid arthritis and serum vitamin C levels. A generalized linear model is used to evaluate the association between the two. A total of 12,665 participants were included in the final analysis. Serum vitamin C levels were significantly higher in the non-rheumatoid arthritis group compared to the rheumatoid arthritis group (0.63 vs. 0.59, P = 0.042). Generalized linear model analysis showed that higher serum vitamin C levels were associated with a decreased risk of rheumatoid arthritis (OR = 0.62, 95 %CI: 0.40-0.98, P = 0.034). Stratified analysis revealed a significant interaction between non-hypertensive individuals and rheumatoid arthritis with serum vitamin C levels (P < 0.05). After adjusting for confounding factors, serum vitamin C levels remained significantly associated with rheumatoid arthritis in all models (P < 0.05). Restricted cubic spline results indicated that serum vitamin C levels above 0.95 mg/dL could help prevent rheumatoid arthritis. Increasing dietary vitamin C intake through supplementation was found to raise serum vitamin C levels. There was a significant association between rheumatoid arthritis and serum vitamin C levels, indicating that high levels of serum vitamin C may be a protective factor against rheumatoid arthritis.

Pd@CuInP2S6 Core-Shell Nanospheres with Exceptional Hydrogen Evolution Capability and Stability in Both Alkaline and Acidic Media under Large Current Density Exceeding 1000 mA cm-2.

By combining Pd with 2D layered crystal CuInP2S6 (CIPS) via laser irradiation in liquids, low-loading Pd@CIPS core-shell nanospheres are fabricated as an efficient and robust electrocatalysts for HER in both alkaline and acidic media under large current density (⩾1000 mA cm-2). Pd@CIPS core-shell nanosphere has two structural features, i) the out-shell is the nanocomposite of PdHx and PdInHx, and ii) there is a kind of dendritic structure on the surface of nanospheres, while the dendritic structure porvides good gas desorption pathway and cause the Pd@CIPS system to maintain higher HER activity and stability than that of commercial Pt/C under large current densities. Pd@CIPS exhibits very low overpotentials of -218 and -313 mV for the large current density of 1000 mA cm-2, and has a small Tafel slope of 29 and 63 mV dec-1 in 0.5 m H2SO4 and 1 m KOH condition, respectively. Meanwhile, Pd@CIPS has an excellent stability under -10 and -500 mA cm-2 current densities and 50 000 cycles cyclic voltammetry tests in 0.5 m H2SO4 and 1 m KOH, respectively, which being much superior to that of commercial Pt/C. Density functional theory (DFT) reveals that engineering electronic structure of PdHx and PdInHx nanostructure can strongly weaken the Pd─H bonding.

Gongronella sp. w5 hydrolyzes plant sucrose and releases fructose to recruit phosphate-solubilizing bacteria to provide plants with phosphorus.

The mechanisms of how plant-beneficial rhizospheric fungi interact with the soil microbial community to promote plant growth by facilitating their phosphorus acquisition are poorly understood. This work supported that a Mucoromycotina fungus, Gongronella sp. w5 (w5), could promote phosphorus uptake of Medicago truncatula by increasing the available phosphorus (P) in the soil. The abundance of phosphate-solubilizing bacteria (PSB) and the activity of alkaline phosphatase (ALP) in alfalfa rhizosphere soil increased after w5 inoculation. Further analysis showed that w5 donated a portion of ALP activity and also stimulated the PSB to secrete ALP during plant-w5-PSB interaction to help release more available P in the rhizosphere of M. truncatula. Unlike most plant-beneficial rhizospheric fungi that mainly acquire hexoses from plants, w5 gained sucrose directly from the host plant and then recruited PSB to aid P acquisition by hydrolyzing sucrose and releasing mainly fructose to induce PSB to secrete ALP. IMPORTANCE: This work supported that after absorbing plant sucrose, Gongronella sp. w5 mainly releases sucrose hydrolysis product fructose into the environment. Fructose was used as a carbon source and signaling molecules to induce PSB to co-produce higher alkaline phosphatase activity, releasing soil-available phosphorus and promoting M. truncatula growth. This is the first report that plant-beneficial fungi could directly metabolize sucrose from plants and then recruit PSB to aid P acquisition by providing fructose. Our findings revealed the diversity in pathways of plant-fungi-PSB interactions on soil P acquisition and deepened our understanding of the cooperation of growth-promoting microorganisms in plant rhizosphere.

Diversity of Cellular Slime Molds (Dictyostelids) in the Fanjing Mountain Nature Reserve and Geographical Distribution Comparisons with Other Representative Nature Reserves in Different Climate Zones of China.

Protected areas are widely considered an essential strategy for biodiversity conservation. Dictyostelids are unique protists known to have important ecological functions in promoting soil and plant health through their top-down regulation of ecosystem processes, such as decomposition, that involve bacterial populations. But the relationship between dictyostelid diversity within protected areas remains poorly understood, especially on a large scale. Herein, we report data on the distribution of dictyostelids, identified with ITS + SSU rRNA molecular and morphology-based taxonomy, from soil samples collected in the Fanjing Mountain protected area of Guizhou Province, Southwest China. We compared the biodiversity data of dictyostelids in Fanjing Mountain with similar data from previously sampled sites in four other protected areas, including Changbai Mountain (CB), Gushan Mountain (GS), Baiyun Mountain (BY), and Qinghai-Tibet Plateau (QT) in China. We identified four species of dictyostelids belonging to three genera (Dictyostelium, Heterostelium, and Polysphondylium) and herein provide information on the taxonomy of these species. Two species (Heterostelium pallidum and Dictyostelium purpureum) are common and widely distributed throughout the world, but one species (Polysphondylium fuscans) was new to China. Our data indicate that there is no distinguishable significant correlation between the dictyostelid species studied and environmental factors. Overall, the similarity index between Baiyun Mountain in Henan Province and Fanjing Mountain in Guizhou Province, located at approximately the same longitude, is the highest, and the Jaccard similarity coefficients (Jaccard index) of family, genus, and species are 100%, 100%, and 12.5%, respectively. From a species perspective, species in the same climate zone are not closely related, but obvious geographical distributions are evident in different climate zones. This preliminary study provided evidence of the ecological adaptation of dictyostelids to different biological niches.

Slime molds (Myxomycetes) causing a "disease" in crop plants and cultivated mushrooms.

Myxomycetes (plasmodial slime molds) are eukaryotic protist predators that are associated with wood, leaf litter, and soil in forests, where they feed on bacteria, protozoans, and (to a more limited extent) fungi. The health of crop plants is essential because they represent a primary food source for humans. However, when myxomycetes produce numerous fruiting bodies on the stems and leaves of crop plants, which is herein referred to as a myxomycete colonization, this has the potential of interfering with plant photosynthesis, transpiration and respiration by blocking out light and covering stomata. Myxomycetes are not pathogens, but their occurrence on plants can be mistakenly interpreted as some type of infection. However, this phenomenon has been largely ignored. This paper provides a comprehensive overview of the taxonomic and economic diversity of the organisms involved in myxomycete colonization. In addition, the various types of myxomycete colonization reported in the literature are described and discussed, a number of images provided, and cultural and chemical prevention and control measures are summarized. The latter should be of significant relevance for local production of crops and plant protective stations. While myxomycetes are not pathogens of crop plants, some species can seriously impact commercially grown mushrooms. Reports of myxomycetes affecting mushrooms are also described in this paper.

Biochar immobilized hydrolase degrades PET microplastics and alleviates the disturbance of soil microbial function via modulating nitrogen and phosphorus cycles.

Microplastics (MPs) pose an emerging threat to soil ecological function, yet effective solutions remain limited. This study introduces a novel approach using magnetic biochar immobilized PET hydrolase (MB-LCC-FDS) to degrade soil polyethylene terephthalate microplastics (PET-MPs). MB-LCC-FDS exhibited a 1.68-fold increase in relative activity in aquatic solutions and maintained 58.5 % residual activity after five consecutive cycles. Soil microcosm experiment amended with MB-LCC-FDS observed a 29.6 % weight loss of PET-MPs, converting PET into mono(2-hydroxyethyl) terephthalate (MHET). The generated MHET can subsequently be metabolized by soil microbiota to release terephthalic acid. The introduction of MB-LCC-FDS shifted the functional composition of soil microbiota, increasing the relative abundances of Microbacteriaceae and Skermanella while reducing Arthobacter and Vicinamibacteraceae. Metagenomic analysis revealed that MB-LCC-FDS enhanced nitrogen fixation, P-uptake and transport, and organic-P mineralization in PET-MPs contaminated soil, while weakening the denitrification and nitrification. Structural equation model indicated that changes in soil total carbon and Simpson index, induced by MB-LCC-FDS, were the driving factors for soil carbon and nitrogen transformation. Overall, this study highlights the synergistic role of magnetic biochar-immobilized PET hydrolase and soil microbiota in degrading soil PET-MPs, and enhances our understanding of the microbiome and functional gene responses to PET-MPs and MB-LCC-FDS in soil systems.

Catalyst-Free Activation and Fixation of Nitrogen by Laser-Induced Conversion.

Ultrafast N2 fixation reactions are quite challenging. Currently used methods for N2 fixation are limited, and strong dinitrogen bonds usually need to be activated via extreme temperature or pressure or by the use of an energy-consuming process with sophisticated catalysts. Herein, we report a novel laser-based chemical method for N2 fixation under ambient conditions without catalysts, this method is called laser bubbling in liquids (LBL), and it directly activates N2 in water (H2O) and efficiently converts N2 into valuable NH3 (max: 4.2 mmol h-1) and NO3- (0.17 mmol h-1). Remarkably, the highest yields of NH3 and NO3- are 4 orders of magnitude greater than the best values for electrocatalysis reported to date. Notably, we further validate the experimental mechanism by using optical emission spectroscopy to detect the production of intermediate plasma and by employing isotope tracing. We also establish that an extremely high-temperature environment far from thermodynamic equilibrium inside a laser-induced bubble and the kinetic process of rapid quenching of bubbles is crucial for N2 activation and fixation to generate NH3 and NOx via LBL. Based on these results, it is shown that LBL is a simple, safe, efficient, green, and sustainable technology that enables the rapid conversion of the renewable feedstocks H2O and N2 to NH3 and NO3-, facilitating new prospects for chemical N2 fixation.

The effect of ultrasonic power on the physicochemical properties and antioxidant activities of frosted figs pectin.

Ultrasound has been widely used in industry due to its high energy and efficiency. This study optimized the ultrasonic-assisted extraction (UAE) process of frosted figs pectin (FFP) using response surface methodology (RSM), and further investigated the effect of ultrasonic power on the structural characteristics and antioxidant activities of FFPs. The UAE method of FFP through RSM was optimized, and the optimal extraction process conditions, particle size of 100 mesh, pH value of 1.95, liquid-solid ratio of 47:1 (mL/g), extraction temperature of 50 °C and extraction time of 65 min, were obtained. The extraction rate of FFP under this condition was 37.97 ± 2.56 %. Then, the four FFPs modified by ultrasound were obtained by changing the ultrasonic power. Research had found that ultrasonic power had little effect on the monosaccharide composition, Zeta potential, as well as the thermal stability and appearance structure of the four FFPs. However, ultrasonic power had a significant impact on other properties of FFP: as the ultrasonic power increased, the DM% and particle size decreased continuously, while the total carbohydrate content increased. Meanwhile, ultrasonic power also had a significant impact on antioxidant activities of FFPs. From the research results, it could be seen that different ultrasonic power had certain changes in its spatial structure and properties, and the structural changes also affected the biological activity of FFP. The study of the effects of ultrasonic power on the physicochemical properties and biological activity of FFP lays the foundation for the development and application of FFP in food additives and natural drug carriers.