RESUMO
Piezotronic effect utilizing strain-induced piezoelectric polarization to achieve interfacial engineering in semiconductor nanodevices exhibits great advantages in applications such as human-machine interfacing, micro/nanoelectromechanical systems, and next-generation sensors and transducers. However, it is a big challenge but highly desired to develop a highly sensitive piezotronic device based on piezoelectric semiconductor wafers and thus to push piezotronics toward wafer-scale applications. Here, we develop a bicrystal barrier-based piezotronic transistor for highly sensitive pressure sensing by p-GaN single-crystal wafers. Its pressure sensitivity can be as high as 19.83 meV/MPa, which is more than 15 times higher than previous bulk-material-based piezotronic transistors and reaches the level of nanomaterial-based piezotronic transistors. Moreover, it can respond to a very small strain of 3.3 × 10-6 to 1.1 × 10-5 with high gauge factors of 1.45 × 105 to 1.38 × 106, which is a very high value among various strain sensors. Additionally, it also exhibits high stability (current stability of 97.32 ± 2.05% and barrier height change stability of 95.85 ± 3.43%) and high linearity (R2 â¼ 0.997 ± 0.002) in pressure sensing. This work proves the possibility of designing a bicrystal barrier as the interface to obtain a strong piezotronic effect and highly sensitive piezotronic devices based on wafers, which contributes to their applications.
RESUMO
Investigating interface engineering by piezoelectric, flexoelectric and ferroelectric polarizations in semiconductor devices is important for their applications in electronics, optoelectronics, catalysis and many more. The interface engineering by polarizations strongly depends on the property of interface barrier. However, the fixed value and uncontrollability of interface barrier once it is constructed limit the performance and application scenarios of interface engineering by polarizations. Here, we report a strategy of tuning piezotronic effect (interface barrier and transport controlled by piezoelectric polarization) reversibly and accurately by electric pulse. Our results show that for Ag/HfO2/n-ZnO piezotronic tunneling junction, the interface barrier height can be reversibly tuned as high as 168.11 meV by electric pulse, and the strain (0-1.34) modulated current range by piezotronic effect can be switched from 0-18 nA to 44-72 nA. Moreover, piezotronic modification on interface barrier tuned by electric pulse can be up to 148.81 meV under a strain of 1.34, which can totally switch the piezotronic performance of the electronics. This study provides opportunities to achieve reversible control of piezotronics, and extend them to a wider range of scenarios and be better suitable for micro/nano-electromechanical systems.
RESUMO
Triboelectric nanogenerators (TENGs) are of great significance as sustainable power sources that harvest energy from the human body and environment. Nevertheless, due to TENG's impedance-dependent output voltage characteristics, in traditional strategy (TS), real-timely powering a sensor with TENG has a poor sensing on/off ratio (or response), and directly charging a capacitor with TENG shows a low charging efficiency. This degraded real-time powering and charging performance of TENG compared to a commercial constant voltage source is a huge challenge of the TENG field for a long time. This work proposes a synchronous switching strategy (SSS) for TENG to real-timely power sensors or charge capacitors without degrading its performance. Compared with TS, this new strategy enables sensors to have 5-7 times sensing on/off ratio enhancement when using TENG as a power source, reaching the powering ability of a commercial constant voltage source, it makes the powering performance of TENG stable under different driving frequency, improving the powering robustness of TENG. In addition, compared with TS, SSS can also enhance the charging efficiency of TENG in every charging cycle by up to 2.4 times when charging capacitors. This work contributes to real-timely powering or charging the distributed, mobile and wireless electronics using TENG.
RESUMO
Mechanical sensors are mainly divided into two types (vertical force sensing and lateral strain sensing). Up to now, one sensor with two working modes is still a challenge. Here, we demonstrate a structural design concept combing a piezoelectric nano/microwire with a flexible polymer with protrusions that enables a dual-modal piezotronic transistor (DPT) with two working modes for highly sensitive vertical force sensing and lateral strain sensing. For vertical force sensing, DPT exhibits a force sensitivity up to 221.5 N-1 and a minimum identifiable force down to 21 mN, corresponding to a pressure sensitivity of 1.759 eV/MPa. For lateral strain sensing, DPT can respond to a large compression strain (~5.8%) with an on/off ratio up to 386.57 and a gauge factor up to 8988.6. It is a universal design that can integrate vertical force sensing and lateral strain sensing into only one nanodevice, providing a feasible strategy for multimodal devices.
RESUMO
Catalysis is vitally important for chemical engineering, energy, and environment. It is critical to discover new mechanisms for efficient catalysis. For piezoelectric/pyroelectric/ferroelectric materials that have a non-centrosymmetric structure, interfacial polarization-induced redox reactions at surfaces leads to advanced mechanocatalysis. Here, the first flexocatalysis for 2D centrosymmetric semiconductors, such as MnO2 nanosheets, is demonstrated largely expanding the polarization-based-mechanocatalysis to 2D centrosymmetric materials. Under ultrasonic excitation, the reactive species are created due to the strain-gradient-induced flexoelectric polarization in MnO2 nanosheets composed nanoflowers. The organic pollutants (Methylene Blue et al.) can be effectively degraded within 5 min; the performance of the flexocatalysis is comparable to that of state-of-the-art piezocatalysis, with excellent stability and reproducibility. Moreover, the factors related to flexocatalysis such as material morphology, adsorption, mechanical vibration intensity, and temperature are explored, which give deep insights into the mechanocatalysis. This study opens the field of flexoelectric effect-based mechanochemistry in 2D centrosymmetric semiconductors.
RESUMO
Piezotronics with capacity of constructing adaptive and seamless interactions between electronics/machines and human/ambient are of value in Internet of Things, artificial intelligence and biomedical engineering. Here, we report a kind of highly sensitive strain sensor based on piezotronic tunneling junction (Ag/HfO2/n-ZnO), which utilizes the strain-induced piezoelectric potential to control the tunneling barrier height and width in parallel, and hence to synergistically modulate the electrical transport process. The piezotronic tunneling strain sensor has a high on/off ratio of 478.4 and high gauge factor of 4.8 × 105 at the strain of 0.10%, which is more than 17.8 times larger than that of a conventional Schottky-barrier based strain sensor in control group as well as some existing ZnO nanowire or nanobelt based sensors. This work provides in-depth understanding for the basic mechanism of piezotronic modulation on tunneling junction, and realizes the highly sensitive strain sensor of piezotronic tunneling junction on device scale, which has great potential in advanced micro/nano-electromechanical devices and systems.
RESUMO
Soft robotic hands provide better safety and adaptability than rigid robotic hands. Furthermore, a multijointed structure that imitates the movement of a human hand represents significant progress in realizing its anthropomorphism. In this study, we present a multijointed pneumatic soft anthropomorphic hand that is capable of expressing letters through sign language and grasping different objects using three grasping modes, namely thumb grasping, precision grasping, and power grasping. This novel soft hand is composed of multijointed soft fingers, a thumb, thenar, and 3D-printed palm. Tests were performed to characterize the displacement track and force performance of the fingers, thumb, and thenar, which was made by mold casting silicone rubber. In addition, a dedicated pneumatic control system was designed and built to enable the soft hand to automatically perform the tasks set by specific programs. This new multijointed hand with a flexible thenar represents significant progress in the development of anthropomorphic bionic hands, offering the benefits of fast response, low cost, as well as ease of fabrication, assembly, and replacement.
Assuntos
Força da Mão , Mãos , Dedos/fisiologia , Mãos/fisiologia , Força da Mão/fisiologia , Humanos , Polegar/fisiologia , Extremidade SuperiorRESUMO
As an important way of converting mechanical energy into electric energy, a piezoelectric nanogenerator (PENG) has been widely applied in energy harvesting as well as self-powered sensors in recent years. However, its robustness and durability are still severely challenged by frequent and inevitable mechanical impacts in real application environments. Herein, a fully self-healing PENG (FS-PENG) as a self-powered pressure sensing electronic skin is reported. The self-healing piezoelectric composite and self-healing Ag NW electrode fabricated through mixing piezoelectric PZT particles and conductive Ag NWs into self-healing polydimethylsiloxane (H-PDMS) are assembled into the sandwich structure FS-PENG. The FS-PENG could not only effectively convert external stimulation into electrical signals with a linear response to the pressure but also retain the excellent self-healing and stable sensing property after multiple cycles of cutting and self-healing process. Moreover, a self-healing pressure sensor array composed of 9 FS-PENGs was attached on the back of the human hand to mimic the human skin, and accurate monitoring of the spatial position distribution and magnitude of the pressure was successfully realized.
RESUMO
Interface engineering by local polarization using piezoelectric1-4, pyroelectric5,6 and ferroelectric7-9 effects has attracted considerable attention as a promising approach for tunable electronics/optoelectronics, human-machine interfacing and artificial intelligence. However, this approach has mainly been applied to non-centrosymmetric semiconductors, such as wurtzite-structured ZnO and GaN, limiting its practical applications. Here we demonstrate an electronic regulation mechanism, the flexoelectronics, which is applicable to any semiconductor type, expanding flexoelectricity10-13 to conventional semiconductors such as Si, Ge and GaAs. The inner-crystal polarization potential generated by the flexoelectric field serving as a 'gate' can be used to modulate the metal-semiconductor interface Schottky barrier and further tune charge-carrier transport. We observe a giant flexoelectronic effect in bulk centrosymmetric semiconductors of Si, TiO2 and Nb-SrTiO3 with high strain sensitivity (>2,650), largely outperforming state-of-the-art Si-nanowire strain sensors and even piezoresistive, piezoelectric and ferroelectric nanodevices14. The effect can be used to mechanically switch the electronics in the nanoscale with fast response (<4 ms) and high resolution (~0.78 nm). This opens up the possibility of realizing strain-modulated electronics in centrosymmetric semiconductors, paving the way for local polarization field-controlled electronics and high-performance electromechanical applications.
RESUMO
Harvesting energy from the surrounding environment, particularly from human body motions, is an effective way to provide sustainable electricity for low-power mobile and portable electronics. To get adapted to the human body and its motions, we report a new fiber-based triboelectric nanogenerator (FTNG) with a coaxial double helix structure, which is appropriate for collecting mechanical energy in different forms. With a small displacement (10 mm at 1.8 Hz), this FTNG could output 850.20 mV voltage and 0.66 mA m-2 current density in the lateral sliding mode, or 2.15 V voltage and 1.42 mA m-2 current density in the vertical separating mode. Applications onto the human body are also demonstrated: the output of 6 V and 600 nA (3 V and 300 nA) could be achieved when the FTNG was attached to a cloth (wore on a wrist). The output of FTNG was maintained after washing or long-time working. This FTNG is highly adaptable to the human body and has the potential to be a promising mobile and portable power supply for wearable electronic devices.
RESUMO
Tunneling junction is used in many devices such as high-frequency oscillators, nonvolatile memories, and magnetic field sensors. In these devices, modulation on the barrier width and/or height is usually realized by electric field or magnetic field. Here, a new piezotronic tunneling junction (PTJ) principle, in which the quantum tunneling is controlled/tuned by externally applied mechanical stimuli, is proposed. In these metal/insulator/piezoelectric semiconductor PTJs, such as Pt/Al2 O3 /p-GaN, the height and the width of the tunneling barriers can be mechanically modulated via the piezotronic effect. The tunneling current characteristics of PTJs exhibit critical behavior as a function of external mechanical stimuli, which results in high sensitivity (≈5.59 mV MPa-1 ), giant switching (>105 ), and fast response (≈4.38 ms). Moreover, the mechanical controlling of tunneling transport in PTJs with various thickness of Al2 O3 is systematically investigated. The high performance observed with these metal/insulator/piezoelectric semiconductor PTJs suggest their great potential in electromechanical technology. This study not only demonstrates dynamic mechanical controlling of quantum tunneling, but also paves a way for adaptive interaction between quantum tunneling and mechanical stimuli, with potential applications in the field of ultrasensitive press sensor, human-machine interface, and artificial intelligence.
RESUMO
Personal electronic devices have a general development trend of miniaturization, functionality, and wearability. Their wireless, sustainable, and independent operation is critically important, which requests new power technologies that can harvest the ambient environmental energy. Here, we report a new kind of 2D woven wearable triboelectric nanogenerator (2DW-WTNG) composed of core-shell fibers via the twisting process and weaving process in the textile manufacture. The 2DW-WTNG can convert the body motion energy into electricity with an output current of 575 nA and an output voltage of 6.35 V. At an external load of 50 MΩ, it generated a maximum power density of 2.33 mW/m2. Electricity can be produced from the 2DW-WTNG driven in arbitrary in-plane directions. A tiny displacement of 0.4 mm can drive the 2DW-WTNG, which verified its capability to harvest energy from small human movement. The robust 2DW-WTNG can work continuously for 12 h without obvious performance degradation.
RESUMO
Piezoelectric materials are important for many physical and electronic devices. Although many piezoelectric ceramics exhibit good piezoelectricity, they often show poor compatibility with biological systems that limits their biomedical applications. Piezoelectric peptide and metabolite materials benefit from their intrinsic biocompatibility, degradability, and convenient biofunctionalization and are promising candidates for biological and medical applications. Herein, we provide an account of the recent progress of research works on piezoelectric peptide and metabolite materials. This review focuses on the growth mechanism of peptide and metabolite micro- and nanomaterials. The influence of self-assembly processes on their piezoelectricity is discussed. Peptide and metabolite materials demonstrate not only outstanding piezoelectric properties but also unique electronic, optical, and physical properties, enabling their applications in nanogenerators, sensors, and optical waveguiding devices.
RESUMO
Ceramic materials possessing the properties of high-strength and rigidity are widely used in industry. The shell nacre has a layered structure containing both macroscopic and microscopic levels and is equipped with superior qualities regarding hardness and strength. Therefore, the ceramic composites with a nacre-like layered structure have the potential to be utilized as sliding bearings employed in the harsh conditions of wells. For the purpose of this paper, a porous Al2O3 ceramics skeleton with nanometer powder is prepared using the freeze-casting method. Then the porous ceramic skeleton is filled with polymer polymethyl methacrylate (PMMA) through mass polymerization to produce a bionic Al2O3/PMMA composite with a lamellar structure. The properties of the prepared composite are determined by the analysis of micro-hardness, fracture toughness, friction coefficient, wear scar diameter, and the morphology of the worn surface. Consequent results indicate that elevation in the A12O3 powder, which acts as the initial solid phase content, prompts the ceramic slurry to exhibit an increase in viscosity and a gradual decrease in the pore size of the ceramic skeleton. The prepared layered Al2O3/PMMA composite possesses high fracture toughness, which closely resembles that of Al, is approximately four times that of the matrix of the Al2O3 ceramics and 16 times that of the PMMA. Three kinds of composites containing different solid phase content are subjected to testing involving lubrication by water-based drilling fluid to determine the friction coefficient of each. The results indicate that an increased load leads to a decreased friction coefficient while the impact of speed is not evident. Under dry conditions, the friction coefficient of three different composites tested, declines with elevated load and speed. With the use of water-based drilling fluid as lubrication, the wear scar diameter increases at higher speed, while dry conditions denote increased load. Abrasive wear is determined to be the principal form of erosion of layered Al2O3/PMMA composites.
RESUMO
Piezoelectric materials have been widely used for sensors, actuators, electronics, and energy conversion. Two-dimensional (2D) ultrathin semiconductors, such as monolayer h-BN and MoS2 with their atom-level geometry, are currently emerging as new and attractive members of the piezoelectric family. However, their piezoelectric polarization is commonly limited to the in-plane direction of odd-number ultrathin layers, largely restricting their application in integrated nanoelectromechanical systems. Recently, theoretical calculations have predicted the existence of out-of-plane and in-plane piezoelectricity in monolayer α-In2Se3. Here, we experimentally report the coexistence of out-of-plane and in-plane piezoelectricity in monolayer to bulk α-In2Se3, attributed to their noncentrosymmetry originating from the hexagonal stacking. Specifically, the corresponding d33 piezoelectric coefficient of α-In2Se3 increases from 0.34 pm/V (monolayer) to 5.6 pm/V (bulk) without any odd-even effect. In addition, we also demonstrate a type of α-In2Se3-based flexible piezoelectric nanogenerator as an energy-harvesting cell and electronic skin. The out-of-plane and in-plane piezoelectricity in α-In2Se3 flakes offers an opportunity to enable both directional and nondirectional piezoelectric devices to be applicable for self-powered systems and adaptive and strain-tunable electronics/optoelectronics.
RESUMO
Because silicon transistors are rapidly approaching their scaling limit due to short-channel effects, alternative technologies are urgently needed for next-generation electronics. Here, we demonstrate ultrathin ZnO piezotronic transistors with a â¼2 nm channel length using inner-crystal self-generated out-of-plane piezopotential as the gate voltage to control the carrier transport. This design removes the need for external gate electrodes that are challenging at nanometer scale. These ultrathin devices exhibit a strong piezotronic effect and excellent pressure-switching characteristics. By directly converting mechanical drives into electrical control signals, ultrathin piezotronic devices could be used as active nanodevices to construct the next generation of electromechanical devices for human-machine interfacing, energy harvesting, and self-powered nanosystems.
RESUMO
Piezotronic transistors (PTs) that utilize inner crystal potential generated by interface piezoelectric polarization charges as the gate voltage have great potential applications in force/pressure-triggered or controlled electronic devices, sensors, human-machine communication, and microelectromechanical systems. Although the performance of PTs has been partially enhanced by exploring special materials with different geometries or high piezoelectricity, few studies have been focused on the structure design of PT itself to more effectively enhance the performance and structural reliability. Here, an integrated double-channel plane piezotronic transistor is invented as a high-performance pressure-sensing technology. Owing to the double-channel modulation and the plane structure, the PT has the merits of high pressure sensitivity (84.2-104.4 meV/MPa) and high structural reliability, which provides the opportunity for great applications, such as human-computer interfacing, biosensing, and health monitoring.
RESUMO
High sensitivity of pressure/strain sensors is the key to accurately evaluating external mechanical stimuli and could become more important in future generations of human-machine interfaces and artificial skin. Here we report the study of a two-terminal piezotronic transistor based on ZnO twin nanoplatelets (TNPT). Owing to the mirror symmetrical structure of ZnO twin nanplatelet, compressive pressure-induced positive piezoelectric polarization charges created at both metal-semiconductor interfaces can simultaneously lower both Schottky barrier heights and thus significantly modulate the carrier transport. Our device exhibits the highest pressure sensitivity of 1448.08-1677.53 meV/MPa, which is more than â¼20 times larger than the highest value reported previously, and a fast response time of <5 ms. In addition, it can be used as a photodector with an ultrahigh external photoresponsivity of â¼1.45 × 104 AW-1, which is â¼105 times larger in magnitude than that of commercial UV photodetectors. The coupling between the mirror symmetrical structure and strong piezotronic effect in ZnO twin nanoplatelets may enable the development of ultrasensitive pressure/strain sensors for various applications such as artificial skin, health monitoring, and adaptive biomedical probes.
Assuntos
Nanoestruturas/química , Nanotecnologia/instrumentação , Óxido de Zinco/química , Ondas de Choque de Alta Energia/uso terapêutico , Humanos , Metais/química , Nanofios , Pressão , SemicondutoresRESUMO
In this paper, a new kind of 2D piezotronic transistor (PT) with the highest sensitivity till date has been designed and demonstrated, and the 2DPT array with ultrahigh spatial resolution has been developed through assembling ZnO nanoplatelets into ordered nanoplatelet array. As active sensors by directly converting applied mechanical actuations into electrical control signals without applying gate voltage, the ZnO 2DPT array has a great advantage as a fundamental component of piezotronics. The 2DPT array paves the way for a large-scale and integrated production of two terminal vertical transistors, which will contribute to its application in many fields such as human-machine interfacing, smart sensor, and processor systems.
RESUMO
Effective piezoelectric semiconductor based hybrid photocatalysts are successfully developed by assembling TiO2 nanoparticles on ZnO monocrystalline nanoplatelets. The piezopotential can be introduced and tuned by thermal stress on the piezoelectric material of ZnO monocrystalline nanoplatelets through cooling hybrid photocatalysts from high temperature to room temperature with different rates based on the mismatched thermal expansion coefficient of the two materials, which can be used to engineer the heterojunction band structure and significantly enhance the photocatalytic performance in a wide range by improving charge separation. It is proposed that the piezotronic effect enhanced photocatalyst will provide a strategy for high-performance photocatalysis applications.