RESUMO
The competition between on-site electronic correlation and local crystal field stands out as a captivating topic in research. However, its physical ramifications often get overshadowed by influences of strong periodic potential and orbital hybridization. The present study reveals this competition may become more pronounced or even dominant in two-dimensional systems, driven by the combined effects of dimensional confinement and orbital anisotropy. This leads to electronic orbital reconstruction in certain perovskite superlattices or thin films. To explore the emerging physics, we investigate the interfacial orbital disorder-order transition with an effective Hamiltonian and how to modulate this transition through strains.
RESUMO
The ternary alloy CdSxSe1-xcombines the physical properties of CdS and CdSe, and its band gap can be adjusted by changing the element composition. The alloy has charming photoelectric properties as well as potential application value in photoelectric devices. In this work, the CdS/CdS0.42Se0.58nanobelt (NB) heterojunction device was prepared by chemical vapor deposition combined with a typical dry transfer technique. The heterojunction photodetector shows high light switching ratio of 6.79 × 104, large spectral responsivity of 1260 A W-1, high external quantum efficiency of 2.66 × 105% and large detectivity of 7.19 × 1015cm Hz1/2W-1under 590 nm illumination and 3 V bias. Its rise and decay time is about 45/90µs. The performance of the heterojunction photodetector was comparable or even better than that of other CdS(Se) based photodetector device. The results indicate that the CdS/CdS0.42Se0.58NB heterojunction possesses a promising potential application in high performance photodetectors.
RESUMO
Lithium-ion batteries are widely used in modern society. Accurate modeling and prognosis are fundamental to achieving reliable operation of lithium-ion batteries. Accurately predicting the end-of-discharge (EOD) is critical for operations and decision-making when they are deployed to critical missions. Existing data-driven methods have large model parameters, which require a large amount of labeled data and the models are not interpretable. Model-based methods need to know many parameters related to battery design, and the models are difficult to solve. To bridge these gaps, this study proposes a physics-informed neural network (PINN), called battery neural network (BattNN), for battery modeling and prognosis. Specifically, we propose to design the structure of BattNN based on the equivalent circuit model (ECM). Therefore, the entire BattNN is completely constrained by physics. Its forward propagation process follows the physical laws, and the model is inherently interpretable. To validate the proposed method, we conduct the discharge experiments under random loading profiles and develop our dataset. Analysis and experiments show that the proposed BattNN only needs approximately 30 samples for training, and the average required training time is 21.5 s. Experimental results on three datasets show that our method can achieve high prediction accuracy with only a few learnable parameters. Compared with other neural networks, the prediction MAEs of our BattNN are reduced by 77.1%, 67.4%, and 75.0% on three datasets, respectively. Our data and code will be available at: https://github.com/wang-fujin/BattNN.
RESUMO
Bi2WO6 flower-like materials (FMs) were prepared by a hydrothermal method, followed by an in-situ reduction method to prepare Au@Bi2WO6 FMs. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy were employed to characterize the samples. It was discovered that the calculated OV content of Au@Bi2WO6 FMs is 25.16% whereas that of Bi2WO6 FMs is 20.81%, offering appropriate active sites for the absorption of gases and thus enhancing outstanding sensing property. Moreover, the detection of volatile and hazardous substances such as formaldehyde, methanol, acetone, benzene, toluene, and xylene was carried out to assess the efficacy of the Au@Bi2WO6 FMs sensors. The optimal operating temperatures for the Bi2WO6 FMs and Au@Bi2WO6 FMs sensors were 290 and 260 °C, respectively. Compared with Au@Bi2WO6 FMs sensor and Bi2WO6 FMs one, the best response of the front was 250 (900)-100 (800) ppm formaldehyde whereas that of the latter was 90 (230). Therefore, Au@ Bi2WO6 FMs have good response and selectivity, which are promising candidates for formaldehyde detection.
RESUMO
Ni-doped ZnO nanowire arrays (Ni-ZnO NRs) with different Ni concentrations are grown on etched fluorine-doped tin oxide electrodes by the hydrothermal method. The Ni-ZnO NRs with a nickel precursor concentration of 0-12 at. % are adjusted to improve the selectivity and response of the devices. The NRs' morphology and microstructure are investigated by scanning electron microscopy and high-resolution transmission electron microscopy. The sensitive property of the Ni-ZnO NRs is measured. It is found that the Ni-ZnO NRs with an 8 at. % Ni precursor concentration have high selectivity for H2S and a large response of 68.9 at 250 °C compared to other gases including ethanol, acetone, toluene, and nitrogen dioxide. Their response/recovery time is 75/54 s. The sensing mechanism is discussed in terms of doping concentration, optimum operating temperature, gas type, and gas concentration. The enhanced performance is related to the regularity degree of the array and the doped Ni3+ and Ni2+ ions, which increases the active sites for oxygen and target gas adsorption on the surface.
RESUMO
During acute wound (AW) healing, a series of proper communications will occur between different epidermal cells at precise temporal stages to restore the integrity of the skin. However, it is still unclear what variation happened in epidermal cell interaction in the chronic wound environment. To provide new insights into chronic wound healing, we reconstructed the variations in the epidermal cell-cell communication network that occur in chronic wound healing via single-cell RNA-seq (scRNA-seq) data analysis. We found that the intricate cellular and molecular interactions increased in pressure ulcer (PU) compared to AW, especially the PARs signaling pathways were significantly upregulated. It shows that the PARs signaling pathways' main source was melanocytes and the CTSG-F2RL1 ligand-receptor pairs were its main contributor. Cathepsin G (CatG or CTSG) is a serine protease mainly with trypsin- and chymotrypsin-like specificity. It is synthesized and secreted by some immune or non-immune cells. Whereas, it has not been reported that melanocytes can synthesize and secrete the CTSG. F2R Like Trypsin Receptor 1 (F2RL1) is a member of proteinase-activated receptors (PARs) that are irreversibly activated by proteolytic cleavage and its stimulation can promote inflammation and inflammatory cell infiltration. In this study, we found that melanocytes increased in pressure ulcers, melanocytes can synthesize and secrete the CTSG and may promote inflammation in chronic wounds through CTSG-F2RL1 pairs, which may be a novel potential target and a therapeutic strategy in the treatment of chronic wounds.
RESUMO
With the continuous improvement in material life, people are paying more and more attention to air quality; therefore, it is critical to design efficient and stable gas sensor devices. In this work, a flowery WSe2 nanostructure and its nanocomposite (Au@WSe2) decorated with Au nanoparticles were fabricated by the hydrothermal method. The performance of a resistive sensor with flowery WSe2 and Au@WSe2 sensors was evaluated by detecting volatile organic compounds such as ethanol, isoamylol, n-butyl alcohol, isopropanol, isobutanol and n-propanol. The results show that Au-nanoparticle-decorated flowery WSe2 can decrease the optimal working temperature from 215 °C to 205 °C and significantly enhance the response of flowery WSe2. The response values to isoamylol are the highest (as high as 44.5) at a low gas concentration (100 ppm), while the response values to ethanol are the highest (as high as 178.5) at a high gas concentration (1000 ppm) among the six different alcohols. Moreover, the response is steady and repeatable. The results demonstrate that the Au@WSe2 substrate has good responsiveness and selectivity, which makes it a promising candidate for gas detection.
RESUMO
We correct two errors in our publication [Appl. Opt.60, 8896 (2021)APOPAI0003-693510.1364/AO.437478].
RESUMO
For real-application gas sensors, high performances (response, selectivity, response/recovery time and stability) are demanded. An effective strategy is applying nanomaterials in gas sensors. In this study, the anatase TiO2 flower-like nanomaterials (FLNMs) are prepared through a one-step hydrothermal method which exhibit high-performance toward acetone vapor. TiO2 FLNMs sensors property are characterized at optimal working temperature of 330 °C with selectivity (acetone), response (S = 33.72 toward 250 ppm acetone), linear dependence (R2 = 0.9913), response/recovery time (46/24 s toward 250 ppm acetone) and long-term stability (30 days). These demonstrate that TiO2 FLNMs get a high performance for acetone sensor. Moreover, the limit of detection of acetone is 0.65 ppm which is lower than that of exhaled air for diabetes (0.8 ppm), indicating that TiO2 FLNMs gas sensor gets potential application in medical diagnosis.
RESUMO
TiO2 flower like nanomaterials (FLNMs) are fabricated via a hydrothermal method and Ag nanoparticles (NPs) are deposited via electron beam evaporation. Several biological pigments (CV, R6G and RhB) are selected as target molecules to investigate their surface enhanced Raman scattering (SERS) property. The results demonstrate ultrasensitivity and high reproducibility. They reveal that the limit of detection (LOD) is 4.17 × 10-16 M and the enhancement factor (EF) is 2.87 × 1010 for CV, and the LOD is 5.01 × 10-16 M and 7.94 × 10-14 M for R6G and RhB, respectively. To assess the reproducibility on TiO2/Ag FLNMs SERS substrates, they are tested with 1.0 × 10-13 M of CV, 1.0 × 10-13 M of R6G and 1.0 × 10-11 M of RhB, respectively. The relative standard deviations (RSD) are less than 12.93%, 13.52% and 11.74% for CV, R6G and RhB, respectively. In addition, we carry out melamine detection and the LOD is up to 7.41 × 10-10 M, which is over 1000 times lower than the severest standards in the world. Therefore, the obtained TiO2 FLNMs have potential application in detecting illegal food additives.
RESUMO
Developing high-performance electrode materials is in high demand for the development of supercapacitors. Herein, defect and interface engineering has been simultaneously realized in NiMoO4 nanowire arrays (NWAs) using a simple sucrose coating followed by an annealing process. The resultant hierarchical oxygen-deficient NiMoO4@C NWAs (denoted as "NiMoO4-x@C") are grown directly on conductive ferronickel foam substrates. This composite affords direct electrical contact with the substrates and directional electron transport, as well as short ionic diffusion pathways. Furthermore, the coating of the amorphous carbon shell and the introduction of oxygen vacancies effectively enhance the electrical conductivity of NiMoO4. In addition, the coated carbon layer improves the structural stability of the NiMoO4 in the whole charging and discharging process, significantly enhancing the cycling stability of the electrode. Consequently, the NiMoO4-x@C electrode delivers a high areal capacitance of 2.24 F cm-2 (1720 F g-1) at a current density of 1 mA cm-2 and superior cycling stability of 84.5% retention after 6000 cycles at 20 mA cm-2. Furthermore, an asymmetric super-capacitor device (ASC) has been constructed with NiMoO4-x@C as the positive electrode and activated carbon (AC) as the negative electrode. The as-assembled ASC device shows excellent electrochemical performance with a high energy density of 51.6 W h kg-1 at a power density of 203.95 W kg-1. Moreover, the NiMoO4//AC ASC device manifests remarkable cyclability with 84.5% of capacitance retention over 6000 cycles. The results demonstrate that the NiMoO4-x@C composite is a promising material for electrochemical energy storage. This work can give new insights on the design and development of novel functional electrode materials via defect and interface engineering through simple yet effective chemical routes.
RESUMO
Flavanols, a common class of secondary plant metabolites, exhibit several beneficial health properties by acting as antioxidant, anticarcinogen, cardioprotective, anti-microbial, anti-viral, and neuroprotective agents. Furthermore, some flavanols are considered functional ingredients in dairy products. Based on their structural features and health-promoting functions, flavanols have gained the attention of pharmacologists and botanists worldwide. This review collects and summarizes 121 flavanols comprising four categories: flavan-3-ols, flavan-4-ols, isoflavan-4-ols, and flavan-3,4-ols. The research of the various structural features and pharmacological activities of flavanols and their derivatives aims to lay the groundwork for subsequent research and expect to provide mentality and inspiration for the research. The current study provides a starting point for further research and development.
Assuntos
Anti-Infecciosos/farmacologia , Antioxidantes/farmacologia , Produtos Biológicos/farmacologia , Cardiotônicos/farmacologia , Flavonoides/farmacologia , Fármacos Neuroprotetores/farmacologia , Compostos Fitoquímicos/farmacologia , HumanosRESUMO
Hybrid CdS/MoS2 with branch and leaf shaped structures are successfully synthesized by hydrothermal method. It is applied to detect volatile organic compounds, a basic source of indoor air pollution with deleterious effects on the human health. The sensor based on CdS/MoS2 displays an outstanding response to alcohols among numerous gases. Their response to 100 ppm ethanol and isopropanol reaches 56 and 94, respectively. Benefiting from the dendrite-like biomimetic structure and synergy effect of CdS and MoS2, the sensor exhibits higher response than traditional gas sensor. For multiple alcohols, the limit of detection reached ppb level. In addition, by comparing the response of ethanol, isopropanol, isoamyl alcohol and their mixtures with acetone and methanal, a strong resistance interference is observed. This work proved that the modified detector holds broad promise in the detection of alcohols.
RESUMO
Cadmium sulfide micrometer hollow spheres (CdS MHs) were fabricated by a hydrothermal method. The performance of the CdS MHs sensor was evaluated by detecting volatile organic compounds such as methanol, ethanol, 1-propanol, isopropanol, n-butanol, iso-butyl alcohol, iso-amyl alcohol, acetone, and xylene. It was found that the optimum working temperature of the CdS MHs sensor is 190 °C. The response of the CdS MHs can reach 27.4-100 ppm ethanol and reach 84.55-100 ppm isopropanol. Comparing the response to pure 5 ppm isopropanol (iso-amyl alcohol) with the mixture of 5 ppm isopropanol (iso-amyl alcohol) and 50 ppm acetone or 5 ppm isopropanol (iso-amyl alcohol) and 50 ppm methanol, the relative deviation was -1.33% (-7.11%) or -6.19% (9.20%). It suggested that the CdS MHs sensor had a strong anti-interference ability to methanol and acetone and is suitable for detecting alcohols except methanol. Therefore, the CdS MHs sensor had good response and is a promising alcohol detection material.
RESUMO
The sinus tract of the ischial tuberosity is often caused by pressure injury. It has the characteristics of difficult treatment and high cost, which increases the anxiety of patients and reduces the quality of life of patients. This case report is to describe an effective method to treat sinus wound at the ischial tuberosity. A 53-year-old male suffered pressure ulcer with sinus wound at the left ischial tuberosity due to inadequate walking and sedentary activity. On the basis of pressure relief and immobilization, the patient was treated with CO2 laser debridement and negative pressure wound therapy under endoscope support 3 times, the deep of the sinus wound was completely closed, and then the residual superficial wound was treated by skin grafting. Follow-up of 1 year after healing showed no recurrence of wound.
Assuntos
Tratamento de Ferimentos com Pressão Negativa , Úlcera por Pressão , Dióxido de Carbono , Desbridamento , Humanos , Lasers , Masculino , Pessoa de Meia-Idade , Úlcera por Pressão/etiologia , Úlcera por Pressão/cirurgia , Qualidade de Vida , Resultado do TratamentoRESUMO
The purpose of this study was to investigate the clinical efficacy of compound polymyxin B ointment for treating chronic refractory wounds. A retrospective analysis was performed on 111 patients who underwent chronic refractory wound treatment. Patients were divided into 2 groups, with 45 patients included in the experimental group (compound polymyxin B group) and 66 patients included in the control group (silver sulfadiazine group). After thorough debridement in both groups, either compound polymyxin B ointment or silver sulfadiazine cream was evenly applied to the patient's wound and covered with sterile gauze. In both groups, dressing changes were dependent on the wound's condition and secretions. Using the Bates-Jensen Wound Assessment Tool (BWAT), patients in both groups were scored, after which wound healing, infection, and healing time were compared. There was no significant difference in BWAT scores between the 2 groups on the 7th or 14th day; however, on the 21st day, the BWAT score in the experimental group was significantly lower than that of the control group. The difference was statistically significant (P < .05). There was no significant difference in the BWAT-I scores between the 2 groups on the seventh day. The healing time in the experimental group was significantly shorter than that of the control group, and the difference was statistically significant (P < .05). For the treatment of chronic refractory wounds, thorough debridement followed by compound polymyxin B ointment topical application can reduce and control wound infection effectively and accelerate the process of wound repair.
Assuntos
Polimixina B , Cicatrização , Ferimentos e Lesões , Humanos , Pomadas , Polimixina B/uso terapêutico , Estudos Retrospectivos , Sulfadiazina de Prata , Cicatrização/efeitos dos fármacos , Ferimentos e Lesões/tratamento farmacológicoRESUMO
OBJECTIVES: Treating chronic cutaneous wounds is challenging, and debridement is a central concept in treating them. Studies have shown that CO2 laser debridement can control local infection and promote the wound healing process. The present study aimed to investigate the efficacy and safety of fully ablative CO2 laser debridement compared to routine surgical debridement in the treatment of chronic wounds. METHODS: The retrospective cohort study was conducted on patients with chronic (>1 month) cutaneous wounds (≥1 cm2 ) between December 1, 2017, and December 1, 2020, in the Wound Healing Center at Shanghai Ruijin Hospital, China. Patients treated with CO2 laser debridement with a DEKA SmartXide2 C80 (DEKA) (the CO2 laser group) were compared with matched control patients with similar baseline characteristics who had undergone routine surgical debridement (the routine group). The primary outcome was time-to-heal (days) for chronic wounds in two groups, and secondary outcomes included the wound area and BWAT (Bates-Jensen wound assessment tool) score before treatment, and at 1, 2, 3, and 4 weeks after treatment. RESULTS: The study included 164 patients (82 in the CO2 laser group and 82 matched in the routine group). The time-to-heal for patients in the CO2 laser group (41.30 ± 17.11) was significantly shorter than that of the patients in the routine group (48.51 ± 24.32) (p = 0.015). At 3 and 4 weeks after treatment, the absolute wound area of the CO2 laser group was significantly smaller than that of the routine group. Also, the CO2 laser group exhibited a significantly lower relative area at 2, 3, and 4 weeks after treatment. The CO2 laser group yielded significantly lower BWAT scores at 2, 3, and 4 weeks after treatment. Additionally, the relative BWAT score was significantly lower in the CO2 laser group than the relative scores in the routine group at 2, 3, and 4 weeks after treatment. No adverse events related to the treatments were observed in either group during the study period. CONCLUSIONS: The present study has shown that fully ablative CO2 laser debridement has several advantages over routine sharp surgical debridement. It is superior at ameliorating wound status and reducing wound area, and it also significantly reduces the time-to-heal for chronic wounds, without causing any adverse events.
Assuntos
Lasers de Gás , Ferimentos e Lesões , Dióxido de Carbono , China , Estudos de Coortes , Humanos , Lasers de Gás/efeitos adversos , Estudos Retrospectivos , Resultado do Tratamento , Ferimentos e Lesões/terapiaRESUMO
Methylglyoxal (MGO) is a highly reactive dicarbonyl compound formed during hyperglycaemia. MGO combines with proteins to form advanced glycation end products (AGEs), leading to cellular dysfunction and organ damage. In type 2 diabetes mellitus (T2DM), the higher the plasma MGO concentration, the higher the lower extremity amputation rate. Here, we aimed to identify the mechanisms of MGO-induced dysfunction. We observed that the accumulation of MGO-derived AGEs in human diabetic wounds increased, whereas the expression of glyoxalase 1 (GLO1), a key metabolic enzyme of MGO, decreased. We show for the first time that topical application of pyridoxamine (PM), a natural vitamin B6 analogue, reduced the accumulation of MGO-derived AGEs in the wound tissue of type-2 diabetic mice, promoted the influx of macrophages in the early stage of tissue repair, improved the dysfunctional inflammatory response, and accelerated wound healing. In vitro, MGO damaged the phagocytic functions of M1-like macrophages induced by lipopolysaccharide (LPS), but not those of M0-like macrophages induced by PMA or of M2-like macrophages induced by interleukins 4 (IL-4) and 13 (IL-13); the impaired phagocytosis of M1-like macrophages was rescued by PM administration. These findings suggest that the increase in MGO metabolism in vivo might contribute to macrophage dysfunction, thereby affecting wound healing. Our results indicate that PM may be a novel therapeutic approach for treating diabetic wounds. MGO forms protein adducts that cause macrophage dysfunction. These adducts cause cell and organ dysfunction that is common in diabetes. Pyridoxamine scavenges MGO to ameliorate this dysfunction, promoting wound healing. Pyridoxamine could be used therapeutically to treat non-healing diabetic wounds.
Assuntos
Diabetes Mellitus Experimental , Diabetes Mellitus Tipo 2 , Animais , Diabetes Mellitus Tipo 2/tratamento farmacológico , Macrófagos , Camundongos , Piridoxamina/uso terapêutico , Aldeído Pirúvico , CicatrizaçãoRESUMO
Scar formation and chronic ulcers can develop following a skin injury. They are the result of the over- or underproduction of collagen. It is very important to evaluate the quality and quantity of the collagen that is produced during wound healing, especially with respect to its structure, as these factors are very important to a complicated outcome. However, there is no standard way to quantitatively analyse dermal collagen. As prior work characterised some potentially fractal properties of collagen, it was hypothesised that collagen structure could be evaluated with fractal dimension analysis. Small-angle X-ray scattering technology (SAXS) was used to evaluate the dermis of rats exposed to graft harvest, burn, and diabetic pathologic states. It was found that almost all collagen structures could be quantitatively measured with fractal dimension analysis. Further, there were significant differences in the three-dimensional (3-D) structure of normal collagen versus that measured in pathologic tissues. There was a significant difference in the 3-D structure of collagen at different stages of healing. The findings of this work suggest that fractal analysis is a good tool for wound healing analysis, and that quantitative collagen analysis is very useful for assessing the structure of dermal collagen.
Assuntos
Queimaduras , Derme , Animais , Queimaduras/patologia , Colágeno , Derme/patologia , Fractais , Ratos , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
Nephrocutaneous fistula (NCF) is a rare and severe complication of renal disease and surgical procedures. Treatments for NCF are based on the renal function, and can include nephrectomy, heminephrectomy, nephroureterectomy, endourological maneuvers or antibiotic therapy alone. Here we report a case of a chronic NCF which occurred 5 years after partial nephrectomy. In this report, we describe a new surgical approach for the management of a patient with postoperative NCF. In the present case, in addition to removing the fistulous tract, we also performed an omental flap grafting to tightly cover the kidney. In addition to limiting and controlling the local inflammation, the omental flap prevents contact between the kidney and the flank muscle on its posterior rim. No recurrence or complications occurred throughout 10 months of follow-up. The NCF was successfully treated with completely removal of the sinus tract and omental flap grafting, without nephrectomy. This case adds new aspects to the treatment of NCF.