RESUMO
Nickel-based oxides and oxyhydroxide catalysts exhibit state-of-the-art activity for the sluggish oxygen evolution reaction (OER) under alkaline conditions. A widely employed strategy to increase the gravimetric activity of the catalyst is to increase the active surface area via nanostructuring or decrease the particle size. However, the fundamental understanding about how tuning these parameters influences the density of oxidized species and their reaction kinetics remains unclear. Here, we use solution combustion synthesis, a low-cost and scalable approach, to synthesize a series of Fe0.1Ni0.9O samples from different precursor salts. Based on the precursor salt, the nanoparticle size can be changed significantly from â¼2.5 to â¼37 nm. The OER activity at pH 13 trends inversely with the particle size. Using operando time-resolved optical spectroscopy, we quantify the density of oxidized species as a function of potential and demonstrate that the OER kinetics exhibits a second-order dependence on the density of these species, suggesting that the OER mechanism relies on O-O coupling between neighboring oxidized species. With the decreasing particle size, the density of species accumulated is found to increase, and their intrinsic reactivity for the OER is found to decrease, attributed to the stronger binding of *O species (i.e., a cathodic shift of species energetics). This signifies that the high apparent OER activity per geometric area of the smaller nanoparticles is driven by their ability to accumulate a larger density of oxidized species. This study not only experimentally disentangles the influence of the density of oxidized species and intrinsic kinetics on the overall rate of the OER but also highlights the importance of tuning these parameters independently to develop more active OER catalysts.
RESUMO
Dichloromethane, as a readily available and inexpensive C1 synthon is proposed as a powerful building block for cyclopropanation of alkenes under mild conditions. Herein, we report a highly efficient and versatile dual photoredox system, involving a nickel aminopyridine coordination complex and a photocatalyst, for the cyclopropanation of aromatic olefins using dichloromethane, under visible-light irradiation. The cyclopropanation protocol has been successfully applied at gram scale. Mechanistic studies suggest a Ni(II) pyridyl radical complex as the key intermediate for the homolytic cleavage of the Csp3-Cl bond, generating a chloromethyl radical that is captured by the olefin coupling partner. Our findings also highlight the versatility of this methodology. By directing the radical/polar crossover process, we were able to selectively drive the reaction towards either the formation of cyclopropyl derivatives or the corresponding non-cyclic alkyl chloride products. The methodology also successfully apply to geminal dichloroalkanes, including the formation of spiro[2,2] compounds. Moreover, our methodology extends to the synthesis of deuterium-labelled cyclopropanes, demonstrating its utility in isotopic labelling and broadening its applicability in chemical synthesis and drug development.
RESUMO
The construction of carbonyl compounds via carbonylation reactions using safe CO sources remains a long-standing challenge to synthetic chemists. Herein, we propose a catalyst cascade Scheme in which CO2 is used as a CO surrogate in the carbonylation of benzyl chlorides. Our approach is based on the cooperation between two coexisting catalytic cycles: the CO2-to-CO electroreduction cycle promoted by [Fe(TPP)Cl] (TPP=meso-tetraphenylporphyrin) and an electrochemical carbonylation cycle catalyzed by [Ni(bpy)Br2] (2,2'-bipyridine). As a proof of concept, this protocol allows for the synthesis of symmetric ketones from good to excellent yields in an undivided cell with non-sacrificial electrodes. The reaction can be directly scaled up to gram-scale and operates effectively at a CO2 concentration of 10 %, demonstrating its robustness. Our mechanistic studies based on cyclic voltammetry, IR spectroelectrochemistry and Density Functional Theory calculations suggest a synergistic effect between the two catalysts. The CO produced from CO2 reduction is key in the formation of the [Ni(bpy)(CO)2], which is proposed as the catalytic intermediate responsible for the C-C bond formation in the carbonylation steps.
RESUMO
Spin crossover (SCO) complexes, through their reversible spin transition under external stimuli, can work as switchable memory materials. Here, we present a protocol for the synthesis and characterization of a specific polyanionic iron SCO complex and its diluted systems. We describe steps for its synthesis and the determination of crystallographic structure of the SCO complex in diluted systems. We then detail a range of spectroscopic and magnetic techniques employed to monitor the spin state of the SCO complex in both diluted solid- and liquid-state systems. For complete details on the use and execution of this protocol, please refer to Galán-Mascaros et al.1.
Assuntos
Compostos Ferrosos , FerroRESUMO
Two new tetradentate N4 ligands (LN4), LN4 = Me2,Me2PyzTACN (1-(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)-4,7-dimethyl-1,4,7-triazacyclononane) and Me2,MeImTACN (1-((1-methyl-1H-imidazol-1-yl)methyl)-4,7-dimethyl-1,4,7-triazacyclononane) have been synthesized and their corresponding Fe(II) complexes [FeII(Me2,Me2PyzTACN)(CF3SO3)2], 1Pz, and [FeII(Me2,MeImTACN)(CF3SO3)2], 1Im, have been prepared and characterized. Complexes 1Pz and 1Im catalyse the hydroxylation of C-H bonds of alkanes with excellent efficiencies, using hydrogen peroxide as oxidant. The high H/D kinetic isotope effect values for C-H hydroxylation, large normalized tertiary/secondary C-H (C3/C2) bond selectivities in adamantane oxidation, and high degrees of stereoretention in the oxidation of cis-1,2-dimethylcyclohexane are indicative of metal-based oxidation processes. The complexes also catalyse the oxidation of cyclooctene to form its corresponding epoxide and syn-diol. For 1Pz the epoxide is the main product, while for the analogous complex 1Im the syn-diol predominates. The active oxidant is proposed to be an [(LN4)FeV(O)(OH)]2+ species (2Pz, LN4 = Me2,Me2PyzTACN and 2Im, LN4 = Me2,MeImTACN) which may exist in two tautomeric forms related by a proton shift between the oxo and hydroxo ligands. Isotope labelling experiments show that the oxygen atom in the hydroxylated products originates from both water and hydrogen peroxide, and labelling experiments involving oxygen atom transfer to sterically bulky substrates provide indirect information on the steric influence exerted by the two ligands in the relative reactivities of the two hypervalent iron tautomers. Based on these labelling studies, the steric influence exerted by each of the ligands towards the relative reactivity of the oxo ligands of the corresponding pair of Fe(V)(O)(OH) tautomers can be derived. Furthermore, this steric influence can be gauged relative to related complexes/ligands.
RESUMO
In this study, we combine inâ situ spectroelectrochemistry coupled with electron paramagnetic resonance (EPR) and X-ray absorption spectroscopies (XAS) to investigate a molecular Ru-based water oxidation catalyst bearing a polypyridinic backbone [RuII(OH2)(Py2Metacn)]2+ . Although high valent key intermediate species arising in catalytic cycles of this family of compounds have remain elusive due to the lack of additional anionic ligands that could potentially stabilize them, mechanistic studies performed on this system proposed a water nucleophilic attack (WNA) mechanism for the O-O bond formation. Employing inâ situ experimental conditions and complementary spectroscopic techniques allowed to observe intermediates that provide support for a WNA mechanism, including for the first time a Ru(V) oxo intermediate based on the Py2Metacn ligand, in agreement with the previously proposed mechanism.
RESUMO
A catalytic system based on earth-abundant elements that efficiently hydrogenates aryl olefins using visible light as the driving-force and H2O as the sole hydrogen atom source is reported. The catalytic system involves a robust and well-defined aminopyridine cobalt complex and a heteroleptic Cu photoredox catalyst. The system shows the reduction of styrene in aqueous media with a remarkable selectivity (>20 000) versus water reduction (WR). Reactivity and mechanistic studies support the formation of a [Co-H] intermediate, which reacts with the olefin via a hydrogen atom transfer (HAT). Synthetically useful deuterium-labelled compounds can be straightforwardly obtained by replacing H2O with D2O. Moreover, the dual photocatalytic system and the photocatalytic conditions can be rationally designed to tune the selectivity for aryl olefin vs. aryl ketone reduction; not only by changing the structural and electronic properties of the cobalt catalysts, but also by modifying the reduction properties of the photoredox catalyst.
RESUMO
Metal oxides and oxyhydroxides exhibit state-of-the-art activity for the oxygen evolution reaction (OER); however, their reaction mechanism, particularly the relationship between charging of the oxide and OER kinetics, remains elusive. Here, we investigate a series of Mn-, Co-, Fe-, and Zn-doped nickel oxides using operando UV-vis spectroscopy coupled with time-resolved stepped potential spectroelectrochemistry. The Ni2+/Ni3+ redox peak potential is found to shift anodically from Mn- < Co- < Fe- < Zn-doped samples, suggesting a decrease in oxygen binding energetics from Mn- to Zn-doped samples. At OER-relevant potentials, using optical absorption spectroscopy, we quantitatively detect the subsequent oxidation of these redox centers. The OER kinetics was found to have a second-order dependence on the density of these oxidized species, suggesting a chemical rate-determining step involving coupling of two oxo species. The intrinsic turnover frequency per oxidized species exhibits a volcano trend with the binding energy of oxygen on the Ni site, having a maximum activity of â¼0.05 s-1 at 300 mV overpotential for the Fe-doped sample. Consequently, we propose that for Ni centers that bind oxygen too strongly (Mn- and Co-doped oxides), OER kinetics is limited by O-O coupling and oxygen desorption, while for Ni centers that bind oxygen too weakly (Zn-doped oxides), OER kinetics is limited by the formation of oxo groups. This study not only experimentally demonstrates the relation between electroadsorption free energy and intrinsic kinetics for OER on this class of materials but also highlights the critical role of oxidized species in facilitating OER kinetics.
RESUMO
The inertness of chloroalkanes has precluded them as coupling partners for cross-coupling reactions. Herein we disclose a general strategy for the activation of inert alkyl chlorides through photoredox catalysis and their use as coupling partners with alkenes. The catalytic system is formed by [Ni(OTf)(Py2 Ts tacn)](OTf) (1Ni ), which is responsible for the Csp3 -Cl bond activation, and [Ir(NMe2 bpy)(ppy)2 ]PF6, (PCIr NMe2 ), which is the photoredox catalyst. Combined experimental and theoretical studies show an inâ situ photogenerated NiI intermediate ([Ni(Py2 Ts tacn)]+ ) which is catalytically competent for the Csp3 -Cl bond cleavage via a SN 2 mechanism for primary alkyl chlorides, forming carbon-centered free radicals, which react with the olefin leading to the formation of the Csp3 -Csp3 bond. These results suggest inert alkyl chlorides can be electrophiles for developing new intermolecular strategies in which low-valent aminopyridine nickel complexes act as key catalytic species.
RESUMO
The electrons that nature uses to reduce CO2 during photosynthesis come from water oxidation at the oxygen-evolving complex of photosystem II. Molecular catalysts have served as models to understand its mechanism, in particular the O-O bond-forming reaction, which is still not fully understood. Here we report a Ru(IV) side-on peroxo complex that serves as a 'missing link' for the species that form after the rate-determining O-O bond-forming step. The Ru(IV) side-on peroxo complex (η2-1iv-OO) is generated from the isolated Ru(IV) oxo complex (1iv=O) in the presence of an excess of oxidant. The oxidation (IV) and spin state (singlet) of η2-1iv-OO were determined by a combination of experimental and theoretical studies. 18O- and 2H-labelling studies evidence the direct evolution of O2 through the nucleophilic attack of a H2O molecule on the highly electrophilic metal-oxo species via the formation of η2-1iv-OO. These studies demonstrate water nucleophilic attack as a viable mechanism for O-O bond formation, as previously proposed based on indirect evidence.
Assuntos
Complexos de Coordenação/química , Peróxidos/química , Água/química , Complexos de Coordenação/síntese química , Teoria da Densidade Funcional , Marcação por Isótopo , Modelos Químicos , Oxirredução , Isótopos de Oxigênio/química , Rutênio/químicaRESUMO
The complex α-[Fe(mcp)(OTf)2] (mcp = N,N'-dimethyl-N,N'-bis(pyridin-2-ylmethyl)-cyclohexane-1,2-diamine and OTf = trifluoromethanesulfonate anion) was reported in 2011 by some of us as an active water oxidation (WO) catalyst in the presence of sacrificial oxidants. However, because chemical oxidants are likely to take part in the reaction mechanism, mechanistic electrochemical studies are critical in establishing to what extent previous studies with sacrificial reagents have actually been meaningful. In this study, the complex α-[Fe(mcp)(OTf)2] and its analogues were investigated electrochemically under both acidic and neutral conditions. All the systems under investigation proved to be electrochemically active toward the WO reaction, with no major differences in activity despite the structural changes. Our findings show that WO-catalyzed by mcp-iron complexes proceeds via homogeneous species, whereas the analogous manganese complex forms a heterogeneous deposit on the electrode surface. Mechanistic studies show that the reaction proceeds with a different rate-determining step (rds) than what was previously proposed in the presence of chemical oxidants. Moreover, the different kinetic isotope effect (KIE) values obtained electrochemically at pH 7 (KIE â¼ 10) and at pH 1 (KIE = 1) show that the reaction conditions have a remarkable effect on the rds and on the mechanism. We suggest a proton-coupled electron transfer (PCET) as the rds under neutral conditions, whereas at pH 1 the rds is most likely an electron transfer (ET).
RESUMO
Cationic fac-[Re(CO)3(pz*H)(pypzH)]OTf (pz*H = pyrazole, pzH; 3,5-dimethylpyrazole, dmpzH; indazole, indzH; 3-(2-pyridyl)pyrazole, pypzH) were obtained from fac-[ReBr(CO)3(pypzH)] by halide abstraction with AgOTf and subsequent addition of the corresponding pyrazole. Successive deprotonation with Na2CO3 and NaOH gave neutral fac-[Re(CO)3(pz*H)(pypz)] and anionic Na{fac-[Re(CO)3(pz*)(pypz)]} complexes, respectively. Cationic fac-[Re(CO)3(pz*H)(pypzH)]OTf, neutral complexes fac-[Re(CO)3(pz*H)(pypz)], and fac-[Re(CO)3(pypz)2Na] were subjected to photophysical and electrochemical studies. They exhibit phosphorescent decays from a prevalently 3MLCT excited state with quantum yields (Φ) in the range between 0.03 and 0.58 and long lifetimes (τ from 220 to 869 ns). The electrochemical behavior in Ar atmosphere of cationic and neutral complexes indicates that the oxidation processes assigned to ReI â ReII occurs at lower potentials for the neutral complex compared to cationic complex. The reduction processes occur at the ligands and do not depend on the charge of the complexes. The electrochemical behavior in CO2 saturated media is consistent with CO2 electrocatalyzed reduction, where the values of the catalytic activity [icat(CO2)/icat(Ar)] ranged from 2.7 to 11.5 (compared to 8.1 for fac-[Re(CO)3Cl(bipy)] studied as a reference). Controlled potential electrolysis for the pyrazole cationic (3a) and neutral (4a) complexes after 1 h affords CO in faraday yields of 61 and 89%, respectively. These values are higher for indazole complexes and may be related to the acidity of the coordinated pyrazole.
RESUMO
Postmodification of reticular materials with well-defined catalysts is an appealing approach to produce new catalytic functional materials with improved stability and recyclability, but also to study catalysis in confined spaces. A promising strategy to this end is the postfunctionalization of crystalline and robust metal-organic frameworks (MOFs) to exploit the potential of crystal-to-crystal transformations for further characterization of the catalysts. In this regard, two new photocatalytic materials, MOF-520-PC1 and MOF-520-PC2, are straightforwardly obtained by the postfunctionalization of MOF-520 with perylene-3-carboxylic acid (PC1) and perylene-3-butyric acid (PC2). The single crystal-to-crystal transformation yielded the X-ray diffraction structure of catalytic MOF-520-PC2. The well-defined disposition of the perylenes inside the MOF served as suitable model systems to gain insights into the photophysical properties and mechanism by combining steady-state, time-resolved, and transient absorption spectroscopy. The resulting materials are active organophotoredox catalysts in the reductive dimerization of aromatic aldehydes, benzophenones, and imines under mild reaction conditions. Moreover, MOF-520-PC2 can be applied for synthesizing gram-scale quantities of products in continuous-flow conditions under steady-state light irradiation. This work provides an alternative approach for the construction of well-defined, metal-free, MOF-based catalysts.
RESUMO
We demonstrate here the suitability of CsPbBr3 nanoparticles as photosensitizers for a demanding photoredox catalytic homo- and cross-coupling of alkyl bromides at room temperature by merely using visible light and an electron donor, thanks to the cooperative action between the nanoparticle surface and organic capping.
RESUMO
A mechanistic understanding of electro- and photocatalytic CO2 reduction is crucial to develop strategies to overcome catalytic bottlenecks. In this regard, for a new CO2-to-CO reduction cobalt aminopyridine catalyst, a detailed experimental and theoretical mechanistic study is herein presented toward the identification of bottlenecks and potential strategies to alleviate them. The combination of electrochemistry and in situ spectroelectrochemistry together with spectroscopic techniques led us to identify elusive key electrocatalytic intermediates derived from complex [LN4Co(OTf)2] (1) (LN4 = 1-[2-pyridylmethyl]-4,7-dimethyl-1,4,7-triazacyclononane) such as a highly reactive cobalt(I) (1(I)) and a cobalt(I) carbonyl (1(I)-CO) species. The combination of spectroelectrochemical studies under CO2, 13CO2, and CO with DFT disclosed that 1(I) reacts with CO2 to form the pivotal 1(I)-CO intermediate at the 1(II/I) redox potential. However, at this reduction potential, the formation of 1(I)-CO restricts the electrocatalysis due to the endergonicity of the CO release step. In agreement with the experimentally observed CO2-to-CO electrocatalysis at the CoI/0 redox potential, computational studies suggested that the electrocatalytic cycle involves striking metal carbonyls. In contrast, under photochemical conditions, the catalysis smoothly proceeds at the 1(II/I) redox potential. Under the latter conditions, it is proposed that the electron transfer to form 1(I)-CO from 1(II)-CO is under diffusion control. Then, the CO release from 1(II)-CO is kinetically favored, facilitating the catalysis. Finally, we have found that visible-light irradiation has a positive impact under electrocatalytic conditions. We envision that light irradiation can serve as an effective strategy to circumvent the CO poisoning and improve the performance of CO2 reduction molecular catalysts.
RESUMO
The chemical inertness of abundant and commercially available alkyl chlorides precludes their widespread use as reactants in chemical transformations. Presented in this work is a metallaphotoredox methodology to achieve the catalytic intramolecular reductive cyclization of unactivated alkyl chlorides with tethered alkenes. The cleavage of strong C(sp3 )-Cl bonds is mediated by a highly nucleophilic low-valent cobalt or nickel intermediate generated by visible-light photoredox reduction employing a copper photosensitizer. The high basicity and multidentate nature of the ligands are key to obtaining efficient metal catalysts for the functionalization of unactivated alkyl chlorides.
RESUMO
Two imidazolate-based Co-MOFs, IFP-5 and IFP-8 (imidazolate framework Potsdam), with a different peripheral group -R (-Me and -OMe, respectively) have been synthesized by a solvothermal method and tested toward the oxygen evolution reaction (OER). Remarkably, IFP-8 presents much lower overpotentials (319 mV at 10 mA/cm2 and 490 mV at 500 mA/cm2) than IFP-5 toward OER, as confirmed by online gas chromatography measurements (Faradaic yield of O2 > 99%). Moreover, the system is extraordinarily stable during 120 h, even when used as a catalyst toward the overall water splitting reaction without any sign of fatigue. An integrated ex situ spectroscopic study, based on powder X-ray diffraction, extended X-ray absorption fine structure, and attenuated total reflection, allows the identification of the active species and the factors that determine the catalytic activity. Indeed, it was found that the performances are highly affected by the nature of the -R group, because this small change strongly influences the conversion of the initial metal organic framework to the active species. As a consequence, the remarkable activity of IFP-8 can be ascribed to the formation of Co(O)OH phase with a particle size of a few nanometers (3-10 nm) during the electrocatalytic oxygen evolution.
RESUMO
The nature of the oxidizing species in water oxidation reactions with chemical oxidants catalyzed by α-[Fe(OTf)2(mcp)] (1α; mcp = N, N'-dimethyl- N, N'-bis(pyridin-2-ylmethyl)cyclohexane-1,2-diamine, OTf = trifluoromethanesulfonate anion) and ß-[Fe(OTf)2(mcp)] (1ß) has been investigated. Mössbauer spectroscopy provides definitive evidence that 1α and 1ß generate oxoiron(IV) species as the resting state. Decomposition paths of the catalysts have been investigated by identifying and quantifying ligand fragments that form upon degradation. This analysis correlates the water oxidation activity of 1α and 1ß with stability against oxidative damage of the ligand via aliphatic C-H oxidation. The site of degradation and the relative stability against oxidative degradation are shown to be dependent on the topology of the catalyst. Furthermore, the mechanisms of catalyst degradation have been rationalized by computational analyses, which also explain why the topology of the catalyst enforces different oxidation-sensitive sites. This information has served in creating catalysts where sensitive C-H bonds have been replaced by C-D bonds. The deuterated analogues D4-α-[Fe(OTf)2(mcp)] (D4-1α), D4-ß-[Fe(OTf)2(mcp)] (D4-1ß), and D6-ß-[Fe(OTf)2(mcp)] (D6-1ß) were prepared, and their catalytic activity has been studied. D4-1α proves to be an extraordinarily active and efficient catalyst (up to 91% of O2 yield); it exhibits initial reaction rates identical with those of its protio analogue, but it is substantially more robust toward oxidative degradation and yields more than 3400 TON ( n(O2)/ n(Fe)). Altogether this evidences that the water oxidation catalytic activity is performed by a well-defined coordination complex and not by iron oxides formed after oxidative degradation of the ligands.
RESUMO
High valent iron species are very reactive molecules involved in oxidation reactions of relevance to biology and chemical synthesis. Herein we describe iron(iv)-tosylimido complexes [FeIV(NTs)(MePy2tacn)](OTf)2 (1(IV)[double bond, length as m-dash]NTs) and [FeIV(NTs)(Me2(CHPy2)tacn)](OTf)2 (2(IV)[double bond, length as m-dash]NTs), (MePy2tacn = N-methyl-N,N-bis(2-picolyl)-1,4,7-triazacyclononane, and Me2(CHPy2)tacn = 1-(di(2-pyridyl)methyl)-4,7-dimethyl-1,4,7-triazacyclononane, Ts = Tosyl). 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs are rare examples of octahedral iron(iv)-imido complexes and are isoelectronic analogues of the recently described iron(iv)-oxo complexes [FeIV(O)(L)]2+ (L = MePy2tacn and Me2(CHPy2)tacn, respectively). 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs are metastable and have been spectroscopically characterized by HR-MS, UV-vis, 1H-NMR, resonance Raman, Mössbauer, and X-ray absorption (XAS) spectroscopy as well as by DFT computational methods. Ferric complexes [FeIII(HNTs)(L)]2+, 1(III)-NHTs (L = MePy2tacn) and 2(III)-NHTs (L = Me2(CHPy2)tacn) have been isolated after the decay of 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs in solution, spectroscopically characterized, and the molecular structure of [FeIII(HNTs)(MePy2tacn)](SbF6)2 determined by single crystal X-ray diffraction. Reaction of 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs with different p-substituted thioanisoles results in the transfer of the tosylimido moiety to the sulphur atom producing sulfilimine products. In these reactions, 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs behave as single electron oxidants and Hammett analyses of reaction rates evidence that tosylimido transfer is more sensitive than oxo transfer to charge effects. In addition, reaction of 1(IV)[double bond, length as m-dash]NTs and 2(IV)[double bond, length as m-dash]NTs with hydrocarbons containing weak C-H bonds results in the formation of 1(III)-NHTs and 2(III)-NHTs respectively, along with the oxidized substrate. Kinetic analyses indicate that reactions proceed via a mechanistically unusual HAT reaction, where an association complex precedes hydrogen abstraction.
RESUMO
Cobalt(ii) complexes with the general structure [CoII(OTf)(Y,XPy2Tstacn)](OTf) (1R, where Y,XPy2Tstacn is 1,4-di(p-Y,m-X-picolyl)-7-R-1,4,7-triazacyclononane; 1H, 1CO2Et, 1DMM) and [CoII(OTf)2(Y,XPyMetacn)] (2R, where Y,XPyMetacn is 1-(p-Y,m-X-picolyl)-7,4-di-methyl-1,4,7-triazacyclononane; 2CO2Et, 2Cl, 2H, 2DMM, 2NMe2) were active in both light-driven acetophenone (3a) and water reduction. Competition studies show that aromatic ketone/water reduction selectivity ranks from 0.2 to 8.0. Nevertheless, considering the concentrations of water and ketone in catalysis (ratio H2O/3a â¼ 2000) the highest selectivity obtained is greater than 15 000. The selectivity correlates well with the CoI/II redox potential within the same cobalt catalyst series (span 240 mV (1R) and 290 mV (2R)), with electron donating ligands favoring ketone reduction over H2 evolution. Based on this finding, the operative mechanism for the reduction of aromatic ketones is consistent with a single electron transfer (SET) followed by a hydrogen atom transfer (HAT) mechanism. This new insight will be a guide to develop selective catalytic systems to produce fine solar chemicals in water.