RESUMO
Advancement in bioinspired alloy nanomaterials has a crucial impact on fuel cell applications. Here, we report the synthesis of PtPd alloy nanoclusters via the hydrothermal method using Piper longum extract, representing a novel and environmentally friendly approach. Physicochemical characteristics of the synthesized nanoclusters were investigated using various instrumentation techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, and High-Resolution Transmission electron microscopy. The electrocatalytic activity of the biogenic PtPd nanoclusters towards the oxidation of formic acid and methanol was evaluated chronoamperometry and cyclic voltammetry studies. The surface area of the electrocatalyst was determined to be 36.6 m2g-1 by Electrochemical Surface Area (ECSA) analysis. The biologically inspired PtPd alloy nanoclusters exhibited significantly higher electrocatalytic activity compared to commercial Pt/C, with specific current responses of 0.24 mA cm - 2 and 0.17 mA cm - 2 at synthesis temperatures of 180 °C and 200 °C, respectively, representing approximately four times higher oxidation current after 120 min. This innovative synthesis approach offers a promising pathway for the development of PtPd alloy nanoclusters with enhanced electrocatalytic activity, thereby advancing fuel cell technology towards a sustainable energy solution.
Assuntos
Formiatos , Metanol , Piper , Ligas , Extratos VegetaisRESUMO
In order to support biomolecule attachment, an effective electrochemical transducer matrix for biosensing devices needs to have many specialized properties, including quick electron transfer, stability, high surface area, biocompatibility, and the presence of particular functional groups. Enzyme-linked immunosorbent assays, gel electrophoresis, mass spectrometry, fluorescence spectroscopy, and surface-enhanced Raman spectroscopy are common techniques used to assess biomarkers. Even though these techniques provide precise and trustworthy results, they cannot replace clinical applications because of factors such as detection time, sample amount, sensitivity, equipment expense, and the need for highly skilled individuals. For the very sensitive and targeted electrochemical detection of the salivary oral cancer biomarker IL8, we have created a flower-structured molybdenum disulfide-decorated zinc oxide composite on GCE (interleu-kin-8). This immunosensor shows very fast detection; the limit of detection (LOD) for interleukin-8 (IL8) detection in a 0.1 M phosphate buffer solution (PBS) was discovered to be 11.6 fM, while the MoS2/ZnO nanocomposite modified glassy carbon electrode (GCE) demonstrated a high catalytic current linearly from 500 pg to 4500 pg mL-1 interleukin-8 (IL8). Therefore, the proposed biosensor exhibits excellent stability, high accuracy sensitivity, repeatability, and reproducibility and shows the acceptable fabrication of the electrochemical biosensors to detect the ACh in real sample analysis.
RESUMO
Three-dimensional multi-porous Iron Oxide/carbon (Fe2O3/C) composites derived from tamarind shell biomass were synthesized by a single-step co-pyrolysis technique and utilized for Paracetamol (PAC) dismissal in the combined adsorption, and advanced oxidation such as electrochemical regeneration techniques. The Fe2O3/C composites were prepared by different pyrolysis temperatures, and named as TS750 (without Fe2O3at 750 °C), MTS450 BCs (Low-450 °C), MTS600 BCs (Moderate-600 °C) and MTS750 BCs (high-750 °C), respectively. As-prepared Fe2O3/C composite was characterized by FE-SEM, XRD, BET, and XPS analysis. The specific surface area and the spatial interaction between the interlayers of Fe2O3 and C were significantly improved by increasing the pyrolysis temperatures from 450 to 750 °C, which improved the adsorption capacity of Fe2O3/C composites in terms of higher rate constants and chemisorption kinetics. The Pseudo-second-order kinetics model fitted in the adsorption test results of Fe2O3/C composites with the highest correlation co-efficiency. The Langmuir-isotherms model fitted in the adsorption test of the TS750 and MTS450 BCs. The Freundlich isotherms model is more fit with MTS600 and MTS750 BCs. Based on the isotherm results, the MTS750 BCs achieved 46.9 mg/g of maximum PAC adsorption capacity. The optimized MTS750 composites could be completely recovered by using an advanced electrochemical oxidation regeneration approach within 180 min. Also, with the adsorption and recovery process, the TOC removal rate improved to â¼79.4%. After the 6th cycle electrochemical oxidation process, the obtained results of the re-adsorption test showed the stabile adsorption activity of the sorbent material. The data outcomes herein propose that this type of combined adsorption and electrochemical approach will be useful in commercial water treatment plants.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Ferro/química , Acetaminofen , Adsorção , Poluentes Químicos da Água/análise , Carbono , Cinética , Purificação da Água/métodosRESUMO
A nanohybrid prepared from the lignocellulosic residue is a feasible approach to synthesize blue light emitting fluorescent doped TiO2 quantum dot nanocomposite (C-TiO2 QDs) by microwave techniques using Mandarin orange (Citrus reticulata) peel powder with titanium isopropoxide precursors. With a greater orange peel colloidal medium, the structure of the TiO2-NPs changed from a mixture of rutile and anatase phases to exclusively the anatase phase. The optical and morphological properties of as-prepared C-TiO2 QDs were characterized by HR-TEM, XRD, FT-IR, UV-visible, PL spectra, DLS, and Zeta potential techniques. The reaction condition was optimized by changing substrate composition, pH, and reaction time. C-TiO2 QDs exhibit outstanding stability at pH 7 and remain sustained for at least 180 days without aggregation. As prepared C-TiO2 QDs have distinct emission and excitation activities with an average particle size of 2.8 nm. Cell viability was performed on normal L929 cells, where it showed excellent biocompatibility (<90 %) even at the concentration of 200 µg/mL after 24 h treatment. Additionally, the synthesized C-TiO2 QDs were used with L929 cells as a fluorescent probe for bio-imaging applications. The results revealed that neither of the cell lines' morphologies had significantly changed, proving the biocompatibility of the synthetic C-TiO2 QDs.
Assuntos
Citrus sinensis , Pontos Quânticos , Pontos Quânticos/química , Micro-Ondas , Carbono , Espectroscopia de Infravermelho com Transformada de Fourier , Titânio/química , Corantes FluorescentesRESUMO
In recent years, silicon nanoparticles (Si NPs) have been explored as a promising alternative to traditional organic fluorophores in optical sensing and bioimaging applications owing to their exceptional optical properties and negligible toxicity. In this study, water-dispersible Si NPs were prepared from a 3-aminopropyl trimethoxysilane precursor using a facile one-pot process. The as-prepared Si NPs exhibited excitation-wavelength-dependent fluorescence properties and bright green fluorescence at 530 nm upon excitation at 420 nm. The fluorescence properties of Si NPs remained unperturbed under various physiological conditions, such as varying pH, ionic strength, and incubation time. A sensitive fluorometric turn-off sensor for cyanide ion (CN-) detection was devised based on the unique fluorescence properties of Si NPs. The Si NPs-based detection assay showed a good linear response toward CN- ranging between 0 and 33 µM, with a limit of detection as low as 0.90 nM. Caenorhabditis elegans is used as a model organism to evaluate the in vivo toxicity and molecular imaging capability of Si NPs.
Assuntos
Nanopartículas , Silício , Animais , Caenorhabditis elegans , Cianetos , Nanopartículas/química , Corantes Fluorescentes/químicaRESUMO
Heavy metal ion pollution harms human health and the environment and continues to worsen. Here, we report the synthesis of boron (B), phosphorous (P), nitrogen (N), and sulfur (S) co-doped carbon dots (BP/NS-CDs) by a one-step facile hydrothermal process. The optimum synthetic parameters are of 180 °C temperature, 12 h reaction time and 15% of PBA mass. The as-synthesized BP/NS-CDs exhibits excellent water solubility, strong green photoluminescence (PL) at 510 nm, and a high quantum yield of 22.4%. Moreover, BP/NS-CDs presented high monodispersity (7.2 ± 0.45 nm), excitation-dependent emission, PL stability over large pH, and high ionic strength. FTIR, XRD, and XPS are used to confirm the successful B and P doping of BP/NS-CDs. BP/NS-CD photoluminescent probes are selectively quenched by Cu2+ and Fe3+ ions but showed no response to the presence of other metal cations. The PL emission of BP/NS-CDs exhibited a good linear correlation with Cu2+ and Fe3+ concentrations with detection limits of 0.18 µM and 0.27 µM for Cu2+ and Fe3+, respectively. Furthermore, the HCT116 survival cells kept at 99.4 ± 1.3% and cell imaging capability, when the BP/NS-CDs concentration is up to 300 µg/mL by MTT assay. The proposed sensor is potential applications for the detection of Cu2+ and Fe3+ ions in environmental water samples.
Assuntos
Carbono , Enxofre , Humanos , Temperatura , Íons , Água , NitrogênioRESUMO
Heteroatom-doped photoluminescent (PL) carbon dots (CDs) have recently gained attention as optical sensors due to their excellent tunable properties. In this work, we propose a one-pot hydrothermal synthesis of PL nitrogen (N), sulfur (S), and phosphorus (P) co-doped carbon dots (NSP-CDs) using glutathione and phosphoric acid (H3PO4) as precursors. The synthesized NSP-CDs were characterized using different spectroscopic and microscopic techniques, including ultraviolet-visible (UV-Vis) spectroscopy, fluorescence spectroscopy, Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. The NSP-CDs exhibited excellent PL properties with green emission at 492 nm upon excitation at 417 nm, a high quantum yield of 26.7%, and dependent emission behavior. The as-prepared NSP-CDs were spherical with a well-monodispersed average particle size of 5.2 nm. Moreover, NSP-CDs demonstrate high PL stability toward a wider pH, high salt ionic strength, and various solvents. Furthermore, the NSP-CDs showed a three-state "off-on-off" PL response upon the sequential addition of Al3+ and Fe3+ ions, with a low limit of detection (LOD) of 10.8 nM for Al3+ and 50.7 nM for Fe3+. The NSP-CD sensor can construct an INHIBIT logic gate with Al3+ and Fe3+ ions as the chemical inputs and emissions as the output mode. Owing to an excellent tunable PL property and biocompatibility, the NSP-CDs were applied for sensing Al3+ and Fe3+ ions as well as live cell imaging. Furthermore, NSP-CDs were designed as PL sensors for detecting Al3+ and Fe3+ ions in real water show their potential application.
Assuntos
Carbono , Pontos Quânticos , Carbono/química , Nitrogênio/química , Pontos Quânticos/química , Enxofre/química , Íons/químicaRESUMO
Hydrogel nanocomposites are attracting increasing attention in field of biology owing to their unique properties. The present work focuses on the fabrication and characterization of novel hydrogel nanocomposite systems in which silver nanoparticles (AgNPs) are embedded in a carrageenan (κ-CGN)-sodium alginate (SA) hydrogel. The performance of the prepared κ-CGN-SA hydrogel and κ-CGN-SA/AgNPs hydrogel nanocomposite was determined by UV-visible spectroscopy, FTIR, XRD, SEM, EDX spectrum, EDX mapping, and TEM analysis. Surface plasmon resonance at 428 nm confirmed the presence of AgNPs in the κ-CGN-SA hydrogel. The results indicate that AgNPs with an average diameter of 30 nm were uniformly dispersed in the κ-CGN-SA hydrogel matrix. The amount of Ag+ ion release kinetic from the κ-CGN-SA hydrogel matrix is very low, showing that AgNPs were well trapped within the κ-CGN-SA/AgNPs hydrogel nanocomposite. The high antibacterial activity of the κ-CGN-SA/AgNPs hydrogel nanocomposite was found to be 89.6 ± 1.4% and 91.4 ± 2.3% against the gram-positive S. aureus and the gram-negative E. coli, respectively. Moreover, the κ-CGN-SA/AgNPs hydrogel nanocomposite showed good biocompatibility by the MTT test. The novel κ-CGN-SA/AgNPs hydrogel nanocomposite low cytotoxicity and antibacterial efficacy is proposed as a potential candidate for biomedical applications.
Assuntos
Nanopartículas Metálicas , Nanocompostos , Nanogéis , Carragenina/química , Nanopartículas Metálicas/química , Escherichia coli , Alginatos/química , Prata/química , Staphylococcus aureus , Antibacterianos/química , Hidrogéis/química , Nanocompostos/químicaRESUMO
A novel aluminium (Al) and its active alloys are extensively been used in nearly all areas owing to their cost-effectiveness. But when it is subjected to an aqueous medium, gets corroded through a chemical response. In this paper, a novel framework was fabricated by copolymer coating over on Al and loaded with zinc via electro polymerization and electrodeposition method ([EDA- OPDA]Al@Zn). The as-fabricated composite has emerged for the sorption of Methylene Blue (MB) aqueous dye and Paracetomal drug (PAR). The as-fabricated composite framework has been categorized via IR spectra, FE-SEM images, and EDX spectra. The sorption progression was optimized for numerous prompting features like pH, contact time and impact of dosage. Based on kinetics data, the growth in QE value by an enhancement in temperature for adsorption and the higher r values shows the adsorption progression is a pseudo-second-order model. The thermodynamic constraints specify that the field of adsorbate is impulsive and typical endothermic process. Instead, the corrosion resistance of a composite in the 3.5% of NaCl. Solution was explored via EIS spectra and potentio-dynamic polarization. Depending on the observed features, it indicates that the [EDA-OPDA]Al@Zn framework provided fantastic corrosion resistance. So it is obvious that the as-synthesized framework is of multitasking, that it could be successfully performed for the exclusion of MB aqueous dye and PAR drug from the aqueous medium and it also withstands effectively in this corrosive medium.
RESUMO
In this study, the sol-gel technique was used to develop Cobalt Sulfur codoped Titanium Dioxide (Co-S codoped TiO2) photocatalysts. For structural analysis of the prepared resultant TiO2 samples, XRD, FTIR, UV-Vis DRS, SEM, HR-TEM and EDX measurements were used to describe the produced photocatalysts. The characterization findings indicate that the synthesized nanoparticles possessed great crystallinity, high purity, and superior optical characteristics. For the methylene blue (MB) degradation process, Co-S codoped TiO2 nanoparticles were tested for their photocatalytic degradation performance. The Co-S codoped TiO2 nanoparticles had improved catalytic activity when compared with pure, Co-doped, S-doped TiO2 and decomposed 93% of MB in 120 min. When compared to pure and doped TiO2, the catalysts of Co-S codoped TiO2 showed a synergistic effect and improved the performance of the catalysts. Furthermore, the antibacterial applications of synthesized Co-S codoped TiO2 nanoparticles was studied against E. coli (Gram negative) and S. aureus (Gram positive) bacteria and exhibited strong antibacterial activity against the selected strains.
Assuntos
Cobalto , Escherichia coli , Staphylococcus aureus , Titânio/química , Luz , Catálise , Enxofre/química , Enxofre/farmacologia , Azul de Metileno , Antibacterianos/farmacologiaRESUMO
The controlled-release characteristic of drug delivery systems is utilized to increase the residence time of therapeutic agents in the human body. This study aimed to formulate and characterize salsalate (SSL)-loaded chitosan nanoparticles (CSNPs) prepared using the ionic gelation method and to assess their in vitro release and antibacterial and antibiofilm activities. The optimized CSNPs and CSNP-SSL formulation were characterized for particle size (156.4 ± 12.7 nm and 132.8 ± 17.4 nm), polydispersity index (0.489 ± 0.011 and 0.236 ± 132 0.021), zeta potential (68 ± 16 mV and 37 ± 11 mV), and entrapment efficiency (68.9 ± 2.14%). Physicochemical features of these nanoparticles were characterized using UV-visible and Fourier transform infrared spectroscopy and X-ray diffraction pattern. Scanning electron microscopy studies indicated that CSNPs and CSNP-SSL were spherical in shape with a smooth surface and their particle size ranged between 200 and 500 nm. In vitro release profiles of the optimized formulations showed an initial burst followed by slow and sustained drug release after 18 h (64.2 ± 3.2%) and 48 h (84.6 ± 4.23%), respectively. Additionally, the CSNPs and CSNP-SSL nanoparticles showed a sustained antibacterial action against Staphylococcus aureus (15.7 ± 0.1 and 19.1 ± 1.2 mm) and Escherichia coli (17.5 ± 0.8 and 21.6 ± 1.7 243 mm). Interestingly, CSNP-SSL showed better capability (89.4 ± 1.2% and 95.8 ± 0.7%) than did CSNPs in inhibiting antibiofilm production by Enterobacter tabaci (E2) and Klebsiella quasipneumoniae (SC3). Therefore, CSNPs are a promising dosage form for sustained drug delivery and enhanced antibacterial and antibiofilm activity of SSL; these results could be translated into increased patient compliance.
Assuntos
Quitosana , Nanopartículas , Humanos , Quitosana/química , Antibacterianos/farmacologia , Nanopartículas/química , Biofilmes , Tamanho da Partícula , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
During the current outbreak of the novel coronavirus disease 2019 (COVID-19), researchers have examined several antiviral drugs with the potential to inhibit the proliferation of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The antiviral drug acyclovir (AVR), which is used to treat COVID-19, in complex with methyl-ß-cyclodextrin (Mß-CD) was examined in the solution and solid phases. UV-visible and fluorescence spectroscopic analyses confirmed that the guest (AVR) was included inside the host (Mß-CD) cavity. A solid inclusion complex of AVR was prepared by co-precipitation, physical mixing, kneading, and bath sonication methods at a 1:1 ratio of Mß-CD:AVR. The prepared Mß-CD:AVR inclusion complex was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) analysis. Phase solubility studies indicated the Mß-CD:AVR inclusion complex exhibited a higher stability constant and linear enhancement in AVR solubility with increasing Mß-CD concentrations. In silico analysis of the Mß-CD/AVR inclusion complex confirmed that AVR drugs show potential as inhibitors of SARS-CoV-2 3C-like protease (3CLpro) receptors. Results obtained using the PatchDock and FireDock servers indicated that the most favorable docking ligand was Mß-CD:AVR, which interacted with SARS-CoV-2 (3CLPro) protease inhibitors with high geometric shape complementarity scores (2522 and 5872) and atomic contact energy (-313.77 and -214.70 kcal mol-1). Our results suggest that the Mß-CD/AVR inclusion complex inhibits the main protease of SARS-CoV-2, although further wet-lab experiments are needed to verify these findings.
RESUMO
The effect of sludge retention time (SRT) on biomass, kinetic parameters, and stoichiometric parameters of ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) in anaerobic/anoxic/oxic (A(2)O) process were explored in this study. The results showed that the growth rate constants were 1.52, 1.22, and 0.85 day(-1), respectively, for AOB, those were 1.59, 1.19, and 0.87 day(-1), respectively, for NOB when SRT was 20, 10, and 5 days. The lysis rate constants of AOB and NOB were 0.14 and 0.09 day(-1), respectively. The yield coefficients were 0.23 and 0.22, respectively, for AOB and NOB. They did not change with SRT obviously. The biomass of AOB was 50.94, 26.35, and 14.68 mg L(-1), respectively, and the biomass of NOB was 116.77, 60.00, and 44.25 mg L(-1), respectively, at SRT of 20, 10, and 5 days. When SRT diminished from 20 to 5 days, the biomass of AOB and NOB diminished by 36.26 and 75.52 mg L(-1), respectively. The removal efficiency of NH4 (+)-N diminished by 68.9 %. The removal efficiency of total nitrogen diminished by 42.9 %.
Assuntos
Bactérias/metabolismo , Biomassa , Nitrificação , Esgotos/microbiologiaRESUMO
Municipal solid waste (MSW) incinerator (MSWI) bottom ash and fly ash were used as landfill cover or were co-disposed with MSW to measure their potential metal-releasing and acid-neutralizing capacity (ANC) in landfill sites. Five lysimeters (height 1.2m, diameter 0.2m), simulating landfill conditions, were used in the experiment. Four contained either bottom ash (BA) or fly ash (FA) with BA:MSW ratios of 100 and 200 g L(-1) and FA:MSW ratios of 10 and 20 g L(-1), and the fifth was the control, which contained no ash. The lysimeters were arranged so as to contain four layers, with BA or FA placed on top of MSW within each layer. Each lysimeter was recirculated with 100mL leachate using peristaltic pumps, and 100mL of the leachate was collected weekly to measure the soluble metal concentrations. The results showed that the concentrations of soluble alkali metals measured in the leachate were in the order Ca>K>Na>Mg. In addition, the concentrations of soluble alkali metals of Ca and K collected from the lysimeters containing FA were found to be higher than the concentrations from the lysimeters containing BA. The concentrations of heavy metals (Cd, Cr, Cu, Ni, and Zn) were found to be <1 mg L(-1) except for Pb, which reached 2 mg L(-1). These results suggest that for alkali metals there might be an ANC consistent with the results of an acid titration curve, which would provide suitable conditions for anaerobic digestion of the MSW in the landfill. Furthermore, heavy metals and trace metals were found in concentrations, which were too low to exert inhibitory effects on anaerobic digestion, and thus they could serve as micronutrients to exert beneficial rather than detrimental effects on landfill biostabilization.
Assuntos
Ácidos/química , Incineração/instrumentação , Metais/isolamento & purificação , Eliminação de Resíduos/instrumentação , Metais/químicaRESUMO
Experimental lab scale anaerobic reactors were used to assess the effect of municipal solid waste incinerator (MSWI) bottom ash on the process of biodegradation of organic materials typical of those found in municipal solid waste (MSW). Three reactors were used in the trial and each of these received the same daily organic load of simulated MSW but varying loads of MSWI bottom ash. The reactors were monitored over a period of 200 days for pH, alkalinity, volatile acids, total organic carbon (TOC), biogas production, gas composition and heavy metals. The addition of ash appeared to have beneficial effects on the degradation process as there was an increase in gas production, alkalinity, and pH, coupled with a decrease in the TOC concentration of leachate when compared with a control reactor without MSWI ash addition. After 200 days operation, the alkalinity and gas production in the anaerobic reactor receiving 6g ash per day was twice that of the reactor receiving 3g of ash per day and four times that of the control reactor. A number of tests were carried out on the ash sample to investigate the possible reasons for enhancement of the biodegradative process. These included a shake flask batch leaching test using distilled water, determination of the acid neutralising capacity by titration curve, and the quantification of six heavy metals and four light metals. In the reactors receiving ash the concentrations of Ca, Na, K, Mg ions were found to be significantly higher and these may provide a higher alkalinity which could promote the digestion process. Soluble concentrations of Cd, Cr, Cu, Ni, Pb, and Zn were in the range of 0.02-0.2, 0.01-2.5, 0.01-0.3, 0.01-1, 0.01-1.2, and 0.01-1 mgl(-1) respectively and at these concentrations it is unlikely that they would prove inhibitory to the digestion process.