RESUMO
The strain-induced chirality of cyclophanes has attracted interest within the synthetic community. Herein, we report the synthesis of anilinocyclophanes derived from naturally occurring terpenes, such as citronellol, geraniol, and farnesol. The resulting cyclic oligoprenyl molecules exhibit considerable ring strain (up to 31 kcal/mol), as evident from their bent aniline planes, and possess chirality across the planes of an aryl ring and double bonds. Unexpected outcomes, such as the formation of isomerized neraniline, highlight the influence of ring strain on the stability and reactivity of terpenoid para-cyclophanes.
RESUMO
Correction for 'A chelated borinium cation' by Christopher Major et al., Dalton Trans., 2024, 53, 10075-10078, https://doi.org/10.1039/D4DT01242A.
RESUMO
Two coordinate boron cations are rare. Herein we report the synthesis of [RNSiMe2CH2]2BF (R = Dipp 3, 1-Ad 5) (Dipp = C6H3(iPr)2, Ad = C10H15) via the reaction of BF3 with the corresponding dilithiated diamides. Subsequent abstraction of fluoride provided the corresponding borinium salts, [(RNSiMe2CH2)2B][B(C6F5)4] (R = Dipp 6, 1-Ad 8). While the former was generated, the latter proved isolable and was crystallographically characterized.
RESUMO
Chromium(III) complexes bearing bidentate {NH2(CH2)2PPh2: PN, (S,S)-[NH2(CHPh)2PPh2]: P'N} and tridentate [Ph2P(CH2)2N(H)(CH2)2PPh2: P-NH-P, (S,S)-(iPr)2PCH2CH2N(H)CH(Ph)CH(Ph)PPh2: P-NH-P'] ligands have been synthesized using a mechanochemical approach. The complexes {cis-[Cr(PN)Cl2]Cl (1), cis-[Cr(P'N)Cl2]Cl (2), mer-Cr(P-NH-P)Cl3 (3), and mer-Cr(P-NH-P')Cl3 (4)} were obtained in high yield (95-97%) via the grinding of the respective ligands andthe solid Cr(III) ion precursor [CrCl3(THF)3] with the aid of a pestle and mortar, followed by recrystallization in acetonitrile. The isolated complexes are high spin. A single-crystal X-ray diffraction study of 2 revealed a cationic chromium complex with two P'N ligands in a cis configuration with P' trans to P' with chloride as the counteranion. The X-ray study of 4 shows a neutral Cr(III) complex with the P-NH-P' ligand in a mer configuration. The difference in molecular structures and bulkiness of the ligands influence the electronic, magnetic, and electrochemical properties of the complexes as exhibited by the bathochromic shifts in the electronic absorption peaks of the complexes and the relative increase in the magnetic moment of 3 (4.19 µß) and 4 (4.15 µß) above the spin only value (3.88 µß) for a d3 electronic configuration. Complexes 1-4 were found to be inactive in the hydrogenation of an aldimine [(E)-1-(4-fluorophenyl)-N-phenylmethanimine] under a variety of activating conditions. The addition of magnesium and trimethylsilyl chloride in THF did cause hydrogenation at room temperature, but this occurred even in the absence of the chromium complex. The hydrogen in the amine product came from the THF solvent in this novel reaction, as determined by deuterium incorporation into the product when deuterated THF was used.
RESUMO
The precise synthesis of subporphyrinoid hybrids with π-expanded topologies and unique material properties plays a promising role in the design of functional macrocycles. Easy, selective, and controllable routes to boron subphthalocyanine-subnaphthalocyanine hybrids, Bsub(Pc3-p-Ncp)s, are desirable for this purpose yet synthetically challenging due to random mixtures of Cs-, C3v-, and, in some cases, C1-symmetric compounds that form during traditional statistical mixed cyclotrimerizations. Herein, we addressed this issue by developing a sterically driven mixed cyclotrimerization with enhanced selectivity for the targeted Cs-symmetric hybrid and complete suppression of sterically crowded macrocyclic byproducts. This process, coupled with a rationally designed precursor bearing bulky phenyl substituents, enabled the synthesis and characterization of bay-position phenylated Ph2-(Rp)8Bsub(Pc2-Nc1) hybrids with halogens (Rp = Cl or F) in their peripheral isoindole rings. Reaction selectivity ranged between 59 and 72% with remarkable yields, significantly higher than that of conventional mixed cyclotrimerizations. These findings were augmented by theoretical calculations on precursor Lewis basicity as guiding principles into hybrid macrocycle formation. Additionally, the incorporation of unfused phenyl groups and halogen atoms into the hybrid framework resulted in fine-tuned optical, structural, electronic, and electrochemical properties. This straightforward approach achieved improved selectivity and controlled narrowing of the product distribution, affording the efficient synthesis of structurally sophisticated Bsub(Pc2-Nc1) hybrids. This then expands the library of 3-dimensional π-extended macrocycles for use in a range of applications, such as in optoelectronic devices with precisely tailored optical properties.
RESUMO
para-Substitution reactions on C6F5 rings of Lewis acids have been exploited to achieve triply substituted derivatives. The reaction of B(C6F5)3 with P(SiMe3)3 ultimately affords the Lewis acid B(C6F4P(SiMe3)2)31. This species binds Lewis bases affording the adducts LB(C6F4P(SiMe3)2)3 (L = MeCN 2, OPEt33, PMe34, PBu35) and reacts with LiMe to give the salt [Li][MeB(C6F4P(SiMe3)2)3]·3THF 6. It also reacts with H2O to give (L)B(C6F4PH2)3 (L = H2O 7, MeCN 8). In an analogous fashion, [(C6F5)3PF][B(C6F5)4] was converted to [FP(C6F4P(SiMe3)2)3] [B(C6F5)4] 9 and subsequently to [(MeO)P(C6F4PH2)3][B(C6F5)4] 10.
RESUMO
Discovered in the 19th century, ethyl acetoacetate has been central to the development of organic chemistry, including its pedagogy and applications. In this study, we present borylated derivatives of this venerable molecule. A boron handle has been installed at either α ${{\rm \alpha }}$ - or ß ${\beta }$ -position of acetoacetate by homologation of acyl-MIDA (N-methyliminodiacetic acid) boronates with diazoacetates. Either alkyl or boryl groups were found to migrate with regiochemistry being a function of the steric bulk of the diazo species. Boryl ß ${{\rm \beta }}$ -ketoesters can be further modified into borylated pyrazolones and oximes, thereby expanding the synthetic toolkit and offering opportunities for additional modifications.
RESUMO
The phosphino-phosphenium cation (PPC) [Ph3PPPh2][GaCl4] reacts as a frustrated Lewis pair to add across the NîN bond of (tBuO2CN)2. In contrast, photolytical addition [Ph2ClPPPh2][GaCl4] to (RN)2 results in cleavage of the NîN bond affording [Ph2P(µ-NR)2PPh2Cl][GaCl4] (R = Ph 2, C6H4Cl3). While the chloride of 2 is replaced with N3 or CN via reaction with Me3SiN3 or tBuNC respectively, reaction with (C6F5)2BH effects ring opening to give [HN(Ph)PPh2(µ-NPh)PPh2][GaCl4] 7. This reactivity demonstrates that PPCs behave as FLPs to effect either addition or cleavage of NîN double bonds.
RESUMO
Polar crystalline materials, a subset of the non-centrosymmetric materials, are highly sought after. Their symmetry properties make them pyroelectric and also piezoelectric and capable of second-harmonic generation (SHG). For SHG and piezoelectric applications, metal oxides are commonly used. The advantages of oxides are durability and hardness - downsides are the need for high-temperature synthesis/processing and often the need to include toxic metals. Organic polar crystals, on the other hand, can avoid toxic metals and can be amenable to solution-state processing. While the vast majority of polar organic molecules crystallize in non-polar space groups, we found that both 7-chloro-1,3,5-triazaadamantane, for short Cl-TAA, and also the related Br-TAA (but not I-TAA) form polar crystals in the space group R3m, easily obtained from dichloromethane solution. Measurements confirm piezoelectric and SHG properties for Cl-TAA and Br-TAA. When the two species are crystallized together, solid solutions form, suggesting that properties of future materials can be tuned continuously.
RESUMO
Perovskites with low ionic radii metal centres (for example, Ge perovskites) experience both geometrical constraints and a gain in electronic energy through distortion; for these reasons, synthetic attempts do not lead to octahedral [GeI6] perovskites, but rather, these crystallize into polar non-perovskite structures1-6. Here, inspired by the principles of supramolecular synthons7,8, we report the assembly of an organic scaffold within perovskite structures with the goal of influencing the geometric arrangement and electronic configuration of the crystal, resulting in the suppression of the lone pair expression of Ge and templating the symmetric octahedra. We find that, to produce extended homomeric non-covalent bonding, the organic motif needs to possess self-complementary properties implemented using distinct donor and acceptor sites. Compared with the non-perovskite structure, the resulting [GeI6]4- octahedra exhibit a direct bandgap with significant redshift (more than 0.5 eV, measured experimentally), 10 times lower octahedral distortion (inferred from measured single-crystal X-ray diffraction data) and 10 times higher electron and hole mobility (estimated by density functional theory). We show that the principle of this design is not limited to two-dimensional Ge perovskites; we implement it in the case of copper perovskite (also a low-radius metal centre), and we extend it to quasi-two-dimensional systems. We report photodiodes with Ge perovskites that outperform their non-octahedral and lead analogues. The construction of secondary sublattices that interlock with an inorganic framework within a crystal offers a new synthetic tool for templating hybrid lattices with controlled distortion and orbital arrangement, overcoming limitations in conventional perovskites.
RESUMO
Considering nearly infinite design possibilities, organic second harmonic generation (SHG) molecules are believed to have long-term promise. However, because of the tendency to form dipole-antiparallel crystals that lead to zero macroscopic polarization, it is difficult to design a nonlinear optical (NLO) material based on organic molecules. In this manuscript, we report a new molecule motif that can form asymmetric organic solids by controlling the degree of hydrogen bonding through protonation. A conjugated polar organic molecule was prepared with a triple bond connecting an electron-withdrawing pyridine ring and an electron-donating thiophene ring. By controlling the degree of hydrogen bonding through protonation, two different crystal packing motifs are achieved. One crystallizes into the common dipole-antiparallel nonpolar P1Ì space group. The second crystallizes into the uncommon dipole-parallel polar P1 space group, in which the molecular dipoles are aligned along a single axis and thus exhibit a high macroscopic polarization in its solid-state form. Due to the P1 polar packing, the sample can generate second harmonic light efficiently, about three times the intensity of the benchmark potassium dihydrogen phosphate. Our findings show that crystal engineering by hydrogen bonding in a single molecular backbone can be used for controlling the macroscopic NLO properties.
RESUMO
The discovery of new reactions enables chemists to attain a better understanding of fundamental chemical reactivity and push the boundaries of organic synthesis. Our understanding and manipulation of high-energy states such as reactive conformations, intermediates, and transition structures contribute to this field. Herein we interrogate epoxide ring-closure by inserting the C[double bond, length as m-dash]N functionality into a well-known precursor to nucleophilic epoxide ring-closure. The synthesis of tetrasubstituted, nitrile-tethered epoxides takes place via activation of iminologous diols followed by fragmentation. Mechanistic study reveals the transformation to be stereospecific, which is consistent with the concerted nature of the epoxide ring-closure.
RESUMO
A novel redox-active fluorene monomer is synthesized and copolymerized with 9,9-dioctylfluorene and benzo[c][1,2,5]thiadiazole via Suzuki cross-coupling to produce alternating and tertiary copolymers. Electrochemical and chemical reduction of the copolymers generates organic polymeric radical anions. Electrochemical, spectroscopic, and photophysical characterization grant insight into the structure-property relationship for open-shell conjugated polymers.
RESUMO
A variety of transition metal complexes bearing aminoquinoline PNHH'-R ligands R = Ph (L1H), Cy (L2H) and their amido analogues are reported for rhodium(I) ([Rh(L1H)(PPh3)]+1 and Rh(L1)(PPh3) 2), cobalt(II) (Co(L2)(Cl) 3), and iron(II) ([Fe(L1H)2]2+5, Fe(L1)26, and [Fe(C5Me5)(L1H)]PF67). The acid-base and redox properties of the amido complexes 2, 6, and their protio parent complexes 1, and 5 permit the determination of the pKa and bond dissociation free energy (BDFE) of their N-H bonds while the ligand scaffold is coordinated to metal centres of square planar and octahedral geometry, respectively. From relative concentrations obtained by the use of 31P{1H} NMR spectroscopy, a pKaTHF value of 14 is calculated for rhodium complex 1, 6.4 for iron complex 5, and 24 for iron complex 7. These data, when combined with elecrochemical potentials obtained via cyclic voltammetry, allow the calculations of BDFE values for the N-H bond of 69 kcal mol-1 for 1, and of 55 kcal mol-1 for 5.
Assuntos
Ródio , Aminoquinolinas , Cobalto , Eletrônica , Ferro/química , Ligantes , Ródio/químicaRESUMO
The coordination chemistry of the title ligands with Mo metal centers was investigated. Thus, the synthesis and characterization (NMR, X-ray diffraction) of four mononuclear formally Mo(6+) complexes of (Z)-1-R-2-(4',4'-dimethyl-2'-oxazolin-2'-yl)-eth-1-en-1-ates (L: R = -Ph, -Ph-p-NO2, -Ph-p-OMe and -t-Bu), derived from the part enols (LH), is described. The resulting air-stable MoO2L2 complexes (1-4) exist, as shown by single-crystal X-ray diffraction experiments, in the cis-dioxido-trans(N)-κ2-N,O-L conformation in the solid state for all four examples. This situation was further probed using semi-empirical PM6(tm) calculations. Complexes 1-4 represent the first Mo complexes of this ligand class and, indeed, of Group 6 metals in general. Structural and spectroscopic comparisons were made between these and related Mo(6+) compounds. Complex 1 (R = -Ph) was studied for its ability to selectively catalyze the production of poly-norbornene from the monomer in the presence of MAO. This, unfortunately, only resulted in the synthesis of insoluble, presumably highly cross-linked, polymeric and/or oligomeric materials. However, complexes 1-4 were demonstrated to be highly effective for catalyzing benzoin to benzil conversion using DMSO as the O-transfer agent. This catalysis work is likewise put into perspective with respect to analogous Mo(6+) complexes.
RESUMO
Hybrid organic-inorganic perovskites (HOIPs) have garnered widespread interest, yet stability remains a critical issue that limits their further application. Compared to their three-dimensional (3D) counterparts, two-dimensional (2D)-HOIPs exhibit improved stability. 2D-HOIPs are also appealing because their structural and optical properties can be tuned according to the choice of organic ligand, with monovalent or divalent ligands forming Ruddlesden-Popper (RP) or Dion-Jacobson (DJ)-type 2D perovskites, respectively. Unlike RP-type 2D perovskites, DJ-type 2D perovskites do not contain a van der Waals gap between the 2D layers, leading to improved stability. However, bifunctional organic ligands currently used to develop DJ-type 2D perovskites are limited to commercially available aliphatic and single-ring aromatic ammonium cations. Large conjugated organic ligands are in demand for their semiconducting properties and their potential to improve materials stability further. In this manuscript, we report the design and synthesis of a new set of larger conjugated diamine ligands and their incorporation into DJ-type 2D perovskites. Compared with analogous RP-type 2D perovskites, DJ 2D perovskites reported here show blue-shifted, narrower emissions and significantly improved stability. By changing the structure of rings (benzene vs thiophene) and substituents, we develop structure-property relationships, finding that fluorine substitution enhances crystallinity. Single-crystal structure analysis and density functional theory calculations indicate that these changes are due to strong electrostatic interactions between the organic templates and inorganic layers as well as the rigid backbone and strong π-π interaction between the organic ligands themselves. These results illustrate that targeted engineering of the diamine ligands can enhance the stability of DJ-type 2D perovskites.
RESUMO
A novel complex has been prepared using the (E)-4-nitro-N-(pyridin-2-ylmethylidene)aniline bidentate Schiff base ligand and PtCl2, namely, dichlorido[(E)-4-nitro-N-(pyridin-2-ylmethylidene)aniline-κ2N,N']platinum(II) acetonitrile hemisolvate, [PtCl2(C12H9N3O2)]·0.5CH3CN, 1. According to the X-ray measurements of the crystal structure, the PtII ion adopts a PtCl2N2 square-planar coordination. The coordination of the Schiff base ligand to the PtII ion occurs in a cyclic bidentate fashion, as a result of which a five-membered metallacycle is formed. Furthermore, in the structure of 1, the neutral molecules form a one-dimensional chain structure through C-H...Cl and C-H...O hydrogen bonds. The characterization of the complex was performed via single-crystal X-ray diffraction, IR spectroscopy and elemental analysis, and the antioxidant activity of the complex was evaluated using spectrophotometry by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) method.
Assuntos
Antioxidantes/química , Complexos de Coordenação/química , Platina/química , Bases de Schiff/química , Compostos de Anilina/química , Antioxidantes/farmacologia , Cristalografia por Raios X , Ligação de Hidrogênio , Estrutura Molecular , Compostos Organoplatínicos/químicaRESUMO
In the title compound (systematic name: bis-{1,2-bis[12,14-dioxa-13-phospha-penta-cyclo-[13.8.0.02,11.03,8.018,23]tricosa-1(15),2(11),3(8),4,6,9,16,18(23),19,21-deca-en-13-yl]ethane}-dichlorido-iron(II) di-chloro-methane disolvate), [FeCl2(C42H28O4P2)2]·2CH2Cl2, the FeII ion lies on a crystallographic twofold rotation axis and is coordinated by four P atoms from two (R,R)-1,2-bis-(bi-naphthyl-phospho-n-ito)ethane (BPE) ligands and two Cl ligands in a distorted cis-FeCl2P4 octa-hedral coordination geometry. In the crystal, weak C-Hâ¯O and C-Hâ¯π inter-actions link the mol-ecules into layers lying parallel to (001). A weak intra-molecular C-Hâ¯O hydrogen bond is also observed. The asymmetric unit contains one CH2Cl2 solvent mol-ecule, which is disordered over two sets of site with refined occupancies in the ratio 0.700â (6):0.300â (6).
RESUMO
The synthesis and use of the first examples of unsymmetrical, mixed phosphine donor tripodal NPP2' ligands N(CH2CH2PR2)2(CH2CH2PPh2) are presented. The ligands are synthesized via a convenient, one pot reductive amination using 2-(diphenylphosphino)ethylamine and various substituted phosphonium dimers in order to introduce mixed phosphine donors substituted with P/P', those being Ph/Cy (2), Ph/iPr (3), Ph/iBu (4), Ph/o-Tol (5), and Ph/p-Tol (6). Additionally, we have developed the first known synthesis of a symmetrical tripodal NP3 ligand N(CH2CH2PiBu2)3 using bench safe ammonium acetate as the lone nitrogen source (7). This new protocol eliminates the use of extremely dangerous nitrogen mustard reagents typically required to synthesize NP3 ligands. Some of these tetradentate ligands and also P2NN' ligands N(CH2-o-C5H4N)(CH2CH2PR2)2 (P2NN'-Cy, R = Cy; P2NN'-Ph, R = Ph) prepared by reductive amination using 2-picolylamine are used in the synthesis and reactions of iron complexes. FeCl2(P2NN'-Cy) (8) undergoes single halide abstraction with NaBPh4 to give the trigonal bipyramidal complex [FeCl(P2NN'-Cy)][BPh4] (9). Upon exposure to CO(g), complex 9 readily coordinates CO giving [FeCl(P2NN'-Cy)(CO)][BPh4] (10), and further treatment with an excess of NaBH4 results in formation of the hydride complex [Fe(H)(P2NN'-Cy)(CO)][BPh4] (11). Our previously reported complex FeCl2(P2NN'-Ph) undergoes double halide abstraction with NaBPh4 in the presence of the coordinating solvent to give [Fe(NCMe)2(P2NN'-Ph)][BPh4]2 (12). Ligand 3 can be coordinated to FeCl2, and upon sequential halide abstraction, treatment with NaBH4, and exposure to an atmosphere of dinitrogen, the dinitrogen hydride complex [Fe(H)(NPP2'-iPr)(N2)][BPh4] (13) is isolated. Our symmetrical NP3 ligand 7 can also be coordinated to FeCl2 and, upon exposure to an atmosphere of CO(g), selectively forms [FeCl(NP3)(CO)][BPh4] (14) after salt metathesis with NaBPh4. Complex 14 can be treated with an excess of NaBH4 to give the hydride complex [Fe(H)(NP3)(CO)][BPh4] (15), which can further be deprotonated/reduced to the Fe(0) complex Fe(NP3)(CO) (16) upon treatment with an excess of KH.
RESUMO
Sodium cyanoborohydride-derived N-alkylnitriliumboranes were found to be versatile precursors for the synthesis of novel boron-containing heterocycles. The reaction between N-alkylnitriliumboranes and 2-aminopyridines, imidazoles, oxazoles, or isoxazoles leads to the incorporation of the [B-C] motif into a five-membered boramidine, which exists as a mixture of Z and E isomers. The resulting heterocycles are blue fluorescent in both the solid state and in solution with ca. 2700-8400 cm-1 Stokes shifts and quantum yields in the 65-74% range in water and in the 42-84% range in organic solvents. The combination of photophysical properties, structural tunability, stability, and solubility in various media is expected to find application in a range of disciplines.