RESUMO
BACKGROUND: Transthoracic echocardiography (TTE) is currently recognized as the potential first-line imaging test for patients with suspected acute type A aortic syndrome (AAAS). Direct TTE sign for detecting AAAS is positive if there is an intimal flap separating two aortic lumens or aortic wall thickening seen in the ascending aorta. Indirect TTE sign indicates high-risk features of AAAS, such as aortic root dilatation, pericardial effusion, and aortic regurgitation. Our aim is to summarize the existing clinical evidence regarding the diagnostic accuracy of TTE and to evaluate its potential role in the management of patients with suspected AAAS. METHODS: We included prospective or retrospective diagnostic cohort studies, written in any language, that specifically focused on using TTE to diagnose AAAS from databases such as PubMed, EMBASE, MEDLINE, and the Cochrane Library. The pooled sensitivity, specificity, positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic odds ratio [1], and hierarchical summary receiver-operating characteristic (HSROC) curve were calculated for TTE in diagnosing AAAS. We applied Quality Assessment of Diagnostic Accuracy (QUADAS-2) tool and Grading of Recommendations, Assessment, Development and Evaluation (GRADE) quality assessment criteria. RESULTS: Ten studies (2886 patients) were included in the meta-analysis. The pooled sensitivity and specificity of direct TTE signs were 58% (95% CI, 38-76%) and 94% (95% CI, 89-97%). For any TTE signs, the pooled sensitivity and specificity were 91% (95% CI, 85-94%) and 74% (95% CI, 61-84%). The diagnostic accuracy of direct TTE signs was significantly higher than that of any TTE signs, as measured by the area under the HSROC curve [0.95 (95% CI, 0.92-0.96) vs. 0.87 (95% CI, 0.84-0.90)] in four studies. CONCLUSIONS: Our study suggests that TTE could serve as the initial imaging test for patients with suspected AAAS. Given its high specificity, the presence of direct TTE signs may indicate AAAS, whereas the absence of any TTE signs, combined with low clinical suspicion, could suggest a lower likelihood of AAAS.
RESUMO
Surface defect passivation and carrier injection regulation have emerged as effective strategies for enhancing the performance of perovskite light-emitting diodes (Pero-LEDs). It usually requires two functional molecules to realize defect passivation and carrier injection regulation separately. In other words, developing one single molecule possessing these capabilities remains challenging. Herein, we utilized π-conjugated fluorene derivatives as surface treatment materials, 9,9-Spirobi[fluorene] (SBF), 9,9-Spirobifluoren-2-yl-diphenylphosphine oxide (SPPO1), and 2,7-bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13), to investigate the influence of their chemical structure on device optoelectronic performance, especially for defect passivation and carrier injection regulation. Consequently, the passivation capability of double-bonded SPPO13 surpassed single-bonded SPPO1 and nonbonded SBF, which all showed excellent electron transport properties, enhancing electron injection. The maximum external quantum efficiencies (EQE) for Pero-LEDs treated with SBF, SPPO1, and SPPO13 were 8.13, 17.48, and 22.10%, respectively, exceeding that of the derivative-free device (6.55%). Notably, SPPO13-treated devices exhibited exceptional reproducibility, yielding an average EQE of 20.00 ± 1.10% based on 30 devices. This result emphasizes the potential of tailored fluorene derivatives for enhancing the device performance of Pero-LEDs.
RESUMO
Layered metal-halide perovskites, a category of self-assembled quantum wells, are of paramount importance in emerging photonic sources, such as lasers and light-emitting diodes (LEDs). Despite high trap density in two-dimensional (2D) perovskites, efficient non-radiative energy funneling from wide- to narrow-bandgap components, sustained by the Förster resonance energy transfer (FRET) mechanism, contributes to efficient luminescence by light or electrical injection. Herein, it is demonstrated that bandgap extension of layered perovskites to the blue-emitting regime will cause sluggish and inefficient FRET, stemming from the tiny spectral overlap between different phases. Motivated by the importance of blue LEDs and inefficient energy transfer in materials with phase polydispersity, wide-bandgap quasi-2D perovskites with narrow phase distribution, improved crystallinity, and the pure crystal orientation perpendicular to the charge transport layer are developed. Based on this emitter, high-performance blue perovskite LEDs with improved electroluminescence (EL) external quantum efficiency (EQE) of 7.9% at 478 nm, a narrow full width at half-maximum (FWHM) of 22 nm and a more stable EL spectra are achieved. These results provide an important insight into spectrally stable and efficient blue emitters and EL devices based on perovskites.
RESUMO
Circularly polarized light-emitting diodes (CP-LEDs) are critical for next-generation optical technologies, ranging from holography to quantum information processing. Currently deployed chiral luminescent materials, with their intricate synthesis and processing and limited efficiency, are the main bottleneck for CP-LEDs. Chiral metal nanoclusters (MNCs) are potential CP-LED materials, given their ease of synthesis and processability as well as diverse structures and excited states. However, their films are usually plagued by inferior electronic quality and aggregation-caused photoluminescence quenching, necessitating their incorporation into host materials; without such a scheme, MNC-based LEDs exhibit external quantum efficiencies (EQEs) < 10%. Herein, we achieve an efficiency leap for both CP-LEDs and cluster-based LEDs by using novel chiral MNCs with aggregation-induced emission enhancement. CP-LEDs using enantiopure MNC films attain EQEs of up to 23.5%. Furthermore, by incorporating host materials, the devices yield record EQEs of up to 36.5% for both CP-LEDs and cluster-based LEDs, along with electroluminescence dissymmetry factors (|gEL|) of around 1.0 × 10-3. These findings open a new avenue for advancing chiral light sources for next-generation optoelectronics.
RESUMO
Efficient charge injection and radiative recombination are essential to achieving high-performance perovskite light-emitting diodes (Pero-LEDs). However, the perovskite emission layer (EML) and the electron transport layer (ETL) form a poor physically interfacial contact and non-negligible charge injection barrier, limiting the device performance. Herein, we utilize a phosphine oxide, 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T), to treat the perovskite/ETL interface and form a chemically bonded contact. Specifically, PO-T2T firmly bonds on the perovskite's surface and grain boundaries through a dative bond, effectively passivating the uncoordinated lead defects. Additionally, PO-T2T has high electron mobility and establishes an electron transport highway to bridge the ETL and EML. As a result, a maximum external quantum efficiency (EQEmax) of 22.06% (average EQEmax of 20.02 ± 1.00%) and maximum luminance (Lmax) of 103286 cd m-2 have been achieved for the champion device. Our results indicate that EML/ETL interface modifications are crucial for the fabrication of highly efficient Pero-LEDs.
RESUMO
This study is aimed at investigating the correlations of PCSK9 and LDLR gene polymorphisms as well as serum proprotein convertase subtilisin/kexin type 9 (PCSK9) levels with atherosclerosis and lipid metabolism in patients on maintenance hemodialysis (HD). A single nucleotide polymorphism at the E670G locus of the PCSK9 gene and the rs688 locus of the LDLR gene was analyzed by polymerase chain reaction-restriction fragment length polymorphism. All study subjects' blood lipid (triglyceride [TG], total cholesterol [TC], high-density lipoprotein cholesterol [HDL-C], and low-density lipoprotein cholesterol [LDL-C]) concentrations and lipoprotein(a) and PCSK9 levels were measured. The differences in blood lipid levels between different genotypes of the E670G locus of the PCSK9 gene and the rs688 locus of the LDLR gene in patients on maintenance HD with atherosclerosis were compared. Patients on maintenance HD with atherosclerosis at the E670G locus of the PCSK9 gene AG + GG genotype had higher levels of TG, TC, LDL-C, and lipoprotein(a) than the AA genotype, and lower levels of HDL-C than the AA genotype. Patients on maintenance HD with atherosclerosis at the rs688 locus of the LDLR gene CT + TT genotype had higher levels of TG, TC, LDL-C, and lipoprotein(a) than the CC genotype, and lower levels of HDL-C than the CC genotype. Serum PCSK9 contents in patients on maintenance HD with atherosclerosis were positively correlated with lipid indices (TG, TC, LDL-C, and lipoprotein(a)) and carotid ultrasound indices (intima-media thickness and resistance index), and negatively correlated with HDL-C, maximum systolic blood flow velocity, and minimum diastolic blood flow velocity (all P < .05).
Assuntos
Aterosclerose , Pró-Proteína Convertase 9 , Humanos , Pró-Proteína Convertase 9/genética , LDL-Colesterol , Metabolismo dos Lipídeos/genética , Espessura Intima-Media Carotídea , Aterosclerose/genética , Polimorfismo de Nucleotídeo Único , Lipídeos , Triglicerídeos , HDL-Colesterol , Diálise Renal , Lipoproteína(a)/genética , Lipoproteína(a)/metabolismoRESUMO
Inorganic halide perovskite nanocrystals (NCs) are being widely explored as next-generation optoelectronic materials. Critical to understanding the optoelectronic properties and stability behavior of perovskite NCs is the material's surface structure, where the local atomic configuration deviates from that of the bulk. Through low-dose aberration-corrected scanning transmission electron microscopy and quantitative imaging analysis techniques, we directly observed the atomic structure at the surface of the CsPbBr3 NCs. CsPbBr3 NCs are terminated by a Cs-Br plane, and the surface Cs-Cs bond length decreases significantly (â¼5.6%) relative to the bulk, imposing compressive strain and inducing polarization, which we also observed in CsPbI3 NCs. Density functional theory calculations suggest such a reconstructed surface contributes to the separation of holes and electrons. These findings enhance our fundamental understanding of the atomic-scale structure, strain, and polarity at the surface of inorganic halide perovskites and provide valuable insights into designing stable and efficient optoelectronic devices.
RESUMO
Background: Esophageal cancer is a highly malignant neoplasm with poor prognosis. Of its patients, upper gastrointestinal bleeding (UGIB) is one of the most challenging and threatening conditions in the emergency department (ED). However, no previous studies have analyzed the etiologies and clinical outcomes in this specific population. This study aimed to identify the clinical characteristics and risk factors for 30-day mortality in esophageal cancer patients with UGIB. Methods: This retrospective cohort study enrolled 249 adult patients with esophageal cancer presenting with UGIB in the ED. Patients was divided into the survivor and non-survivor groups, and their demographic information, medical history, comorbidities, laboratory parameters, and clinical findings were recorded. The factors associated with 30-day mortality were identified using Cox's proportional hazard model. Results: Among the 249 patients in this study, 30-day mortality occurred in 47 patients (18.9%). The most common causes of UGIB were tumor ulcer (53.8%), followed by gastric/duodenal ulcer (14.5%), and arterial-esophageal fistula (AEF) (12.0%). Multivariate analyses indicated that underweight (HR = 2.02, p = 0.044), history of chronic kidney disease (HR = 6.39, p < 0.001), active bleeding (HR = 2.24, p = 0.039), AEF (HR = 2.23, p = 0.046), and metastatic lymph nodes (HR = 2.99, p = 0.021) were independent risk factors for 30-day mortality. Conclusions: The most common cause of UGIB in esophageal cancer patients was tumor ulcer. AEF, accounting for 12% of UGIB in our study, is not an uncommon cause. Underweight, underlying chronic kidney disease, active bleeding, AEF, and tumor N stage > 0 were independent risk factors for 30-day mortality.
RESUMO
Purpose: This study was aimed at identifying hub genes and ceRNA regulatory networks linked to prognosis in hepatocellular carcinoma (HCC) and to identify possible therapeutic targets. Methods: Differential expression analyses were performed to detect the differentially expressed genes (DEGs) in the four datasets (GSE76427, GSE6764, GSE62232, and TCGA). The intersected DEmRNAs were identified to explore biological significance by enrichment analysis. We built a competitive endogenous RNA (ceRNA) network of lncRNA-miRNA-mRNA. The mRNAs of the ceRNA network were used to perform Cox and Kaplan-Meier analyses to obtain prognosis-related genes, followed by the selection of genes with an area under the curve >0.8 to generate the random survival forest model and obtain feature genes. Furthermore, the feature genes were subjected to least absolute shrinkage and selection operator (LASSO) and univariate Cox analyses were used to identify the hub genes. Finally, the infiltration status of immune cells in the HCC samples was determined. Results: A total of 1923 intersected DEmRNAs were identified in four datasets and involved in cell cycle and carbon metabolism. ceRNA network was created using 10 lncRNAs, 67 miRNAs, and 1,923 mRNAs. LASSO regression model was performed to identify seven hub genes, SOCS2, MYOM2, FTCD, ADAMTSL2, TMEM106C, LARS, and KPNA2. Among them, TMEM106C, LARS, and KPNA2 had a poor prognosis. KPNA2 was considered a key gene base on LASSO and Cox analyses and involved in the ceRNA network. T helper 2 cells and T helper cells showed a higher degree of infiltration in HCC. Conclusion: The findings revealed seven hub genes implicated in HCC prognosis and immune infiltration. A corresponding ceRNA network may help reveal their potential regulatory mechanism.
RESUMO
Background: Early recognition of patients with community-acquired pneumonia (CAP) at risk of poor outcomes is crucial. However, there is no effective assessment tool for predicting the development of respiratory failure in patients with CAP. Diaphragmatic ultrasonography (DUS) is a novel technique developed for evaluating diaphragmatic function via measurements of the diaphragm thickening fraction (DTF) and diaphragm excursion (DE). This study evaluated the accuracy of DUS in predicting the development of respiratory failure in patients with CAP, as well as the feasibility of its use in the emergency department (ED) setting. Materials and methods: This was a single-center prospective cohort study. We invited all patients with ED aged ≥ 20 years who were diagnosed with CAP of pneumonia severity index (PSI) SIe diagnosed with CAP of pneumonia severe with respiratory failure or septic shock were excluded. Two emergency physicians performed DUS to obtain DTF and DE measurements. Data were collected to calculate PSI, CURB-65 score, and Infectious Diseases Society of America/American Thoracic Society severity criteria. Study endpoints were taken at the development of respiratory failure or 30 days post-ED presentation. Continuous variables were analyzed using T-tests, while categorical variables were analyzed using chi-square tests. Further logistic regression and receiver operating characteristic curve analyses were performed to examine the ability to predict the development of respiratory failure. Intra- and inter-rater reliability was examined with intraclass correlation coefficients (ICCs). Results: In this study, 13 of 50 patients with CAP enrolled developed respiratory failure. DTF was found to be an independent predictor (OR: 0.939, p = 0.0416). At the optimal cut-off point of 23.95%, DTF had 69.23% of sensitivity, 83.78% of specificity, 88.57% of negative predictive value, and 80% of accuracy. Intra- and inter-rater analysis demonstrated good consistency (intra-rater ICC 0.817, 0.789; inter-rater ICC 0.774, 0.781). Conclusion: DUS assessment of DTF may reliably predict the development of respiratory failure in patients with CAP presenting to the ED. Patients with DTF > 23.95% may be considered for outpatient management.
RESUMO
BACKGROUND: Although tumors of the lacrimal sac are rare, they represent a potentially life-threatening situation that can easily be overlooked since patients present with features consistent with chronic dacryocystitis. Lacrimal sac squamous cell carcinoma is the most common lacrimal sac malignancy, but no definitive treatment is currently available. CASE SUMMARY: We describe a 34-year-old unmarried male who presented with a red and swollen right lower eyelid, which gradually developed into a mass of the lower eyelid that obstructed vision in his right eye. He was treated with transcatheter arterial infusion chemotherapy and interventional embolization based on the tumor characteristics, and we also administered intensity-modulated radiotherapy and targeted therapy after tumor shrinkage. The tumor treatment demonstrated good efficacy, and the patient's condition was stable after 10 mo of follow-up. CONCLUSION: To our knowledge, this is the first report of lacrimal sac squamous cell carcinoma treated with transcatheter arterial infusion chemotherapy and interventional embolization, which might expand clinical treatment options for lacrimal sac carcinoma.
RESUMO
Point-of-care ultrasonography (POCUS) has become the most popular modality of testing for physicians in recent years and is used for improving the quality of care and increasing patient safety. However, POCUS is not always acceptable to all physicians. To address the benefits and importance of POCUS, numerous studies have examined the use of POCUS in clinical practice and even medical education. This article aims to highlight the effects of POCUS as an extension of the physical examination, and we present a case to address the reasons it should be performed. For a man experiencing abdominal pain immediately after his feeding jejunostomy tube was changed, there was high suspicion of small-bowel volvulus after a "whirlpool sign" was observed during the POCUS, whereby mesenteric vessels presented in a whirling or spiral shape. This impression was subsequently confirmed by computed tomography. Small-bowel volvulus is a rare complication of changing a feeding jejunostomy tube. The images submitted here add to the sparse evidence from the literature on the use of POCUS as an extension of the physical examination for evaluating abdominal pain. POCUS can be used after taking the patient's history and conducting a physical examination. The observation of a whirlpool sign may indicate the presence of a volvulus that is life-threatening.
RESUMO
BACKGROUND: Acute head and neck cancer (HNC) bleeding is a life-threatening situation that frequently presents to the emergency department (ED). The purpose of the present study was to analyze the risk factors for the 30-day mortality in patients with HNC bleeding. METHODS: We included patients who presented to the ED with HNC bleeding (n = 241). Patients were divided into the survivor and nonsurvivor groups. Variables were compared, and the associated factors were examined with Cox's proportional hazard model. RESULTS: Of the 241 patients enrolled, the most common bleeding site was the oral cavity (n = 101, 41.9%). More than half of the patients had advanced HNC stage while 41.5% had local recurrence. The proportion of active bleeding was significantly higher in the nonsurvivor group (70.5% vs. 53.3%, p = 0.038). 42.3% received blood transfusion and 5.0% required inotropic support. In total, 21.2% of the patients experienced rebleeding, and 18.3% died within 30 days. Multivariate analyses indicated that a heart rate > 100 (beats/min) (HR = 2.42; Cl 1.15-5.06; p = 0.019) and inotropic support (HR = 3.00; Cl 1.14-7.89; p = 0.026) were statistically significant independent risk factors for 30-day mortality. CONCLUSIONS: The results of this study may aid physicians in the evaluation of short-term survival in HNC bleeding patients and provide critical information for risk stratification and medical decisions.
Assuntos
Neoplasias de Cabeça e Pescoço , Serviço Hospitalar de Emergência , Neoplasias de Cabeça e Pescoço/complicações , Hemorragia/etiologia , Humanos , Modelos de Riscos Proporcionais , Fatores de RiscoRESUMO
A series of BaAl12O19:Sm2+/SrAl12O19:Sm3+ mixed-phase phosphors were produced in one step using the traditional high-temperature solid-phase process. Because Sm is divalent in BaAl12O19 and trivalent in SrAl12O19, the coexistence of Sm2+ and Sm3+ is realized in the mixed-phase host. Since the temperature sensitivity of Sm2+ and Sm3+ in the solid solution host is significantly different, this makes it possible for the sample to measure temperature based on the fluorescence intensity ratio (FIR). The crystal model, ion emission spectrum, and temperature sensitivity of these phosphors are studied in detail. Under the co-excitation of a 410 nm excitation source, this sample has excellent temperature measurement performance in the range of 313-513 K. Based on the FIR method, the maximum absolute temperature sensitivity (Sa) is 0.55 K-1 at 513 K, and the maximum relative temperature sensitivity (Sr) is 2.47%K-1 at 453 K. Moreover, based on the photoluminescence lifetime temperature measurement mode, the largest value of Sa at 413 K is 0.046 K-1, and the maximum value of Sr at 473 K is 3.10%K-1. In short, the BaAl12O19:Sm2+/SrAl12O19:Sm3+ solid solution is a kind of phosphor with nice temperature measurement ability, and it has very strong potential in the application of noncontact optical thermometers.
RESUMO
Recently, surface passivation has been proved to be an essential approach for obtaining efficient and stable perovskite light-emitting diodes (Pero-LEDs). Phosphine oxides performed well as passivators in many reports. However, the most commonly used phosphine oxides are insulators, which may inhibit carrier transport between the perovskite emitter and charge-transporter layers, limiting the corresponding device performance. Here, 2,7-bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13), a conductive molecule with two phosphine oxide functional groups, is introduced to modify the perovskite emitting layer. The bifunctional SPPO13 can passivate the nonradiative defects of perovskite and promote electron injection at the interface of perovskite emitter and electron-transporter layers. As a result, the corresponding Pero-LEDs obtain a maximum external quantum efficiency (EQE) of 22.3%. In addition, the Pero-LEDs achieve extremely high brightness with a maximum of around 190â¯000 cd/m2.
RESUMO
Background and Objectives: Septic arthritis is a medical emergency associated with high morbidity and mortality. The incidence rate of septic arthritis among dialysis patients is higher than the general population, and dialysis patients with bacteremia frequently experience adverse outcomes. The aim of this study was to identify the clinical features and risk factors for longer hospital length of stay (LOS), positive blood culture, and in-hospital mortality in dialysis patients with septic arthritis. Materials and Methods: The medical records of 52 septic arthritis dialysis patients admitted to our hospital from 1 January 2009 to 31 December 2020 were analyzed. The primary outcomes were bacteremia and in-hospital mortality. Variables were compared, and risk factors were evaluated using linear and logistic regression models. Results: Twelve (23.1%) patients had positive blood cultures. A tunneled cuffed catheter for dialysis access was used in eight (15.4%) patients, and its usage rate was significantly higher in patients with positive blood culture than in those with negative blood culture (41.7 vs. 7.5%, p = 0.011). Fever was present in 15 (28.8%) patients, and was significantly more frequent in patients with positive blood culture (58.3 vs. 20%, p = 0.025). The most frequently involved site was the hip (n = 21, 40.4%). The most common causative pathogen was Gram-positive cocci, with MRSA (n = 7, 58.3%) being dominant. The mean LOS was 29.9 ± 25.1 days. The tunneled cuffed catheter was a significant predictor of longer LOS (Coef = 0.49; Cl 0.25−0.74; p < 0.001). The predictors of positive blood culture were fever (OR = 4.91; Cl 1.10−21.83; p = 0.037) and tunneled cuffed catheter (OR = 7.60; Cl 1.31−44.02; p = 0.024). The predictor of mortality was tunneled cuffed catheter (OR = 14.33; Cl 1.12−183.18; p = 0.041). Conclusions: In the dialysis population, patients with tunneled cuffed catheter for dialysis access had a significantly longer hospital LOS. Tunneled cuffed catheter and fever were independent predictors of positive blood culture, and tunneled cuffed catheter was the predictor of in-hospital mortality. The recognition of the associated factors allows for risk stratification and determination of the optimal treatment plan in dialysis patients with septic arthritis.
Assuntos
Artrite Infecciosa , Bacteriemia , Artrite Infecciosa/epidemiologia , Artrite Infecciosa/etiologia , Bacteriemia/complicações , Bacteriemia/epidemiologia , Cateteres de Demora/efeitos adversos , Hospitais , Humanos , Diálise Renal/efeitos adversosRESUMO
All-inorganic and lead-free CsSnI3 is emerging as one of the most promising candidates for near-infrared perovskite light-emitting diodes (NIR Pero-LEDs), which find practical applications including facial recognition, biomedical apparatus, night vision camera, and Light Fidelity. However, in the CsSnI3 -based Pero-LEDs, the holes injection is significantly higher than that of electrons, resulting in unbalanced charge injection, undesired exciton dissipation, and poor device performance. Herein, it is proposed to manage charge injection and recombination behavior by tuning the interface area of perovskite and charge-transporter. A dendritic CsSnI3 structure is prepared on the hole-transporter, only making a bottom contact with the hole-transporter and exposing all other available crystal surfaces to the electron-transporter. In other words, the interface area of perovskite/electron-transporter is significantly higher than that of perovskite/hole-transporter. Moreover, the embedding interface of perovskite/electron-transporter can spatially confine holes and electrons, increasing the radiation recombination. By taking advantage of the dendritic structure, efficient lead-free NIR Pero-LEDs are achieved with a record external quantum efficiency (EQE) of 5.4%. More importantly, the dendritic structure shows great superiorities in flexible devices, for there is almost no morphology change after 2000-cycles of bends, and the fabricated Pero-LEDs can keep 93.4% of initial EQEs after 50-cycles of bends.
RESUMO
BACKGROUND: Ovarian serous cystadenocarcinoma (OSCC) is a life-threatening malignancy with poor prognosis. Therefore, the identification of immune-related genes associated with OSCC prognosis may reveal new targets of immunotherapy for OSCC. PATIENTS AND METHODS: The gene expression profiles of overlapped genes were extracted by weighted gene co-expression network analysis (WGCNA) to identify immune-related modules. Significant genes were identified by univariate Cox regression analysis of model genes. Model characteristic genes were obtained by least absolute shrinkage and selection operator (LASSO) analysis and used to calculate a "signature index". The model's ability to predict prognosis in OSCC patients was assessed using time-dependent receiver operator characteristic curves. Differences in the biological processes and Kyoto Encyclopedia of Genes and Genomes pathways between groups with high or low signature index were assessed using gene set enrichment analysis (GSEA). The types of immune cells and their abundance in the two index groups were explored by single-sample GSEA. RESULTS: The expression profiles of 3517 overlapped genes were extracted by WGCNA, and nine modules related to the immune system of OSCC were obtained. The expression profiles of 114 hub genes were then subjected to LASSO analysis. Among them, 10 immune-related genes were significant, of which six were identified as model characteristic genes and were used to calculate the signature index. Moreover, 24 types of immune cells were identified in the tumor microenvironment, and their abundance was explored in high- and low-signature index groups of two datasets. CONCLUSION: ARHGEF18, PLEKHA7, MTOR, VPS45, BRCA1, and HINT2 were identified as characteristic genes and used to develop a new immune-related gene-based signature as a promising prognostic biomarker for OSCC.
RESUMO
Fullerene-based electron-transporting layers (ETLs) significantly influence the defect passivation and device performance of inverted perovskite solar cells (PSCs). However, the π-cage structures of fullerenes lead to a strong tendency to self-aggregate, which affects the long-term stability of the corresponding PSCs. Experimental results revealed that [6,6]-phenyl-C61-butyric acid methyl ester (PCBM)-based ETLs exhibit a certain degree of self-aggregation that affects the stability of the device, particularly under continuous irradiation stress. To modulate the aggregation behavior, we replaced a methyl hydrogen of PCBM with a phenyl group to yield [6,6]-phenyl-C61-butyric acid benzyl ester (PCBB). As verified through X-ray crystallography, this minor structural modification results in more non-covalent intermolecular interactions, which effectively enhanced the electron-transporting ability of the PCBB-based ETL and led to an efficiency approaching 20%. Notably, the enhanced intermolecular forces of PCBB suppressed its self-aggregation, and the corresponding device showed significantly improved stability, retaining approximately 90% of its initial efficiency after 600 h under one-sun irradiation with maximum power point tracking. These findings provide a viable approach for the design of new fullerene derivatives to tune their intermolecular interactions to suppress self-aggregation within the ETL for high-performance PSCs.
RESUMO
Recently, metal halide perovskite light-emitting diodes (Pero-LEDs) have achieved significant improvement in device performance, especially for external quantum efficiency (EQE). And EQE is mostly determined by internal quantum efficiency of the emitting material, charge injection balancing factor (ηc), and light extraction efficiency (LEE) of the device. Herein, an ultrathin poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (UT-PEDOT:PSS) hole transporter layer is prepared by a water stripping method, and the UT-PEDOT:PSS can enhance ηc and LEE simultaneously in Pero-LEDs, mostly due to the improved carrier mobility, more matched energy level alignment, and reduced photon loss. More importantly, the performance enhancement from UT-PEDOT:PSS is quite universal and applicable in different kinds of Pero-LEDs. As a result, the EQEs of Pero-LEDs based on 3D, quasi-3D, and quasi-2D perovskites obtain enhancements of 42%, 87%, and 111%, and the corresponding maximum EQE reaches 17.6%, 15.0%, and 6.8%, respectively.