In Situ Collection and SERS Detection of Nitrite in Exhalations on Facemasks Based on Wettability Differences.

As one of the common carriers of biological information, along with human urine specimens and blood, exhaled breath condensate (EBC) carries reliable and rich information about the body's metabolism to track human physiological normal/abnormal states and environmental exposures. What is more, EBC has gained extensive attention because of the convenient and nondestructive sampling. Facemasks, which act as a physical filter barrier between human exhaled breath and inhaled substances from the external environment, are safe, noninvasive, and economic devices for direct sampling of human exhaled breath and inhaled substances. Inspired by the ability of fog collection of Namib desert beetle, a strategy for in situ collecting and detecting EBC with surface-enhanced Raman scattering is illustrated. Based on the intrinsic and unique wettability differences between the squares and the surrounding area of the pattern on facemasks, the hydrophilic squares can capture exhaled droplets and spontaneously enrich the analytes and silver nanocubes (AgNCs), resulting in good repeatability in situ detection. Using R6G as the probe molecule, the minimal detectable concentration can reach as low as 10-16 M, and the relative standard deviation is less than 7%. This proves that this strategy can achieve high detection sensitivity and high detection repeatability. Meanwhile, this strategy is applicable for portable nitrite analysis in EBC and may provide an inspiration for monitoring other biomarkers in EBC.

Study on synergistic hydrogen generation from aluminum-based composites in different forms of water.

The environmental suitability of hydrogen storage materials is significantly influenced by the way aluminum reacts synchronously with water, ice, and water steam. The straightforward ball milling process was used to synthesize Al-based composite materials with carbon nanotubes (CNTs) or graphene oxide (GO). The reactivity of the composites in various types of water was investigated. The Al/Bi/CNT and Al/Bi/GO composites may react in liquid water, low-temperature ice, and high-temperature steam. The hydrolysis promotion of Al-based composites by CNTs is superior to that of GO, whether in liquid water at 20 °C or ice at -20 °C. The maximum hydrogen generation rate of Al/Bi/CNT composites can reach 34.6 mL g-1 s-1 at 20 °C. The hydrogen generation volume of Al/Bi/CNT can reach 700 mL g-1 in 15 min on ice at -20 °C. Moreover, the ignition temperature and ignition delay time of Al/Bi/CNT are shorter than those of Al/Bi/GO in high-temperature steam. The hydrogen generation volume from Al/Bi/CNT at 200 °C can reach 853 mL g-1. These may originate from the unique one-dimensional nanostructure of CNTs, which provides more surface area or reaction sites during the hydrolysis of the composite.

In silico genome-wide analysis of homeodomain-leucine zipper transcription factors in Cannabis sativa L.

HD-Zip (Homeodomain-Leucine Zipper) is a family of transcription factors unique to higher plants and plays a vital role in plant growth and development. Increasing research results show that HD-Zip transcription factors are widely involved in many life processes in plants. However, the HD-Zip transcription factor for cannabis, a valuable crop, has not yet been identified. The sequence characteristics, chromosome localization, system evolution, conservative motif, gene structure, and gene expression of the HD-Zip transcription factor in the cannabis genome were systematically studied. Real-time quantitative polymerase chain reaction (qRT-PCR) was used to verify its function. The results showed that cannabis contained 33 HD-Zip gene members. The number of amino acids is 136-849aa, the isoelectric point is 4.54-9.04, and the molecular weight is 23264.32-93147.87Da. Many cis-acting elements are corresponding to hormone and abiotic stress in the HD-Zip family promoter area of cannabis. Sequencing of the transcriptome at 5 tissue sites of hemp, stems, leaves, bracts, and seeds showed similar levels of expression of 33 members of the HD-Zip gene family at 5 tissue sites. Bioinformatics results show that HD-Zip expression is tissue-specific and may be influenced by hormones and environmental factors. This lays a foundation for further research on the gene function of HD-Zip.

Environmental sustainability assessment of a new food waste anaerobic digestion and pyrolysis hybridization system.

This research conducted an environmental life cycle assessment (LCA) to evaluate an anaerobic digestion-co-pyrolysis (ADCo-Py) system in which pyrolysis was added to traditional food waste (FW) anaerobic digestion (AD) systems to treat the solid fraction and impurities separated from FW. The solid fraction, including impurities such as wooden chopsticks, plastics, eggshells, and bones, is usually incinerated, while pyrolysis can be a viable alternative to optimize FW treatment. The environmental impact of ADCo-Py was compared with stand-alone AD, pyrolysis, and ADCo-INC (AD with incineration of separated solids). The results indicated that both ADCo-Py (-1.726 kg CO2-Eq/kgFW) and ADCo-INC (-1.535 kg CO2-Eq/kgFW) outperform stand-alone AD (-0.855 kg CO2-Eq/kgFW) and pyrolysis (-0.181 kg CO2-Eq/kgFW) in mitigating global warming potential (GWP). Additionally, pretreatments were found to have the most significant influence on GWP, ecotoxicity potential (ETP), and acidification potential (AP). The two-step pretreatment in ADCo-Py, including the separation of solids and drying, significantly improved the environmental sustainability of the system when compared with standalone pyrolysis.

Effects of Fe3O4 NMs based Fenton-like reactions on biodegradable plastic bags in compost: New insight into plastisphere community succession, co-composting efficiency and free radical in situ aging theory.

Biodegradable plastic bags (BPBs), meant for eco-friendly, often inadequately degrade in compost, leading to microplastic pollution. In this study, the effect of Fenton-like reaction with Fe3O4 nanoparticles (NMs) on the plastisphere microorganisms' evolution and the BPBs' aging mechanism was revealed by co-composting of food waste with BPBs for 40 days. The establishment of the Fenton-like reaction was confirmed, with the addition of Fenton-like reagent treatments resulting in an increase of 57.67% and 37.75% in H2O2 levels during the composting, compared to the control group. Moreover, the structural characterization reveals that increasing oxygen content continuously generates reactive free radicals on the surface, leading to the formation of oxidative cavities. This process results in random chain-breaking, significantly reducing molecular weights by 39.27% and 38.81%, thus showcasing a deep-seated transformation in the plastic's molecular structure. Furthermore, the microbial network suggested that the Fenton-like reaction enriched plastisphere keystone species, thus accelerating the BPBs' aging. Additionally, the Fenton-like reaction improved compost maturity and reduced greenhouse gas emissions. These results reveal the bio-chemical mechanisms of BPBs aging and random chain-breaking by the Fenton-like reaction, under alternating oxidative/anoxic conditions of composting and provide a new insight to resolve the BPBs' pollutions.

Trollius chinensis Bunge: A Comprehensive Review of Research on Botany, Materia Medica, Ethnopharmacological Use, Phytochemistry, Pharmacology, and Quality Control.

Trollius chinensis Bunge, a perennial herb belonging to the Ranunculaceae family, has been extensively used in traditional Chinese medicine. Documented in the Supplements to the Compendium of Materia Medica, its medicinal properties encompass a spectrum of applications, including heat clearance, detoxification, alleviation of oral/throat sores, earaches, eye pain, cold-induced fever, and vision improvement. Furthermore, T. chinensis is used in clinical settings to treat upper respiratory infections, pharyngitis, tonsillitis, esoenteritis, canker, bronchitis, etc. It is mainly used to treat inflammation, such as inflammation of the upper respiratory tract and nasal mucosa. This comprehensive review explores the evolving scientific understanding of T. chinensis, covering facets of botany, materia medica, ethnopharmacological use, phytochemistry, pharmacology, and quality control. In particular, the chemical constituents and pharmacological research are reviewed. Polyphenols, mainly flavonoids and phenolic acids, are highly abundant among T. chinensis and are responsible for antiviral, antimicrobial, and antioxidant activities. The flower additionally harbors trace amounts of volatile oil, polysaccharides, and other bioactive compounds. The active ingredients of the flower have fewer side effects, and it is used in children because of its minimal side effects, which has great research potential. These findings validate the traditional uses of T. chinensis and lay the groundwork for further scientific exploration. The sources utilized in this study encompass Web of Science, Pubmed, CNKI site, classic monographs, Chinese Pharmacopoeia, Chinese Medicine Dictionary, and doctoral and master's theses.

Template-confined assembly of Ag nanocubes: An approach to fabricate SERS substrate with good performance.

Surface-enhanced Raman scattering (SERS) is an important analytical technique. Its detection sensitivity and reproducibility depend on the density and distribution of SERS hotspots. Self-assembly is an efficient method to produce of SERS substrates due to its easy accessibility. However, the assembled defects can hardly be avoided on large area, which could lower the density and uniformity of the hotspots, leading to poor SERS performance. Herein, we report a method to reduce the defects by taking a patterned substrate as template to confine the assembly of Ag nanocubes. The template was prepared based on the combination of photo lithography and self-assembly. Confined by the template, the Ag nanocubes were assembled closely in each dots of the pattern. The limit of detection (LOD) is down to 3.42 × 10-17 M and the enhanced factor (EF) is up to 3.44 × 1010 on the prepared substrate for detecting rhodamine 6G (R6G). In addition, the relative standard deviation (RSD) of the different substrates is 8.75 %. The assembled Ag nanocubes exhibits high sensitivity and reproducibility as SERS substrate, which are contributed by the formation of high-density and uniform hotspots. The prepared substrate can be used for detecting trace amounts of melamine in milk with LOD of 2.06 × 10-7 M and RSD of 6.91 %, so the substrate is applicable for analyzing various analytes.

Development and evaluation of a robotic system for lumbar puncture and epidural steroid injection.

Introduction: Lumbar puncture is an important medical procedure for various diagnostics and therapies, but it can be hazardous due to individual variances in subcutaneous soft tissue, especially in the elderly and obese. Our research describes a novel robot-assisted puncture system that automatically controls and maintains the probe at the target tissue layer through a process of tissue recognition. Methods: The system comprises a robotic system and a master computer. The robotic system is constructed based on a probe consisting of a pair of concentric electrodes. From the probe, impedance spectroscopy measures bio-impedance signals and transforms them into spectra that are communicated to the master computer. The master computer uses a Bayesian neural network to classify the bio-impedance spectra as corresponding to different soft tissues. By feeding the bio-impedance spectra of unknown tissues into the Bayesian neural network, we can determine their categories. Based on the recognition results, the master computer controls the motion of the robotic system. Results: The proposed system is demonstrated on a realistic phantom made of ex vivo tissues to simulate the spinal environment. The findings indicate that the technology has the potential to increase the precision and security of lumbar punctures and associated procedures. Discussion: In addition to lumbar puncture, the robotic system is suitable for related puncture operations such as discography, radiofrequency ablation, facet joint injection, and epidural steroid injection, as long as the required tissue recognition features are available. These operations can only be carried out once the puncture needle and additional instruments reach the target tissue layer, despite their ensuing processes being distinct.

Fabrication of Flexible Pyramid Array as SERS Substrate for Direct Sampling and Reproducible Detection.

Rapid extraction and analysis of target molecules from irregular surfaces are in high demand in the field of on-site analysis. Herein, a flexible platform used for surface-enhanced Raman scattering (SERS) based on an ordered polymer pyramid structure with half-imbedded silver nanoparticles (AgNPs) was prepared to address this issue. The fabrication includes the following steps: (1) creating inverted pyramid arrays in silicon substrate, (2) preparing a layer of AgNPs on the surface of the inverted pyramids, and (3) obtaining a substrate with an ordered polymer pyramids array with half-imbedded AgNPs by the molding method. This flexible substrate is capable of rapid extraction via a simple and convenient "paste and peel off" method. In addition, the substrate exhibits great repeatability and good sensitivity thanks to the uniformity and larger surface area of the ordered pyramids. The density of "hot spots" (local electromagnetic field with high intensity) is increased on the structured surface. Semi-imbedding silver particles in the polymer pyramids makes "hot spots" robust on the substrate. In addition, the preprepared silicon template with the inverted pyramids can be reused, which greatly reduces the production cost. With this substrate, we successfully analyzed thiram molecules on the epidermis of apples, cucumbers, and oranges, and the detection limits are 2.4, 3, and 3 ng/cm2, respectively. These results demonstrate the great potential of the substrate for in situ analysis, which can provide reference for the design of ideal SERS substrates.

Enhancing food waste reduction efficiency and high-value biomass production in Hermetia illucens rearing through bioaugmentation with gut bacterial agent.

The black soldier fly (BSF) rearing technology has been a promising bioconversion method for food waste (FW) disposal. However, when used independently, it currently only achieves low efficiency and biomass transformation rates (BTR). This study screened and identified two strains of gut beneficial bacteria, Bacillus cereus and Bacterium YC-LK-LKJ45. The efficiency of a complex culture formulated by these strains was investigated, focusing on enhancing FW reduction and high-value biomass production during the rearing of BSF larvae. The coculture agent group (G1-10%, with two strains in 1:1 volume ratio at a 10 % dosage) exhibited higher larval yield (627.67 g·kg-1), BTR (47.90 %), FW reduction efficiency (80.67 %), and total protein and fat yield (261.99 g·kg-1and 46.24 g·kg-1) compared to the control and the monoculture agent group (which added a single gut beneficial bacteria agent, either Bacillus cereus or Bacterium YC-LK-LKJ45). The bacterial agent altered the richness and diversity of the gut microbial community of BSF, increasing the relative abundance of beneficial bacteria such as Bacillus, Oceano bacillus, and Akkermansia, while decreasing pathogenic bacteria, such as Acinetobacter and Escherichia-Shigella. Structural equation model quantification revealed that α-diversity (λ = 0.897, p < 0.001) and BTR (λ = 0.747, p < 0.001) are crucial drivers for enhancing high-value biomass during bioaugmentation rearing. This investigation provides a theoretical framework for the effective management of food waste using BSF, enhancing its decomposition and transformation into higher-value biomass.

The complete chloroplast genome of Aegle marmelos and its phylogenetic analysis.

Aegle marmelos (L.) Correa 1800, a plant belonging to the Rutaceae family, is extensively used in Tibetan medicine. We employed Illumina HiSeq reads to assemble the complete chloroplast (cp) genome of A. marmelos, which spans 144,538 bp. The genome comprises 114 genes, including 75 protein-coding genes, 31 tRNA genes, and 8 rRNA genes. It is characterized by four regions: The large single-copy (LSC) region (74,253 bp), the inverted repeat A (IRa) region (26,015 bp), the small single-copy (SSC) region (18,255 bp), and the inverted repeat B (IRb) region (26,015 bp). Phylogenomic analysis demonstrated a close relationship between A. marmelos and Citrus. The assembly of The cp genome in this study serves as a foundation for conservation efforts and phylogenetic investigations of A. marmelos, paving the way for future experimentation.

Research hotspots and theme trends in post-traumatic growth: A co-word analysis based on keywords.

Objectives: To analyze and summarize the research hotspots and advancement of post-traumatic growth (PTG) over the past 15 years based on co-word analysis of keywords, and provide references for PTG-related research and clinical intervention. Methods: All studies related to PTG were retrieved from PubMed and Web of Science (WOS) from January 2013 to July 2022. A total of 11 Medical Subject Headings (MeSH) and keywords were used to identify qualified studies. Bibliographic Item Co-occurrence Matrix Builder (BICOMB; version 2.0) was used to conduct high-frequency keywords extraction and matrix setup, Graphical Clustering Toolkit (gCLUTO; version 1.0) was employed to perform clustering analysis, and SPSS (version 25.0) was used to carry out strategic diagram analysis. Results: A total of 2,370 publications were selected, from which 38 high-frequency keywords were extracted. The results revealed six research hotspots on PTG during the period from 2013 to 2022, including research on i) emotional reactions after negative life events, ii) PTG among cancer survivors, iii) rumination and resilience after trauma, iv) PTG among children and adolescents, v) role of social support and coping strategy in PTG, and vi) association between PTG and quality of life. Conclusions: This co-word analysis effectively reveals an overview of PTG over the past 15 years. The six research categories deduced from this study can reflect that the research content in the field of PTG is abundant, but some research topics have not yet been mature. The findings of this study are of great value to future investigations associated with PTG.

Electronic Modulation of the 3D Architectured Ni/Fe Oxyhydroxide Anchored N-Doped Carbon Aerogel with Much Improved OER Activity.

It remains a big challenge to develop non-precious metal catalysts for oxygen evolution reaction (OER) in energy storage and conversion systems. Herein, a facile and cost-effective strategy is employed to in situ prepare the Ni/Fe oxyhydroxide anchored on nitrogen-doped carbon aerogel (NiFeOx(OH)y@NCA) for OER electrocatalysis. The as-prepared electrocatalyst displays a typical aerogel porous structure composed of interconnected nanoparticles with a large BET specific surface area of 231.16 m2·g-1. In addition, the resulting NiFeOx(OH)y@NCA exhibits excellent OER performance with a low overpotential of 304 mV at 10 mA·cm-2, a small Tafel slope of 72 mV·dec-1, and excellent stability after 2000 CV cycles, which is superior to the commercial RuO2 catalyst. The much enhanced OER performance is mainly derived from the abundant active sites, the high electrical conductivity of the Ni/Fe oxyhydroxide, and the efficient electronic transfer of the NCA structure. Density functional theory (DFT) calculations reveal that the introduction of the NCA regulates the surface electronic structure of Ni/Fe oxyhydroxide and increases the binding energy of intermediates as indicated by the d-band center theory. This work provides a new method for the construction of advanced aerogel-based materials for energy conversion and storage.

Human thermal physiological response of wearing personal protective equipment: An educational building semi-open space experimental investigation.

With the outbreak and spread of the COVID-19 epidemic, HCWs are frequently required to wear personal protective equipment (PPE) for nucleic acid sample collection in semi-open transition spaces. Wearing PPE causes significant psychological and physical stress in HCWs. In this study, operative temperature (Top) and wet-bulb globe temperature (WBGT) were used to assess thermal conditions through field experiments, while multiple physiological parameters were measured in the subjects. The results indicated that the subjects showed statistically significant differences in thermal perception and physiological parameters with and without PPE. Using observed increases in heart rate (HR), auditory canal temperature (Tac), mean skin temperature (MST), and end-tidal CO2 pressure, subjects were shown to have an increased metabolic rate and heat storage while wearing PPE. Additionally, a decrease in oxygen concentration was also observed, and this decrease may be linked to fatigue and cognitive impairment. Moreover, HR, MST, and Tac showed a significant linear relationship, which increased with temperature and operative temperature, and the HR response was stronger with PPE than without PPE. The neutral, preferred, and acceptable temperatures were significantly lower with PPE than without PPE, and the deviations for neutral Top/WBGT were 9.5/7.1 °C and preferred Top/WBGT was 2.2/4.0 °C, respectively. Moreover, the upper limits of acceptable WBGT, 29.4 °C with PPE and 20.4 °C without PPE, differed significantly between the two phases. Furthermore, the recorded physiological parameter responses and thermal perception responses of the subjects while wearing PPE indicated that they were at risk of thermal stress. Overall, these results suggest that people who wear PPE should focus on their health and thermal stress. This study provides a reference for the development of strategies to counteract heat stress and improve thermal comfort.

Outcome and clinical features in juvenile myasthenia gravis: A systematic review and meta-analysis.

Background: Juvenile myasthenia gravis (JMG) is a rare autoimmune disease that has so far only been described in small cohort studies. We defined the clinical characteristics, management, and outcomes of JMG patients over the past 22 years. Methods: A search of PubMed, EMBASE, and web of science (1/2000-2/2022) identified all English language and human studies of JMG. The population was patients diagnosed with JMG. Outcomes included the history of myasthenic crisis, autoimmune comorbidity, mortality, and treatment outcome. Data extraction was performed by independent reviewers. And we performed a pooled reanalysis of all published data in the included studies and compared with other studies of adult cohorts. Results: We identified 11 articles describing 1,109 patients diagnosed between 2006 and 2021. JMG occurred in 60.4% of female patients. The mean age at presentation was 7.38 years old, and 60.6% of the patients had ocular symptoms as the first clinical manifestation. The most common initial presentation was ptosis, which occurred in 77.7% patients. AchR-Ab positive accounted for 78.7%. 641 patients received thymus examination, found to have thymic hyperplasia in 64.9% and thymoma in 2.2%. Autoimmune comorbidity was found in 13.6% and the most common one is thyroid disease (61.5%). First-line therapy, including pyridostigmine and steroids, was initiated in 97.8 and 68.6%, respectively. Six patients resolved spontaneously without treatment. Thymectomy was performed in 45.6%. 10.6% of patients had a history of myasthenic crisis. Completely stable remission was achieved in 23.7% and mortality was reported in 2 studies, which reported 8 deaths. Conclusion: JMG is a rare disease with a relatively benign course, and differs from adult MG in some clinical features. The treatment regimen guideline for children is still not well-established. There is a need for prospective studies to properly evaluate treatment regimes.

Genome-wide identification and expression profiling analysis of the trihelix gene family and response of PgGT1 under abiotic stresses in Platycodon grandiflorus.

The trihelix gene family plays an important role in plant growth and abiotic stress responses. Through the analysis of genomic and transcriptome data, 35 trihelix family members were identified for the first time in Platycodon grandiflorus; they were classified into five subfamilies: GT-1, GT-2, SH4, GTγ, and SIP1. The gene structure, conserved motifs and evolutionary relationships were analyzed. Prediction of physicochemical properties of the 35 trihelix proteins founded, the number of amino acid molecules is between 93 and 960, theoretical isoelectric point is between 4.24 and 9.94, molecular weight is between 9829.77 and 107435.38, 4 proteins among them were stable, and all GRAVY is negative. The full-length cDNA sequence of the PgGT1 gene of the GT-1 subfamily was cloned by PCR. It is a 1165 bp ORF encoding a 387 amino acid protein, with a molecular weight of 43.54 kDa. The predicted subcellular localization of the protein in the nucleus was experimentally verified. After being treated with NaCl, PEG6000, MeJA, ABA, IAA, SA, and ethephon, the expression of PgGT1 gene showed an up-regulated trend except for the roots treated with NaCl and ABA. This study laid a bioinformatics foundation for the research of trihelix gene family and the cultivation of excellent germplasm of P. grandiflorus.

Appraising co-composting efficiency of biodegradable plastic bags and food wastes: Assessment microplastics morphology, greenhouse gas emissions, and changes in microbial community.

Biodegradable plastic bags (BPBs) to collect food waste and microplastics (MPs) produced from their biodegradation have received considerable scientific attention recently. Therefore, the current study was carried out to assess the co-composting efficiency of biodegradable plastic bags (polylactic acid (PLA) + polybutylene terephthalate (PBAT) + ST20 and PLA + PBAT+MD25) and food waste. The variations in greenhouse gas (GHG) emissions, microbial community and compost fertility were likewise assessed. Compared with the control, PLA + PBAT+ST20 and PLA + PBAT+MD25 both accelerated organic matter degradation and increased temperature. Moreover, PLA + PBAT+ST20 aggravated CH4 and CO2 emissions by 12.10 % and 11.01 %, respectively. PLA + PBAT+MD25 decreased CH4 and CO2 emissions by 5.50 % and 9.12 %, respectively. Meanwhile, compared with PLA + PBAT+ST20, the combined effect of plasticizer and inorganic additive in PLA + PBAT+MD25, reduced the NO3--N contents, seed germination index (GI) and compost maturity. Furthermore, adding BPBs changed the richness and diversity of the bacterial community (Firmicutes, Proteobacteria and Bacteroidetes). Likewise, redundancy analysis (RDA) showed that the co-compost system of BPBs and food waste accelerated significantly bacterial community succession from Firmicutes and Bacteroidetes at the initial stage to Proteobacteria and Actinobacteria at the mature stage, increased co-compost temperature to over 64 °C and extended thermophilic composting phase, and promoted the degradation of MPs. Additionally, according to structural equation model quantification results, the inorganic additive of PLA + PBAT+MD25 had more serious toxicity to microorganisms and had significantly adverse effects on GI through CO2-C (λ = -0.415, p < 0.05) and NO3--N (λ = -0.558, p < 0.001), thus reduced compost fertility and quality. The results also indicated that the BPBs with ST20 as an additive could be more suitable for industrial composting than the BPBs with MD25 as an additive. This study provided a vital basis for understanding the potential environmental and human health risks of the MPs' generated by the degradation of BPBs in compost.

Ion-Selective Microporous Polymer Membranes with Hydrogen-Bond and Salt-Bridge Networks for Aqueous Organic Redox Flow Batteries.

Redox flow batteries (RFBs) have great potential for long-duration grid-scale energy storage. Ion-conducting membranes are a crucial component in RFBs, allowing charge-carrying ions to transport while preventing the cross-mixing of redox couples. Commercial Nafion membranes are widely used in RFBs, but their unsatisfactory ionic and molecular selectivity, as well as high costs, limit the performance and the widespread deployment of this technology. To extend the longevity and reduce the cost of RFB systems, inexpensive ion-selective membranes that concurrently deliver low ionic resistance and high selectivity toward redox-active species are highly desired. Here, high-performance RFB membranes are fabricated from blends of carboxylate- and amidoxime-functionalized polymers of intrinsic microporosity, which exploit the beneficial properties of both polymers. The enthalpy-driven formation of cohesive interchain interactions, including hydrogen bonds and salt bridges, facilitates the microscopic miscibility of the blends, while ionizable functional groups within the sub-nanometer pores allow optimization of membrane ion-transport functions. The resulting microporous membranes demonstrate fast cation conduction with low crossover of redox-active molecular species, enabling improved power ratings and reduced capacity fade in aqueous RFBs using anthraquinone and ferrocyanide as redox couples.

New insights of anaerobic performance, antibiotic resistance gene removal, microbial community structure: applying graphite-based materials in wet anaerobic digestion.

The addition of carbonaceous materials into anaerobic digestion (AD) has gained widespread attention due to their significant effects on anaerobic performance and antibiotic resistance gene (ARG) removal. This study selected graphite, graphene, and graphene oxide (GO) as additives to investigate variations in AD performance, ARG removal, microbial community diversity and structure in wet AD systems. The results indicated that the addition of graphite-based materials in wet AD systems could increase degradation of solid organic matters by 0.91%-3.41% and utilization of soluble organic fractions by 10.43%-13.67%, but could not stimulate methane production. After the addition of graphite and graphene, ARG removal rates were effectively increased to 90.85% and 94.22%, respectively. However, the total ARG removal rate was reduced to 77.46% with the addition of GO. In addition, the microbial diversity in the wet AD process was enhanced with the addition of GO only, graphite and graphene led to a reduction in it. As for bacterial community, graphite and graphene increased the abundance of Thermotogae from 43.43% to 57.42% and 58.74%, while GO increased the abundance of Firmicute from 49.90% to 56.27%. For the archaeal community, the proportion of hydrogenotrophic methanogens was improved when adding each graphite-based material; however, only GO increased Methanosaeta that was acetoclastic methanogens. Finally, methanogens were found as the ARG host, and ARGs that belong to the same subtype might exist in the same host bacteria.

In Silico Genome-Wide Analysis of B3 Transcription Factors in Cannabis sativa L.

Introduction: The B3 transcription factor has been identified in Arabidopsis thaliana, Oryza sativa, and Solanum lycopersicum, among other species. This family of transcription factors regulates seed growth, development, and stress. Cannabis is a valuable crop with numerous applications; however, no B3 transcription factors have been identified in this plant. Materials and Methods: The cannabis B3 gene family was identified and analyzed using bioinformatics analysis tools, such as the NCBI database, plantTFDB website, TBtools, and MEGA software. Quantitative real-time polymerase chain reaction (qRT-PCR) experiments were used to confirm its function. Results: The cannabis B3 family contains 65 members spread across 10 chromosomes. The isoelectric point ranged from 10.03 to 4.65, and the molecular weight ranged from 99,542.88 to 14,310.9 Da. Most of the members were found in the nucleus. The upstream promoter region of the gene contains a variety of cis-acting elements related to the stress response. RNA-seq data and qRT-PCR results showed that CsB3 genes were expressed differently in five organs of female Diku plants and in glandular hairs of nine distinct types of female cannabis inflorescences. Collinearity analysis revealed that there were more homologous genes between cannabis and dicotyledons than monocotyledonous plants, which was consistent with the evolutionary relationship. Conclusions: Hormones and external environmental factors might influence CsB3 expression. Furthermore, some genes such as CsB3-02, CsB3-07, CsB3-50, CsB3-62, and CsB3-65 may participate in cannabis growth and development and play a role in secondary metabolite synthesis. This study provides a solid foundation for further research into the gene function of the cannabis B3 family.