RESUMO
Black phosphorus (BP), a promising two-dimensional (2D) layered semiconductor material, has gained enormous attention due to its impressive properties over the past several years. Although plenty of methods have been developed to synthesize high-quality BP, most of the currently available BP materials still suffer from unsatisfactory crystallization, purity, and stability in air, hindering their practical application. A facile approach to synthesizing ultrahigh-quality single-crystal BP is of significance to shed light on the nature of 2D semiconductor materials and their massive application. In this work, we present the facile and efficient circulating vapor growth approach to growing bulk single-crystal BP. The as-grown BP material features high crystallinity and ultrahigh purity (higher than 99.999 at %), exceeding those of all the previously reported and some commercially available BP crystals. It also maintains excellent stability in air and water after 15 consecutive days of test. Moreover, the as-synthesized BP material features good thermal stability, oxidation resistance, and excellent electrical properties, as well. This study provides a new approach for the fabrication of ultrahigh-quality BP material and thus promotes its application.
RESUMO
As key performance indicators, the water absorption and mechanical strength of ceramics are highly associated with sintering temperature. Lower sintering temperatures, although favorable for energy saving in ceramics production, normally render the densification degree and water absorption of as-prepared ceramics to largely decline and increase, respectively. In the present work, 0.5 wt.% MnO2, serving as an additive, was mixed with aluminosilicate ceramics using mechanical stirring at room temperature, achieving a flexural strength of 58.36 MPa and water absorption of 0.05% and lowering the sintering temperature by 50 °C concurrently. On the basis of the results of TG-DSC, XRD, MIP, and XPS, etc., we speculate that the MnO2 additive promoted the elimination of water vapor in the ceramic bodies, effectively suppressing the generation of pores in the sintering process and facilitating the densification of ceramics at a lower temperature. This is probably because the MnO2 transformed into a liquid phase in the sintering process flows into the gap between grains, which removed the gas inside pores and filled the pores, suppressing the generation of pores and the abnormal growth of grains. This study demonstrated a facile and economical method to reduce the porosity and enhance the densification degree in the practical production of aluminosilicate ceramics.
RESUMO
Solar-powered photocatalytic conversion of CO2 to hydrocarbon fuels represents an emerging approach to solving the greenhouse effect. However, low charge separation efficiency, deficiency of surface catalytic active sites, and sluggish charge-transfer kinetics, together with the complicated reaction pathway, concurrently hinder the CO2 reduction. Herein, we show the rational construction of transition metal chalcogenides (TMCs) heterostructure CO2 reduction photosystems, wherein the TMC substrate is tightly integrated with amorphous oxygen-containing cobalt sulfide (CoSOH) by a solid non-conjugated polymer, i.e., poly(vinyl alcohol) (PVA), to customize the unidirectional charge-transfer pathway. In this well-defined multilayered nanoarchitecture, the PVA interim layer intercalated between TMCs and CoSOH acts as a hole-relaying mediator and meanwhile boosts CO2 adsorption capacity, while CoSOH functions as a terminal hole-collecting reservoir, stimulating the charge transport kinetics and boosting the charge separation over TMCs. This peculiar interface configuration and charge transport characteristics endow TMC/PVA/CoSOH heterostructures with significantly enhanced visible-light-driven photoactivity and CO2 conversion. Based on the intermediates probed during the photocatalytic CO2 reduction reaction, the photocatalytic mechanism was determined. Our work would inspire sparkling ideas to mediate the charge transfer over semiconductor for solar carbon neutral conversion.
RESUMO
Atomically precise alloy nanoclusters (NCs) inherit the advantages of homometal NC counterparts such as atomic stacking fashion, quantum confinement effect, and enriched catalytic active sites and simultaneously possess the advantageous physicochemical properties such as significantly enhanced photostability, ideal photosensitization efficiency, and favorable energy band structure. Nevertheless, elucidation of the roles of alloy NCs and alloy nanocrystals (NYs) in boosting solar water oxidation has so far not yet been reported owing to the deficiency of applicable alloy NC photosystems. Herein, utilizing the generic thermal-induced self-transformation of alloy NCs to alloy NYs, we comprehensively explore the photosensitization properties of glutathione (GSH)-capped alloy NCs (AgxAu1-x@GSH and CuxAu1-x@GSH) and the corresponding alloy NY (AgAu and CuAu) counterparts in solar water oxidation reaction. The results imply that photoelectrons of alloy NCs surpass the hot electrons over plasmonic alloy NYs in stimulating the PEC water oxidation reaction. The photoelectrons of alloy NCs demonstrate lower interfacial charge-transfer resistance, longer carrier lifetime, and a more enhanced photosensitization effect with respect to the plasmonic alloy NYs, contributing to the significantly boosted photoelectrochemical water oxidation activities. Moreover, we found that our result is universal.
RESUMO
The first, to our knowledge, successful laboratory implementation of an approach to image winds using simultaneous (as opposed to sequential) fringe imaging of suitable isolated spectral emission lines is described. Achieving this in practice has been a long-standing goal for wind imaging using airglow. It avoids the aliasing effects of source irradiance variations that are possible with sequential fringe sampling techniques. Simultaneous fringe imaging is accomplished using a field-widened Michelson interferometer by depositing phase steps on four quadrants of one of the mirrors and designing an optical system so that four images of the scene of interest, each at a different phase, are simultaneously produced. In this paper, the instrument characteristics, its characterization, and the analysis algorithms necessary for use of the technique for this type of interferometer are described for the first time, to the best of our knowledge. The large throughput associated with field-widened Michelson interferometers is sufficient for the spatial resolutions and temporal cadences necessary for ground based imaging of gravity waves in wind and irradiance to be achieved. The practical demonstration of this technique also validates its use for proposed monolithic satellite instruments for wind measurements using airglow on the Earth and Mars.
RESUMO
Both MXene and black phosphorus (BP), which actg as hot two-dimensional (2D) materials, have unique optical properties and important applications for nano-micro optical devices. Here, a composite MXene/BP-based metasurface, consisting of Ti3C2Tx and BP layers, is proposed for investigating the optical responses and electric field by using the finite-difference time-domain numerical simulation method in the microwave band. The research results show that the Fano resonance-like spectra can be observed when the coupling of surface plasmons (SPs) on the BP and MXene layers appears. Furthermore, the field enhancement, based on the Fano resonance-like optical responses, can be improved by an order of magnitude through adjusting the structural parameters and the polarization direction of incident light for the proposed metasurface. The findings may provide important theoretical insights into the design and realization of high-performance plasmonic devices.
RESUMO
Coronary artery disease (CAD) is a chronic disease but causes the highest mortality and morbidity among the cardiovascular diseases worldwide. Correlations between CAD and gut microbiota have been observed. This suggests that the gut microbiota could become a vital diagnostic marker of CAD, and restoring the gut habitat may become a promising strategy for CAD therapy. The elevated level of trimethylamine-N-oxide (TMAO), a gut microbiota-derived metabolite, was found to be associated with the increased risk of cardiovascular disease and the all-cause mortality. Preclinical studies have shown that it has pro-arteriosclerosis properties. It is likely that regulating the production of TMAO by gut microbiota may become a promising strategy for anti-atherosclerosis therapy. This review summarizes the clinical and preclinical researches on the intervention of CAD by regulating the gut microbiota and the microbiota-derived metabolite TMAO, with the aim to provide new target for the therapy of CAD.
Assuntos
Doença da Artéria Coronariana , Microbioma Gastrointestinal , Humanos , Metilaminas , ÓxidosRESUMO
To investigate the pollution characteristics and sources of atmospheric brown carbon (BrC) in Chongming Island, a background site of the Yangtze River Delta (YRD) region in China, PM2.5 samples collected from December 2018 to January 2019 were analyzed to determine their chemical compositions and optical properties. The results showed that the light absorption coefficient (Abs365,M) of BrC extracted by methanol at 365 nm was (5.39±3.33) M-1·m-1, which was 1.3 times of the water extracted BrC. Both increased significantly with the increase of pH values, suggesting that less acidic conditions can enhance the light absorption ability of BrC. In winter, both Abs365 and MAE365 (mass absorption efficiency) were higher in the nighttime than in the daytime. A strong linear correlation observed between Abs365 and levoglucosan (R2=0.72) indicated that many light absorbing substances in Chongming Island were derived from biomass burning emissions. During the campaign, nitro-aromatic compounds (NACs) and PAHs accounted for (1.5±1.1) ng·m-3 and (8.3±4.7) ng·m-3, respectively, contributing to 0.1% and 0.067% of the absorption of the total BrC at 365 nm, respectively. Positive matrix factorization (PMF) analysis further showed that biomass and fossil fuel combustions were the main sources of BrC in Chongming Island in winter, accounting for 56% of the total BrC, followed by secondary formation, accounting for 24% of the total BrC, with road dust contributing only 6%.