Microplastics as carbon-nutrient sources and shaper for microbial communities in stagnant water.

Microplastics (MPs) are emerging pollutants as vectors for microbial colonization, but their role as nutrients sources for microbial communities has rarely been reported. This study explored the impact of six types of MPs on assimilable organic carbon (AOC) and microbial communities over eight weeks. The following were the primary conclusions: (1) MPs contributed to AOC increment and subsequently increased bacterial regrowth potential. The maximum AOC reached 722.03 µg/L. The increase in AOC formation corresponded to AOC NOX, except in PVC samples where AOC P17 primarily increased. (2) The MPs accelerated bacterial growth and changed the bacterial distribution between the biofilm and water phases. A high MP surface-area-to-volume ratio or low MPs density contributed to bacterial accumulation and biofilm formation around the plastisphere, thereby decreasing the relative microbial proportion in the water phase. (3) High-throughput sequencing and scanning electron microscope revealed that different MPs shaped various microbial communities temporally and spatially. (4) Biofilm formatting and formatted models were established and simulated to explain the kinetic interaction between the AOC and bacteria inhabiting the plastisphere. Finally, the challenges that plastic-deprived AOC represent in terms of anti-bacterial measures and chemical safety are discussed.

Producing and storing self-sustaining drinking water from rainwater for emergency response on isolated island.

Drinking water on isolated islands includes treated rainwater, water shipped from the mainland, and desalinated seawater. However, marine transportation and desalination plants are vulnerable to emergencies, such as extreme weather, making self-sustaining stand-by water for emergency response essential. Rainwater is ideal for producing the stand-by water, and rainwater harvesting is sustainable and clean, and prolonged biostability can be ensured by managing biological and chemical parameters. The present study applied a stand-by drinking water purification system (primarily including nanofiltration and low-dose chlorination) to explore the feasibility of producing and storing cleaner drinking water from rainwater and the following conclusions were drawn. First, treatment of rainwaters ensures biosafety for seven days, which is longer than that for untreated rainwater; the proportion of opportunistic pathogens decreased from 23.40-7.77% after nanofiltration, and it was proposed that the microbial community converges after advanced water treatment. Second, chemical qualities were improved. Local resource coral sand prevents pH in rainwater from decreasing below 6.5, and treated rainwater had lower disinfection by-product potential and higher disinfection efficiency, allowing periodical rainwater recycling. Third, harvesting rainwater was extremely cost-effective, with an operation cost of 1.5-2.5 RMB/m3. From biosafety, chemical safety, and economic cost perspectives, self-sustaining water from rainwater can contributes to the development of sustainable and cost-effective water supply systems on isolated islands. Mixing treated rainwater and desalinated seawater reasonably guarantees sufficiency and safety.

Microbial contamination in distributed drinking water purifiers induced by water stagnation.

Small-scale distributed water purifiers (SSDWPs), providing better quality drinking water, are popularly used both in homes and in the public domain. Non-continuous operation leads to water stagnation and ultimately induces microbial contamination. However, information related to such contamination in these purifiers is reported scarcely. In the present study, an SSDWP, consisting of sand filtration (SF), granular activated carbon (GAC), and ultrafiltration (UF) processes, was established to explore microbial changes induced by water stagnation, based on the aspects of bacterial count, microbial size, microbiome and pathogenic communities. Our results primary showed that: first, compared with drinking water distribution system (DWDS), bacterial counts increased more rapidly in SSDWPs, growing to > 500 cfu/mL after 2.5 h stagnation. The proportion of intact cells also increased with stagnation time. Conversely, microbial size decreased with stagnation time according to changes in forward scatter detected using flow cytometry. Second, microbiome evolution followed the isolated island model, while in stagnated DWDS, microbiome evolved according to the continent island model, and the former had higher abundance of biodiversity. Furthermore, stagnation evidently caused microbiome changes in each unit, and spatial differences contributed to microbiome dissimilarity more significantly than temporal differences. Third, Mycobacterium was the dominant pathogenic genus in the SF and GAC units while Acinetobacter was the most abundant in the UF unit. Pathogenic risks increased with water stagnation time and lower nutrients level contributed to pathogenic community richness. Therefore, terminal disinfection of SSDWPs is strongly advised.

The effect of hydraulic retention time on ammonia and nitrate bio-removal over nitrite process.

Ammonia and Nitrate Bio-removal Over Nitrite (ANBON) is a new biological process, which couples denitratation with Anaerobic Ammonium Oxidation (ANAMMOX) to carry out simultaneous removal of nitrate nitrogen and ammonia nitrogen. The effect of hydraulic retention time (HRT) on the performance of ANBON process was investigated. The results showed that the optimal HRT was about 0.7 h and the nitrogen removal rate was 26.2 ± 0.7 g N·L-1·d-1, which was at top level reported in previous literatures. The change of HRT was found to trigger the change of microbial community in the reactor, which exerted a great effect on the performance of ANBON process. The community analysis based on 16S rRNA gene indicated that Halomonas and Candidatus Kuenenia were the dominant functional bacteria in the denitratation unit and the ANAMMOX unit respectively. These results are helpful for the development and application of ANBON process.

Coupling changes of disinfectant and bacteria induced by the water stagnation and disinfection strategy.

This paper studied stagnation-induced changes of disinfectant and bacteria using an orthogonal test and kinetic analysis, and then proposed a disinfection strategy. Tap water from a drinking water distribution system and ultrafiltrated water were collected and disinfected with four disinfectants (concentrations were set 0.2-1 mg/L as Cl2. The study had several findings. First, disinfectants expanded lag phases and shortened generation times of the microbiome. Reduction in culturability, substrate responsiveness, respiratory activity, membrane potential and integrity subsequently occurred with increasing disinfection concentration. Second, the disinfectant decay rate decreased with initial disinfection concentration, and the effective disinfection phase (heterotrophic plate count (HPC) was less than 100 cfu/mL) was longer in water samples with lower organic matter. Moreover, the disinfection process was divided into an effective phase and an invalid phase (HPC>100 cfu/mL). Then a disinfection efficiency model was built and the regulation of disinfection by-products (DBPs) production was studied in chlorinated water samples, which provides a general method for other disinfectant studies. The average trihalomethanes (THMs) production during the effective phase (marked as THM/th) and THMs production during the invalid phase (marked as ΔTHM) were proposed to evaluate the DBPs production. The level of THM/th and ΔTHM were lower in ultrafiltrated water than those in tap water. THM/th were negatively correlated with initial chlorine concentration while ΔTHM were positively correlated with initial chlorine concentration. Finally, for the purpose of raising disinfection efficiency and decreasing DBPs, we propose periodic pulse disinfection.

Heterotrophic Ammonia and Nitrate Bio-removal Over Nitrite (Hanbon): Performance and microflora.

A novel Heterotrophic Ammonia and Nitrate Bio-removal Over Nitrite (Hanbon) process, combining Short Nitrate Reduction (SNR) with Anaerobic Ammonia Oxidation (Anammox), was developed in a lab-scale continuous up-flow reactor. The substrate effects were investigated to characterize the performance of Hanbon process, and the corresponding microflora information was also revealed. Our results showed that the optimal substrate ratio of NH4+-N:NO3--N:COD for the Hanbon process was 0.65:1:2.2. The volumetric nitrogen removal rate was up to 9.0 ± 0.1 kgN·m-3·d-1 at high influent substrate concentrations of NH4+-N 375 mg L-1, NO3--N 750 mg L-1 and COD 1875 mg L-1, which was superior to the reported values of analogous processes. Moreover, the effluent total nitrogen concentration was able to meet the strict discharge standard (less than 10 mg L-1) at low influent substrate concentration of NH4+-N 26 mg L-1, NO3--N 40 mg·L-1and COD 88 mg L-1. Illumina-based 16S rRNA gene sequencing results showed that Halomonas campisalis and Candidatus Kuenenia stuttgartiensis were the dominant bacteria in the SNR section and Anammox section at high substrate concentration condition. However, Halomonas campaniensis and Candidatus Brocadia brasiliensis were raised significantly at low substrate concentration condition. Hanbon process provided in the present work was flexible of treating wastewater with various nitrogen concentrations, deserving further development.