RESUMO
Three-micrometer mid-infrared (MIR) femtosecond pulse sources with a high repetition rate (HRR) have potential applications in a number of fields such as biological imaging, optical frequency combs, and gas detection. In this paper, by optimizing the fiber length and the cavity structure, we demonstrated a highly stable, self-starting mode-locked fluoride fiber laser (MLFFL) with a fundamental repetition rate of â¼165â MHz and a signal-to-noise ratio (SNR) of 90â dB. As far as we know, this stands as the highest fundamental repetition rate ever acquired directly from an ultrafast MLFFL in the >2.5â µm MIR region. Stable 352-fs pulses at 2795â nm with an average output power of 392â mW and a low integrated relative intensity noise (RIN) of 0.018% [10â Hz, 10â MHz] were generated. The root mean square (RMS) power fluctuation is 0.17% over 2â h, which indicates excellent oscillator stability. This high-performance laser offers a practicable scheme both for scaling the repetition frequency in MIR MLFFLs and high-precision ultrafast applications at longer wavelengths.
RESUMO
We present a nonlinear amplifying loop mirror-based mode-locked fiber laser. By adjusting the pump power, the proposed laser exhibits a dissipative soliton resonance (DSR)-like pulse operation with a maximum pulse width of 150â ns. Subsequently, a three-stage Tm3+-doped fiber amplifier is implemented using a single-mode double-cladding Tm3+-doped fiber to increase the DSR-like pulse output power to 52.5 W, achieving a pump slope efficiency of 47.1% in the main amplifier. A 25 m first-order Raman-gain fiber (UHNA7) is pumped by a DSR-like pulse, and 16.3 W of pure 2.135â µm first-order Raman light with a spectral purity of 73.4% is obtained. Finally, 5.4 W of 2.35â µm second-order Raman light with a spectral purity of 66% is obtained using a 10 m 98% germania-core fiber as a second-order Raman-gain fiber cascaded after UHNA7 fiber. To the best of our knowledge, this is the highest output power ever obtained from a 2.3â µm laser.
RESUMO
We report a tunable spatiotemporally mode-locked large-mode-area Er:ZBLAN fiber laser based on the nonlinear polarization rotation technique. A diffraction grating is introduced to select the operating wavelength. Under the spectral and spatial filtering effects provided by the grating and spatial coupling respectively, stable ps-level spatiotemporally mode-locked pulses around 2.8â µm with a repetition rate of 43.4â MHz are generated. Through a careful adjustment of the grating, a broad wavelength tuning range from 2747 to 2797â nm is realized. To the best of our knowledge, this is the first wavelength-tunable spatiotemporally mode-locked fiber laser in the mid-infrared region.
RESUMO
We experimentally investigate the generation of h-shaped pulse in an all-polarization-maintaining (PM) and all-normal-dispersion (ANDi) mode-locked fiber laser. The generated pulse is demonstrated to be a unitary pulse, instead of a noise-like pulse (NLP). Furthermore, by employing an external filtering system, the obtained h-shaped pulse can be resolved into rectangular-shaped pulses, chair-like pulses, and Gaussian pulses. The authentic AC traces with a double-scale structure of unitary h-shaped pulses and chair-like pulses are observed on the autocorrelator. The chirp of h-shaped pulses is also proved similar to that of DSR pulses. To the best of our knowledge, this is the first time that the existence of unitary h-shaped pulse generation has been confirmed. Moreover, our experimental results reveal the close relationship of formation mechanisms of dissipative soliton resonance (DSR) pulses, h-shaped pulses, and chair-like pulses, which helps to unify the essences of such "DSR-like" pulses.
RESUMO
An all-polarization-maintaining (PM) mode-locked fiber laser based upon nonlinear polarization evolution (NPE) that operates around 976â nm is presented. The NPE-based mode-locking is realized using a special section of the laser which comprises three pieces of PM fibers with specific deviation angles between the polarization axes and a polarization-dependent isolator. By optimizing the NPE section and adjusting the pump power, dissipative soliton (DS) pulses with a pulse duration of â¼6 ps, a spectral bandwidth of >10â nm and a maximum pulse energy of 0.54 nJ are generated. Self-starting, steady mode-locking operation is achievable within a pump power range of â¼2 W. Moreover, by incorporating a segment of passive fiber into the appropriate location in the laser resonator, an intermediate regime between stable single-pulse mode-locking and noise-like pulse (NLP) is realized in the laser. Our work expands the dimension of the research on the mode-locked Yb-doped fiber laser operating around 976â nm.
RESUMO
We report an all-fiber 2.8-µm ultra-short pulse master oscillator power amplifier (MOPA) system seeded by a soliton self-frequency shift from a mode-locked thulium-doped fiber laser. This all-fiber laser source delivers 2.8-µm pulses with an average power of 3.42 W, a pulse width of 115 fs, and a pulse energy of 45.4 nJ. We demonstrate, to the best of our knowledge, the first femtosecond watt-level all-fiber 2.8-µm laser system. A 2.8-µm pulse seed was obtained via the soliton self-frequency shift of 2-µm ultra-short pulses in a cascaded silica and passive fluoride fiber. A novel, to the best of our knowledge, high-efficiency and compact home-made end-pump silica-fluoride fiber combiner was fabricated and used in this MOPA system. Nonlinear amplification of the 2.8-µm pulse was realized, and soliton self-compression was observed accompanied by spectral broadening.
RESUMO
We report a hybrid mode-locked fiber laser at 2.8â µm based on a large-mode-area Er:ZBLAN fiber. Reliable self-starting mode-locking is achieved via the combination of nonlinear polarization rotation and a semiconductor saturable absorber. Stable mode-locked pulses with a pulse energy of 9.4 nJ and a pulse duration of 325 fs are generated. To the best of our knowledge, this is the highest pulse energy directly generated from a femtosecond mode-locked fluoride fiber laser (MLFFL) to date. The measured M2 factors are below 1.13, indicating a nearly diffraction-limited beam quality. Demonstration of this laser provides a feasible scheme for the pulse energy scaling of mid-infrared MLFFLs. Moreover, a peculiar multi-soliton mode-locking state is also observed, in which the time interval between the solitons varies irregularly from tens of picoseconds to several nanoseconds.
RESUMO
By combining nonlinear polarization rotation (NPR) and semiconductor saturable absorber, we report a hybrid mode-locked Er:ZBLAN fiber oscillator at 2.8â µm. Stable 325-fs mode-locked pulses with an average power of 131â mW and a record signal-to-noise ratio of 79â dB at the fundamental frequency of 55.4â MHz are generated. Numerical simulations are carried out based on the modified coupled nonlinear Schrödinger equations, and offer new insights into the underlying dynamics of pulse generation. The simulations indicate that compared with Er:ZBLAN fiber lasers mode-locked by NPR alone, the hybrid mode-locked Er:ZBLAN fiber oscillator allows a wider range and a lower threshold of the pump power while maintaining the ultrashort pulse width. Moreover, we numerically demonstrate that the hybrid mode-locked oscillator is less sensitive to the variation of polarization states, which will increase its robustness against environmental disturbance. This is the first time that the hybrid mode-locking technique is applied in the mid-infrared, opening up new opportunities for the development of stable ultrafast mid-infrared laser sources and practical applications outside the laboratory.
RESUMO
We demonstrate the generation of soliton and dissipative soliton in an ultrafast thulium (Tm) doped fiber laser based upon cross-phase modulation (XPM) induced mode-locking. The mode-locking is realized by periodically modulating the 2-µm signal through XPM that is activated by an injected 1.5-µm pulsed laser. Such a mechanism enables the laser to be mode-locked in various operation regimes without any real or artificial saturable absorbers. Thanks to the XPM pulling effect, the wavelength of the Tm-doped fiber laser can be tuned by adjusting the repetition frequency of the 1.5-µm pulsed laser. The maximum tuning ranges achieved in this work for the soliton and dissipative soliton regimes are respectively 11 nm and 15 nm. The outcomes of this work not only provide a continuously and controllably wavelength-tunable ultrafast laser but also offer a passively synchronized dual-color fiber laser system, which is promised for many important applications such as Raman spectroscopy, nonlinear frequency conversion systems, and multi-color pump-probe systems.
RESUMO
We report a high-average-power mid-infrared ultrafast laser system consisting of a fluoride fiber mode-locked oscillator and a nonlinear amplifier. A backward pumping scheme was used in the amplifier to simultaneously realize pulse amplification and self-compression. The input signal polarization was demonstrated to play an important role in the self-compression process. Through the optimization of input polarization, a 4.13 W average-power 59 fs pulse at 2.8 µm was achieved, with an estimated pulse energy of 42.2 nJ and a peak power of 715â kW. To the best of our knowledge, this is the highest average-power pulse with sub-100-fs duration generated from a mid-infrared fiber laser system to date.
RESUMO
The generation of square-wave pulses in a 1/1.5-µm dual-band mode-locked fiber laser is experimentally demonstrated. The laser is based upon a peculiar "figure-θ" architecture that exploits a single active fiber to realize dual-band operation. High-energy square-wave pulses are simultaneously generated in both the 1-µm and the 1.5-µm spectral band using the laser. The 1-µm pulse maintains wave-breaking-free operation during the increase of the pump power and finally achieves energy as high as 88.6 nJ, while the 1.5-µm pulse achieves energy up to 1.5 µJ before it ultimately collapses into second-order mode locking. To the best of our knowledge, this is the first report on the formation of square-wave pulses in dual-band mode-locked fiber lasers.
RESUMO
The welding of glasses is widely used in many fields, such as optics, microfluidics, and microelectromechanical systems. In this paper, two pieces of 1 mm soda lime glass substrates were welded using a 1064 nm nanosecond laser assisted with a 14 nm titanium-coated thin film coating. Results show that after the laser irradiation, the welded area becomes highly transparent much like uncoated glass. The maximum change rate of transmittance of the welded zone is 8.88% in the wavelength range of 400-1800 nm, compared to a piece of 2 mm glass substrate. The chemical reaction process between the titanium film and the glass substrate of the highly transparent welded sample was analyzed by x-ray photoelectron spectroscopy. Welded quality and shear strength were characterized by scanning acoustic microscopy and shear tests.
RESUMO
A passively mode-locked thulium-doped fiber laser using a tungsten ditelluride saturable absorber (${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA) is demonstrated. High-power mode-locked pulses with an average output power of 108.1 mW were achieved by incorporating the ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA into a thulium-doped fiber oscillator. To the best of our knowledge, this is the highest average power obtained from a ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA-based fiber laser. We further amplified the output power to 5.60 W with an all-fiber thulium-doped double-cladding fiber amplifier. Our result indicates that ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA could be an excellent candidate for a high-power fiber laser system.
RESUMO
Herein, we present a fundamental and harmonic mode-locked figure-of-9 thulium-doped fiber laser using a nonlinear amplifying loop mirror. The generated fundamental mode-locked h-shaped pulse is centered at 1889â nm with an average output power reaching 282â mW and a pulse energy up to 1.23 µJ, which is the highest power and pulse energy of an h-shaped pulse. In the harmonic mode-locked regime, up to the 8th harmonic h-shaped pulse is obtained. The detailed characteristics of the h-shaped pulse are discussed. The proposed study shows that the figure-of-9 fiber laser can generate h-shaped pulses and also allows the generation of nanosecond pulses with a µJ-level pulse energy.