The Dutch Multidisciplinary Occupational Health Guideline to Enhance Work Participation Among Low Back Pain and Lumbosacral Radicular Syndrome Patients.

Purpose Based on current scientific evidence and best practice, the first Dutch multidisciplinary practice guideline for occupational health professionals was developed to stimulate prevention and enhance work participation in patients with low back pain (LBP) and lumbosacral radicular syndrome (LRS). Methods A multidisciplinary working group with health care professionals, a patient representative and researchers developed the recommendations after systematic review of evidence about (1) Risk factors, (2) Prevention, (3) Prognostic factors and (4) Interventions. Certainty of the evidence was rated with GRADE and the Evidence to Decision (EtD) framework was used to formulate recommendations. High or moderate certainty resulted in a recommendation "to advise", low to very low in a recommendation "to consider", unless other factors in the framework decided differently. Results An inventory of risk factors should be considered and an assessment of prognostic factors is advised. For prevention, physical exercises and education are advised, besides application of the evidence-based practical guidelines "lifting" and "whole body vibration". The stepped-care approach to enhance work participation starts with the advice to stay active, facilitated by informing the worker, reducing workload, an action plan and a time-contingent increase of work participation for a defined amount of hours and tasks. If work participation has not improved within 6 weeks, additional treatments should be considered based on the present risk and prognostic factors: (1) physiotherapy or exercise therapy; (2) an intensive workplace-oriented program; or (3) cognitive behavioural therapy. After 12 weeks, multi-disciplinary (occupational) rehabilitation therapy need to be considered. Conclusions Based on systematic reviews and expert consensus, the good practice recommendations in this guideline focus on enhancing work participation among workers with LBP and LRS using a stepped-care approach to complement existing guidelines focusing on recovery and daily functioning.

Accuracy of a computer-assisted planning and placement system for anatomical femoral tunnel positioning in anterior cruciate ligament reconstruction.

BACKGROUND: Femoral tunnel positioning is a difficult, but important factor in successful anterior cruciate ligament (ACL) reconstruction. Computer navigation can improve the anatomical planning procedure besides the tunnel placement procedure. METHODS: The accuracy of the computer-assisted femoral tunnel positioning method for anatomical double bundle ACL-reconstruction with a three-dimensional template was determined with respect to both aspects for AM and PL bundles in 12 cadaveric knees. RESULTS: The accuracy of the total tunnel positioning procedure was 2.7 mm (AM) and 3.2 mm (PL). These values consisted of the accuracies for planning (AM:2.9 mm; PL:3.2 mm) and for placement (about 0.4 mm). The template showed a systematic bias for the PL-position. CONCLUSIONS: The computer-assisted templating method showed high accuracy for tunnel placement and has promising capacity for application in anatomical tunnel planning. Improvement of the template will result in an accurate and robust navigation system for femoral tunnel positioning in ACL-reconstruction.

Stable fixation of the IBP humeral component implanted without cement in total elbow replacement: a radiostereometric analysis study of 16 elbows at two-year follow-up.

We determined the short-term clinical outcome and migration within the bone of the humeral cementless component of the Instrumented Bone Preserving (IBP) total elbow replacement in a series of 16 patients. There were four men and 12 women with a mean age at operation of 63 years (40 to 81). Migration was calculated using radiostereometric analysis. There were no intra-operative complications and no revisions. At two-year follow-up, all patients showed a significant reduction in pain and functional improvement of the elbow (both p < 0.001). Although ten components (63%) showed movement or micromovement during the first six weeks, 14 (88%) were stable at one year post-operatively. Translation was primarily found in the proximal direction (median 0.3 mm (interquartile range (IQR) -0.09 to 0.8); the major rotational movement was an anterior tilt (median 0.7° (IQR 0.4° to 1.6°)). One malaligned component continued to migrate during the second year, and one component could not be followed beyond three months because migration had caused the markers to break off the prosthesis. This study shows promising early results for the cementless humeral component of the IBP total elbow replacement. All patients had a good clinical outcome, and most components stabilised within six months of the operation.

Computer-assisted anatomically placed double-bundle ACL reconstruction: an in vitro experiment with different tension angles for the AM and the PL graft.

Anterior cruciate ligament reconstruction techniques are evolving with innovations like double-bundle (DB) grafts and computer assistance. The current DB techniques do not appear to make the clinical difference yet. Insight in various techniques may lead to better results. In this study, the anterior laxity of a DB reconstruction with an anteromedial (AM) graft fixated in 90° of flexion and a posterolateral (PL) graft fixated in 20° and computer-assisted anatomically placed femoral attachments was compared to normal values and single-bundle grafts. In 8 fresh-frozen human cadaveric knees, the anterior laxity was tested from 0° to 90° flexion, with a 100 Newton (N) anterior tibial load in joints with (1) intact ACL, (2) torn ACL, (3) single-bundle (SB) graft tensed with 15 N in 20°, (4) anatomic AM graft tensed with 15 N in 90°, (5) anatomic PL graft tensed with 15 N in 20°, and (6) anatomic DB graft (4+5). All reconstructions caused a posterior position of the tibia. Relative to the normal anterior laxity, the single-bundle techniques showed significantly increased laxities: The SB technique in 0° (+1.1 mm) and 15° (+1.7 mm); The AM reconstructions in 45° (+1.6 mm) and 90° (+1.5 mm); The PL reconstructions in all angles (from +1.4 to +2.3 mm), except in 0°. The anatomic DB technique showed no significantly increased laxities and restored normal laxity in all angles.

Development of a femoral template for computer-assisted tunnel placement in anatomical double-bundle ACL reconstruction.

Femoral graft placement is an important factor in the success of anterior cruciate ligament (ACL) reconstruction. In addition to improving the accuracy of femoral tunnel placement, Computer Assisted Surgery (CAS) can be used to determine the anatomic location. This is achieved by using a 3D femoral template which indicates the position of the anatomical ACL center based on endoscopically measurable landmarks. This study describes the development and application of this method. The template is generated through statistical shape analysis of the ACL insertion, with respect to the anteromedial (AM) and posterolateral (PL) bundles. The ligament insertion data, together with the osteocartilage edge on the lateral notch, were mapped onto a cylinder fitted to the intercondylar notch surface (n = 33). Anatomic variation, in terms of standard variation of the positions of the ligament centers in the template, was within 2.2 mm. The resulting template was programmed in a computer-assisted navigation system for ACL replacement and its accuracy and precision were determined on 31 femora. It was found that with the navigation system the AM and PL tunnels could be positioned with an accuracy of 2.5 mm relative to the anatomic insertion centers; the precision was 2.4 mm. This system consists of a template that can easily be implemented in 3D computer navigation software. Requiring no preoperative images and planning, the system provides adequate accuracy and precision to position the entrance of the femoral tunnels for anatomical single- or double-bundle ACL reconstruction.

Fixation stability of opening- versus closing-wedge high tibial osteotomy: a randomised clinical trial using radiostereometry.

Valgus high tibial osteotomy for osteoarthritis of the medial compartment of the knee can be performed using medial opening- and lateral closing-wedge techniques. The latter have been thought to offer greater initial stability. We measured and compared the stability of opening- and closing-wedge osteotomies fixed by TomoFix plates using radiostereometry in a series of 42 patients in a prospective, randomised clinical trial. There were no differences between the opening- and closing-wedge groups in the time to regain knee function and full weight-bearing. Pain and knee function were significantly improved in both groups without any differences between them. All the osteotomies united within one year. Radiostereometry showed no clinically relevant movement of bone or differences between either group. Medial opening-wedge high tibial osteotomy secured by a TomoFix plate offers equal stability to a lateral closing-wedge technique. Both give excellent initial stability and provide significantly improved knee function and reduction in pain, although the opening-wedge technique was more likely to produce the intended correction.

Failure of the uncoated titanium ProxiLock femoral hip prosthesis.

UNLABELLED: New prostheses should be evaluated for stability and clinical performance. In a prospective randomized clinical trial, we implanted 22 titanium (Ti) and 20 hydroxyapatite-coated (HA) ProxiLock femoral hip prostheses during total hip arthroplasty in 42 patients. The patients were followed for 24 months with clinical, radiographic and radiostereometric analysis. Full weightbearing was allowed immediately postoperatively. One patient with a titanium stem was lost to followup. During the first two months, 34 of the 41 stems subsided and/or rotated towards retroversion, regardless of stem type. At the 24-month followup 35 of the 41 prostheses were either fully stabilized (16 HA and 11 Ti stems) or had clinical irrelevant migration (four HA and four Ti stems). Six Ti prostheses showed continuous migrations with maximums of 4.7 mm translation and 12.2 degrees retroversion; four of these were revised, the other two had no clinical complaints. CLINICAL RELEVANCE: The migration pattern we found indicates insufficient primary fixation of the ProxiLock stem in an immediate full weightbearing protocol. The HA coating improves the secondary stability of the prosthesis compared to the uncoated stem. Early migration is associated with an increased risk of possible future loosening and revision, and therefore we discontinued the use of this prosthesis. LEVEL OF EVIDENCE: Therapeutic Level I. See Guidelines for Authors for a complete description of levels of evidence.