RESUMO
The metastasis of cancer cells is a principal cause of morbidity and mortality in cancer. The combination of a cytosensor and photothermal therapy (PTT) cannot completely eliminate cancer cells at one time. Hence, this study aimed to design a localized surface plasmonic resonance (LSPR)-based aptasensor for a circuit of cytosensing-PTT (COCP). This was achieved by coating a novel sandwich layer of polydopamine/gold nanoparticles/polydopamine (PDA/AuNPs/PDA) around the Ω-shaped fiber-optic (Ω-FO). The short-wavelength peak of the sandwich layer with strong resonance exhibited a high refractive index sensitivity (RIS). The modification with the T-shaped aptamer endowed FO-LSPR with unique characteristics of time-dependent sensitivity enhancement behavior for a sensitive cytosensor with the lowest limit of detection (LOD) of 13 cells/mL. The long-wavelength resonance peak in the sandwich layer appears in the near-infrared region. Hence, the rate of increased localized temperature of FO-LSPR was 160 and 30-fold higher than that of the bare and PDA-coated FO, indicating strong photothermal conversion efficiency. After considering the localized temperature distribution around the FO under the flow environment, the FO-LSPR-enabled aptasensor killed 77.6% of cancer cells in simulated blood circulation after five cycles of COCP. The FO-LSPR-enabled aptasensor improved the efficiency of the cytosensor and PTT to effectively kill cancer cells, showing significant potential for application in inhibiting cancer metastasis.
RESUMO
Circulating tumor cell (CTC) in the blood is the main cause of cancer metastasis for death in cancer patients. It is extremely important for cancer diagnosis at an early stage and treatment to simultaneously detect and kill the CTCs. In this work, a new hybridized nanolayer, namely gold nanoparticle/gold nanorods@ Polydopamine (AuNPs/AuNRs@PDA), was coated on the Ω-shaped fiber optics (Ω-FO) for localized surface plasmonic resonance (LSPR) to perform tumor cell sensing and photothermal treatment (PTT). The PDA nanolayer was formed on a bare fiber optic through the self-polymerization of dopamine under mild conditions. The AuNRs and AuNPs were absorbed on the surface of the PDA nanolayer to form a hybridized nanolayer. The hybridized nanolayer-modified Ω-FO LSPR exhibited a high refractive index sensitivity (RIS) of 37.59 (a.u/RIU) and photothermal conversion efficiency. After being modified with the recognition element of aptamer, the Ω-FO LSPR was used to develop a sensitive and specifical tumor cell sensing. Under the irradiation of near-infrared light (NIR) laser, the Ω-FO LSPR can kill the captured tumor cells with the apoptotic/necrotic rate of 62.6 % and low side-effect for the nontarget cells. The FO LSPR sensor realized the dual functions of CTC sensing and PTT, which provided a new idea for the early diagnosis and treatment of cancer.
Assuntos
Ouro , Indóis , Nanopartículas Metálicas , Terapia Fototérmica , Polímeros , Ressonância de Plasmônio de Superfície , Humanos , Ouro/química , Indóis/química , Polímeros/química , Nanopartículas Metálicas/química , Tecnologia de Fibra Óptica , Células Neoplásicas Circulantes/patologia , Nanotubos/química , Fibras Ópticas , Linhagem Celular TumoralRESUMO
The development of label-free and sensitive detection of pathogenic bacteria is of great significance for disease prevention and public health protection. In this study, an originally bent structure, named as J-shaped optical fiber probe, was first designed to engineer a localized surface plasmon resonance (LSPR) aptamer biosensor for the rapid and ultrasensitive detection of Helicobacter pylori (H. pylori). The J-shaped optical fiber probe exhibited a significant improvement in refractive index sensitivity (RIS) and LSPR signal response. Meantime, the original sequence of aptamer was truncated in order to effectively capture H. pylori on the optical fiber surface. Besides, a spacer nucleic acid with short stem-loop structure was adopted to control the aptamer density on gold nanoparticles (AuNPs) on the surface of the J-shaped optical fiber probe, which displayed a further enhancement in LSPR signal response. Benefitting from these creative designs, the proposed LSPR biosensor can realize label-free and sensitive detection of H. pylori with a detection limit as low as 45 CFU/mL and a wide linear range from 1.0 × 102 CFU/mL to 1.0 × 108 CFU/mL. At the same time, the sensing strategy can detect the pathogenic bacteria from actual water samples in one step just in 30 min without any sample pretreatment. Due to the advantages of ease-to-preparation, high sensitivity, and rapid analysis, this proposed J-shaped optical fiber LSPR aptasensor can provide a potential strategy for point-of-caring detection of pathogenic bacteria in environmental monitoring and disease diagnosis.
Assuntos
Helicobacter pylori , Nanopartículas Metálicas , Ressonância de Plasmônio de Superfície , Ouro , Fibras Ópticas , OligonucleotídeosRESUMO
Food safety is a concerning issue globally. Foodborne-pathogenic-bacteria-derived foodborne disease outbreaks have increased the threat to human health. The accurate and rapid detection of foodborne bacteria is of great significance for food safety. A fiber-optic-based biosensor has emerged as a powerful technique for the point-of-care testing of foodborne bacteria in food and agricultural products. This Perspective discusses the opportunities and challenges of fiber-optic-based biosensors for foodborne bacteria detection. The corresponding solution strategies to promote the application of this innovative technology in food and agricultural product detection for food safety and human health are also discussed and proposed.
Assuntos
Técnicas Biossensoriais , Doenças Transmitidas por Alimentos , Humanos , Contaminação de Alimentos/análise , Microbiologia de Alimentos , Inocuidade dos Alimentos , Técnicas Biossensoriais/métodos , Doenças Transmitidas por Alimentos/microbiologia , Tecnologia , Bactérias/genéticaRESUMO
Circulating cell-free DNA (cfDNA) is a promising biomarker of liquid biopsy, but it still faces some difficulties in achieving sensitive and convenient detection. Herein, an Ω-shaped fiber optic localized surface plasmon resonance (FO-LSPR) biosensor based on hybridization chain reaction (HCR) coupled with gold nanoparticles (AuNPs) was developed, and applied in simple and sensitive detection of cfDNA. Specifically, one-base mismatch was designed in HCR hairpins (H1 and H2) to obtain high reaction efficiency, and AuNPs was introduced onto H1 through poly-adenine to construct HCR coupled with AuNPs strategy. Meanwhile, target cfDNA was designed into two domains: one could trigger HCR to generate dsDNA concatemer carrying numerous AuNPs, and the other could hybridize with capture DNA on the surface of Ω-shaped fiber optic (FO) probes. Thus, the presence of target cfDNA would initiate HCR, and bring the formed dsDNA concatemer and AuNPs to approach the probe surface, resulting in dramatically amplified LSPR signal. Besides, HCR required simple isothermal and enzyme-free condition, and Ω-shaped FO probe with high refractive index sensitivity just needed to be immersed into HCR solution directly for signal monitoring. Benefiting from the synergetic amplification of mismatched HCR and AuNPs, the proposed biosensor exhibited high sensitivity with a limit of detection of 14.0 pM, and therefore could provide a potential strategy for biomedical analysis and disease diagnosis.
Assuntos
Técnicas Biossensoriais , Ácidos Nucleicos Livres , Nanopartículas Metálicas , Ouro , Hibridização de Ácido Nucleico/métodos , DNA/genética , DNA/análise , Limite de DetecçãoRESUMO
BACKGROUND AND AIM: Breast cancer (BC) is the leading cause of cancer-related death in females. The development of non-invasive methods for the early diagnosis of BC still remains challenge. Here, we aimed to discover the urinary volatile organic compounds (VOCs) pattern of BC patients and identify potential VOC biomarkers for BC diagnosis. METHODS: Urine samples were analyzed by headspace-solid phase microextraction (HS-SPME) combined with gas chromatography-high resolution mass spectrometry (GC-HRMS). To assure reliable analysis, the factors influencing HS-SPME extraction efficiency were comprehensively investigated and optimized by combing the Plackett-Burman design (PBD) with the central composite design (CCD). The established HS-SPME/GC-HRMS method was validated and applied to analyze urine samples from BC patients (n = 80) and healthy controls (n = 88). RESULTS: A total number of 134 VOCs belonging to distinct chemical classes were identified by GC-HRMS. BC patients demonstrated unique urinary VOCs pattern. Orthogonal partial least squares-discriminant analysis (OPLS-DA) showed a clear separation between BC patients and healthy controls. Eight potential VOC biomarkers were identified using multivariate and univariate statistical analysis. The predictive ability of candidate VOC biomarkers was further investigated by the random forest (RF) algorithm. The candidate VOC biomarkers yielded 76.3% sensitivity and 85.4% specificity on the training set, and achieved 76.0% sensitivity and 92.3% specificity on the validation set. CONCLUSIONS: Overall, this work not only established a standardized HS-SPME/GC-HRMS approach for urinary VOCs analysis, but also highlighted the value of urinary VOCs for BC diagnosis. The knowledge gained from this study paves the way for early diagnosis of BC using urine in a non-invasive manner.
Assuntos
Neoplasias da Mama , Compostos Orgânicos Voláteis , Feminino , Humanos , Neoplasias da Mama/diagnóstico , Biomarcadores Tumorais/urina , Compostos Orgânicos Voláteis/urina , Microextração em Fase Sólida/métodos , Cromatografia Gasosa-Espectrometria de Massas/métodosRESUMO
SARS-CoV-2, especially the variant strains, is rapidly spreading around the world. Rapid detection methods for the virus are crucial for controlling the COVID-19 epidemic. Herein, a localized surface plasmonic resonance (LSPR) biosensor based on Ω-shaped fiber optic (Ω-FO) was developed for dual assays of SARS-CoV-2 monitoring. Due to its strong ability to control the orientation and density, a new T-shaped aptamer exhibits enhanced binding affinity toward N proteins. After being combined on the fiber optic surface, the T-shaped aptamer sensitively captured N proteins of SARS-CoV-2 for a direct assay. Further, core-shell structured gold/silver nanoparticles functionalized with a T-shaped aptamer (apt-Ag@AuNPs) can amplify the signal of N protein detection for a sandwich assay. The real-time analytical feature of the dual assays endows time-dependent sensitivity enhancement behavior, which provides a guideline to save analytical time. With those characteristics, the LSPR biosensor has been successfully used to rapidly identify 39 healthy volunteers and 39 COVID-19 patients infected with the ancestral or variant SARS-CoV-2. With the help of simple pretreatment, we obtain a true negative rate of 100% and a true positive rate of 92.3% with a short analysis time of 45 min using the direct assay. Further, the LSPR biosensor could also broaden the detection application range to the surface of cold-chain foods using a sandwich assay. Thus, the LSPR biosensor based on Ω-FO was demonstrated to have broad application potential to detect SARS-CoV-2 rapidly.
Assuntos
Técnicas Biossensoriais , COVID-19 , Nanopartículas Metálicas , Humanos , Ressonância de Plasmônio de Superfície/métodos , SARS-CoV-2 , Ouro , COVID-19/diagnóstico , Prata , Técnicas Biossensoriais/métodos , OligonucleotídeosRESUMO
Both apurinic/apyrimidinic endonuclease 1 (APE1) and microRNA-21 (miRNA-21) have been reported to be related to tumors, enabling them to be the biomarkers of several cancers. This has led to the development of various biosensors to detect APE1 or miRNA-21. However, biosensors that focus on single target detection are subject to low accuracy. In this work, a fluorescent biosensor based on enzyme-involved catalytic hairpin assembly (CHA) for the detection of APE1 and miRNA-21 was developed, aimed at improving the accuracy of early-phase diagnosis of cancers. Two hairpin structured DNA probes (H1 and H2) were utilized to concatenate the enzyme-assisted circuit and CHA circuit in the system. The stem of H1 with a blunt end was modified with an AP site, while H2 was modified with 6-FAM at the 5' terminal and Dabcyl at the 3' terminal. In the presence of APE1, H1 was cleaved from the AP site to expose the toehold sequence. Then, miRNA-21 bound with the toehold sequence to initiate the CHA reaction between H1 and H2. The assembled product of CHA triggered the 6-FAM of H2 at a distance from Dabcyl, which recovered the fluorescence signal. It is worth noting that only under the co-stimulation of APE1 and miRNA-21 can the fluorescence signal be detected, indicating that the biosensor could work as an AND logic gate. The proposed dual-functional biosensor achieved a limit of detection (LOD) of 0.016 U mL-1 for APE1 and 0.25 nM for miRNA-21 and APE1, respectively, and also exhibits good selectivity and stability for the two biomarkers. Thus, the biosensor has great potential to be applied as a new platform for cancer diagnosis.
Assuntos
Técnicas Biossensoriais , MicroRNAs , Biomarcadores , Endonucleases , Limite de Detecção , MicroRNAs/genéticaRESUMO
Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.
RESUMO
In recent years, semiconducting polymer dots (Pdots) as environmentally friendly and high-brightness electrochemiluminescence (ECL) nanoemitters have attracted intense attention in ECL biosensing and imaging. However, most of the available Pdots have a high ECL excitation potential in the aqueous phase (>1.0 V vs Ag/AgCl), which causes poor selectivity in actual sample detection. Therefore, it is particularly important to construct a simple and universal strategy to lower the trigger potential of Pdots. This work has realized the ECL emission of Pdots at low-trigger-potential based on the electrochemiluminescence resonance energy transfer (ERET) strategy. By covalently coupling the Pdots with a luminol analogue, N-(4-aminobutyl)-N-ethylisoluminol (ABEI), the ABEI-Pdots showed an anodic ECL emission with a low onset potential of +0.34 V and a peak potential at +0.45 V (vs Ag/AgCl), which was the lowest trigger potential reported so far. We further explored this low-triggering-potential ECL for imaging detection of glucose in buffer and serum. By imaging the ABEI-Pdots-modified screen-printed electrodes (SPCE) at +0.45 V for 16 s, the ECL imaging method could quantify the glucose concentration in buffer from 10 to 200 µM with detection limits of 3.3 µM, while exhibiting excellent selectivity. When applied to real serum, the results of our method were highly consistent with a commercial blood glucose meter, with the relative errors ranging from 3.2 to 13%. This work provided a universal strategy for constructing low potential Pdots and demonstrated its application potential in complex biological sample analysis.
Assuntos
Técnicas Biossensoriais , Luminol , Técnicas Biossensoriais/métodos , Glicemia , Técnicas Eletroquímicas/métodos , Medições Luminescentes/métodos , PolímerosRESUMO
The development of rapid and sensitive detection methods for pathogenic bacteria is crucial for the therapy and prevention of related diseases. However, the rapid and ultrasensitive assays are difficult to be realized simultaneously. To solve the problem, a sandwich method based on Ω-shaped fiber optic localized surface resonance (Ω-FOLSPR) was constructed, where poly adenine-tailed aptamer (PolyA-apt) and SH modified gold nanoparticles tags (AuNPs tags) were chosen as the capturing aptamer and amplifying tags, respectively. The small AuNPs were modified on the surface of fiber-optic (FO) rapidly, which saved the preparation time. Then, the PolyA-apt was modified on the AuNPs surface to capture the bacteria effectively due to its ability to adjust the density and conformation of aptamer on the AuNPs surface. Finally, the large AuNPs tags were used to generate intense signal enhancement. It is found that the sandwich method enables the unique characteristic of a time-dependent sensitivity enhancement. Specifically, the LOD of 108.0 CFU/mL and 7.4 CFU/mL was achieved with the analysis time of 10 min and 100 min, respectively. Besides, the Ω-FOLSPR sensor exhibits excellent selectivity against the other bacteria and good performance for detecting the spiked and natural samples. This sandwich method provides a time-flexible strategy due to the combination of effective signal amplification and real-time analysis for bacterial detection, displaying great potential for practical bacterial detection.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , Nanopartículas Metálicas , Bactérias , Ouro , Limite de Detecção , Ressonância de Plasmônio de SuperfícieRESUMO
Polyploidy plays an important role in the evolution of eukaryotes, especially for flowering plants. Many of ecologically or agronomically important plant or crop species are polyploids, including sycamore maple (tetraploid), the world second and third largest food crops wheat (hexaploid) and potato (tetraploid) as well as economically important aquaculture animals such as Atlantic salmon and trout. The next generation sequencing data enables to allocate genotype at a sequence variant site, known as genotyping by sequencing (GBS). GBS has stimulated enormous interests in population based genomics studies in almost all diploid and many polyploid organisms. DNA sequence polymorphisms are codominant and thus fully informative about the underlying genotype at the polymorphic site, making GBS a straightforward task in diploids. However, sequence data may usually be uninformative in polyploid species, making GBS a far more challenging task in polyploids. This paper presents novel and rigorous statistical methods for predicting the number of sequence reads needed to ensure accurate GBS at a polymorphic site bared by the reads in polyploids and shows that a dozen of reads can ensure a probability of 95% to recover all constituent alleles of any tetraploid genotype but several hundreds of reads are needed to accurately uncover the genotype with probability confidence of 90%, subverting the proposition of GBS using low coverage sequence data in the literature. The theoretical prediction was tested by use of RAD-seq data from tetraploid potato cultivars. The paper provides polyploid experimentalists with theoretical guides and methods for designing and conducting their sequence-based studies.
Assuntos
Técnicas de Genotipagem , Sequenciamento de Nucleotídeos em Larga Escala , Plantas , Poliploidia , Alelos , Diploide , Genótipo , Sequenciamento de Nucleotídeos em Larga Escala/métodos , Plantas/genéticaRESUMO
Förster resonance energy transfer (FRET) microscopy is an important tool suitable for studying molecular interactions in living cells. Optical section structured illumination microscopy (OS-SIM), like confocal microscopy, has about 200 nm spatial resolution. In this report, we performed quantitative 3-cube FRET imaging in OS-SIM mode and widefield microscopy (WF) mode, respectively, for living cells expressing FRET constructs consisting of Cerulean (C, donor) and Venus (V, acceptor). OS-SIM images exhibited higher resolution than WF images. Four spectral crosstalk coefficients measured under OS-SIM mode are consistent with those measured under WF mode. Similarly, the system calibration factors G and k measured under OS-SIM mode were consistent with those measured under WF mode. The measured FRET efficiency (E) values of C32V and C17V as well as C5V constructs, standard FRET plasmids, in living Hela cells were EC32VOSF=0.32±0.02,EC17VOSF=0.38±0.02 , and EC5VOSF=0.45±0.03 , and the measured acceptor-to-donor concentration ratios ( Rc ) were RC32VOSF=1.07±0.03 , RC17VOSF=1.09±0.03 , and RC5VOSF=1.02±0.04 , consistent with the reported values. Collectively, our data demonstrates that OS-SIM can be integrated into FRET microscopy to build an OS-SIM-FRET with confocal microscopy-like resolution.
Assuntos
Transferência Ressonante de Energia de Fluorescência , Iluminação , Transferência Ressonante de Energia de Fluorescência/métodos , Células HeLa , Humanos , Microscopia Confocal/métodosRESUMO
Gastric cancer is a common malignancy, being the fifth most frequently diagnosed cancer and the fourth leading cause of cancer-related deaths worldwide. Diagnosis of gastric cancer at the early stage is critical to effectively improve the survival rate. However, a substantial proportion of patients with gastric cancer in the early stages lack specific symptoms or are asymptomatic. Moreover, the imaging techniques currently used for gastric cancer screening, such as computed tomography and barium examination, are usually radioactive and have low sensitivity and specificity. Even though endoscopy has high accuracy for gastric cancer screening, its application is limited by the invasiveness of the technique. Breath analysis is an economic, effective, easy to perform, non-invasive detection method, and has no undesirable side effects on subjects. Extensive worldwide research has been conducted on breath volatile organic compounds (VOCs), which reveals its prospect as a potential method for gastric cancer detection. Many interesting results have been obtained and innovative methods have been introduced in this subject; hence, an extensive review would be beneficial. By providing a comprehensive list of breath VOCs identified by gastric cancer would promote further research in this field. This review summarizes the commonly used technologies for exhaled breath analysis, focusing on the application of analytical instruments in the detection of breath VOCs in gastric cancers, and the alterations in the profile of breath biomarkers in gastric cancer patients are discussed as well.
Assuntos
Neoplasias Gástricas , Compostos Orgânicos Voláteis , Testes Respiratórios , Detecção Precoce de Câncer , Expiração , Humanos , Neoplasias Gástricas/diagnóstico por imagemRESUMO
Inadequate sensitivity and side-effect are the main challenges to develop cytosensors combining with therapeutic potential simultaneously for cancer diagnosis and treatment. Herein, localized surface plasma resonance (LSPR) based on hybridized nanolayer modified Ω-shaped fiber-optic (HN/Ω-FO) was developed to integrate cytosensor and plasmonic photothermal treatment (PPT). On one hand, hybridized nanolayers improve the coverage of nanoparticles and refractive index sensitivity (RIS). Moreover, the hybridized nanoploymers of gold nanorods/gold nanoparticles (AuNRs/AuNPs) also result in intense enhancement in electronic field intensity (I). On the other hand, Ω-shaped fiber-optic (Ω-FO) led to strong bending loss in its bending part. To be specific, a majority of light escaped from fiber will interact with HN. Thus, HN/Ω-FO synergistically enhances the plasmonic, which achieved the goal of ultrasensitive cytosensor and highly-efficient plasmonic photothermal treatment (PPT). The proposed cytosensor exhibits ultrasensitivity for detection of cancer cells with a low limit of detection down to 2.6 cells/mL was realized just in 30 min. HN/Ω-FO-based LSPR exhibits unique characteristics of highly efficient, localized, and geometry-dependent heat distribution, which makes it suitable for PPT to only kill the cancer cells specifically on the surface or surrounding fiber-optic (FO) surface. Thus, HN/Ω-FO provides a new approach to couple cytosensor with PPT, indicating its great potential in clinical diagnosis and treatment.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Ouro , Terapia Fototérmica , Ressonância de Plasmônio de SuperfícieRESUMO
Sensitive and efficient monitoring of food-borne bacteria is of great importance for food safety control. Herein, a novel biosensor for highly sensitive detection of Staphylococcus aureus (S. aureus) was constructed by combining hybridization chain reaction (HCR) and nicking enzyme. Different from the upstream-downstream based circuit, the proposed biosensor integrated HCR circuit and three-way DNA junction nicking enzyme assisted signal amplification (3WJ-NEASA) into a virtuous circle of promotion. In the HCR-mediated 3WJ-NEASA sensing strategy, target DNA of S. aureus initiated the self-assembly between HCR hairpins (H1 and H2), which exposed the gap to capture molecular beacon (MB) and construct the 3WJ structure. Meanwhile, MB increased the stability of HCR nanowires and enhanced the efficiency of the HCR circuit, and thus more 3WJ-NEASA circuits were generated in HCR nanowires. Benefiting from the synergistic amplification coupling HCR and 3WJ-NEASA, this isothermal biosensor can detect as low as 6.7 pM of target DNA in one step within only 30 min. Furthermore, the HCR-mediated 3WJ-NEASA assay has been applied in the detection of S. aureus with a limit of detection (LOD) as low as 1.2 × 101 cfu mL-1, and has exhibited reliable practicability in spiked milk. It is the first time that a DNA biosensor combining HCR and 3WJ-NEASA for dual signal amplification was developed and has been adopted to the sensitive analysis of food-borne bacteria. Additionally, this strategy can serve as a universal platform for monitoring other analytes, and therefore possesses broad application prospects in food safety and environmental monitoring.
Assuntos
Técnicas Biossensoriais , Staphylococcus aureus , DNA , Desoxirribonuclease I , Limite de Detecção , Técnicas de Amplificação de Ácido Nucleico , Hibridização de Ácido Nucleico , Staphylococcus aureus/genéticaRESUMO
Compared with high molecular weight chitosan (HMWC), low molecular weight chitosan (LMWC) has better solubility and biological activity. However, there is no quick and environmentally friendly to prepare low molecular chitosan. In this study, microwave induced plasma desorption/ionization (MIPDI) was used for the first time to prepare LMWC through the degradation processes of HMWC. The results showed that MIPDI has the most abundant âOH content at the gas-liquid interface, and the active particles represented by âOH can degrade chitosan with a molecular weight of 540 KDa into soluble chitosan (≤ 10 KDa), and the yield of soluble chitosan can reach 61% in 60 min. Moreover, a series of characterization results showed that the chain structure and crystal structure gradually degraded as the treatment time increased while the chemical structure of chitosan did not change significantly. Antibacterial experiments also indicated that the antimicrobial property of LMWC obtained by MIPDI degradation was improved. In short, this method has proven to be a new, fast and green processing method for the preparation of low molecular chitosan.
Assuntos
Antibacterianos/efeitos da radiação , Quitosana/efeitos da radiação , Química Verde , Radical Hidroxila/química , Micro-Ondas , Antibacterianos/química , Antibacterianos/farmacologia , Quitosana/química , Quitosana/farmacologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Peso Molecular , Solubilidade , Fatores de TempoRESUMO
As an enzyme-free isothermal amplification strategy, catalytic hairpin assembly (CHA) is a very promising method for cell imaging. However, the practical application of CHA on intracellular miRNA imaging is limited by slow kinetics, insufficient amplification efficiency and strong interference in living cells. Herein, a localized catalytic hairpin assembly-based DNA nanomachine (LCHA nanomachine) was developed for the rapid, efficient and reliable fluorescence resonance energy transformation (FRET) imaging of miRNA-21 in living cells. The nanomachine was simply constructed by a one-step self-assembly process of a stator strand, a pair of hairpin probes from CHA and an AS1411 aptamer. Benefiting from the spatial-confinement effect, a pair of hairpin probes with high collision frequency was rapidly and efficiently assembled using miRNA-21 as the catalyst on a stator strand in every nanomachine. Compared with the free-CHA nanomachine, the LCHA nanomachine shortened the reaction time by 4.5-fold for reaching a plateau and significant improved the sensitivity by 7.6-fold for miRNA-21 detection in vitro. Importantly, the nanomachine was successfully applied for miRNA-21 imaging in living cells. With the assistance of an AS1411 aptamer and stator strand, the pair of hairpin probes with the ratio of 1 : 1 synchronously transported into a co-site of the cytoplasm, which ensures efficient imaging of trace miRNA-21. The signal output of the ratio of 6-carboxy-fluorescein (FAM) to tetramethyl rhodamine (TAMRA) intensities guaranteed reliability through avoiding the interference from different amounts of the nanomachine that enters into cells. Notably, the nanomachine can distinguish the miRNA-21 expression level in different kinds of cancer cells. By virtue of the advantages of simplicity, efficiency and reliability, the proposed strategy provides a powerful method for exploring the functions of miRNA and diagnosis of disease.
Assuntos
Técnicas Biossensoriais , DNA Catalítico , MicroRNAs , Catálise , MicroRNAs/genética , Reprodutibilidade dos TestesRESUMO
The new sequencing technology enables identification of genome-wide sequence-based variants at a population level and a competitively low cost. The sequence variant-based molecular markers have motivated enormous interest in population and quantitative genetic analyses. Generation of the sequence data involves a sophisticated experimental process embedded with rich non-biological variation. Statistically, the sequencing process indeed involves sampling DNA fragments from an individual sequence. Adequate knowledge of sampling variation of the sequence data generation is one of the key statistical properties for any downstream analysis of the data and for implementing statistically appropriate methods. This paper reports a thorough investigation on modeling the sampling variation of the sequence data from the optimized RAD-seq (Restriction sit associated DNA sequencing) experiments with two parents and their offspring of diploid and autotetraploid potato (Solanum tuberosum L.). The analysis shows significant dispersion in sampling variation of the sequence data over that expected under multinomial distribution as widely assumed in the literature and provides statistical methods for modeling the variation and calculating the model parameters, which may be easily implemented in real sequence datasets. The optimized design of RAD-seq experiments enabled effective control of presentation of undesirable chloroplast DNA and RNA genes in the sequence data generated.