RESUMO
Redox-active polymers serving as the active materials in solid-state electrodes offer a promising path toward realizing all-organic batteries. While both cathodic and anodic redox-active polymers are needed, the diversity of the available anodic materials is limited. Here, we predict solid-state structural, ionic, and electronic properties of anodic, phthalimide-containing polymers using a multiscale approach that combines atomistic molecular dynamics, electronic structure calculations, and machine learning surrogate models. Importantly, by combining information from each of these scales, we are able to bridge the gap between bottom-up molecular characteristics and macroscopic properties such as apparent diffusion coefficients of electron transport (D app). We investigate the impact of different polymer backbones and of two critical factors during battery operation: state of charge and polymer swelling. Our findings reveal that the state of charge significantly influences solid-state packing and the thermophysical properties of the polymers, which, in turn, affect ionic and electronic transport. A combination of molecular-level properties (such as the reorganization energy) and condensed-phase properties (such as effective electron hopping distances) determine the predicted ranking of electron transport capabilities of the polymers. We predict D app for the phthalimide-based polymers and for a reference nitroxide radical-based polymer, finding a 3 orders of magnitude increase in D app (≈10-6 cm2 s-1) with respect to the reference. This study underscores the promise of phthalimide-containing polymers as highly capable redox-active polymers for anodic materials in all-organic batteries, due to their exceptional predicted electron transport capabilities.
RESUMO
Salt acts as a plasticizer in polyelectrolyte complexes (PECs), which impacts the physical, thermal, and mechanical properties, thus having implications in applications, such as drug delivery, energy storage, and smart coatings. Added salt disrupts polycation-polyanion intrinsic ion pairs, lowering a hydrated PEC's glass transition temperature (Tg). However, the relative influence of counterion type on the PEC's Tg is not well understood. Here, the effect of anion type (NaCl, NaBr, NaNO3, and NaI) on the Tg of solid-like, hydrated PECs composed of poly(diallydimethylammonium) (PDADMA)-poly(styrenesulfonate) (PSS) is investigated. With increasing the chaotropic nature of the salt anion, the Tg decreases. The relative differences are attributed to the doping level, the amount of bound water, the mobility of water molecules within the PECs, and the strength of interactions between the PEs. For all studied salt concentrations and salt types, the Tg followed the scaling of -1/Tg ≈ ln([IP]/[H2O]), in which [IP]/[H2O] is the ratio of intrinsic pairs to water. The scaling estimates that about 7 to 17% of the intrinsic ion pairs should be weakened for the PEC to partake in a glass transition. Put together, this study highlights that the Tg in PECs is impacted by the salt anion, but the mechanism of the glass transition remains unchanged.
RESUMO
Organic batteries are one of the possible routes for transitioning to sustainable energy storage solutions. However, the recycling of organic batteries, which is a key step toward circularity, is not easily achieved. This work shows the direct recycling of poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl) (PTMA) and poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl acrylamide) (PTAm) based composite electrodes. After charge-discharge cycling, the electrodes are deconstructed using a solubilizing-solvent and then reconstructed using a casting-solvent. The electrochemical properties of the original and recycled electrodes are compared using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) cycling, from which it is discovered using time-of-flight secondary ion mass spectrometry (ToF-SIMS) that recycling can be challenged by the formation of a cathode electrolyte interphase (CEI). In turn, an additive is proposed to modify the CEI layer and improve the properties after recycling. Last, an anionic rocking chair battery consisting of PTAm electrodes as both positive and negative electrodes is demonstrated, in which the electrodes are recycled to form a new battery. This work demonstrates the recycling of composite electrodes for organic batteries and provides insights into the challenges and possible solutions for recycling the next-generation electrochemical energy storage devices.
RESUMO
The coacervation and complexation of oppositely charged polyelectrolytes are dependent on numerous environmental and preparatory factors, but temperature is often overlooked. Temperature effects remain unclear because the temperature dependence of both the dielectric constant and polymer-solvent interaction parameter can yield lower and/or upper critical solution phase behaviors for PECs. Further, secondary interactions, such as hydrogen bonding, can affect the temperature response of a PEC. That is, mixtures of oppositely charged polyelectrolytes can exhibit phase separation upon lowering and/or increasing the mixture's temperature. Here, the phase behavior of poly(diallylmethylammonium)/poly(acrylic acid) (PDADMA/PAA) complexes under varying KBr ionic strengths, mixing ratios, and temperatures at a fixed pH (in which PAA hydrogen bonding can occur) is examined. At room temperature, the PDADMA/PAA PECs exhibit four different phase states: precipitate, coexisting precipitate and coacervate, solid-like gel, and coacervate. Variable-temperature optical microscopy reveals the upper critical solution temperature (UCST) at which each phase transitioned to a solution state. Interestingly, the UCST value is highly dependent on the original phase of the PEC, in which solid-like precipitates exhibit higher UCST values. Large-scale all-atom molecular dynamics (MD) simulations support that precipitates exhibit kinetic trapping, which may contribute to the higher UCST values observed in the experiment. Taken together, this study highlights the significance of temperature on the phase behavior of PECs, which may play a larger role in stimuli-responsive materials, membraneless organelles, and separations applications.
RESUMO
Although surface terminations (such as âO, -Cl, -F, and -OH) on MXene nanosheets strongly influence their functional properties, synthesis of MXenes with desired types and distribution of those terminations is still challenging. Here, it is demonstrated that thermal annealing helps in removing much of the terminal groups of molten salt-etched multilayered (ML) Ti3C2Tz. In this study, the chloride terminations of molten salt-etched ML-Ti3C2Tz were removed via thermal annealing at increased temperatures under an inert (argon) atmosphere. This thermal annealing created some bare sites available for further functionalization of Ti3C2Tz. XRD, EDS, and XPS measurements confirm the removal of much of the terminal groups of ML-Ti3C2Tz. Here, the annealed ML-Ti3C2Tz was refunctionalized by -OH groups and 3-aminopropyl triethoxysilane (APTES), which was confirmed by FTIR. The -OH and APTES surface-modified ML-Ti3C2Tz are evaluated as a solid lubricant, exhibiting â¼70.1 and 66.7% reduction in friction compared to a steel substrate, respectively. This enhanced performance is attributed to the improved interaction or adhesion of functionalized ML-Ti3C2Tz with the substrate material. This approach allows for the effective surface modification of MXenes and control of their functional properties.
RESUMO
Polyelectrolyte multilayers (PEMs) or polyelectrolyte complexes (PECs), formed by layer-by-layer assembly or the mixing of oppositely charged polyelectrolytes (PEs) in aqueous solution, respectively, have potential applications in health, energy, and the environment. PEMs and PECs are very tunable because their structure and properties are influenced by factors such as pH, ionic strength, salt type, humidity, and temperature. Therefore, it is increasingly important to understand how these factors affect PECs and PEMs on a molecular level. In this Feature Article, we summarize our contributions to the field in the development of approaches to quantify the swelling, thermal properties, and dynamic mechanical properties of PEMs and PECs. First, the role of water as a plasticizer and in the glass-transition temperature (Tg) in both strong poly(diallyldimethylammonium)/poly(sodium 4-styrenesulfonate) (PDADMA/PSS) and weak poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA) systems is presented. Then, factors influencing the dynamics of PECs and PEMs are discussed. We also reflect on the swelling of PEMs in response to different salts and solvent additives. Last, the nature of water's microenvironment in PEMs/PECs is discussed. A special emphasis is placed on experimental techniques, along with molecular simulations. Taken together, this review presents an outlook and offers recommendations for future research directions, such as studying the additional effects of hydrogen-bonding hydrophobic interactions.
RESUMO
MXenes are 2D nanomaterials which have gained considerable attention from researchers since their discovery in 2011. However, the propensity of these 2D nanomaterials to degrade affects their shelf life. While many studies have focused on the external factors affecting the degradation of MXenes, the effect of internal factors such as terminal groups is not well understood. In this paper, we use -Br and -Cl terminations as model terminal groups to compare the degradation stability of MXenes. From our experiments we observe that -Br terminated ML-Ti3C2Tz degrades faster than -Cl terminated ML-Ti3C2Tz. Our study confirms that terminal groups do affect the degradation rate of Ti3C2Tz. The results suggest that the differences in bond dissociation energy of the M-X bond are responsible for variations in the degradation stability of MXenes. This model study can be generalized to compare the effect of terminal groups on the degradation stability of MXenes.
RESUMO
We show by extensive experimental characterization combined with molecular simulations that pH has a major impact on the assembly mechanism and properties of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) complexes. A combination of dynamic light scattering (DLS) and laser Doppler velocimetry (LDV) is used to assess the complexation, charge state, and other physical characteristics of the complexes, isothermal titration calorimetry (ITC) is used to examine the complexation thermodynamics, and circular dichroism (CD) is used to extract the polypeptides' secondary structure. For enhanced analysis and interpretation of the data, analytical ultracentrifugation (AUC) is used to define the precise molecular weights and solution association of the peptides. Molecular dynamics simulations reveal the associated intra- and intermolecular binding changes in terms of intrinsic vs. extrinsic charge compensation, the role of hydrogen bonding, and secondary structure changes, aiding in the interpretation of the experimental data. We combine the data to reveal the pH dependency of PLL/PGA complexation and the associated molecular level mechanisms. This work shows that not only pH provides a means to control complex formation but also that the associated changes in the secondary structure and binding conformation can be systematically used to control materials assembly. This gives access to rational design of peptide materials via pH control.
Assuntos
Ácido Glutâmico , Polilisina , Polilisina/química , Peptídeos/química , Estrutura Secundária de Proteína , Concentração de Íons de Hidrogênio , Dicroísmo CircularRESUMO
The storage of electric energy in a safe and environmentally friendly way is of ever-growing importance for a modern, technology-based society. With future pressures predicted for batteries that contain strategic metals, there is increasing interest in metal-free electrode materials. Among candidate materials, nonconjugated redox-active polymers (NC-RAPs) have advantages in terms of cost-effectiveness, good processability, unique electrochemical properties, and precise tuning for different battery chemistries. Here, we review the current state of the art regarding the mechanisms of redox kinetics, molecular design, synthesis, and application of NC-RAPs in electrochemical energy storage and conversion. Different redox chemistries are compared, including polyquinones, polyimides, polyketones, sulfur-containing polymers, radical-containing polymers, polyphenylamines, polyphenazines, polyphenothiazines, polyphenoxazines, and polyviologens. We close with cell design principles considering electrolyte optimization and cell configuration. Finally, we point to fundamental and applied areas of future promise for designer NC-RAPs.
Assuntos
Elétrons , Polímeros , Transporte de Elétrons , Oxirredução , Fenômenos FísicosRESUMO
Metal-free aqueous batteries can potentially address the projected shortages of strategic metals and safety issues found in lithium-ion batteries. More specifically, redox-active non-conjugated radical polymers are promising candidates for metal-free aqueous batteries because of the polymers' high discharge voltage and fast redox kinetics. However, little is known regarding the energy storage mechanism of these polymers in an aqueous environment. The reaction itself is complex and difficult to resolve because of the simultaneous transfer of electrons, ions and water molecules. Here we demonstrate the nature of the redox reaction for poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl acrylamide) by examining aqueous electrolytes of varying chao-/kosmotropic character using electrochemical quartz crystal microbalance with dissipation monitoring at a range of timescales. Surprisingly, the capacity can vary by as much as 1,000% depending on the electrolyte, in which certain ions enable better kinetics, higher capacity and higher cycling stability.
RESUMO
MXenes are 2D nanomaterials with a wide array of possible compositions; they feature a unique combination of properties such as high electrical conductivity, hydrophilicity, and colloidal stability which makes them attractive for a variety of applications. However, the shelf life and industrial utility of MXenes face challenges due to their tendency to oxidize and disintegrate, particularly in dispersions. Thus, it is crucial to find effective ways to ensure the degradation stability of MXenes. This feature article reviews the key factors affecting the degradation of MXenes such as pH, concentration of the dispersion, humidity, and storage temperature. In addition, we review our group's progress in mitigating the degradation of MXenes such as low-temperature storage, the use of antioxidants, and thermal annealing, particularly for Ti3C2Tz. These simple approaches may allow for applications of MXenes on a commercial scale.
RESUMO
Charge transfer in nonconjugated redox-active polymers is influenced by redox site proximity and polymer flexibility, but it is challenging to observe these effects independently. In this work, spatially defined radical-containing polymers are synthesized by using acyclic diene metathesis (ADMET) polymerization of α,ω-dienes bearing a central activated ester. Postpolymerization functionalization with 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl (4-amino-TEMPO) introduces TEMPO radical groups onto the polymer backbone through amide linkages to yield spatially defined polymers with radical units every 9, 11, 15, and 21 carbons. Increased radical spacing leads to reduced spin-spin coupling and increased chain flexibility. The glass transition temperatures (Tg) range from 47.6 to -13.8 °C, depending on the radical spacing. The spatially defined TEMPO-substituted polymer with a spacing length of 15 carbons displays the lowest Tg and the shortest hopping distance, as shown through molecular dynamics simulations. Also, this polymer displays kinetics 1000 times faster than the commonly studied TEMPO-containing polymer poly(2,2,6,6-tetramethylpiperidinyloxy-4-ylacrylamide) (PTAm). Remarkably, comparison of the diffusion and kinetics attributed to the redox reaction reveals that both the apparent diffusion coefficient and the self-exchange reaction rate constant are correlated to the polymer's Tg as log[Dapp] and log[kex,app] â¼ Tg, respectively. Critically, these data demonstrate that controlling the spacing of redox-active groups along a polymer backbone strongly influences backbone flexibility and radical packing, which leads to synergetic improvements in the charge transfer kinetics of nonconjugated redox-active polymers.
RESUMO
A fuel cell gains more power from ion-conducting, porous covalent organic frameworks.
RESUMO
Despite numerous prior reports of molten salt etching of MAX phases, few of these reports achieved water-dispersible MXene nanosheets, and none for Nb-based MXenes. Here we demonstrate the synthesis and aqueous dispersibility of Nb2CTZ nanosheets via molten salt etching and utilizing a KOH wash to add hydroxyl surface groups. However, little is known about the oxidation of molten salt etched MXenes compared to acid-etched MXenes. Our results indicate slower oxidation behavior for MXenes etched by molten salts, which may be due to the decreased amount of oxygen-containing terminal groups.
RESUMO
Water existing within thin polyelectrolyte multilayer (PEM) films has significant influence on their physical, chemical, and thermal properties, having implications for applications including energy storage, smart coatings, and biomedical systems. Ionic strength, salt type, and terminating layer are known to influence PEM swelling. However, knowledge of water's microenvironment within a PEM, whether that water is affiliated with intrinsic or extrinsic ion pairs, remains lacking. Here, we examine the influence of both assembly and post-assembly conditions on the water-ion pair interactions of poly(styrene sulfonate)/poly(diallyldimethylammonium) (PSS/PDADMA) PEMs in NaCl and KBr. This is accomplished by developing a methodology in which quartz crystal microbalance with dissipation monitoring is applied to estimate the number of water molecules affiliated with an ion pair (i), as well as the hydration coefficient, πsalt H2O. PSS/PDADMA PEMs are assembled in varying ionic strengths of either NaCl and KBr and then exposed post-assembly to increasing ionic strengths of matching salt type. A linear relationship between the total amount of water per intrinsic ion pair and the post-assembly salt concentration was obtained at post-assembly salt concentrations >0.5 M, yielding estimates for both i and πsalt H2O. We observe higher values of i and πsalt H2O in KBr-assembled PEMs due to KBr being more effective in doping the assembly because of KBr's more chaotropic nature as compared to NaCl. Lastly, when PSS is the terminating layer, i decreases in value due to PSS's hydrophobic nature. Classical and ab initio molecular dynamics provide a microstructural view as to how NaCl and KBr interact with individual polyelectrolytes and the involved water shells. Put together, this study provides further insight into the understanding of existing water microenvironments in PEMs and the effects of both assembly and post-assembly conditions.
RESUMO
The effect of urea and ethanol additives on aqueous solutions of poly(styrenesulfonate) (PSS), poly(diallyldimethylammonium) (PDADMA), and their complexation interactions are examined here via molecular dynamics simulations, interconnected laser Doppler velocimetry, and quartz crystal microbalance with dissipation. It is found that urea and ethanol have significant, yet opposite influences on PSS and PDADMA solvation and interactions. Notably, ethanol is systematically depleted from solvating the charge groups but condenses at the hydrophobic backbone of PSS. As a consequence of the poorer solvation environment for the ionic groups, ethanol significantly increases the extent of counterion condensation. On the other hand, urea readily solvates both polyelectrolytes and replaces water in solvation. For PSS, urea causes disruption of the hydrogen bonding of the PSS headgroup with water. In PSS-PDADMA complexation, these differences influence changes in the binding configurations relative to the case of pure water. Specifically, added ethanol leads to loosening of the complex caused by the enhancement of counterion condensation; added urea pushes polyelectrolyte chains further apart because of the formation of a persistent solvation shell. In total, we find that the effects of urea and ethanol rise from changes in the microscopic-level solvation environment and conformation resulting from solvating water being replaced by the additive. The differences cannot be explained purely via considering relative permittivity and continuum level electrostatic screening. Taken together, the findings could bear significance in tuning polyelectrolyte materials' mechanical and swelling characteristics via solution additives.
RESUMO
Molten-salt etching of Ti3AlC2 MAX phase offers a promising route to produce 2D Ti3C2Tz (MXene) nanosheets without hazardous HF. However, molten-salt etching results in MXene clays that are not water dispersible, thus preventing further processing. This occurs because molten-salt etching results in a lack of -OH terminal groups rendering the MXene clay hydrophobic. Here, we demonstrate a method that produces water-dispersible Ti3C2Tz nanosheets using molten salt (SnF2) to etch. In molten salt etching, SnF2 diffuses between the layers to form AlF3 and Sn as byproducts, separating the layers. The stable, aqueous Ti3C2Tz dispersion yields a ζ potential of -31.7 mV, because of -OH terminal groups introduced by KOH washing. X-ray diffraction and electron microscopy confirm the formation of Ti3C2Tz etched clay with substantial d-spacing as compared with clay etched with HF. This work is the first to use molten salt etching to successfully prepare colloidally stable aqueous dispersions of Ti3C2Tz nanosheets.
RESUMO
MXene/polymer composites have gained widespread attention due to their high electrical conductivity and extensive applications, including electromagnetic interference (EMI) shielding, energy storage, and catalysis. However, due to the difficulty of dispersing MXenes in common polymers, the fabrication of MXene/polymer composites with high electrical conductivity and satisfactory EMI shielding properties is challenging, especially at low MXene loadings. Here, we report the fabrication of MXene-armored polymer particles using dispersion polymerization in Pickering emulsions and demonstrate that these composite powders can be used as feedstocks for MXene/polymer composite films with excellent EMI shielding performance. Ti3C2Tz nanosheets are used as the representative MXene, and three different monomers are used to prepare the armored particles. The presence of nanosheets on the particle surface was confirmed by X-ray photoelectron spectroscopy and scanning electron microscopy. Hot pressing the armored particles above Tg of the polymer produced Ti3C2Tz/polymer composite films; the films are electrically conductive because of the network of nanosheets templated by the particle feedstocks. For example, the particle-templated Ti3C2Tz/polystyrene film had an electrical conductivity of 0.011 S/cm with 1.2 wt % of Ti3C2Tz, which resulted in a high radio frequency heating rate of 13-15 °C/s in the range of 135-150 MHz and an EMI shielding effectiveness of â¼21 dB within the X band. This work provides a new approach to fabricate MXene/polymer composite films with a templated electrical network at low MXene loadings.
RESUMO
MXenes, 2D nanomaterials derived from ceramic MAX phases, have drawn considerable interest in a wide variety of fields including energy storage, catalysis, and sensing. There are many possible MXene compositions due to the chemical and structural diversity of parent MAX phases, which can bear different possible metal atoms "M", number of layers, and carbon or nitrogen "X" constituents. Despite the potential variety in MXene types, the bulk of MXene research focuses upon the first MXene discovered, Ti3C2T. With the recent discovery of polymer/MXene multilayer assemblies as thin films and coatings, there is a need to broaden the accessible types of multilayers by including MXenes other than Ti3C2Tz; however, it is not clear how altering the MXene type influences the resulting multilayer growth and properties. Here, we report on the first use of MXenes other than Ti3C2Tz, specifically Ti2CTz and Nb2CTz, for the layer-by-layer (LbL) assembly of polycation/MXene multilayers. By comparing these MXenes, we evaluate both how changing M (Ti vs Nb) and "n" (Ti3C2Tzvs Ti2CTz) affect the growth and properties of the resulting multilayer. Specifically, the aqueous LbL assembly of each MXene with poly(diallyldimethylammonium) into films and coatings is examined. Further, we compare the oxidative stability, optoelectronic properties (refractive index, absorption coefficient, optical conductivity, and direct and indirect optical band gaps), and the radio frequency heating response of each multilayer. We observe that MXene multilayers with higher "n" are more electrically conductive and oxidatively stable. We also demonstrate that Nb2CTz containing films have lower optical band gaps and refractive indices at the cost of lower electrical conductivities as compared to their Ti2CTz counterparts. Our work demonstrates that the properties of MXene/polycation multilayers are highly dependent on the choice of constituent MXene and that the MXene type can be altered to suit specific applications.