Improving the Thermostability and Activity of Transaminase From Aspergillus terreus by Charge-Charge Interaction.

Transaminases that promote the amination of ketones into amines are an emerging class of biocatalysts for preparing a series of drugs and their intermediates. One of the main limitations of (R)-selective amine transaminase from Aspergillus terreus (At-ATA) is its weak thermostability, with a half-life (t 1/2) of only 6.9 min at 40°C. To improve its thermostability, four important residue sites (E133, D224, E253, and E262) located on the surface of At-ATA were identified using the enzyme thermal stability system (ETSS). Subsequently, 13 mutants (E133A, E133H, E133K, E133R, E133Q, D224A, D224H, D224K, D224R, E253A, E253H, E253K, and E262A) were constructed by site-directed mutagenesis according to the principle of turning the residues into opposite charged ones. Among them, three substitutions, E133Q, D224K, and E253A, displayed higher thermal stability than the wild-type enzyme. Molecular dynamics simulations indicated that these three mutations limited the random vibration amplitude in the two α-helix regions of 130-135 and 148-158, thereby increasing the rigidity of the protein. Compared to the wild-type, the best mutant, D224K, showed improved thermostability with a 4.23-fold increase in t 1/2 at 40°C, and 6.08°C increase in T 50 10 . Exploring the three-dimensional structure of D224K at the atomic level, three strong hydrogen bonds were added to form a special "claw structure" of the α-helix 8, and the residues located at 151-156 also stabilized the α-helix 9 by interacting with each other alternately.

A Single Mutation Increases the Thermostability and Activity of Aspergillus terreus Amine Transaminase.

Enhancing the thermostability of (R)-selective amine transaminases (AT-ATA) will expand its application in the asymmetric synthesis of chiral amines. In this study, mutual information and coevolution networks of ATAs were analyzed by the Mutual Information Server to Infer Coevolution (MISTIC). Subsequently, the amino acids most likely to influence the stability and function of the protein were investigated by alanine scanning and saturation mutagenesis. Four stabilized mutants (L118T, L118A, L118I, and L118V) were successfully obtained. The best mutant, L118T, exhibited an improved thermal stability with a 3.7-fold enhancement in its half-life (t1/2) at 40 °C and a 5.3 °C increase in T5010 compared to the values for the wild-type protein. By the differential scanning fluorimetry (DSF) analysis, the best mutant, L118T, showed a melting temperature (Tm) of 46.4 °C, which corresponded to a 5.0 °C increase relative to the wild-type AT-ATA (41.4 °C). Furthermore, the most stable mutant L118T displayed the highest catalytic efficiency among the four stabilized mutants.

Construction of stabilized (R)-selective amine transaminase from Aspergillus terreus by consensus mutagenesis.

Amine transaminases are a class of efficient and industrially-desired biocatalysts for the production of chiral amines. In this study, stabilized variants of the (R)-selective amine transaminase from Aspergillus terreus (AT-ATA) were constructed by consensus mutagenesis. Using Consensus Finder (http://cbs-kazlab.oit.umn.edu/), six positions with the most prevalent amino acid (over 60% threshold) among the homologous family members were identified. Subsequently, these six residues were individually mutated to match the consensus sequence (I77 L, Q97E, H210N, N245D, G292D, and I295 V) using site-directed mutagenesis. Compared to that of the wild-type, the thermostability of all six single variants was improved. The H210N variant displayed the largest shift in thermostability, with a 3.3-fold increase in half-life (t1/2) at 40 °C, and a 4.6 °C increase in T5010 among the single variants. In addition, the double mutant H210N/I77L displayed an even larger shift with 6.1-fold improvement of t1/2 at 40 °C, and a 6.6 °C increase in T5010. Furtherly, the H210N/I77L mutation was introduced into the previously engineered thermostable AT-ATA by the introduction of disulfide bonds, employing B-factor and folding free energy (ΔΔGfold) calculations. Our results showed that the combined variant H210N/I77L/M150C-M280C had the largest shift in thermostability, with a 16.6-fold improvement of t1/2 and a 11.8 °C higher T5010.

Adsorption of Cu(II) and Zn(II) Ions from Aqueous Solution by Gel/PVA-Modified Super-Paramagnetic Iron Oxide Nanoparticles.

Super-paramagnetic iron oxide nanoparticles (SPIONs)/gelatin (gel)/polyvinyl alcohol (PVA) nanoparticles were designed and synthesized by the co-precipitation method and further modified with gel and PVA. These nanoparticles were used for the removal of Cu(II) and Zn(II) from aqueous solutions. The adsorbents were rich in different functional groups for chemisorption and showed effective adsorption properties. The adsorption of Cu(II) and Zn(II) on the SPIONs/gel and SPIONs/gel/PVA materials were investigated with respect to pH, adsorption kinetics, and adsorption isotherms. The adsorption data was fitted to the Langmuir, Freundlich, and Sips models at the optimum pH 5.2 (±0.2) over 60 min; SPIONs/gel showed maximum adsorption capacities of 47.594 mg/g and 40.559 mg/g for Cu(II) and Zn(II); SPIONs/gel/PVA showed those of 56.051 mg/g and 40.865 mg/g, respectively. The experimental data fitted the pseudo-second-order model, indicating that the process followed chemical monolayer adsorption. In addition, the SPIONs/gel/PVA showed better stability and Cu(II) adsorption efficiency than SPIONs/gel.

Lactobacillus brevis CGMCC 1306 glutamate decarboxylase: Crystal structure and functional analysis.

Glutamate decarboxylase (GAD), which is a unique pyridoxal 5-phosphate (PLP)-dependent enzyme, can catalyze α-decarboxylation of l-glutamate (L-Glu) to γ-aminobutyrate (GABA). The crystal structure of GAD in complex with PLP from Lactobacillus brevis CGMCC 1306 was successfully solved by molecular-replacement, and refined at 2.2 Šresolution to an Rwork factor of 18.76% (Rfree = 23.08%). The coenzyme pyridoxal 5-phosphate (PLP) forms a Schiff base with the active-site residue Lys279 by continuous electron density map, which is critical for catalysis by PLP-dependent decarboxylase. Gel filtration showed that the active (pH 4.8) and inactive (pH 7.0) forms of GAD are all dimer. The residues (Ser126, Ser127, Cys168, Ile211, Ser276, His278 and Ser321) play important roles in anchoring PLP cofactor inside the active site and supporting its catalytic reactivity. The mutant T215A around the putative substrate pocket displayed an 1.6-fold improvement in catalytic efficiency (kcat/Km) compared to the wild-type enzyme (1.227 mM-1 S-1 versus 0.777 mM-1 S-1), which was the highest activity among all variants tested. The flexible loop (Tyr308-Glu312), which is positioned near the substrate-binding site, is involved in the catalytic reaction, and the conserved residue Tyr308 plays a vital role in decarboxylation of L-Glu.

Fabrication of perforated isoporous membranes via a transfer-free strategy: enabling high-resolution separation of cells.

Thin perforated membranes with ordered pores are ideal barriers for high-resolution and high-efficiency selective transport and separation of biological species. However, for self-assembled thin membranes with a thickness less than several micrometers, an additional step of transferring the membranes onto porous supports is generally required. In this article, we present a facile transfer-free strategy for fabrication of robust perforated composite membranes via the breath figure process, and for the first time, demonstrate the application of the membranes in high-resolution cell separation of yeasts and lactobacilli without external pressure, achieving almost 100% rejection of yeasts and more than 70% recovery of lactobacilli with excellent viability. The avoidance of the transfer step simplifies the fabrication procedure of composite membranes and greatly improves the membrane homogeneity. Moreover, the introduction of an elastic triblock copolymer increases the interfacial strength between the membrane and the support, and allows the preservation of composite membranes in a dry state. Such perforated ordered membranes can also be applied in other size-based separation systems, enabling new opportunities in bioseparation and biosensors.

[Studies on absorption kinetics characteristics of diterpenoid alkaloids in rats after oral administration of Sini Tang powder].

The purpose of this study was to investigate the absorption kinetics of aconitine, mesaconitine and hypaconitine in rats after oral administration of Sini Tang powder. With cannulate portal and jugular veins cannulated (double-cannulate), conscious moving rats were orally administered Sini Tang. Then samples of portal and systemic blood were collected at the designated periods of time and analyzed for aconitine, mesaconitine and hypaconitine by HPLC. Apparent absorption coefficient of aconitine, mesaconitine and hypaconitine was caculated respectively. The results indicated that the apparent absorption coefficient of aconitine, mesaconitine and hypaconitine come from Sini Tang were 0. 336, 0. 090, 0. 176, respectively, which had some differences among them. It was also suggested that double-cannulated rat was useful for estimating the absorption kinetics of aconitine, mesaconitine and hypaconitine after orally administered Sini Tang by determining the AUC values for drugs in portal and systemic blood samples. The three alkaloids could all be detected in blood, but the absorption differences were existed among the three alkaloids.