RESUMO
The development of a novel biocomposite of apatite (Ap) and collagen incorporating low-level additions of silicon (Si) as an osseopromotive agent is detailed. Designed to mimic the structural and compositional characteristics of developing bone, this composite is produced via a coprecipitation method, through which the weight percentage of Ap (i.e., the Ap/collagen ratio) can be varied. Coprecipitates produced at Ap contents of 80 wt % (Ap/collagen=4:1), 60 wt % (Ap/collagen=3:2), and 40 wt % (Ap/collagen=2:3) Ap showed markedly different morphologies, ranging from ceramic-like particulates to rope-like macro-fibrils; at all three Ap contents, however, the nanostructural features of the composites remained qualitatively indistinguishable, with equiaxed Ap nanocrystals distributed randomly throughout a matrix of amorphous collagen. Si incorporation was observed to occur preferentially in the collagenous phase-a result with potential impact on local controlled release of Si.
Assuntos
Substitutos Ósseos , Colágeno , Hidroxiapatitas , Nanoestruturas , Silício , Animais , Materiais Biocompatíveis/química , Substitutos Ósseos/síntese química , Substitutos Ósseos/química , Varredura Diferencial de Calorimetria , Colágeno/química , Colágeno/ultraestrutura , Hidroxiapatitas/química , Microscopia Eletrônica de Varredura , Nanoestruturas/ultraestrutura , Ovinos , Silício/química , Difração de Raios XRESUMO
Calcium phosphate (CaP) bioceramics have long been of interest for the unique properties that they exhibit as bone substitute materials. By harnessing the unique bone-bonding capacity of CaP's, biomaterials scientists have made great strides over the past 2 decades to produce novel materials to assist in the treatments of defects caused by trauma, disease, or both. In recent years, however, it has become apparent that the traditional set of techniques used to produce calcium phosphates does not satisfy all of the requirements necessary to meet the challenges of emerging applications. In particular, recent interest in (i) the synthesis of coprecipitated CaP/bioorganic composites and (ii) the investigation of the mechanisms of biomineralization has highlighted the need for new methods to control pH and CaP mass yield.
Assuntos
Materiais Biocompatíveis , Fosfatos de Cálcio , Concentração de Íons de Hidrogênio , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Substitutos Ósseos/síntese química , Substitutos Ósseos/química , Cálcio/química , Fosfatos de Cálcio/síntese química , Fosfatos de Cálcio/químicaRESUMO
Pertinent issues of collagen antigenicity and immunogenicity are concisely reviewed as they relate to the design and application of biomedical devices. A brief discussion of the fundamental concepts of collagen immunochemistry is presented, with a subsequent review of documented clinical responses to devices containing reconstituted soluble or solubilized collagen. The significance of atelocollagen, concerns regarding collagen-induced autoimmunity, and other relevant topics are also addressed in the context of current understanding of the human immune response to collagen.
Assuntos
Antígenos/imunologia , Colágeno/imunologia , Animais , Materiais Biocompatíveis/efeitos adversos , Reagentes de Ligações Cruzadas , Equipamentos e Provisões/efeitos adversos , HumanosRESUMO
INTRODUCTION: Alveolar bone resorption and atrophy of the mandible are a major challenge for regeneration medicine. In the present investigation, a collagen sponge that contained TGF-beta1 was placed at a mandibular defect and the osteogenic effects of collagen-TGF-beta1, complex were evaluated. MATERIAL AND METHODS: The Pm2, Pm3, and Pm4 teeth on both sides of the mandibles of 12 adult beagle dogs (9.0-12.0 kg) were extracted. After the extraction-site wounds healed, a bone defect (10.0 x 15.0 mm-wide, 10.0 mm-deep or 10.0 x 10.0 mm-wide, 10.0 mm-deep) was created on the mandible. A collagen sponge (10.0 x 10.0 x 10.0 mm) that contained TGF-beta1 (1.0 microg, 5.0 microg, or 10.0 microg, in physiological saline) was placed at the bottom of the defect and the overlying mucous membrane was sutured with 4-0 prolene. As a control, a collagen sponge that contained physiological saline only was placed in a defect on the opposite side. Two weeks after the surgery the wounds above the bone defects on both the control and TGF-beta1-treated sides had healed completely. RESULTS: At four, six, or eight weeks post-operatively animals were killed. Soft X-ray and bone-salt measurement analyses confirmed clearly that there was greater calcified bone formation in the defects into which TGF-beta1 had been incorporated than with the control defects. The implanted collagen sponges were fully resorbed and the bone tissue had regenerated from the bottom of the defects on the TGF-beta1, side by four weeks. On the control side, no such regeneration was observed. CONCLUSIONS: These results indicate that TGF-beta1, released slowly from a collagen sponge was effective in promoting bone remodeling when applied to mandibular defects in adult dogs.
Assuntos
Perda do Osso Alveolar/cirurgia , Regeneração Óssea/efeitos dos fármacos , Doenças Mandibulares/cirurgia , Fator de Crescimento Transformador beta/farmacologia , Perda do Osso Alveolar/patologia , Animais , Regeneração Óssea/fisiologia , Colágeno , Modelos Animais de Doenças , Cães , Portadores de Fármacos , Regeneração Tecidual Guiada Periodontal , Doenças Mandibulares/patologia , Distribuição Aleatória , Procedimentos de Cirurgia Plástica/métodos , Sensibilidade e Especificidade , Fator de Crescimento Transformador beta1 , Resultado do Tratamento , Cicatrização/efeitos dos fármacos , Cicatrização/fisiologiaRESUMO
We evaluated peripheral nerve regeneration using a novel artificial nerve conduit. The conduit was made of a polyglycolic acid(PGA) - collagen tube filled with laminin- soaked collagen sponge. We implanted this nerve conduit across an 80mm gap in the peroneal nerve of dogs. Histological observation 12 months after implantation showed numerous unmyelinated and myelinated nerve fibershad regenerated beyond the gap. Neurofilaments were widely observed immunohistochemically in the regenerated nerve segments. These findings indicated that newly regenerated axons had extended across the gap and connected into the distal nerve segments. Compound muscle action potentials(CMAPs) and somatosensory evoked potentials (SEPs) were recorded in all dogs. At 12 months, the CMAPs indicated complete recovery, while the SEPs showed incomplete but substantial recovery. Walking patterns had returned to near-normal 12 months after implantation. Use of this nerve conduit can lead to peripheral nerve elongation and favorable functional recovery across a wider nerve gap.
Assuntos
Colágeno , Laminina , Regeneração Nervosa , Nervo Fibular/fisiologia , Ácido Poliglicólico , Próteses e Implantes , Implantes Absorvíveis , Potenciais de Ação , Animais , Axônios/fisiologia , Materiais Biocompatíveis , Cães , Potenciais Somatossensoriais Evocados , Membro Posterior , Imuno-Histoquímica , Músculo Esquelético/inervação , Músculo Esquelético/fisiologia , Bainha de Mielina/fisiologia , Proteínas de Neurofilamentos/metabolismo , Nervo Fibular/citologia , Nervo Fibular/lesões , Nervo Fibular/metabolismoRESUMO
The present investigation examines the effect of coating thickness on the fatigue behaviour of hydroxyapatite (HA)-coated Ti-6Al-4V. Uniaxial fatigue tests were conducted on grit blasted Ti-6Al-4V coupons with HA coatings deposited by atmospheric plasma-spray at thicknesses of 0, 25, 50, 75, 100, and 150 microm, as well as on grit blasted specimens that had received a stress relieving heat treatment. Coupons with 150 microm HA coatings were shown to have significantly decreased fatigue resistances, with lives similar to those of the stress relieved specimens, while coatings of thickness 25-100 microm were found to have no affect on fatigue resistance. Residual stresses generated during deposition, cracks propagating towards the substrate from within the coating, and stress relief due to heat inputs from the spraying process were all considered with respect to their potential effects on fatigue behaviour. Stress relief in the substrate due to enhanced heat transfer mechanisms was identified as the most likely source of the observed reductions in substrate fatigue life in the 150 microm coupons.
Assuntos
Ligas/farmacologia , Materiais Biocompatíveis/química , Durapatita/química , Titânio/farmacologia , Análise de Variância , Relação Dose-Resposta a Droga , Temperatura Alta , Teste de Materiais , Microscopia Eletrônica de Varredura , Estresse Mecânico , Resistência à TraçãoRESUMO
The present investigation explores the effects of a 90-h post-deposition annealing treatment at 400 degrees C in air on the crystallographic and chemical properties of a plasma-sprayed hydroxyapatite (HA) coating, the thickness and composition of the interfacial oxide layer, and the fatigue behaviour of the underlying Ti-6Al-4V substrate. X-ray diffraction analysis revealed that significant recovery of the crystalline HA structure occurred as a result of the treatment, however, as compared with results obtained through treatment at higher temperatures, recovery obtained through use of the present treatment was incomplete. X-ray photoelectron spectroscopy analysis showed no changes in the constituents of the oxide layer, with the oxide species TiO2, Al2O3, V2O5, V2O3, and VO2 present on both the as-sprayed and the heat-treated substrates. A change in film thickness was observed, however, as evidenced by a change in colour from opaque bronze to dark purple. The fatigue resistance of the substrate was found to be significantly reduced by the heat treatment, with the lives of heat-treated coupons with coatings of all thicknesses closely resembling those of as-sprayed coupons with thick HA coatings and uncoated stress-relieved coupons presented in Part I of this study. Stress relief was identified as the most likely cause of these reductions.