[Prediction of the clinical supply of blood components in Xi'an City from 2023 to 2025].

Objective: To construct a prediction model for the clinical supply of blood components in Xi'an City from 2023 to 2025. Methods: Based on the blood supply data of the Blood Management Information System of Shaanxi Provincial Blood Center from January 2013 to December 2022, a gray prediction model and an exponential curve fitting model were used to construct the prediction model, and the optimal prediction model was determined according to the error parameters of the relevant indicators of the model. The supply of blood components in Xi'an from 2023 to 2025 was predicted. Results: The fitting equations of the exponential curve fitting model to predict the supply of suspended red blood cells, platelets and cryoprecipitate in Xi'an were, x（1）（t+1）=1.16e0.04t，x（1）（t+1）=1.04e0.12t and x（1）（t+1）=1.01e1.10t, respectively. The mean absolute errors (mean relative errors) of the exponential curve fitting model in predicting the supply of suspended red blood cells, platelets and cryoprecipitate in Xi'an were 10 488.7 (0.05%), 2 114.9 (0.08%) and 3 089.6 (0.07%), respectively, which were lower than those of the gray prediction model, about 10 488.7 (3.44%), 2 152.78 (8.20%) and 3 441.35 (7.92%), respectively. The exponential curve fitting model predicted that the clinical supply of blood components in Xi'an would increase year by year from 2023 to 2025, and the clinical supply of suspended red blood cells, platelets, and cryoprecipitate in Xi'an would increase to 409 467 U, 69 818 therapeutic volume and 94 724 U, respectively by 2025. Conclusion: The exponential curve fitting model can make a good prediction of the clinical supply of blood components in Xi'an City.

[Fabrication of a coral-like barium titanate nano-piezoelectric coating and its effect on promoting osteogenic differentiation of rat bone marrow mesenchymal stem cells in vitro].

Objective: To investigate the biocompatibility of coral-like barium titanate nano-piezoelectric coatings and the influence of ultrasound-excited piezoelectric effect on the early osteogenic differentiation. Methods: The barium titanate nano-piezoelectric coating (the coating group) was prepared on the surface of titanium metal by anodic oxidation, hydrothermal reaction and high-temperature annealing, and polished titanium specimens were used as control group. The surface morphology, composition, and crystal phase and hydrophilicity of the two groups of titanium specimens were characterized using scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and contact angle meter. The piezoelectric properties of the materials were characterized by piezoresponse force microscopy. Rat bone marrow mesenchymal stem cells (BMSC) were cultured and identified and seeded the surface of titanium specimens in two groups. The cells seeded on blank culture plates were used as blank group. After low intensity pulsed ultrasound intervention, cell proliferation and live/dead staining were detected to evaluate cytocompatibility of the coatings. Alkaline phosphatase (ALP) activity of each group was detected by ALP staining kit, and the expression of osteogenesis-related genes [integrin, bone morphogenetic protein 2 (BMP-2), Runt-related transcription factor 2 (RUNX2)] was detected by real-time fluorescent quantitative PCR (RT-qPCR) to evaluate the effect of the coating on promoting the early osteogenic differentiation of BMSC. Results: The surface of titanium specimens in the coating group showed a uniform coral-like morphology, and the diameter of the coral tentacles was 70-100 nm. The main component was tetragonal barium titanate. The surface hydrophilicity of the coating group (water contact angle 10.12°± 0.93°) was significantly better than that of the control group (water contact angle 78.32°±0.71°) (F= 10 165.91, P<0.001). The coating has a stable piezoelectric property with a piezoelectric constant of about 5 pC/N. Cell experiments showed that, with or without ultrasound, the cell proliferation activity of the coating group was significantly lower than that of the blank group and the control group on the third day (P<0.05). On the fifth day, with or without ultrasound, there was no significant difference in cell proliferation activity between the three groups (P>0.05). After 7 days of culture, the ALP activity of the coating group was significantly higher than that of the blank group and the control group (P<0.05). The results of RT-qPCR showed that the mRNA expression of integrin and BMP-2 in the coating group with ultrasound was significantly higher than that in the other groups with ultrasound, and was higher than that of the coating group without ultrasound (P<0.05). The expression of integrin mRNA in the control group with ultrasound was significantly higher than that in the control group without ultrasound (P<0.05). The expression of RUNX2 mRNA in the coating group with ultrasound was significantly higher than that in the coating group without ultrasound (P<0.05). Conclusions: The coral-like barium titanate nano-piezoelectric coating exhibits favorable biocompatibility and stable piezoelectric property, and facilitates the early osteogenic differentiation of BMSC under the excitation of low-intensity pulsed ultrasound.

[Risk prediction and function evaluation by T-cell epitope model and expression model of HLA-DPB1 mismatching in unrelated-donor hematopoietic stem cell transplantations].

Objective: To evaluate the risk prediction and assessment function of HLA-DPB1 T-cell epitope (TCE) model and expression model in human leukocyte antigen (HLA)-matched unrelated hematopoietic stem cell transplantation (MUD-HSCT) with HLA-DPB1 mismatching. Methods: A total of 364 (182 pairs) potential MUD-HSCT donors and recipients confirmed by HLA high-resolution typing in Shaanxi Blood Center from 2016 to 2019 were analyzed retrospectively. Of the 182 recipients, there were 121 males and 61 females with an average age of (26.3±14.2) years. Of the 182 donors, there were 148 males and 34 females with an average age of (33.7±7.5) years. Polymerase chain reaction-sequence-based typing (PCR-SBT), next-generation sequencing (NGS) and polymerase chain reaction-sequence specific oligonucleotide probe (PCR-SSO) based on LABScan®3D platform were used for high-resolution typing of HLA-A, B, C, DRB1, DQB1, DPB1 gene, and PCR-SBT was used for single nucleotide polymorphism (SNP) typing. TCE model and expression model were used to predict and evaluate the HLA-DPB1 mismatch pattern and acute graft-versus-host-disease (aGVHD) risk. Results: A total of 26 HLA-DPB1 alleles and their 3'-UTR rs9277534 SNP genotypes were detected in this study population, and two new alleles HLA-DPB1*1052∶01 and HLA-DPB1*1119∶01 were found and officially named. The overall mismatch rate of HLA-DPB1 in MUD-HSCT donors and recipients was 90.66% (165/182). In TCE model, the HLA-DPB1 mismatch rates of permissible mismatch (PM) and non-permissible mismatch (non-PM) were 47.80% (87/182) and 42.86% (78/182), respectively. The non-PM in GvH direction was 13.73% (25/182), and which in HvG direction was 29.12% (53/182). A total of 73 pairs of donors and recipients in TCE model met the evaluation criteria of expression model. Among of TCE PM group, recipient DP5 mismatches accounted for 34.25% (25/73) were predicted as aGVHD high risk according to expression model. For the TCE non-PM group, both the recipient DP2 mismatches of 6.85% (5/73) and recipient DP5 mismatches of 10.86% (8/73) were predicted to be at high risk for aGVHD. Risk prediction by TCE model and expression model was 27.27% concordant and 16.97% unconcordant. Conclusions: TCE model and expression model are effective tools to predict aGVHD risk of MUD-HSCT. Comprehensive application of the two models is helpful to the hierarchical assessment of HSCT risk.

[Research progress on drug resistance of anti-varicella-zoster virus drugs].

Varicella-zoster virus (VZV) causes chickenpox when it first infects humans, and the virus may reactivate in adulthood and cause herpes zoster (HZ). Broad-spectrum antiviral drugs are one of the treatments for varicella and herpes zoster, but the emergence of drug resistance poses many challenges to this treatment and increases the burden of disease on patients. This paper discusses the resistance mechanisms, resistance sites and resistance detection methods of anti-VZV drugs in order to help further research on new anti-VZV targets, new drugs and monitoring of resistance to existing drugs.

[Digitalized analysis of the gingival and bone morphology in the maxillary anterior teeth in patient with posterior dental implant].

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.

[Digital analysis of the correlation between gingival thickness and alveolar bone thickness in the maxillary anterior teeth region].

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.

[Pink esthetic defects of restoration in anterior teeth and the treatment protocol].

How to achieve the esthetic results with the restoration in anterior teeth is key aims which both of dentists and patients concern about now. Previously, the shape, color and texture of the teeth, i.e. "white esthetics" , were main objectives that prosthodontists want to achieve. The development of dental materials has played a key role in this field. More and more, the prosthodontist has realized that the healthy soft tissue is also very important for the final esthetic results. The healthy periodontal tissue is not only the basis for the longevity of restoration, but also the basis of esthetic results. The shape, color and texture of soft tissue, the mesial and distal gingival papilla, the margin and symmetry of the gingival, i.e. "pink esthetics" , have ultimate relationship with final esthetic results. The objective of the article is to introduce the common pink esthetic defects for the restorations in anterior teeth, the treatment protocol and methods to improve pink esthetic results.

A circulating serum miRNA panel as early detection biomarkers of cervical intraepithelial neoplasia.

OBJECTIVE: MicroRNAs (miRNAs) have been demonstrated to play critical roles in regulating the molecular process of tumorigenesis. Therefore, the purpose of this study was to establish a panel of serum miRNA signature for early detection of cervical intraepithelial neoplasia (CIN). PATIENTS AND METHODS: One hundred and twenty-six patients with CIN and sixty healthy control subjects were recruited in this cohort study. Quantitative reverse transcript polymerase chain reaction (qRT-PCR) was conducted to detect the expression level of the panel of miRNA signature (miR-9, miR-10a, miR-20a and miR-196a) in the serum samples of all the participants. The association between HPV infection status and the expression levels of miRNAs was also evaluated. In addition, Receiver Operating Characteristic (ROC) curve was used to evaluate the diagnostic value of the combination of these four serum miRNAs. RESULTS: The expression levels of the four miRNAs (miR-9, miR-10a, miR-20a and miR-196a) were all significantly upregulated in the serum samples derived from the CIN patients compared with those from the healthy controls (p < 0.01). Also, HPV infection status was significantly correlated with the expression levels of miRNAs (p < 0.01). The ROC analysis showed that this four-miRNA signature showed high accuracy in discriminating CIN individuals (AUC = 0.886, p < 0.01) from healthy controls. CONCLUSIONS: Taken together, our findings demonstrated that the panel of four serum miRNAs (miR-9, miR-10a, miR-20a and miR-196a) are useful and novel noninvasive biomarkers for early detection of CIN.

Clinical significance of serum miR-196a in cervical intraepithelial neoplasia and cervical cancer.

Previous studies have reported that miR-196a is upregulated in cervical cancer tissues and cell lines. However, whether serum miR-196a is increased in patients with cervical cancer or cervical intraepithelial neoplasia (CIN), and its potential clinical value remained unknown. In total, 105 cervical cancer patients, 86 CIN patients, and 50 healthy volunteers were recruited. Quantitative reverse transcription-polymerase chain reaction was performed to compare the serum levels miR-196a in all participants. The associations between serum miR-196a and CIN grade/clinicopathological parameters of cervical cancer were also examined. A survival analysis was performed using the Kaplan-Meier method. Univariate and multivariate analyses were conducted to explore the independent risk factors for cervical cancer. Our results revealed that serum miR-196a levels were higher in patients with cervical cancer (P < 0.01) and CIN (P < 0.05) compared to those in healthy controls. Serum miR-196a was associated with CIN grade and various cervical cancer parameters including tumor size (P = 0.031), lymph node metastasis (P = 0.018), FIGO stage (P = 0.004), and grade (P = 0.011). Cervical cancer patients with higher serum miR-196a levels had a poorer overall survival rate (P = 0.004). Multivariate analysis revealed that high serum miR-196a was an independent predictor for poor survival of cervical cancer (HR = 3.510; 95%CI = 1.961-6.874; P = 0.025). In conclusion, our findings suggest that serum miR-196a overexpression is associated with CIN grade and cervical cancer progression. Therefore, serum miR-196a may be a reliable biomarker for early detection and prognosis of cervical cancer.

Hantavirus infection in rodents and haemorrhagic fever with renal syndrome in Shaanxi province, China, 1984-2012.

The transmission of haemorrhagic fever with renal syndrome (HFRS) is deeply influenced by the reservoir and hantavirus prevalence rate. In this study, a surveillance on human HFRS cases, relative rodent abundance, and hantavirus infection prevalence was conducted in Shaanxi province, China, during 1984-2012. A generalized linear model with Poisson-distributed residuals and a log link was used to quantify the relationship between reservoir, virus and HFRS cases. The result indicated that there was a significant association of HFRS incidence with relative rodent density and the prevalence rate. This research provides evidence that the changes of infection prevalence in the reservoir could lead directly to the emergence of a new epidemic. It was concluded that the measurement of a number of these variables could be used in disease surveillance to give useful advance warning of potential disease epidemics.