A Polymer Acceptor with Grafted Small Molecule Acceptor Unit for Efficient All Polymer Organic Solar Cells.

A polymer acceptor, named PX-1, is  designed and synthesized using a polymerization strategy with grafted small molecule acceptors. This design approach allows for the freedom of end groups while maintaining efficient terminal packing, enhancing π-π interactions, and facilitating charge transport. All-polymer organic solar cells based on PM6: PX-1 demonstrate a promising efficiency of 13.55%. The result presents an alternative pathway for the design of high-efficiency polymer acceptors through the careful regulation of small molecule acceptor monomers and linker units.

A rare case of brominated small molecule acceptors for high-efficiency organic solar cells.

Given that bromine possesses similar properties but extra merits of easily synthesizing and polarizing comparing to homomorphic fluorine and chlorine, it is quite surprising very rare high-performance brominated small molecule acceptors have been reported. This may be caused by undesirable film morphologies stemming from relatively larger steric hindrance and excessive crystallinity of bromides. To maximize the advantages of bromides while circumventing weaknesses, three acceptors (CH20, CH21 and CH22) are constructed with stepwise brominating on central units rather than conventional end groups, thus enhancing intermolecular packing, crystallinity and dielectric constant of them without damaging the favorable intermolecular packing through end groups. Consequently, PM6:CH22-based binary organic solar cells render the highest efficiency of 19.06% for brominated acceptors, more excitingly, a record-breaking efficiency of 15.70% when further thickening active layers to ~500 nm. By exhibiting such a rare high-performance brominated acceptor, our work highlights the great potential for achieving record-breaking organic solar cells through delicately brominating.

Reduced Nonradiative Recombination Energy Loss Enabled Efficient Polymer Solar Cells via Tuning Alkyl Chain Positions on Pendent Benzene Units of Polymers.

Nonradiative recombination energy loss (ΔE3) plays a key role in enhancing device efficiencies for polymer solar cells (PSCs). Until now, there is no clear resolution for reducing ΔE3 via molecular design. Herein, we report two conjugated polymers, PBDB-P-p and PBDB-P-m, which are integrated from benzo[1,2-b:4,5-b']dithiophene with alkylthio chain substituted at para- or meta-position on pendent benzene and benzo[1,2-c:4,5-c']dithiophene-4,8-dione. Both the polymers have different temperature-dependent aggregation properties but similar molecular energy levels. When BO-4Cl was used as an acceptor to fabricate PSCs, the device of PBDB-P-p:BO-4Cl displayed a maximal power conversion efficiency (PCE) of 13.83%, while the best device of PBDB-P-m:BO-4Cl exhibited a higher PCE of 14.12%. The close JSCs and fill factors in both PSCs are attributed to their formation of effective nanoscale phase separation as confirmed by atomic force microscopy measurements. We find that the PBDB-P-m-based device has 1 order of magnitude higher electroluminescence quantum efficiency (EQEEL) than in the PBDB-P-p-based one, which could arise from the relatively weak aggregation in the PBDB-P-m-based film. Thus, the PBDB-P-m-based device has a remarkably enhanced VOC of 0.86 V in contrast to 0.80 V in the PBDB-P-p-based device. This study offers a feasible structural optimization way on the alkylthio side chain substitute position on the conjugated polymer to enhance VOC by reducing nonradiative recombination energy loss in the resulting PSCs.

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency.

Optimizing the molecular structures of organic photovoltaic (OPV) materials is one of the most effective methods to boost power conversion efficiencies (PCEs). For an excellent molecular system with a certain conjugated skeleton, fine tuning the alky chains is of considerable significance to fully explore its photovoltaic potential. In this work, the optimization of alkyl chains is performed on a chlorinated nonfullerene acceptor (NFA) named BTP-4Cl-BO (a Y6 derivative) and very impressive photovoltaic parameters in OPV cells are obtained. To get more ordered intermolecular packing, the n-undecyl is shortened at the edge of BTP-eC11 to n-nonyl and n-heptyl. As a result, the NFAs of BTP-eC9 and BTP-eC7 are synthesized. The BTP-eC7 shows relatively poor solubility and thus limits its application in device fabrication. Fortunately, the BTP-eC9 possesses good solubility and, at the same time, enhanced electron transport property than BTP-eC11. Significantly, due to the simultaneously enhanced short-circuit current density and fill factor, the BTP-eC9-based single-junction OPV cells record a maximum PCE of 17.8% and get a certified value of 17.3%. These results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.

A Carbonylated Terthiophene-Based Twisted Polymer for Efficient Ternary Polymer Solar Cells.

In polymer solar cells (PSCs), it is difficult for twisted conjugated polymers to achieve high power-conversion efficiency (PCE) as donors due to their low charge carrier mobilities and poor bulk heterojunction morphologies. In this work, a new twisted conjugated polymer (P3TCO-1) with excellent solubilities (above 30 mg mL-1 ) in common organic solvents at room temperature is reported. UV-visible absorption spectra and cyclic voltammetry indicate that P3TCO-1 has a wide optical bandgap of 1.90 eV and deep HOMO level of -5.39 eV. In binary PSCs, P3TCO-1:ITIC-based device shows a PCE of 10.11%, with JSC of 17.05 mA cm-2 and FF of 62.89%; P3TCO-1:PC71 BM-based device gives a PCE of 6.67% with JSC of 12.31 mA cm-2 and FF of 58.00%. When the two acceptors of ITIC and PC71 BM are combined, the twisted P3TCO-1-based ternary PSCs exhibit a significantly boosted PCE of up to 11.41%, with a simultaneously improved JSC of 18.16 mA cm-2 and FF of 66.78%. These results can guide the improvement of PCE for twisted conjugated polymer-based PSCs.